The cleanest, safest way to blast. These blasters turn liquid CO₂ into dry ice pellets that remove paint, grease, and dirt—without releasing harmful abrasive media into the surrounding air. Since the pellets turn to gas on contact, there's no media left behind to clean up.

Ideal for light surface prep on metals, the dry ice pellets won't scratch or etch your material. Adjust the pressure and spray width for small or large surfaces, and fine-tune your settings in real time using feedback from the display. Do a test run before using these blasters on soft plastics, since the pellets may leave behind a texture. Opt for a blasting setup with conventional media for tough removal of heavy coatings, corrosion, or scale.

You don't need to order pellets to get started. The built-in pelletizer converts liquid CO₂ into blasting media as you work. Connect a 50 lb. or 75 lb. CO₂ tank with siphon tubes (sold separately). The system draws CO₂ only when you pull the trigger, so quick jobs won't drain your tank. Any unused CO₂ can be stored for later jobs. Set these blasters up in any well-ventilated space.

These air purifiers roll to where you need them.

A dolly with casters makes it easy to move these parts washers around your facility. Turn on the pump, and solution will flow to the flexible metal spigot and polyethylene hose with flow-through brush. Washers have a filter that removes large particles to keep the solution cleaner longer and a heater to increase the cleaning power. A fusible link closes the cover in the event of a fire.

Note: Do not use with flammable liquids.