Cam Latch Type Cam Latch Type |
|---|
|
Push-to-Close Latch Type Push-to-Close Latch Type |
|---|
|
Material Material |
|---|
|
Mounting Style Mounting Style |
|---|
 |  |
| Through Hole | Surface |
Opens With Opens With |
|---|
 | Handle |
Turn Direction Turn Direction |
|---|
|
Latching Distance Latching Distance |
|---|
|
|
|
Finish Finish |
|---|
|
For Maximum Padlock Shackle Diameter For Maximum PadlockShackle Diameter |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Push-to-Close Latches
More
About Cam Latches and Locks
More
Extra-Reach L-Handle Padlockable Cam Latches
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets. The handle and latch are each sold separately. Select the turn direction of the latch when mounting the cam.
For technical drawings and 3-D models, click on a part number.
Handle | Mounting Plate | Mounting | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Lg. | Wd. | Projection | Shaft Lg. | For Max. Padlock Shackle Dia. | Ht. | Wd. | Fasteners Included | Screw Size | No. of | Dia. | Ctr.-to-Ctr. | For Use On | Each | |
Zinc-Plated Steel—Dull | ||||||||||||||||
| 3" | 1/2" | 6 7/8" | 7/8" | 1 7/8" | 3 3/4" | 1/2" | 2 3/4" | 2 1/4" | No | No. 10 | 3 | 1/4" | 1 7/8", 1 1/2" | Metal, Plastic, Wood | 0000000 | 000000 |
304 Stainless Steel—Dull | ||||||||||||||||
| 3" | 1/2" | 6 1/16" | 7/8" | 1 13/16" | 3 1/4" | 7/16" | 3 1/2" | 2" | No | No. 10 | 4 | 7/32" | 2 1/4", 1 1/2" | Metal, Plastic, Wood | 0000000 | 00000 |
Washdown L-Handle Padlockable Cam Latches
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns. Select the turn direction when mounting the cam. Each latch comes with a straight cam and two nonreversible offset cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | ||
Black Painted Zinc | ||||||||||||||||
| A | 5/16" | 3/8", 3/4", 1 3/16" | 7/8" | 4 1/8" | 1" | 2" | 5/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 000000 |
Chrome-Plated Zinc—Polished | ||||||||||||||||
| A | 5/16" | 3/8", 3/4", 1 3/16" | 7/8" | 4 1/8" | 1" | 2" | 5/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 00000000 | 00000 |
316 Stainless Steel—Dull | ||||||||||||||||
| B | 5/16" | 11/16", 13/16", 1 1/16" | 7/8" | 4 1/2" | 1 1/8" | 1 9/16" | 3/8" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Yes | Metal | IP65 | 0000000 | 00000 |
Washdown Wing-Handle Padlockable Cam Latches
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated. They come with different cams to accommodate different latching distances.
Latches with four nonreversible offset cams work with padlocks that have a 1/4" shackle diameter. They have a set turn direction.
Latches with one straight cam and two nonreversible offset cams accommodate padlocks with 3/16" and 3/8" shackle diameters. Select the turn direction of the latch when mounting the cam.
For technical drawings and 3-D models, click on a part number.
Handle | Offset Cam | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Thick. | Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Turn Direction | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Four Nonreversible Offset Cams | ||||||||||||||
Black Powder-Coated Zinc | ||||||||||||||
| 7/32" | 15/16", 1 3/16", 1 7/16", 1 21/32" | 7/8" | 2 3/16" | 1" | 15/16" | 1/4" | 1 3/4" | 3/4" | Quarter-Turn Clockwise to Open | Yes | Metal | IP65, NEMA 4 | 00000000 | 000000 |
| 7/32" | 15/16", 1 3/16", 1 7/16", 1 21/32" | 7/8" | 2 3/16" | 1" | 15/16" | 1/4" | 1 3/4" | 3/4" | Quarter-Turn Counterclockwise to Open | Yes | Metal | IP65, NEMA 4 | 00000000 | 00000 |
One Straight Cam and Two Nonreversible Offset Cams | ||||||||||||||
Black Painted Zinc | ||||||||||||||
| 5/16" | 11/16", 13/16", 1 1/16" | 7/8" | 2" | 1/2" | 13/16" | 3/16", 3/8" | 1 3/4" | 3/4" | Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | Yes | Metal | IP65 | 00000000 | 00000 |
316 Stainless Steel | ||||||||||||||
| 5/16" | 11/16", 13/16", 1 1/16" | 7/8" | 2" | 1/2" | 13/16" | 3/16", 3/8" | 1 3/4" | 3/4" | Quarter-Turn Clockwise to Open or Half-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open or Half-Turn Counterclockwise to Open | Yes | Metal | IP65 | 00000000 | 00000 |
Padlockable Cam Latches
Select the turn direction of these latches when mounting the cam. Each latch comes with two straight cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | Latching Distance | For Through Hole Dia. | Wd. | Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Each | |
Black Powder-Coated Zinc | |||||||||||
| 1 1/8" | 1/2", 7/8" | 3/4" | 1" | 1" | 3/8" | 7/8", 1 1/4" | 3/4" | Yes | Metal, Plastic, Wood | 0000000 | 000000 |
Chrome-Plated Zinc—Polished | |||||||||||
| 1 1/8" | 1/2", 7/8" | 3/4" | 1" | 1" | 3/8" | 7/8", 1 1/4" | 3/4" | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
L-Handle Padlockable Multipoint Latches for Heavy Doors
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. This padlockable latch has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the latch when mounting the cam.
Handle | Mounting Hole Ctr.-to-Ctr. | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Door Ht. | Latching Distance | For Through Hole Dia. | Lg. | Proj. | Inside Lg. | Rear Proj. | For Max. Padlock Shackle Dia. | Straight Cam Lg. | Handle Plate | Latch Plate | Fasteners Included | Screw Size | For Use On | Each | |
Through-Hole Mount | ||||||||||||||||
Zinc-Plated Steel—Dull | ||||||||||||||||
| 5" | 27"-90" | 1 1/2" | 7/8" | 7 1/2" | 2 1/4" | 9 1/4" | 2 3/8" | 7/16" | 3 1/16" | 7 3/8", 1 1/4" | 3 1/8", 2 3/4" | No | 1/4" | Metal | 0000000 | 0000000 |
Padlockable Push-to-Close Latches with Handle
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame. Latches have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | (A) | (B) | (C) | (D) | (E) | (F) | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Each | ||
Chrome-Plated Zinc—Polished | ||||||||||||||
| 1 | 0" to 3/8" | 5 15/16" | 2 1/16" | 13/16" | 1 3/8" | 1 1/2" | 1/2" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 000000 |
| 1 | 3/4" to 1 1/4" | 5 15/16" | 2 1/16" | 13/16" | 1 3/8" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 00000 |
304 Stainless Steel—Polished | ||||||||||||||
| 1 | 0" to 5/16" | 5 1/4" | 2" | 13/16" | 1 5/16" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 00000 |
| 1 | 5/8" to 1 1/4" | 5 1/4" | 2" | 13/16" | 1 5/16" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 00000 |
| 2 | 0" to 3/8" | 5 1/4" | 2 5/16" | 1 1/4" | 1 3/4" | 2 1/16" | 3/4" | 2 1/16" | 2 1/16" | 1/4" | No | No. 10 | 000000 | 000000 |
| 2 | 0" to 1/2" | 4 1/4" | 2 1/2" | 1 3/8" | 1 3/32" | 1 5/8" | 5/8" | 1 5/8" | 1 5/8" | 1/4" | No | No. 8 | 000000 | 000000 |
| 2 | 1/2" to 1 1/4" | 5 1/4" | 2 5/16" | 1 1/4" | 1 3/4" | 2 1/16" | 3/4" | 2 1/16" | 2 1/16" | 1/4" | No | No. 10 | 000000 | 000000 |
| 2 | 9/16" to 1 1/4" | 4 1/4" | 2 1/2" | 1 3/8" | 1 3/32" | 1 5/8" | 5/8" | 1 5/8" | 1 5/8" | 1/4" | No | No. 8 | 000000 | 000000 |
Edge-Mount Padlockable Push-to-Close Latches with Handle
Attach this padlockable latch vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame. Latch has an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Min. Door Offset | Lg. | Projection | (A) | (B) | (D) | (E) | For Max. Padlock Shackle Dia. | Location | Fasteners Included | Screw Size | Each | |
Chrome-Plated Zinc—Dull | ||||||||||||
| 3/4" | 9 5/16" | 1 15/16" | 3 3/4" | 3/4" | 7/16" | 1 9/16" | 5/16" | Door Edge | No | No. 10 | 000000 | 0000000 |
Padlockable Push-to-Close Latches with Emergency Release Handle
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure. Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Latches have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Emergency Release | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | For Max. Padlock Shackle Dia. | (A) | (B) | (C) | (D) | (E) | (F) | Handle Material | Rod Material | Fasteners Included | Screw Size | Each | ||
Chrome-Plated Zinc—Polished | ||||||||||||||||
| 1 | 0" to 3/16" | 11 3/4" | 4" | 5/16" | 3 5/16" | 2 7/8" | 3 3/8" | 1 1/4" | 3 1/4" | 3 1/4" | Steel | Steel | No | 1/4" | 000000 | 0000000 |
| 1 | 1 3/8" to 1 7/8" | 11 3/4" | 4" | 5/16" | 3 5/16" | 2 7/8" | 3 3/8" | 1 1/4" | 3 1/4" | 3 1/4" | Steel | Steel | No | 1/4" | 000000 | 000000 |
Gray Painted Iron | ||||||||||||||||
| 2 | 0" to 1/2" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Iron | Steel | No | 1/4" | 0000000 | 00000 |
| 2 | 0" to 11/16" | 10 3/4" | 4 1/8" | 11/32" | 1 15/16" | 3" | 3" | 1 1/2" | 3 1/8" | __ | Iron | Steel | No | No. 10 | 0000000 | 000000 |
| 2 | 5/8" to 1 1/4" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Iron | Steel | No | 1/4" | 0000000 | 00000 |
| 2 | 11/16" to 1 1/2" | 10 3/4" | 4 1/8" | 11/32" | 1 15/16" | 3" | 3" | 1 1/2" | 3 1/8" | __ | Iron | Steel | No | No. 10 | 0000000 | 000000 |
304 Stainless Steel—Polished | ||||||||||||||||
| 2 | 0" to 1/2" | 8" | 3 7/16" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Stainless Steel | Stainless Steel | No | 1/4" | 0000000 | 000000 |
| 2 | 5/8" to 1 1/4" | 8" | 3 7/16" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Stainless Steel | Stainless Steel | No | 1/4" | 0000000 | 000000 |
| Replacement Steel Handle | 000000 | Each | 000000 |