Filter by
Body Material
Maximum Pressure @ Temperature
Ball Material
Diverting Valve Flow Pattern
End-to-End Length
DFARS Specialty Metals
About On/Off Valves
More
Panel-Mount Threaded On/Off Valves
Access the handle of these valves while protecting your line behind an instrument panel. They have threads and a hex nut below the handle for panel mounting.
316 stainless steel valves are more corrosion resistant than brass valves.
Valves with an anchored ball are best for high-pressure applications where flow would push the ball in a standard ball valve. The ball in these valves is secured at both ends to create a tight seal and reduce the effort needed to open and close these valves.
Full-port valves do not restrict flow. Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Straight
Female × Female
Male × Female
Male × Male
- Valve Type: Ball
- For Use With:
316 Stainless Steel: Water, Oil, Air, Nitrogen
Brass: Water, Oil, Air - Seal Material: See table
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Seal Material | Port Type | End-to-End Lg. | Panel Cutout Dia. | Features | Each | |
Brass Body | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||||||
| 1/8 × 1/8 | 1.4 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Full | 1 13/16" | 9/16" | __ | 0000000 | 000000 |
| 1/4 × 1/4 | 1.4 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Full | 1 13/16" | 9/16" | __ | 0000000 | 00000 |
| 3/8 × 3/8 | 2.7 | 1000 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 2 1/4" | 9/16" | __ | 0000000 | 00000 |
| 1/2 × 1/2 | 2.7 | 1000 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 2 3/8" | 9/16" | __ | 0000000 | 000000 |
| 3/4 × 3/4 | 6.1 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 3 9/16" | 13/16" | __ | 00000000 | 000000 |
NPT Male × NPT Female | |||||||||||
| 1/8 × 1/8 | 1.4 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 1 7/8" | 9/16" | __ | 00000000 | 00000 |
| 1/4 × 1/8 | 1.3 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 1 15/16" | 9/16" | __ | 0000000 | 00000 |
| 1/4 × 1/4 | 1.5 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 1 15/16" | 9/16" | __ | 00000000 | 00000 |
| 3/8 × 1/4 | 1.5 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 2" | 9/16" | __ | 0000000 | 00000 |
| 3/8 × 3/8 | 2.7 | 1000 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 2 5/16" | 9/16" | __ | 0000000 | 00000 |
| 1/2 × 1/2 | 2.7 | 1000 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 2 1/2" | 9/16" | __ | 0000000 | 00000 |
NPT Male × NPT Male | |||||||||||
| 1/8 × 1/8 | 1.4 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Full | 1 15/16" | 9/16" | __ | 0000000 | 00000 |
| 1/4 × 1/4 | 1.4 | 1500 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Full | 2" | 9/16" | __ | 0000000 | 00000 |
| 3/8 × 3/8 | 1.4 | 1000 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 2 1/8" | 9/16" | __ | 0000000 | 00000 |
| 1/2 × 1/2 | 2.7 | 1000 psi @ 70° F | -30° to 295° | 29 | Fluoroelastomer Rubber | Standard | 2 5/8" | 9/16" | __ | 0000000 | 000000 |
| 3/4 × 3/4 | 4.5 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 3 11/16" | 13/16" | __ | 00000000 | 000000 |
BSPP Female × BSPP Female | |||||||||||
| 1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
BSPT Female × BSPT Female | |||||||||||
| 1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
316 Stainless Steel Body | |||||||||||
NPT Female × NPT Female | |||||||||||
| 1/8 × 1/8 | 0.5 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 1 5/8" | 19/32" | __ | 00000000 | 00000 |
| 1/8 × 1/8 | 1 | 10000 psi @ 70° F | -15° to 400° | Not Rated | Fluoroelastomer Rubber | Standard | 2 15/16" | 29/32" | Anchored Ball | 00000000 | 000000 |
| 1/8 × 1/8 | 1.2 | 3000 psi @ 70° F | -30° to 295° | Not Rated | PTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
| 1/8 × 1/8 | 1.2 | 6000 psi @ 70° F | -30° to 295° | Not Rated | PCTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
| 1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | Not Rated | PTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
| 1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/16" | 25/32" | __ | 00000000 | 000000 |
| 1/4 × 1/4 | 0.9 | 6000 psi @ 70° F | -30° to 295° | Not Rated | PCTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
| 1/4 × 1/4 | 1 | 10000 psi @ 70° F | -30° to 445° | 29 | PEEK Plastic | Standard | 3 15/16" | 7/8" | Anchored Ball | 00000000 | 000000 |
| 3/8 × 3/8 | 0.6 | 3000 psi @ 70° F | -30° to 295° | Not Rated | PTFE Plastic | Standard | 2 3/4" | 3/4" | __ | 00000000 | 000000 |
| 3/8 × 3/8 | 0.6 | 6000 psi @ 70° F | -30° to 295° | Not Rated | PCTFE Plastic | Standard | 2 3/4" | 3/4" | __ | 00000000 | 000000 |
| 1/2 × 1/2 | 6.3 | 3000 psi @ 70° F | -30° to 295° | Not Rated | PTFE Plastic | Standard | 3 7/16" | 13/16" | __ | 00000000 | 000000 |
| 1/2 × 1/2 | 6.3 | 6000 psi @ 70° F | -30° to 295° | Not Rated | PCTFE Plastic | Standard | 3 7/16" | 13/16" | __ | 00000000 | 000000 |
| 3/4 × 3/4 | 6.1 | 3000 psi @ 70° F | -30° to 295° | Not Rated | PTFE Plastic | Standard | 3 9/16" | 13/16" | __ | 00000000 | 000000 |
NPT Male × NPT Male | |||||||||||
| 1/8 × 1/8 | 1.5 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 11/16" | 3/4" | __ | 00000000 | 000000 |
| 1/4 × 1/4 | 1.2 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 3" | 3/4" | __ | 00000000 | 000000 |
BSPP Female × BSPP Female | |||||||||||
| 1/8 × 1/8 | 1.2 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
| 1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/2" | 3/4" | __ | 00000000 | 000000 |
BSPP Male × BSPP Male | |||||||||||
| 1/4 × 1/4 | 1.2 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 3" | 3/4" | __ | 0000000 | 000000 |
BSPT Female × BSPT Female | |||||||||||
| 1/8 × 1/8 | 0.5 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 1 5/8" | 19/32" | __ | 00000000 | 000000 |
| 1/4 × 1/4 | 0.9 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 2 1/16" | 25/32" | __ | 00000000 | 000000 |
| 1/2 × 1/2 | 6.3 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 3 7/16" | 13/16" | __ | 00000000 | 000000 |
| 3/4 × 3/4 | 6.1 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 3 9/16" | 13/16" | __ | 00000000 | 000000 |
BSPT Male × BSPT Male | |||||||||||
| 1/4 × 1/4 | 1.2 | 3000 psi @ 70° F | -30° to 295° | 29 | PTFE Plastic | Standard | 3" | 3/4" | __ | 0000000 | 000000 |
Elbow
Male × Male
Female × Female
Male × Female
- Valve Type: Ball
- For Use With:
316 Stainless Steel: Water, Oil, Air, Nitrogen
Brass: Water, Oil, Air - Seal Material:
316 Stainless Steel: PTFE Plastic
Brass: Fluoroelastomer Rubber
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||||
| 1/8 × 1/8 | 1.5 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 15/16" | 9/16" | 0000000 | 000000 |
| 1/4 × 1/4 | 1.5 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 15/16" | 9/16" | 0000000 | 00000 |
| 3/8 × 3/8 | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/8" | 9/16" | 0000000 | 00000 |
| 1/2 × 1/2 | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 3/16" | 9/16" | 0000000 | 00000 |
NPT Male × NPT Female | |||||||||
| 1/4 × 1/4 | 1.5 | 1500 psi @ 70° F | -30° to 295° | 29 | Standard | 13/16" | 9/16" | 00000000 | 00000 |
| 1/2 × 1/2 | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/8" | 9/16" | 0000000 | 00000 |
NPT Male × NPT Male | |||||||||
| 1/8 × 1/8 | 1.3 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 1" | 9/16" | 0000000 | 00000 |
| 1/4 × 1/4 | 1.5 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 1" | 9/16" | 0000000 | 00000 |
| 3/8 × 3/8 | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/16" | 9/16" | 0000000 | 00000 |
| 1/2 × 1/2 | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 5/16" | 9/16" | 0000000 | 00000 |
316 Stainless Steel Body | |||||||||
NPT Female × NPT Female | |||||||||
| 1/8 × 1/8 | 0.3 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 13/16" | 19/32" | 00000000 | 000000 |
| 1/4 × 1/4 | 0.7 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 1" | 25/32" | 00000000 | 000000 |
| 3/8 × 3/8 | 1.5 | 2500 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/4" | 1 1/8" | 00000000 | 000000 |
| 1/2 × 1/2 | 3.5 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 1 3/4" | 13/16" | 0000000 | 000000 |
| 3/4 × 3/4 | 2.5 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 1 13/16" | 13/16" | 0000000 | 000000 |
BSPT Female × BSPT Female | |||||||||
| 1/4 × 1/4 | 0.7 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/4" | 3/4" | 0000000 | 000000 |
Panel-Mount On/Off Valves with Yor-Lok Fittings
Easily access the handle of these valves while protecting your line behind an instrument panel. They have threads and a hex nut below the handle for panel mounting. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. They’re compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.
Valves with a lockable handle can be fixed in place using a padlock (not included).
316 stainless steel valves are more corrosion resistant than brass valves.
Fluoroelastomer seals are highly compressible, so they conform to seal connections tightly, even when surfaces are uneven, misaligned, and dirty.
PTFE seals are the best choice for valves that are opened and closed often. The PTFE material forms a seal while remaining slippery, so they resist wearing down and failing with repeated use.
PFA seals withstand high pressures and temperature changes. The plastic of the seal is nonporous, so it won’t trap gases or liquids that would weaken them.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Straight with Lever Handle
Yor Lok × Yor Lok
Yor Lok × NPT Female
Yor Lok × NPT Male
- Valve Type: Ball
- For Use With: See Table
| For Tube OD | Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Panel Cutout Dia. | For Use With | Each | |
Brass Body—Fluoroelastomer Rubber Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | |||||||||||
| 1/8" | __ | 0.22 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 2 3/8" | 5/8" | Water, Oil, Air | 0000000 | 000000 |
| 1/4" | __ | 0.88 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 2 9/16" | 5/8" | Water, Oil, Air | 0000000 | 00000 |
| 3/8" | __ | 1.57 | 1000 psi @ 70° F | __ | -30° to 300° | 29 | 2 5/8" | 5/8" | Water, Oil, Air | 0000000 | 00000 |
| 1/2" | __ | 2.74 | 1000 psi @ 70° F | __ | -30° to 300° | 29 | 3 3/16" | 5/8" | Water, Oil, Air | 0000000 | 000000 |
Yor Lok × NPT Female | |||||||||||
| 1/4" | 1/4 | 0.88 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 1 3/4" | 9/16" | Water, Oil, Air | 00000000 | 00000 |
| 3/8" | 1/4 | 0.88 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 1 13/16" | 9/16" | Water, Oil, Air | 00000000 | 00000 |
Yor Lok × NPT Male | |||||||||||
| 1/4" | 1/4 | 0.88 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 1 15/16" | 9/16" | Water, Oil, Air | 00000000 | 00000 |
| 3/8" | 1/4 | 0.88 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 2" | 9/16" | Water, Oil, Air | 00000000 | 00000 |
Brass Body—PTFE Plastic Seal | |||||||||||
Yor Lok × Yor Lok | |||||||||||
| 1/8" | __ | 0.2 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 3 1/8" | 3/4" | Water, Oil, Air | 0000000 | 000000 |
| 1/4" | __ | 1.5 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 3 5/16" | 3/4" | Water, Oil, Air | 0000000 | 000000 |
| 3/8" | __ | 1.5 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 3 7/16" | 3/4" | Water, Oil, Air | 0000000 | 000000 |
| 1/2" | __ | 12 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 4 1/16" | 13/16" | Water, Oil, Air | 0000000 | 000000 |
| 3/4" | __ | 6.5 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 4 1/16" | 13/16" | Water, Oil, Air | 00000000 | 000000 |
316 Stainless Steel Body—PFA Plastic Seal | |||||||||||
Yor Lok × Yor Lok | |||||||||||
| 1/16" | __ | 0.03 | 1000 psi @ 300° F | 50 psi @ 300° F | -65° to 300° | Not Rated | 1 11/16" | 19/32" | Water, Oil, Air, Steam | 0000000 | 000000 |
| 1/8" | __ | 0.2 | 1000 psi @ 300° F | 50 psi @ 300° F | -65° to 300° | Not Rated | 2" | 19/32" | Water, Oil, Air, Steam | 0000000 | 000000 |
| 1/4" | __ | 0.44 | 1000 psi @ 300° F | 50 psi @ 300° F | -65° to 300° | Not Rated | 2 1/4" | 19/32" | Water, Oil, Air, Steam | 0000000 | 000000 |
| 3/8" | __ | 1.02 | 1000 psi @ 300° F | 50 psi @ 300° F | -65° to 300° | Not Rated | 2 5/8" | 25/32" | Water, Oil, Air, Steam | 0000000 | 000000 |
| 1/2" | __ | 10.7 | 1000 psi @ 300° F | 50 psi @ 300° F | -65° to 300° | Not Rated | 3 7/8" | 1 1/2" | Water, Oil, Air, Steam | 0000000 | 000000 |
316 Stainless Steel Body—PTFE Plastic Seal | |||||||||||
Yor Lok × Yor Lok | |||||||||||
| 1/16" | __ | 0.1 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 2 3/4" | 3/4" | Water, Oil, Air | 00000000 | 000000 |
| 1/8" | __ | 0.2 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 1/8" | 3/4" | Water, Oil, Air | 00000000 | 000000 |
| 1/4" | __ | 1.5 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 5/16" | 3/4" | Water, Oil, Air | 00000000 | 000000 |
| 3/8" | __ | 1.5 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 7/16" | 3/4" | Water, Oil, Air | 00000000 | 000000 |
| 1/2" | __ | 12 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 4 1/16" | 13/16" | Water, Oil, Air | 00000000 | 000000 |
| 3/4" | __ | 6.5 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 4 1/16" | 13/16" | Water, Oil, Air | 00000000 | 000000 |
| 3mm | __ | 0.2 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 1/16" | 3/4" | Water, Oil, Air | 00000000 | 000000 |
| 6mm | __ | 1.5 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 5/16" | 3/4" | Water, Oil, Air | 00000000 | 000000 |
Straight with Lockable Lever Handle
- Valve Type: Ball
- For Use With: Water, Oil, Air
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | For Max. Shackle Dia. | Panel Cutout Dia. | Each | |
316 Stainless Steel Body—PTFE Plastic Seal | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | |||||||||
| 1/4" | 1.5 | 6000 psi @ 125° F | -30° to 280° | 29 | 3 5/16" | 9/32" | 3/4" | 00000000 | 0000000 |
| 3/8" | 1.5 | 6000 psi @ 125° F | -30° to 280° | 29 | 3 7/16" | 9/32" | 3/4" | 00000000 | 000000 |
| 1/2" | 12 | 6000 psi @ 125° F | -30° to 280° | 29 | 4 1/16" | 9/32" | 13/16" | 00000000 | 000000 |
| 3/4" | 6.5 | 6000 psi @ 125° F | -30° to 280° | 29 | 4 1/16" | 9/32" | 13/16" | 00000000 | 000000 |
Elbow with Lever Handle
- Valve Type: Ball
- For Use With: Water, Oil, Air, Steam
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
316 Stainless Steel Body—PFA Plastic Seal | ||||||||
|---|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | ||||||||
| 1/4" | 0.34 | 2000 psi @ 300° F | 50 psi @ 300° F | -65° to 300° | 1 1/8" | 19/32" | 00000000 | 0000000 |
| 3/8" | 0.7 | 2000 psi @ 300° F | 50 psi @ 300° F | -65° to 300° | 1 5/16" | 25/32" | 00000000 | 000000 |
Panel-Mount Threaded On/Off Valves for Drinking Water
Female x Female
Female x Male
Male x Male
- Valve Type: Ball
- For Use With: Drinking Water
- Seal Material: EPDM Rubber
- Specifications Met: NSF/ANSI 61
Protect your drinking water line behind an instrument panel while keeping the handle handy. These valves have a nut that threads onto the stem to mount the handle onto the panel. They meet NSF/ANSI 61, a strict standard for drinking water systems.
PVC valves are the most common for drinking water systems.
Polypropylene valves are more flexible than PVC valves, so they’re better at handling movement and vibration without cracking.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Panel Cutout Dia. | Each | |
Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
| 1/8 | 2.4 | 125 psi @ 140° F | 40° to 140° | 1 7/8" | 3/4" | 0000000 | 000000 |
| 1/4 | 3 | 125 psi @ 140° F | 40° to 140° | 1 7/8" | 3/4" | 0000000 | 00000 |
NPT Female × NPT Male | |||||||
| 1/8 | 1.8 | 125 psi @ 140° F | 40° to 140° | 2 1/8" | 3/4" | 0000000 | 00000 |
| 1/4 | 2.5 | 125 psi @ 140° F | 40° to 140° | 2 3/16" | 3/4" | 0000000 | 00000 |
NPT Male × NPT Male | |||||||
| 1/8 | 1.4 | 125 psi @ 140° F | 40° to 140° | 2 5/16" | 3/4" | 0000000 | 00000 |
| 1/4 | 2.2 | 125 psi @ 140° F | 40° to 140° | 2 1/2" | 3/4" | 0000000 | 00000 |
White Polypropylene Plastic Body | |||||||
NPT Female × NPT Female | |||||||
| 1/8 | 2.4 | 125 psi @ 140° F | 40° to 140° | 1 7/8" | 3/4" | 0000000 | 00000 |
| 1/4 | 3 | 125 psi @ 140° F | 40° to 140° | 1 7/8" | 3/4" | 0000000 | 00000 |
NPT Female × NPT Male | |||||||
| 1/8 | 1.8 | 125 psi @ 140° F | 40° to 140° | 2 1/8" | 3/4" | 0000000 | 00000 |
| 1/4 | 2.5 | 125 psi @ 140° F | 40° to 140° | 2 3/16" | 3/4" | 0000000 | 00000 |
NPT Male × NPT Male | |||||||
| 1/8 | 1.4 | 125 psi @ 140° F | 40° to 140° | 2 5/16" | 3/4" | 0000000 | 00000 |
| 1/4 | 2.5 | 125 psi @ 140° F | 40° to 140° | 2 1/2" | 3/4" | 0000000 | 00000 |
Panel-Mount Threaded Diverting Valves
For installation in instrument panels, these valves have threads and a hex nut below the handle. They divert flow between ports. Turn the handle to direct the flow.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Valves with a 316 stainless steel body are more corrosion resistant than those with a brass body.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
L-Pattern Flow
Female Bottom × Female Side × Female Side
Female Bottom × Female
Side × Female
Side × Female Side
Side × Female
Side × Female Side
Female Bottom × Female
Side × Female Side ×
Female Side × Female Side
Side × Female Side ×
Female Side × Female Side
Female Side × Female Side × Female Side
Male Bottom × Male Side × Male Side
- Valve Type: Ball
- Seal Material: See table
- For Use With: See Table
Handle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Shut-Off | Style | Color | Port Type | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | Panel Cutout Dia. | Seal Material | End-to-End Lg. | For Use With | Each | |
316 Stainless Steel Body | ||||||||||||||
NPT Female Bottom × NPT Female Side × NPT Female Side | ||||||||||||||
| 1/8 | No | T-Handle | Black | Standard | 0.3 | 1500 psi @ 70° F | -65° to 300° | 29 | 5/8" | PTFE Plastic | 1 5/8" | Air, Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon | 0000000 | 0000000 |
| 1/4 | No | T-Handle | Black | Standard | 0.75 | 1500 psi @ 70° F | -65° to 300° | 29 | 13/16" | PTFE Plastic | 2 1/16" | Air, Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon | 0000000 | 000000 |
Brass Body | ||||||||||||||
NPT Female Bottom × NPT Female Side × NPT Female Side | ||||||||||||||
| 1/8 | Yes | Lever | Black | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 1 13/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 1/8 | Yes | Lever | Black | Full | 2.4 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 1/2" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 00000000 | 00000 |
| 1/8 | Yes | T-Handle | Blue | Full | 2.4 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 1/2" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 1/4 | Yes | Lever | Black | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 1 13/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 1/4 | Yes | Lever | Black | Full | 3.1 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 3/4" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 00000000 | 00000 |
| 1/4 | Yes | T-Handle | Blue | Full | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 3/4" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 1/4 | Yes | T-Handle | Red | Full | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 3/4" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 3/8 | Yes | Lever | Black | Full | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 15/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 00000000 | 00000 |
| 3/8 | Yes | Lever | Black | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/4" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 3/8 | Yes | T-Handle | Blue | Full | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 15/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 3/8 | Yes | T-Handle | Red | Full | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 1 15/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 1/2 | Yes | Lever | Black | Standard | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 2 3/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 00000000 | 00000 |
| 1/2 | Yes | Lever | Black | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 3/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/2 | Yes | T-Handle | Blue | Standard | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 2 1/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 1/2 | Yes | T-Handle | Red | Standard | 2.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 13/16" | Buna-N Rubber | 2 1/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
NPT Female Bottom × NPT Female Side × NPT Female Side × NPT Female Side | ||||||||||||||
| 1/8 | Yes | T-Handle | Black | Full | 0.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 1 11/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/8 | Yes | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 7/8" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/8 | Yes | T-Handle | Blue | Full | Not Rated | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 1 11/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/4 | Yes | T-Handle | Black | Standard | Not Rated | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 2 1/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/4 | Yes | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 7/8" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/4 | Yes | T-Handle | Blue | Standard | 0.7 | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 2 1/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 3/8 | Yes | T-Handle | Black | Standard | 3.53 | 1500 psi @ 70° F | -30° to 300° | 29 | 7/8" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 3/8 | Yes | T-Handle | Blue | Standard | Not Rated | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 2 1/2" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/2 | Yes | T-Handle | Black | Standard | 3.53 | 1500 psi @ 70° F | -30° to 300° | 29 | 7/8" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/2 | Yes | T-Handle | Blue | Full | 3.34 | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 3 1/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
NPT Female Bottom × NPT Female Side × NPT Female Side × NPT Female Side × NPT Female Side | ||||||||||||||
| 1/8 | No | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 7/8" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/4 | No | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 7/8" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
NPT Female Side × NPT Female Side × NPT Female Side | ||||||||||||||
| 1/8 | No | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/4 | No | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 3/8 | No | T-Handle | Black | Standard | 3.53 | 500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/2 | No | T-Handle | Black | Standard | 3.53 | 500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
NPT Male Bottom × NPT Male Side × NPT Male Side | ||||||||||||||
| 1/8 | Yes | Lever | Black | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 1 15/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 1/4 | Yes | Lever | Black | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 00000 |
| 3/8 | Yes | Lever | Black | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 11/16" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
| 1/2 | Yes | Lever | Black | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon | 0000000 | 000000 |
Double L-Pattern Flow
Female Side × Female Side × Female Side × Female Side
- Valve Type: Ball
- Seal Material: See table
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
Handle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Shut-Off | Style | Color | Port Type | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | Panel Cutout Dia. | Seal Material | End-to-End Lg. | Each | |
Brass Body | |||||||||||||
NPT Female Side × NPT Female Side × NPT Female Side × NPT Female Side | |||||||||||||
| 1/8 | No | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/16" | 0000000 | 0000000 |
| 1/4 | No | T-Handle | Black | Standard | Not Rated | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 2 1/16" | 0000000 | 000000 |
| 1/4 | No | T-Handle | Black | Standard | 0.64 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/16" | 0000000 | 000000 |
| 3/8 | No | T-Handle | Black | Standard | 0.8 | 500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | 0000000 | 000000 |
| 3/8 | No | T-Handle | Blue | Standard | Not Rated | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 2 1/2" | 0000000 | 000000 |
| 1/2 | No | T-Handle | Black | Standard | 0.8 | 500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | 0000000 | 000000 |
| 1/2 | No | T-Handle | Blue | Full | 3.34 | 500 psi @ 70° F | -20° to 180° | Not Rated | 3/4" | Buna-N Rubber | 3 1/4" | 0000000 | 000000 |
Diverting Valves with Yor-Lok Fittings
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: See table
For extra gripping power and a strong seal, these valves have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. Valves divert flow between ports. Turn the handle to direct flow from the bottom-port inlet to either side-port outlet. Valves are standard port, so they slightly restrict flow. All have threads and a hex nut below the handle for panel mounting.
Valves with flow shut-off can stop flow completely in addition to diverting flow between outlet ports.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| For Tube OD | Flow Pattern | Flow Shut-Off | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | Seal Material | End-to-End Lg. | Each | |
Brass Body | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok × Yor Lok | ||||||||||
| 1/8" | L-Pattern | Yes | 0.22 | 1500 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 2 3/8" | 0000000 | 0000000 |
| 1/4" | L-Pattern | Yes | 0.88 | 1500 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 2 9/16" | 0000000 | 00000 |
| 3/8" | L-Pattern | Yes | 1.57 | 1000 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | 0000000 | 00000 |
| 1/2" | L-Pattern | Yes | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 3 1/8" | 0000000 | 000000 |