Protect your hands from intermittent exposure to extreme heat during jobs that don't require high dexterity. Mitts are more convenient to put on and take off than gloves. Holding heavy objects may decrease temperature rating.

Kevlar aramid/fiberglass blend mitts have good dexterity.

PBI/Kevlar aramid blend mitts provide better abrasion resistance than the Kevlar aramid/fiberglass blend.

Zetex and Zetex Plus mitts protect hands from exposure to nearby flames and heat.

Protect your hands from intermittent exposure to flames and radiant heat up to 2000° F. Made from the same material used in race car drivers' fire suits, these gloves won't ignite, burn, or melt. They are lightweight, breathable, and moisture absorbing.

These flexible leather gloves protect your hands from intermittent direct contact with objects or surfaces heated up to 500° F. The more layers of self-extinguishing fabric between the leather and the lining, the longer a glove can withstand exposure to heat. Holding heavy objects may decrease temperature rating.

Used in firefighting and similar severe duty applications, these fire-retardant gloves meet OSHA, CAL-OSHA, and NFPA requirements. Flexible and durable, they protect your hands in high-temperature applications. Holding heavy objects may decrease temperature rating.

Cowhide gloves remain soft after repeated soakings.

Cowhide and pigskin gloves have cowhide on the back of the glove and pigskin on the palm. Pigskin is more abrasion resistant than cowhide.

Also known as wave solder gloves, wear these to avoid damaging static-sensitive electronic parts. They have a nitrile coating that protects hands while soldering.

The lining withstands intermittent heat, while the outer layer of material acts as a barrier to chemicals and solvents. All of these gloves have a textured surface on the fingers and palm for added grip.

Neoprene gloves with a cotton or fleece lining handle higher temperatures than nitrile/neoprene gloves, but they’re also thicker. They’re FDA compliant for use with food.

Use these pads to protect your hands from intermittent exposure to direct heat when handling hot items. Made of flexible silicone, the textured slip-resistant surface provides a secure grip.

Use these sleeves alone or with gloves to protect your arms from heat.

Kevlar aramid/fiberglass blend sleeves are abrasion resistant. Open cuffs are convenient to put on and take off. Fasten the wrist snap for a closer fit. Sleeves with an adjustable strap can be tightened around the upper arm to keep them in place.

Nomex aramid sleeves are breathable and cool down quickly after removal from a hot surface. They have knit cuffs for a secure fit.

Protect your hands from intermittent handling of hot objects. All of these gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade. Holding heavy objects may decrease temperature rating.

Nitrile-coated cotton gloves provide a good grip on oily surfaces.

Kevlar aramid gloves absorb moisture.