Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps.

These lubricated PTFE fiber seals stand up to most chemicals. Use them in pumps and valves.

Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps.

These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications.

These seals require lighter packing pressure than standard oil- and water-resistant packing seals, so they cause less friction and reduce shaft wear. They’re made of graphite-impregnated aramid fiber and are for use in pumps and valves.

Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps.

Synthetic yarn that’s comparable in strength to aramid is combined with graphite for soft seals that dissipate heat away from the shaft to extend the life of pumps.

Use these graphite-impregnated graphite seals for steam applications in pumps and valves.

The Inconel-wire reinforcement in these expanded-graphite yarn seals ensures they keep their shape longer than the High-Flexibility Steam-Resistant Packing Seals. Use them for steam applications in valves.

Install between layers of packing seals to ensure lubricants are distributed evenly. These lubricating rings are also known as lantern rings.

Super thin and flexible, these cotton yarn seals fit into tight spaces, such as in faucets.

Protect fragile items with this cushioning wrap.

This wrap clings to itself but not the item being wrapped, and continues to adhere after multiple uses.

You only need one free hand to tear a sheet of wrap from the box.

Create custom-fitted packaging for products of almost any size or shape. When activated, foam packs expand to fill the space around items.

Guide peanuts into a shipping container. A valve controls the flow.

This paper is good as an outer wrap for parcels or as packing fill. Also known as kraft paper.

Also known as freezer paper, this paper is appropriate for food contact. A polyethylene coating on one side provides resistance to moisture and tearing.

Use these liners between pallets or layers of stacked material, or to reinforce the bottom of shipping boxes.

These pallet liners have a layer of hexagonal cells instead of typical corrugation, so they distribute loads better than standard cardboard liners.

Also known as newsprint, this paper is a clean, low-cost fill material.

Shield shafts and threaded parts from abrasion and chipping.

No need for a separate dispenser—these rolls already have dispensing handles.

This wrap has already been stretched so it won't decrease in width during application, meaning a stronger bind and fewer trips around to cover the load.

This film has a corrosion inhibitor built-in to shield metal contents from corrosion.

The powered platform on these dispensers turns a pallet while stretch wrap unrolls for effortless coverage.

Made from a blended material for a longer life, these are the strongest and most durable shipping blankets we offer.

These inflatable paper bags prevent tipping and provide a cushion between products to reduce damage during transit.

Protect silver- and gold-plated electronic components from tarnish.

This film is thicker than standard heat-shrink film, so it's ideal for large and irregularly shaped objects.

An adhesive closure on one end of these pouches secures documents inside.

An opening on one side provides easy access to documents, even after the pouch is applied.

Cut a pouch from the roll and apply.

Quickly identify containers that have been tipped during transit.

Label hazardous materials with these D.O.T. and ORM-D paper labels.

Adjust these tubes by twisting the two halves. A hexagonal end prevents rolling.

Close these tubes with a cap on each end.

Because of their square shape, these tubes can be stacked, and the flat surface is easier to label than a round surface.

Slide the 6" long cap onto one end; the other end has a permanent steel cap.

Because of their square shape, these tubes won't roll away. They can be stacked, and the flat surface is easier to label than a round surface.

Slip these buckles onto strapping as you tighten.

Lighter and safer than metal strapping, plastic strapping is also more flexible.

These tensioners apply extreme tension on plastic strapping to hold it tight around packages. They hold the bottom strap and tension the top strap by winding it around a take-up wheel.

These kits come with plastic strapping and tools to secure it around packages.

Capable of securing 15 straps per minute, these mobile tensioners/sealers save you time and energy.

These tools use heat to secure strapping without crimping on a seal.

Also known as crimpers, sealers secure seals onto metal strapping.

These tensioners apply maximum tension to pull strapping more tightly around packages than standard tensioners for metal strapping.

These kits with metal strapping have tools to tension and secure strapping around pallet loads, crates, and packages.

Use this metal strapping for securing pipe coverings as well as for packaging.

These plastic protectors have a ridged channel to hold strapping in place.

Made of plastic with a lip that fits over your boxes, these covers shield the top and edges of your load from impact and indentation from strapping.

These dispensers keep strapping coils neat and ready to use.

These boxes meet ECT 32 (32 lbs. per inch), which is comparable to a 200-lb. burst strength.

With two walls for more support, these are the strongest cardboard boxes. They meet ECT 51 (51 lbs. per inch), which is comparable to a 275-lb. burst strength.

Contain small parts and samples.

A foam lining prevents static build-up to protect static-sensitive materials.

These bags have white space so you can clearly write a message or label contents.

A layer of bubble wrap cushions contents, providing the convenience of a bag with the protection of bubble wrap.

Provide multilayered protection for static-sensitive electronic components.

These bags offer the fastest, most effective removal of static electricity of all our press-to-close bags.

Shield ferrous and nonferrous metals from the environment.

A twist tie and brass grommet on the sealed end are convenient for hanging tags and instructions.

A coating on these bags prevents tarnishing of precious metals.

An additive in the material prevents static discharge from building up on the bag's surface.

These bags shrink when heated for a skin-tight barrier around material.

Free up space in work areas with these convenient, self-stick plastic bags.

Cut bags off the roll to the length you need.

These plastic bags are more moisture resistant than paper bags.

The zipper provides a more secure seal than press-to-close bags and closes easily, even when you’re wearing gloves.

These bags have a white space so you can clearly write a message or label contents.

Contain liquids without fear of a leak. For a leakproof seal, turn the bag top over the double-wire closure three times and fold in the wire ends.

The closure strip for these envelopes is built-in. A paper-filled liner cushions contents.

A puncture-resistant lining with 1/8" air bubbles protects contents.

These envelopes are made of bubble wrap with 3/16” bubbles to cushion contents.

Use these bags with Vacuum Heat Sealers to create an airtight seal around items.

Cover a wide area to seal large or irregularly shaped packages.

Clamp shut the jaws to seal bags.

Use the shelf to hold work while pushing down on the foot pedal to create a seal. Also known as impulse sealers, these sealers use a timer that regulates the length of the heating cycle.

These containers include many layers of packaging to give you the best leak protection for hazardous liquids.

Also known as closed-head pails, these round jugs have a small top opening. They safely ship hazardous liquids.

These pails come matched with UN-specified lids.

These jugs have a security ring on the lid that separates when the jug is opened.

Add a lid to safely ship with these pails.

Prevent the absorption of harsh solvents, cleaning agents, and adhesives with these jugs. They have a security ring on the lid that separates when the jug is opened.

Pull material out of tight spots. Similar to removing a cork from a bottle, the tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling.

Replace tips when they become worn or to use a different style. The corkscrew tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling.