Use these unshielded cords where signal interference is not a concern.

The M12 threaded connectors on these cords are more vibration resistant than RJ45 connectors.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

Send high-speed data between sensors, switches, or I/O modules with an M8 connection and programmable logic controllers (PLCs) and computers with a traditional RJ45 connection.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Connect computers, monitors, printers, and other devices with DB connections.

Display video from one source on two different monitors.

Connect audio to a single speaker, or extend the distance between stereo audio devices.

Pinch the sides on the plugs of these cords to insert them; they lock into a socket to prevent the cord from detaching.

Play audio from one source on two different speakers.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

Securely connect equipment in data or signal applications. These cords have A- or B-coded plugs to meet the needs of your device.

Commonly used for movie, stage, and interior building lighting, these cords connect to equipment with five-pin XLR connections.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

Step on or roll carts and platform trucks over these M12 cords without crushing them.

Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

These cords have an M8 connector on one end and an M12 connector on the other.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

The shielding blocks signal interference from nearby equipment and devices.

Power multiple devices from one power source.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

Plug these cords into fans that have quick-disconnect terminals.

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired.

Connect batteries to each other or to electrical systems.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Keep personnel safe from electric shock with these cords.

Designed for indoor applications, these cords are often used to power appliances.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

The insulation on these cords resists water, so they can be used outdoors.

A locking lever on the female socket prevents your device from disconnecting.

Give the connectors on these cords a quarter turn to lock in place.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Add grounding or surge suppression protection.

Use foreign devices in American outlets and American devices in foreign outlets.

Mount these adapters in a panel cutout.

Join two Ethernet cords—these adapters have an RJ45 female connection on both ends.

Alter DVI, DisplayPort, and HDMI connections.

Connect two fiber-optic cords that have the same gender and fiber-optic connection type.

Convert one HDMI size or style to another.

Mount these adapters in a panel cutout.

Join coaxial cords even if they are a different style or the same gender.

Adapt connections to attach cords to a computer.

Extend an audio connection by plugging a cord into each end of these adapters.

Extend the reach of USB devices.

These panel-mount adapters have a female USB connection on both ends to join two USB cables.

Use these connectors and cords to make Ethernet connections in wet location environments.

Protect connections in washdown environments while maintaining access—these RJ45 plugs and adapters latch together securely, yet quickly detach.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Send higher current than M12 connectors to automated systems, motors, and pumps in environments where washdowns are common.

Modify your M12 or mini connection to match cords and I/O modules in your system.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Visually confirm your connector is working properly. A green light means your connector has power, while yellow means it has signal.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

Minimize signal loss between low-current devices with M8 connections.

Visually check that your low-current devices with M8 connections are powered up and sending and receiving signals. These connectors illuminate green if they have power and yellow if they have signal.

Connect different pole configurations to join sensors, switches, and other devices to cords, distribution blocks, and I/O modules.

Reduce the number of cords needed to send and receive signals where space is tight.

Power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Power hydraulic and air-powered valves, motors, pumps, and pressure switches.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Meet international standards IEC 309-1 and 309-2.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

Hook up electrical testing equipment and create test circuits.

Pairs of red and black test leads are ready to connect to a multimeter or other electrical test equipment.

Perform electrical tests with a set of red and black test leads and interchangeable tips.

Connect to Fluke multimeters with a set of red and black test leads.

Extend the distance between your multimeter and the equipment you’re testing.

Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.