Mix and match bases to create a workbench with the right amount of storage space. Pair bases with a workbench top.

Each drawer and door has one knockout for adding an optional lock.

Store your heaviest tools and parts in these bases. Pair bases with a workbench top.

Bases have a single cylinder lock that locks all drawers at once.

Panel legs support the bench top when using only one drawer base. They have knockouts to accept duplex electrical outlets.

Footrest attaches to cabinets and panel legs. It has pre-punched holes to adjust the width.

These workbenches have bases with a combination of drawers and doors that offer plenty of storage options for tools and parts.

Styles A-C have a padlock hasp on all doors and drawers to add your own padlocks. Style A also have knockouts in the leg to accept duplex electrical outlets.

Styles D-H come with built-in outlets, a power switch, and a circuit breaker.

Optional upper shelves have electrical outlets and a power switch.

Use individual components to make or repair a bench.

Bench seats are maple, which is durable and impact resistant.

Pedestal legs support almost four times as much weight as folding legs.

Folding legs fold flat against the bench for easy transport and storage.

Note: When installing pedestal legs on benches wider than 96", use three legs. For folding legs, use three legs on benches wider than 72".

Install these bases in different areas of your plant and slot in your hand-winch crane where needed. They can also be used to replace existing bases.

These cranes are half the weight of other hand-winch cranes with similar capacity and can be lifted from their base for easy transport. They're also known as davit cranes. Use them to lift objects out of holes such as sewers. Made from fiberglass, all are corrosion resistant and nonconductive. An automatic brake holds your load securely when the handle is released.

Install additional bases throughout your plant and move your hand-winch crane between them to use a single crane in multiple locations. They can also be used to replace existing bases.

Warning: Never use to lift people or items over people.

Take your Universal Robots arm to new heights—these bases move up and down to extend your robot’s vertical reach for high and low stacking jobs. Often used for loading boxes off a conveyor, they start at ground level and reach higher as they need to stack boxes on top of each other. The bases have a mounting plate, base controller, and software plug-in for connecting, operating, and programming your arm. They become an extension of the arm, so you can program how they move as part of the robot's work cycle. Use the threaded holes on the bases and mounting plate to attach accessories, such as a cable management system.

These bases are all Universal Robots+ (UR+) certified products, and have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair these bases with Positioning Slides for Universal Robots to also extend the horizontal reach of your robot’s arm.

For technical drawings and 3-D models, click on a part number.

Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations. Made from steel, these bases are strong and built to last—they’re also machinable and weldable, so you can modify the mounting plates to suit your application. Secure them to the ground or other flat surface using the holes in the bottom plate. These holes are also designed to level the bases—thread fasteners (not included) through each hole and adjust their depth to compensate for uneven floors.

Bases with bolt-on mounts come with mounting holes that match the patterns on commonly used robot arms. For a custom mounting pattern, drill your own holes onto bases with blank mounts.

45° bases tilt your robot arm forward so that it can reach lower than if it were mounted horizontally. These bases help your robot arm reach inside machines or deep boxes, or downward onto a work surface. Mount them to a flat surface, or to the top of another base with a cable routing hole. They include fasteners to attach them to another base, but not to flat surfaces.

Bases with cable routing hole are hollow, so you can feed cables, wires, and tubes through the center column. These bases help keep your cables organized and out of the way.

Attach t-slotted framing kits to square bases as a support for accessories, such as teach pendants, or to build custom cable management systems onto your base.

For technical drawings and 3-D models, click on a part number.

Store your heaviest tools and parts. Use cabinets individually or stacked.

Note: Only stack cabinets with the same width and depth dimensions. Do not exceed the overall capacity of the bottom cabinet.