Component Component |
|---|
|
Capacity Capacity |
|---|
|
|
Seal Material Seal Material |
|---|
|
Design-Your-Own Sealed Dispensers
Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids. Not for use with fuels or solvents.
Containers and lids are all interchangeable.
Spout extenders are used with the lids with twist-open spout. They allow controlled pouring in hard-to-reach areas.
Pumps are used with the lids with threaded cap. They dispense approximately 2.8 oz. per stroke. Pumps cannot be used with the 64-oz. container.
Hose kit is used with the heavy duty pump. It allows you to fill the container without removing the lid. You can also use it to attach the container to threaded machinery fill points.
Breather vent screws into the inlet on the heavy duty pump to protect against contaminants.
Reducer nozzle is used with either the standard or heavy duty pump to reduce the hose outlet for controlled dispensing.
| Cap. | Dia. | Ht. | Mouth OD | Graduation Marks | Material | Color | Max. Temp., °F | Each | |
| 64 oz. | 6 5/8" | 8 3/4" | 4 7/8" | 1/4 qt., 0.25 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 000000 |
| 96 oz. | 6 3/4" | 10 1/2" | 4 7/8" | 1/4 qt., 0.25 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
| 1 1/4 gal. | 7" | 11" | 4 7/8" | 1/2 qt., 0.5 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
| 2 1/2 gal. | 9 3/4" | 13 3/4" | 4 7/8" | 1/2 qt., 0.5 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
Lids | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Replacement Seal Kits | ||||||||||
| Component | For Mouth OD | Opening Dia. | Lg. | Lid Material | Seal Material | Max. Temp., °F | Choose a Lid Color | Each | Each | ||
| Lid | 4 7/8" | __ | __ | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 000000 | 000000 | 00 | |
| Lid with Threaded Cap | 4 7/8" | __ | __ | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 000000 | 00 | |
| Lid with Twist-Open Spout | 4 7/8" | 1/4" | 5" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 00000 | |
| Lid with Twist-Open Spout | 4 7/8" | 1/2" | 8" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 0000 | |
| Lid with Twist-Open Spout | 4 7/8" | 1" | 5" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 0000 | |
Pumps | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Outlet | Inlet | Replacement Seal Kits | |||||||||||||||
| Component | Max. Viscosity, cP | Flow Rate, oz./stroke | Nozzle OD | Hose Lg., ft. | Hose Material | Seal Material | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Max. Temp., °F | Each | Each | ||
| Pump | 400 | 2.8 | 1/2" | 5 | PVC Plastic | Buna-N Rubber | 1/4 | NPT | Male | __ | __ | __ | 175° | 0000000 | 000000 | 0000000 | 00000 |
| Heavy Duty Pump | 600 | 2.8 | 1/2" | 5 | PVC Plastic | Viton® Fluoroelastomer Rubber | 1/4 | NPT | Male | 1/4 | NPT | Male | 175° | 0000000 | 000000 | 0000000 | 00000 |
Nozzle | ||||
|---|---|---|---|---|
| OD | Material | Max. Temp., °F | Each | |
| 1/4" | Polyethylene Plastic | 175° | 0000000 | 00000 |
Nozzle | Outlet | Inlet | Hose | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Material | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Material | Reinforcement Material | Max. Temp., °F | Each | |
5-ft. Lg. | ||||||||||||
| 1/2" | Aluminum | __ | __ | __ | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 000000 |
| __ | __ | 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
10-ft. Lg. | ||||||||||||
| 1/2" | Aluminum | __ | __ | __ | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
| __ | __ | 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
Outlet | Inlet | Hose | 5-ft. Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Inlet Gender | Material | Reinforcement Material | Removes Particle Size Down To, microns | Max. Temp., °F | Includes | Each | |
| 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 10 | 175° | 1/4 NPT Male Adapter, Breather Vent | 0000000 | 000000 |
| Removes Particle Size Down To, microns | Max. Temp., °F | Each | |
| 10 | 175° | 0000000 | 000000 |