The shielding blocks signal interference from nearby equipment and devices.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

Use these unshielded cords where signal interference is not a concern.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications.

Connect computers, servers, and switches in a fiber-optic network.

Transmit video to a single monitor.

Connect devices such as computers, printers, and mobile devices.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure.

Power up mobile devices and other electronics.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Send high-definition signals to monitors, TVs, and projectors.

Securely connect equipment in data or signal applications. These cords have A- or B-coded plugs to meet the needs of your device.

Commonly used for movie, stage, and interior building lighting, these cords connect to equipment with five-pin XLR connections.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

Step on or roll carts and platform trucks over these M12 cords without crushing them.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Plug these cords into fans that have quick-disconnect terminals.

Power multiple devices from one power source.

All cords have a country-specific plug to power equipment from international outlets.

Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems.

The shielding blocks signal interference from nearby equipment and devices.

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems.

Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Connect batteries to each other or to electrical systems.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Designed for indoor applications, these cords are often used to power appliances.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Keep personnel safe from electric shock with these cords.

A locking lever on the female socket prevents your device from disconnecting.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Keep personnel safe from electric shock with these cords.

Connect multiple devices from a single outlet.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.

Power devices that have a straight-blade connection from a vehicle outlet.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Send power and signal to devices with M12 connections that are exposed to some of the toughest industrial stresses—from welding to metal machining and changing temperatures.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Simplify wiring and reduce the number of cords in your automation setup.

Protect against signal interference while sending 2-3 times more current than M12 connectors.

Reduce the number of cords needed to send and receive signals where space is tight.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

A TPE cable protects these connectors from oil, weld slag, and other tough industrial stresses as they send signal and power to low-current devices with M8 connections.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Choose a socket that works with your Siemens servomotor system.

Connectors lock into place for a secure connection in high-vibration environments. They power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Protect sensitive equipment from electromagnetic interference.

Mount these adapters in a panel cutout.

These panel-mount adapters have a female USB connection on both ends to join two USB cables.

Adapt connections to attach cords to a computer.

Mount these adapters in a panel cutout.

Join coaxial cords even if they are a different style or the same gender.

Connect two fiber-optic cords that have the same gender and fiber-optic connection type.

Extend an audio connection by plugging a cord into each end of these adapters.

Connect two fiber-optic cords that have the same gender and connection type. These adapters mount to panels of any thickness, as long as you drill a mounting hole first.

Mount two coaxial cords of the same gender and coaxial connection directly onto a panel cutout.

Connect two DisplayPort cords of the same gender and connection type.

Protect connections in washdown environments while maintaining access—these RJ45 plugs and adapters latch together securely, yet quickly detach.

Assemble DB and HD connectors to replace worn out connectors.

FDA compliant to safely touch food and threaded for a tight hold, these connectors won’t vibrate loose as they send high-speed data to sensors and other automated devices in food, beverage, and pharmaceutical plants.

Connect oscilloscopes and other bench-top testers.

Pairs of red and black test leads are ready to connect to a multimeter or other electrical test equipment.

These kits include a set of red and black Fluke test leads with a variety of interchangeable tips.

Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.

Extend the distance between your multimeter and the equipment you’re testing.

Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.