Filter by
Fastener Head Type
System of Measurement
Material
Tip Type
For Use In
Threading
Finish
Tapping Method
Export Control Classification Number (ECCN)
DFARS Specialty Metals
RoHS
About Tapping Screws
More
Stainless Steel Slotted Oval Head Screws for Wood
18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. A decorative rounded top provides a finished appearance. Screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Screws may be mildly magnetic. Length is measured from the edge of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel  | ||||||||||
No. 4 | ||||||||||
| 1/2" | 0.225" | 0.104" | 3/64" | 1/16" | 22 | Partially Threaded | 0.333" | 100 | 000000000 | 000000 |
| 5/8" | 0.225" | 0.104" | 3/64" | 1/16" | 22 | Partially Threaded | 0.417" | 100 | 000000000 | 00000 |
| 3/4" | 0.225" | 0.104" | 3/64" | 1/16" | 22 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
| 1" | 0.225" | 0.104" | 3/64" | 1/16" | 22 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
No. 5 | ||||||||||
| 3/4" | 0.252" | 0.116" | 1/16" | 5/64" | 20 | Partially Threaded | 0.5" | 50 | 000000000 | 0000 |
No. 6 | ||||||||||
| 3/8" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.25" | 100 | 000000000 | 00000 |
| 1/2" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.333" | 100 | 000000000 | 00000 |
| 5/8" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.417" | 50 | 000000000 | 0000 |
| 3/4" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.552" | 50 | 000000000 | 0000 |
| 7/8" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.583" | 50 | 000000000 | 0000 |
| 1" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.833" | 50 | 000000000 | 00000 |
| 1 1/2" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
| 2" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 1.333" | 25 | 000000000 | 00000 |
No. 8 | ||||||||||
| 1/2" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.333" | 50 | 000000000 | 0000 |
| 5/8" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.417" | 50 | 000000000 | 0000 |
| 3/4" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.5" | 50 | 000000000 | 00000 |
| 1" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.833" | 50 | 000000000 | 00000 |
| 1 1/2" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
No. 10 | ||||||||||
| 5/8" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 0.417" | 25 | 000000000 | 00000 |
| 3/4" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 0.5" | 25 | 000000000 | 00000 |
| 1" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 0.76" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 0.833" | 50 | 000000000 | 00000 |
| 1 1/2" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
| 2" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 1.333" | 25 | 000000000 | 00000 |
No. 12 | ||||||||||
| 3/4" | 0.438" | 0.2" | 7/64" | 1/8" | 11 | Partially Threaded | 0.5" | 25 | 000000000 | 0000 |
| 1" | 0.438" | 0.2" | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 25 | 000000000 | 00000 |
| 1 1/2" | 0.438" | 0.2" | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
No. 14 | ||||||||||
| 1" | 0.507" | 0.232" | 7/64" | 9/64" | 10 | Partially Threaded | 0.667" | 10 | 000000000 | 0000 |
| 1 1/4" | 0.507" | 0.232" | 7/64" | 9/64" | 10 | Partially Threaded | 0.833" | 10 | 000000000 | 0000 |
| 1 1/2" | 0.507" | 0.232" | 7/64" | 9/64" | 10 | Partially Threaded | 1" | 10 | 000000000 | 0000 |
| 2" | 0.507" | 0.232" | 7/64" | 9/64" | 10 | Partially Threaded | 1.333" | 10 | 000000000 | 00000 |
Brass Slotted Oval Head Screws for Wood
Brass screws are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. A decorative rounded top provides a finished appearance. Screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the edge of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Brass | ||||||||||
No. 4 | ||||||||||
| 1/2" | 0.225" | 0.104" | 3/64" | 1/16" | 22 | Partially Threaded | 0.333" | 100 | 000000000 | 00000 |
| 3/4" | 0.225" | 0.104" | 3/64" | 1/16" | 22 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
No. 5 | ||||||||||
| 3/4" | 0.252" | 0.116" | 1/16" | 5/64" | 20 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
No. 6 | ||||||||||
| 1/2" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.333" | 100 | 000000000 | 00000 |
| 5/8" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.417" | 100 | 000000000 | 00000 |
| 3/4" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
| 1" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
| 1 1/4" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 0.833" | 50 | 000000000 | 00000 |
| 1 1/2" | 0.279" | 0.128" | 1/16" | 5/64" | 18 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
No. 8 | ||||||||||
| 3/4" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.5" | 50 | 000000000 | 00000 |
| 1" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 0.833" | 50 | 000000000 | 00000 |
| 1 1/2" | 0.332" | 0.152" | 5/64" | 3/32" | 15 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
No. 10 | ||||||||||
| 1" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 0.833" | 25 | 000000000 | 00000 |
| 1 1/2" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
| 2" | 0.385" | 0.176" | 3/32" | 7/64" | 13 | Partially Threaded | 1.333" | 10 | 000000000 | 0000 |
Phillips Oval Head Screws for Wood
A decorative rounded top provides a finished appearance. These screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the edge of the head.
Brass screws are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.
Zinc-plated steel screws are corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Brass | |||||||||||
No. 6 | |||||||||||
| 1/2" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.333" | 100 | 000000000 | 000000 |
| 5/8" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.417" | 100 | 000000000 | 00000 |
| 3/4" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
| 1" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
| 1 1/4" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.833" | 50 | 000000000 | 00000 |
| 1 1/2" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
No. 8 | |||||||||||
| 3/4" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
| 1" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 0.833" | 50 | 000000000 | 00000 |
| 1 1/2" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
No. 10 | |||||||||||
| 1" | 0.385" | 0.176" | No. 2 | 3/32" | 7/64" | 13 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.385" | 0.176" | No. 2 | 3/32" | 7/64" | 13 | Partially Threaded | 0.833" | 25 | 000000000 | 00000 |
| 1 1/2" | 0.385" | 0.176" | No. 2 | 3/32" | 7/64" | 13 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
| 2" | 0.385" | 0.176" | No. 2 | 3/32" | 7/64" | 13 | Partially Threaded | 1.25" | 25 | 000000000 | 00000 |
No. 5 | |||||||||||
| 1" | 0.252" | 0.116" | No. 2 | 1/16" | 5/64" | 20 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
Zinc-Plated Steel | |||||||||||
No. 6 | |||||||||||
| 5/8" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.417" | 100 | 000000000 | 0000 |
| 3/4" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
| 1" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
| 1 1/4" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 0.833" | 100 | 000000000 | 00000 |
| 1 1/2" | 0.279" | 0.128" | No. 2 | 1/16" | 5/64" | 18 | Partially Threaded | 1" | 100 | 000000000 | 00000 |
No. 8 | |||||||||||
| 3/4" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
| 1" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
| 1 1/4" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 0.833" | 50 | 000000000 | 0000 |
| 1 1/2" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 1" | 50 | 000000000 | 0000 |
| 2" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 1.333" | 50 | 000000000 | 00000 |
| 2 1/4" | 0.332" | 0.152" | No. 2 | 5/64" | 3/32" | 15 | Partially Threaded | 1.5" | 25 | 000000000 | 00000 |
No. 10 | |||||||||||
| 3/4" | 0.385" | 0.176" | No. 3 | 3/32" | 7/64" | 13 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
| 1" | 0.385" | 0.176" | No. 3 | 3/32" | 7/64" | 13 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
| 1 1/4" | 0.385" | 0.176" | No. 3 | 3/32" | 7/64" | 13 | Partially Threaded | 0.833" | 100 | 000000000 | 00000 |
| 1 1/2" | 0.385" | 0.176" | No. 3 | 3/32" | 7/64" | 13 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
| 1 3/4" | 0.385" | 0.176" | No. 3 | 3/32" | 7/64" | 13 | Partially Threaded | 1.167" | 25 | 000000000 | 00000 |
| 2" | 0.385" | 0.176" | No. 3 | 3/32" | 7/64" | 13 | Partially Threaded | 1.333" | 100 | 000000000 | 00000 |