Parker Compressed Air Lubricators

Filter by

Manufacturer

Inlet Pipe Size

Outlet Pipe Size

Component

Filter/Regulator/Lubricator

Manufacturer Series

Inlet Thread Type

Bowl Type

Opaque with Sight Glass

Outlet Thread Type

Series Number

Maximum Pressure

Drain Type

Lubricant Capacity

Pipe Size

Maximum Flow Rate @ Pressure

Export Control Classification Number (ECCN)

Bowl Material

Maximum Pressure Regulation

Material

Overall Height

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

Compliant with Exemptions

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Component Configuration

For Removing

Housing Material

110 Products

Parker Modular Compressed Air Lubricators

Add lubrication to your air supply to keep air-powered tools and equipment running smoothly. These lubricators connect to other Parker units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. You can see inside the bowl to check the oil level for refilling. Adjust the amount of lubricant in the air based on your equipment's performance. If your machine is running loudly or showing signs of wear, increase the amount; if you notice oil building up, decrease it. Install these lubricators in your air line after filters and regulators.

P31 Series—NPT Female Inlet × NPT Female Outlet

Clear Bowl

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

	Lubricators											Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each
Polycarbonate Bowl with Nylon Bowl Guard—Clear



		P31LB	1/4	1/4	59 scfm @ 100 psi	150	125	0.6	6 1/8"	1 5/8"	8794N11	000000	8486T111	00000

Replacements for Lubricators

		Each
Sight Dome	3106N12	000000
Lubricator Bowl	3105N15	00000

P32 Series—NPT Female Inlet × NPT Female Outlet

Clear Bowl

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

	Lubricators											Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each
Polycarbonate Bowl with Nylon Bowl Guard—Clear



		P32LB	1/4	1/4	38 scfm @ 100 psi	150	125	4.09	8 5/8"	2 3/8"	8794N12	000000	8486T271	000000


		P32LB	3/8	3/8	70 scfm @ 100 psi	150	125	4.09	8 5/8"	2 3/8"	8794N13	00000	8486T271	00000
		P32LB	1/2	1/2	110 scfm @ 100 psi	150	125	4.09	8 5/8"	2 3/8"	8794N14	00000	8486T271	00000

Replacements for Lubricators

		Each
Sight Dome	3106N12	000000
Lubricator Bowl	3105N16	00000

P33 Series—NPT Female Inlet × NPT Female Outlet

Clear Bowl

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

	Lubricators											Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each
Polycarbonate Bowl with Nylon Bowl Guard—Clear



		P33LA	1/2	1/2	110 scfm @ 100 psi	150	125	6.1	9 1/4"	3"	8794N15	000000	8486T271	000000


		P33LA	3/4	3/4	150 scfm @ 100 psi	150	125	6.1	9 1/4"	3"	8794N16	00000	8486T271	00000

Replacements for Lubricators

		Each
Sight Dome	3106N12	000000
Lubricator Bowl	3105N17	00000

P3Y Series—NPT Female Inlet × NPT Female Outlet

Opaque Bowl

with Sight Glass

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

	Lubricators											Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each
Polypropylene Bowl—Opaque with Sight Glass



		P3YLA	1	1	450 scfm @ 100 psi	254	140	16.9	9 3/4"	3 1/2"	3110N11	0000000	8486T27	000000

Replacement Compressed Air Lubricator Bowls

		Each
Lubricator Bowl	3105N18	0000000

06 Series—NPT Female Inlet × NPT Female Outlet

Clear Bowl

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

	Lubricators											Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each
Polycarbonate Bowl with Steel Bowl Guard—Clear



		06L	1/4	1/4	40 scfm @ 100 psi	150	125	2.9	7 7/8"	2 7/8"	8452T21	0000000	8486T1	000000


		06L	3/8	3/8	85 scfm @ 100 psi	150	125	2.9	7 7/8"	2 7/8"	8452T11	000000	8486T1	00000


		Polycarbonate Bowl with Nylon Bowl Guard—Clear



				06L	1/2	1/2	90 scfm @ 100 psi	150	125	2.9	7 7/8"	2 7/8"	8794N17	000000	8486T1	00000

Replacements for Lubricators

		Each
Sight Dome	3106N11	000000
Lubricator Bowl	3105N11	00000

07 Series—NPT Female Inlet × NPT Female Outlet

Clear Bowl

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

	Lubricators											Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each
Polycarbonate Bowl with Steel Bowl Guard—Clear



		07L	1/2	1/2	140 scfm @ 100 psi	150	125	6	9 1/8"	3 1/4"	8452T12	0000000	8486T2	000000


		07L	3/4	3/4	140 scfm @ 100 psi	150	125	6	9 1/8"	3 1/4"	8452T13	000000	8486T2	00000

Replacements for Lubricators

		Each
Sight Dome	3106N11	000000
Lubricator Bowl	3105N12	00000

Parker Compressed Air Lubricator Sight Domes

Replace a cracked or lost sight dome on your Parker compressed air lubricator. These sight domes let you keep an eye on how much lubricant is entering your air line. All come with an O-ring to ensure a tight seal.

	Material	Includes		Each
For Series No. P31, P32, and P33



	P31LB, P32LB, P33LA	Polycarbonate	O-Ring	3106N12	000000


	For Series No. 06, 07, 15, 16, 17, and P3N



			06L, 07L, 15L, 16L, 17L, P3N	Polycarbonate	O-Ring	3106N11	00000

Parker Modular Compressed Air Filter/Regulator/Lubricators (FRLs)

Made up of a Parker filter, regulator, and lubricator, these FRLs provide clean, lubricated air at your required pressure. They connect to other Parker units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Series No. P31—NPT Female Inlet and Outlet


Inline Components	Stacked Components

Safety Lockout Valve Inline Components	Safety Lockout Valve Stacked Components

Safety Lockout Valve—FRLs with a safety lockout valve can be locked in the shut-off position to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Automatic Drain—Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

Brackets—Mounting brackets (sold separately) allow you to attach these FRLs to a wall or equipment.

Tamper-Resistant Padlockable Covers—Tamper-resistant padlockable covers (sold separately) clamp over the regulator knob to prevent unwanted pressure changes.

	Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps		Brackets		Replacement Elements		Tamper-Resistant Padlockable Covers
		Pipe Size								Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each		Each		Each		Each
FRLs







				Inline with Clear Polycarbonate Bowl and Automatic Drain

				P31	1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	5 15/16"	4 3/4"	8421T12	0000000	3102N31	000000	8486T111	00000	6746K82	00000	3100N111	00000	8367N11	000000




						Inline with Clear Polycarbonate Bowl and Manual Drain

						P31	1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	6 5/16"	4 3/4"	8421T14	000000	3102N35	00000	8486T111	0000	6746K82	0000	3100N111	0000	8367N11	00000




								Stacked with Clear Polycarbonate Bowl and Automatic Drain

								P31	1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	6 1/4"	3 1/8"	8421T16	000000	3102N31	00000	8486T111	0000	6746K82	0000	3100N111	0000	8367N11	00000




										Stacked with Clear Polycarbonate Bowl and Manual Drain

										P31	1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	6 9/16"	3 1/8"	8421T18	000000	3102N35	00000	8486T111	0000	6746K82	0000	3100N111	0000	8367N11	00000


										FRLs with Safety Lockout Valve







														Inline with Clear Polycarbonate Bowl and Automatic Drain

														P31	1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	5 15/16"	6 3/8"	8421T13	000000	3102N31	00000	8486T111	0000	6746K82	0000	3100N111	0000	8367N11	00000




																Inline with Clear Polycarbonate Bowl and Manual Drain

																P31	1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	6 5/16"	6 3/8"	8421T15	000000	3102N35	00000	8486T111	0000	6746K82	0000	3100N111	0000	8367N11	00000




																		Stacked with Clear Polycarbonate Bowl and Automatic Drain

																		P31	1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	6 1/4"	4 13/16"	8421T17	000000	3102N31	00000	8486T111	0000	6746K82	0000	3100N111	0000	8367N11	00000




																				Stacked with Clear Polycarbonate Bowl and Manual Drain

P31																				1/4	1/4	55 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	0.6	6 9/16"	4 13/16"	8421T19	000000	3102N35	00000	8486T111	0000	6746K82	0000	3100N111	0000	8367N11	00000

Series No. P32—NPT Female Inlet and Outlet


Inline Components	Stacked Components

Safety Lockout Valve Inline Components	Safety Lockout Valve Stacked Components

Safety Lockout Valve—FRLs with a safety lockout valve can be locked in the shut-off position to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Automatic Drain—Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

Brackets—Mounting brackets (sold separately) allow you to attach these FRLs to a wall or equipment.

Tamper-Resistant Padlockable Covers—Tamper-resistant padlockable covers (sold separately) clamp over the regulator knob to prevent unwanted pressure changes.

	Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps		Brackets		Replacement Elements		Tamper-Resistant Padlockable Covers
		Pipe Size								Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each		Each		Each		Each
FRLs







				Inline with Clear Polycarbonate Bowl and Automatic Drain

				P32	1/4	1/4	42 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 11/16"	7 13/16"	8421T21	0000000	3102N32	000000	8486T271	000000	3109N231	00000	3100N112	000000	8367N12	000000


				P32	3/8	3/8	68 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 11/16"	7 13/16"	8421T22	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
				P32	1/2	1/2	85 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 11/16"	7 13/16"	8421T23	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000




						Inline with Clear Polycarbonate Bowl and Manual Drain

						P32	1/4	1/4	42 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 15/16"	7 13/16"	8421T27	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


						P32	3/8	3/8	68 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 15/16"	7 13/16"	8421T28	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
						P32	1/2	1/2	85 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 15/16"	7 13/16"	8421T29	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000




								Stacked with Clear Polycarbonate Bowl and Automatic Drain

								P32	1/4	1/4	45 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 1/8"	5 1/8"	8421T34	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


								P32	3/8	3/8	70 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 1/8"	5 1/8"	8421T35	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
								P32	1/2	1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 1/8"	5 1/8"	8421T36	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000




										Stacked with Clear Polycarbonate Bowl and Manual Drain

										P32	1/4	1/4	45 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 5/16"	5 1/8"	8421T41	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


										P32	3/8	3/8	70 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 5/16"	5 1/8"	8421T42	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
										P32	1/2	1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 5/16"	5 1/8"	8421T43	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


										FRLs with Safety Lockout Valve







														Inline with Clear Polycarbonate Bowl and Automatic Drain

														P32	1/4	1/4	42 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 11/16"	10 9/16"	8421T24	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


														P32	3/8	3/8	68 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 11/16"	10 9/16"	8421T25	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
														P32	1/2	1/2	85 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 11/16"	10 9/16"	8421T26	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000




														Inline with Clear Polycarbonate Bowl and Manual Drain

		P32	1/4											1/4	42 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 15/16"	10 9/16"	8421T31	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


		P32	3/8											3/8	68 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 15/16"	10 9/16"	8421T32	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
		P32	1/2											1/2	85 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	8 15/16"	10 9/16"	8421T33	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000




														Stacked with Clear Polycarbonate Bowl and Automatic Drain

				P32	1/4									1/4	45 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 1/8"	7 13/16"	8421T37	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


				P32	3/8									3/8	70 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 1/8"	7 13/16"	8421T38	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
				P32	1/2									1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 1/8"	7 13/16"	8421T39	000000	3102N32	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000




														Stacked with Clear Polycarbonate Bowl and Manual Drain

						P32	1/4							1/4	45 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 5/16"	7 13/16"	8421T44	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000


						P32	3/8							3/8	70 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 5/16"	7 13/16"	8421T45	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000
						P32	1/2							1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	4	10 5/16"	7 13/16"	8421T46	000000	3102N36	00000	8486T271	00000	3109N231	0000	3100N112	00000	8367N12	00000

Series No. P33—NPT Female Inlet and Outlet


Inline Components	Stacked Components

Safety Lockout Valve Inline Components	Safety Lockout Valve Stacked Components

Safety Lockout Valve—FRLs with a safety lockout valve can be locked in the shut-off position to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Automatic Drain—Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

Brackets—Mounting brackets (sold separately) allow you to attach these FRLs to a wall or equipment.

Tamper-Resistant Padlockable Covers—Tamper-resistant padlockable covers (sold separately) clamp over the regulator knob to prevent unwanted pressure changes.

	Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps		Brackets		Replacement Elements		Tamper-Resistant Padlockable Covers
		Pipe Size								Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each		Each		Each		Each
FRLs







				Inline with Clear Polycarbonate Bowl and Automatic Drain

				P33	1/2	1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	9 3/8"	9 3/8"	8421T47	0000000	3102N33	000000	8486T271	000000	3109N17	000000	3100N113	000000	8367N12	000000


				P33	3/4	3/4	110 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	9 3/8"	9 3/8"	8421T48	000000	3102N33	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000




						Inline with Clear Polycarbonate Bowl and Manual Drain

						P33	1/2	1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	9 5/8"	9 3/8"	8421T52	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


						P33	3/4	3/4	110 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	9 5/8"	9 3/8"	8421T53	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000




								Stacked with Clear Polycarbonate Bowl and Automatic Drain

								P33	1/2	1/2	110 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	11 1/4"	6 1/8"	8421T54	000000	3102N33	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


								P33	3/4	3/4	150 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	11 1/4"	6 1/8"	8421T55	000000	3102N33	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000




										Stacked with Clear Polycarbonate Bowl and Manual Drain

										P33	1/2	1/2	110 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	11 1/2"	6 1/8"	8421T58	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


										P33	3/4	3/4	150 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	11 1/2"	6 1/8"	8421T59	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


										FRLs with Safety Lockout Valve







														Inline with Clear Polycarbonate Bowl and Automatic Drain

														P33	1/2	1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	9 9/16"	12 9/16"	8421T49	000000	3102N33	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


														P33	3/4	3/4	110 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	9 9/16"	12 9/16"	8421T51	000000	3102N33	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000




																Inline with Clear Polycarbonate Bowl and Manual Drain

P33	1/2															1/2	90 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	12"	15"	8421T8	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


P33	3/4															3/4	110 scfm @ 90 psi	250	5	5 to 125	Mounting Bracket	6	9 3/4"	15 1/4"	8421T7	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000




		Stacked with Clear Polycarbonate Bowl and Automatic Drain

		P33	1/2													1/2	110 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	11 1/4"	9 5/16"	8421T56	000000	3102N33	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


		P33	3/4													3/4	150 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	11 1/4"	9 5/16"	8421T57	000000	3102N33	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000




				Stacked with Clear Polycarbonate Bowl and Manual Drain

				P33	1/2											1/2	110 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	12"	11 1/2"	8421T11	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000


				P33	3/4											3/4	150 scfm @ 90 psi	150	5	5 to 125	Mounting Bracket	6	12"	11 1/2"	8421T9	000000	3102N37	00000	8486T271	00000	3109N17	00000	3100N113	00000	8367N12	00000

Series No. P3Y—NPT Female Inlet and Outlet


Inline Components	Stacked Components

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Automatic Drain—Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Semi-Automatic Drain—Bowls with a semi-automatic drain release their condensate whenever your system is depressurized. You can also empty the drain manually.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

	Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
		Pipe Size								Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each
FRLs







				Inline with Clear Polypropylene Bowl and Automatic Drain

				P3Y	1	1	170 scfm @ 90 psi	250	5	7 to 174	Mounting Bracket	16.9	13 9/16"	10 5/8"	8421T61	0000000	3102N34	0000000	8486T27	000000




						Inline with Clear Polypropylene Bowl and Manual, Semi-Automatic Drain

						P3Y	1	1	170 scfm @ 90 psi	250	5	7 to 174	Mounting Bracket	16.9	13 9/16"	10 5/8"	8421T62	000000	3102N41	00000	8486T27	00000




								Stacked with Clear Polypropylene Bowl and Automatic Drain

								P3Y	1	1	340 scfm @ 90 psi	250	5	7 to 174	Mounting Bracket	16.9	13 9/16"	7 1/16"	8421T63	000000	3102N34	000000	8486T27	00000




										Stacked with Clear Polypropylene Bowl and Manual, Semi-Automatic Drain

										P3Y	1	1	340 scfm @ 90 psi	250	5	7 to 174	Mounting Bracket	16.9	13 9/16"	7 1/16"	8421T64	000000	3102N41	00000	8486T27	00000

Replacements for Compressed Air Filter/Regulator/Lubricators


Replacement Filter Element	3100N11	Each	000000
Replacement Mounting Bracket	3111N13	Pkg. of 2	00000

Parker Compressed Air Lubricator Bowls


Polycarbonate Bowl—Clear	Polypropylene Bowl—Opaque with Sight Glass

Replace a damaged bowl, or change the bowl material on your Parker modular compressed air lubricator. Bowls come with an O-ring to ensure a tight seal. Check the manufacturer series on your lubricator to ensure compatibility.

	Drain Type	Includes		Each
Polycarbonate Bowl—Clear



	P31LB	Without Drain	O-Ring	3105N15	000000


	P32LB	Without Drain	O-Ring	3105N16	00000
	P33LA	Without Drain	O-Ring	3105N17	00000
	06L, 16L	Without Drain	O-Ring	3105N11	00000
	07L, 17L	Without Drain	O-Ring	3105N12	00000


	Polypropylene Bowl—Opaque with Sight Glass



			P3YLA	Without Drain	O-Ring	3105N18	000000

Corrosion-Resistant Compressed Air Lubricators

316

Stainless

Steel

Built for harsh environments, these lubricators keep working in areas where standard lubricators would corrode and break down. They add lubrication to your air supply to extend the service life of air-powered tools and equipment. Adjust the amount of lubricant in the air based on your equipment's performance. If your machine is running loudly or showing signs of wear, increase the amount; if you notice oil building up, decrease it. Install these lubricators in your air line after filters and regulators.

316 Stainless Steel Housing—316 stainless steel lubricators hold up to harsh chemicals and frequent washdowns.

	Pipe Size						Overall
	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Temp. Range, ° F	Lubricant Cap., fl. oz.	Ht.	Wd.	Specs. Met		Each
NPT Female Inlet × NPT Female Outlet







				316 Stainless Steel Housing—Opaque 316 Stainless Steel Bowl

				1/2	1/2	99 scfm @ 90 psi	300	0 to 150	4	6 3/4"	2 1/2"	NACE MR0175/ISO 15156	8802N15	0000000

Chemical-Resistant Compressed Air Filter/Regulator/Lubricators (FRLs)

Built with a brass housing and a polyurethane bowl, these FRLs hold up to cleaning fluid, synthetic compressor oil, and other harsh chemicals. They combine a filter, regulator, and lubricator to deliver clean, lubricated air at the pressure you need. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

NPT Female Inlet and Outlet


Inline Components	Stacked Components

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Brackets—Mounting brackets (sold separately) allow you to attach these FRLs to a wall or equipment.

Compressed Air Filter/Regulator/Lubricators												Brackets		Replacement Elements
	Pipe Size							Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polyurethane Rubber Bowl and Manual Drain

			C547	1/8	1/8	12 scfm @ 100 psi	150	20	0 to 125	1.5	6 1/8"	5 1/8"	1426K41	0000000	6763K21	000000	6760K15	000000


			C547	1/4	1/4	12 scfm @ 100 psi	150	20	0 to 125	1.5	6 1/8"	5 1/8"	1426K42	000000	6763K21	00000	6760K15	00000




					Stacked with Clear Polyurethane Rubber Bowl and Manual Drain

					C547	1/4	1/4	12 scfm @ 100 psi	150	20	0 to 125	1.5	5 7/8"	3 1/2"	1471K42	000000	6763K21	00000	6760K15	00000

Manifolds for Parker Modular Compressed Air Filter/Regulator/Lubricators (FRLs)


For P31 Series	For P32 Series	For P33 Series	For P3Y Series

Distribute compressed air to multiple locations from a single source. These manifolds connect with Parker modular components that have the same manufacturer series.

Filter/Regulator/Lubricator Joiner Clamps—Use joiner clamps to connect manifolds to another Parker modular unit with the same series number.

	Compressed Air Filter/Regulator/Lubricator Manifolds												Filter/Regulator/Lubricator Joiner Clamps
	For Mfr. Series	Total No. of Outlets	Inlet Pipe Size (No. of)	Outlet Pipe Size (No. of)	Max. Pressure, psi	Max. Temp., ° F	Lg.	Wd.	Ht.	Material		Each		Each
NPT Inlets and Outlets



		P31	3	1/4 (1)	1/4 (3)	300	150	1 5/8"	1 5/8"	1 5/8"	Aluminum	8561N22	000000	8486T111	00000


		P32	3	1/2 (1)	1/2 (2), 1/4 (1)	300	150	2 3/8"	1 7/8"	1 7/8"	Aluminum	8561N23	00000	8486T271	00000
		P33	3	3/4 (1)	3/4 (1), 1/2 (1), 1/4 (1)	300	150	2 7/8"	2 5/8"	1 7/8"	Aluminum	8561N24	00000	8486T271	00000
		P3Y	5	1 (1)	1 (1), 3/4 (1), 1/4 (2), 1/8 (1)	250	140	3 1/8"	2 5/8"	2 5/8"	Aluminum	8561N25	00000	8486T27	00000

Slow-Start Air-Exhaust Valves for Parker Modular Compressed Air Filter/Regulator/Lubricators (FRLs)

Image of Product. Front orientation. Air-Exhaust Valves.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up. When the solenoid is shut off, the valve cuts air to your equipment by exhausting downstream pressure. To ensure compatibility, match the valve series number to the series number on your Parker components.

Joiner Clamps—Connect valves to other Parker modular components with the same series number. Clamps for series no. P31T and P32T valves come with mounting brackets.

	Valves																Joiner Clamps
		Pipe Size			Valve					Overall			120V AC		24V DC
	Mfr. Series	Inlet	Outlet	Exhaust	Type	Position	Max. Flow Rate @ Pressure	Max. Pressure, psi	Temp. Range, ° F	Wd.	Ht.	Dp.		Each		Each		Each
NPT Female Inlet, Outlet, and Exhaust







				P31 Series

				P31T	1/4	1/4	1/4	Poppet	Fail Closed	36 scfm @ 91 psi	150	15 to 120	2 3/4"	5 3/8"	1 9/16"	6567N11	0000000	6567N12	0000000	8486T111	00000




						P32 Series

						P32T	1/2	1/2	1/2	Poppet	Fail Closed	108 scfm @ 91 psi	150	15 to 120	3"	6 7/8"	2 1/4"	6567N21	000000	6567N22	000000	8486T271	00000




								P3Y Series

								P3YT	1	1	1	Poppet	Fail Closed	424 scfm @ 91 psi	232	15 to 140	3 9/16"	7 1/2"	4 1/8"	———	0	6567N31	000000	8486T27	00000