Curved and straight track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors. Combine track, mounting brackets, and hangers that fit the same inside track width to create a system. Some components that fit together are rated for different capacities; the capacity of your system is determined by the component with the lowest capacity.

All brackets mount to ceiling joists or hang from threaded rod. One support bracket is required for every 4 ft. of 100-lb. capacity track and every 5 ft. of 600-lb. capacity track. Joint brackets hold adjoining sections of track together. Wall-mount adapter bracket converts a support or joint bracket into a wall-mount bracket.

Hangers with eyebolt and hook are for use on curtains and strip doors. Two hangers per curtain or strip door are required. Hangers with hook connect to holes in curtains and strip doors. Hangers with eyebolts connect to curtains and strip doors using S-hooks (not included).

Hangers with bolt and mounting plate are for use on doors. All have a vertical adjustment to adjust the distance between the bottom of the track and the top of the door. Two hangers per door are required. Hangers with bolt attach through the top of your door. Hangers with mounting plate attach to the side and top of your door.

End stop prevents hangers from rolling off the track.

Pull trolley bolts onto the leading edge of a curtain or strip door and has a pull cord.

For technical drawings and 3-D models, click on a part number.