For Testing For Testing |
|---|
|
|
Minimum Oxidation Reduction Potential (ORP) Minimum OxidationReduction Potential (ORP) |
|---|
|
Maximum Oxidation Reduction Potential (ORP) Maximum OxidationReduction Potential (ORP) |
|---|
|
Maximum Automatic Temperature Compensation (ATC) Maximum AutomaticTemperature Compensation (ATC) |
|---|
|
|
Meter Type Meter Type |
|---|
|
Minimum Automatic Temperature Compensation (ATC) Minimum AutomaticTemperature Compensation (ATC) |
|---|
|
|
For Use With For Use With |
|---|
|
Chemistry Sensors
A bayonet connection makes these sensors compatible with most chemistry meters and controllers.
Threaded sensors have an NPT male connection for installation in pipes and tanks.
| Mount Type (Connection) | Oxidation Reduction Potential (ORP) Range | Temp. Range, °F | Sensor Material | For Use With | Choose a Cable Lg., ft. | Each | |
| Hand Held | -1,999 to 1,999 mV | 32° to 140° | Glass | Clean Liquids, Dirty Liquids | 00000000 | 0000000 | |
| Threaded (NPT Male 3/4) | -1,999 to 1,999 mV | 32° to 140° | Glass | Clean Liquids, Dirty Liquids | 00000000 | 000000 |
Water-Resistant Multifunction Chemistry Meters
Test three different water-chemistry measurements in dirty, wet conditions. These meters have a housing that meets IP57 for good resistance to dust and protection from temporary submersion. Often used in pools and spas, they are for clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.
Chlorine, oxidation reduction potential (ORP), and pH meter comes with three sensors that each take one chemistry measurement.
| Sensor Material | Automatic Temperature Compensation (ATC) Range, °F | Specifications Met | Batteries Included | Each | |
For Use With Clean Liquids | |||||
|---|---|---|---|---|---|
| Glass | 23° to 194° | CE Marked, IP57 | Yes | 0000000 | 0000000 |
Remote-Reading Multifunction Chemistry Meters
Remote sensors let you take pH and oxidation reduction potential (ORP) readings up to 3 feet from the display. For use with clean liquids, this meter is often used for water-quality testing. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.
pH | Oxidation Reduction Potential (ORP) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Sensor Material | Range | Accuracy | Range | Accuracy | Automatic Temperature Compensation (ATC) Range, °F | Specifications Met | Batteries Included | Each | |
For Use With Clean Liquids | |||||||||
| Glass | 0 to 14 pH | ±0.01 pH | -1,000 to 1,000 mV | ±2 mV | 32° to 212° | CE Marked | Yes | 0000000 | 0000000 |
| Replacement sensor for testing Oxidation Reduction Potential (ORP) | 0000000 | Each | 0000000 |
Remote-Reading Multifunction
Chemistry Meters with PC Output
Upload up to 500 conductivity and total dissolved solids (TDS) readings to a PC. This meter has a probe on a 3-ft. cable for taking readings in hard-to-reach areas. It's for use with tap water, pool water, hydroponic solutions, and other clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Data hold freezes the current reading on the display. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.
Meters | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Conductivity | Total Dissolved Solids (TDS) | Replacement Sensors | |||||||||
| Sensor Material | Range | Accuracy | Range | Accuracy | Automatic Temperature Compensation (ATC) Range, °F | Specifications Met | Batteries Included | Each | Each | ||
For Use With Clean Liquids | |||||||||||
| Nonglass | 0 to 19.99 µS 0 to 199.9 µS 0 to 1,999 µS 0 to 19.99 mho 0 to 199.9 mho | ±1% | 0 to 9.99 ppm 10 to 99.9 ppm 100 to 999 ppm 1 to 9.99 ppt 10 to 99.9 ppt | ±1% | -17° to 230° | CE Marked | Yes | 00000000 | 0000000 | 00000000 | 0000000 |
Easy-Read Bench-Top Multifunction Chemistry Meters
Don’t strain your eyes reading a scale—these bench-top meters indicate exact results on the digital display. For complete resistance to dust and protection from temporary submersion, these meters float and have a housing that meets NEMA 6 and IP67. They're for use with water and other clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.
Meters | Replacement Sensors | |||||||
|---|---|---|---|---|---|---|---|---|
| For Testing | Sensor Material | Automatic Temperature Compensation (ATC) Range, °F | Specifications Met | Batteries Included | Each | Each | ||
For Use With Clean Liquids | ||||||||
| Conductivity, Oxidation Reduction Potential (ORP), pH, Resistivity, Total Dissolved Solids (TDS) | Glass | 32° to 160° | CE Marked, IP67, NEMA 6 | Yes | 000000 | 000000000 | 000000 | 0000000 |
Water-Resistant ORP Meters
Since this oxidation reduction potential (ORP) meter has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion, it’s often used to determine a solution’s ability to break down contaminants in harsh field conditions. For use with dirty liquids containing heavy metals, sulfides, and harsh chemicals, this meter is often used for wastewater treatment. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.
ORP Meters
Measure a solution’s oxidation reduction potential (ORP) to determine its ability to break down contaminants. This meter is commonly used to monitor water quality in pools, spas, and other clean liquids. Use a Calibration Solution (not included) and the calibration adjustment screw to maintain accuracy.
Oxidation Reduction Potential (ORP) | |||||
|---|---|---|---|---|---|
| Sensor Material | Range | Accuracy | Batteries Included | Each | |
For Use With Dirty Liquids | |||||
| Nonglass | -999 to 999 mV | ±2 mV | Yes | 0000000 | 000000 |
Remote-Reading pH Meters with PC Output
Transmit pH readings to a PC for analysis. This meter has a sensor on a 3-ft. cable for taking remote readings of water and other clean liquids. It has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate readings in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.