Clear All
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
Pump Type Pump Type |
|---|
|
Power Source Power Source |
|---|
|
Wire Connection Type Wire Connection Type |
|---|
 | Wire Leads |
Phase Phase |
|---|
|
Pump Style Pump Style |
|---|
|
Discharge Pipe Size Discharge Pipe Size |
|---|
Duty Cycle Duty Cycle |
|---|
|
Thermal Protection Thermal Protection |
|---|
|
Pump Activation Type Pump Activation Type |
|---|
|
Cord Length Cord Length |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
| Hardwire |
Frequency Frequency |
|---|
|
Discharge Thread Type Discharge Thread Type |
|---|
|
Maximum Feet of Head Maximum Feet of Head |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
How to Prime Your Pump
More
How to Determine Feet of Head
More
About Sump, Water-Removal, Condensate, and Submersible Pumps
More
Submersible Pumps for Chemicals
A
B
These pumps circulate solvent-based parts-washing solutions. Submerge in solutions that are UL classified as PJQU (flash point no lower than 100° F). Pumps must be wired to a plug (not included) to activate. Do not run dry. Not for use in heated parts washer applications.
Max. Flow Rate, gpm | Discharge | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 1 Ft. of Head | @ 3 Ft. of Head | @ 5 Ft. of Head | @ 7 Ft. of Head | Max. Ft. of Head, ft. | Temp. Range, °F | Horsepower | Current, A | Intake Inlet Connection Type | Pipe Size | Thread Type | Gender | Ht. | Wd. | Dp. | Each | ||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||
Hardwire | |||||||||||||||||
| A | 5 | 4.3 | 3.4 | 2.5 | 11.8 | 35° to 120° | 1/40 hp | 1.7 | Screened | 1/4 | NPT | Male | 4 3/4" | 3 1/2" | 5 1/2" | 0000000 | 0000000 |
| B | 3.4 | 2.8 | 2 | 0.3 | 7.4 | 35° to 120° | 1/150 hp | 1.1 | Screened | 1/4 | NPT | Male | 4 1/4" | 4 5/8" | 4 1/8" | 0000000 | 000000 |
120V AC, Single Phase—Without Thermal Overload Protection | |||||||||||||||||
Hardwire | |||||||||||||||||
| A | 2.8 | 2.3 | 1.7 | __ | 7 | 35° to 120° | 1/125 hp | 0.6 | Screened | 1/4 | NPT | Male | 3 5/8" | 2 3/4" | 3 1/4" | 0000000 | 000000 |
240V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||
Hardwire | |||||||||||||||||
| B | 3.4 | 2.8 | 2 | 0.3 | 7.4 | 35° to 120° | 1/150 hp | 0.6 | Screened | 1/4 | NPT | Male | 4 1/4" | 4 5/8" | 4 1/8" | 0000000 | 000000 |