Material Material |
|---|
|
Removes Particle Size Down To Removes ParticleSize Down To |
|---|
|
|
About Filters and Particle Sizes
More
Cone Paint and Resin Strainers
Pour paint, lacquer, and resin through these strainers to remove lumps, flakes, dust, and other contaminants for a high-quality finish. They’re made of a polyester mesh for better filtration than cotton strainers, which often contain loose fibers. These cone-shaped strainers are wide enough at the top for easy pouring from quart-sized paint cans.
Use strainers that remove particles down to 226 microns with latex and oil-based paints for a smooth finish when painting.
Choose strainers that remove particles down to 190 microns for thinner liquids such as lacquer, enamels, and 3D printer resins. Filtering the fine particles found in resin tanks will improve the quality of your 3D print.
Stands are sturdy—they hold strainers in place, so you can filter liquids quickly and without a mess.
Can-Sized Paint Strainers
The elastic on these strainers stretches to fit around the top of a one- or five-gallon container. Pour paint through them and remove to strain out lumps, flakes, and dust.
Filters for Spray Booths
These economical filters hold contaminants while allowing proper airflow.
Fiberglass filters provide moderate efficiency.
Fiberglass filters with polyester backing are thicker than standard fiberglass filters—the layer of polyester increases efficiency.
Expanded paper filters are more efficient than fiberglass filters. They are made of layered paper.
| Lg. | Wd. | Thick. | Pkg. Qty. | Pkg. | |
Fiberglass | |||||
|---|---|---|---|---|---|
| 20" | 20" | 2" | 25 | 00000000 | 000000 |
| 25" | 20" | 2" | 25 | 00000000 | 00000 |
| 200ft. | 24" | 2 1/2" | 1 | 00000000 | 000000 |
| 200ft. | 48" | 2 1/2" | 1 | 00000000 | 000000 |
Fiberglass with Polyester Plastic Backing | |||||
| 20" | 20" | 3 1/2" | 20 | 0000000 | 00000 |
| 25" | 20" | 3 1/2" | 20 | 0000000 | 00000 |
| 200ft. | 24" | 3 1/2" | 1 | 0000000 | 000000 |
Expanded Paper | |||||
| 20" | 20" | 1/2" | 25 | 00000000 | 00000 |
| 20" | 20" | 1/2" | 70 | 00000000 | 00000 |
| 25" | 20" | 1/2" | 25 | 00000000 | 00000 |
| 25" | 20" | 1/2" | 70 | 00000000 | 00000 |
| 40ft. | 45" | 1/2" | 1 | 00000000 | 00000 |
High-Efficiency Filters for Spray Booths
The most efficient spray booth filters we offer, these filters are made of polyester for moisture resistance.
Filter Cartridges for Adhesives, Ink, and Paint
Thick liquids such as adhesives and paint are no problem for these cartridges. They are made of acrylic and polyester that are bonded into one solid piece for high strength and durability. Use them in a filter housing to reduce contaminants in your line.
| OD | ID | Removes Particle Size Down To, microns | Max. Temp., °F | End Type | Max. Flow Rate, gpm | Each | |
9 3/4" Height | |||||||
|---|---|---|---|---|---|---|---|
Acrylic Plastic and Polyester Plastic—Solid | |||||||
| 2 9/16" | 1" | 5 | 250° | Open on Both Ends | 5 | 0000000 | 00000 |
| 2 9/16" | 1" | 10 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 25 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 50 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 75 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 125 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
10" Height | |||||||
Acrylic Plastic and Polyester Plastic—Solid | |||||||
| 2 9/16" | 1" | 5 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 10 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 25 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 50 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 75 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
| 2 9/16" | 1" | 125 | 250° | Open on Both Ends | 5 | 0000000 | 0000 |
20" Height | |||||||
Acrylic Plastic and Polyester Plastic—Solid | |||||||
| 2 9/16" | 1" | 5 | 250° | Open on Both Ends | 10 | 0000000 | 00000 |
| 2 9/16" | 1" | 10 | 250° | Open on Both Ends | 10 | 0000000 | 00000 |
| 2 9/16" | 1" | 25 | 250° | Open on Both Ends | 10 | 0000000 | 00000 |
| 2 9/16" | 1" | 50 | 250° | Open on Both Ends | 10 | 0000000 | 00000 |
| 2 9/16" | 1" | 75 | 250° | Open on Both Ends | 10 | 0000000 | 00000 |
| 2 9/16" | 1" | 125 | 250° | Open on Both Ends | 10 | 0000000 | 00000 |