Filter by
Thread Size
Thread Type
Thread Spacing
Thread Fit
DFARS Compliance
About Threaded Studs and Rods
More
Steel Press-Fit Studs
These steel studs are zinc plated to resist corrosion in wet environments. Press them into a drilled or punched hole with an arbor press or similar pressure tool. Also known as self-clinching studs, ribs under the head hold the stud firmly in place. Length listed is overall length.
For technical drawings and 3-D models, click on a part number.
| Lg. | PEM® Part Number | Thread Lg. | Drill Bit Size | For Min. Material Thick. | For Min. Lg. Between Hole Center and Sheet Edge | For Hole Dia. | Hole Size Tolerance | Base Dia. | Tensile Strength  | Hardness | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2-56 | |||||||||||||
| 1/4" | FH-256-4 | 11/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 000000 |
| 5/16" | FH-256-5 | 15/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FH-256-6 | 19/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 1/2" | FH-256-8 | 31/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 5/8" | FH-256-10 | 35/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-256-12 | 43/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.159" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
4-40 | |||||||||||||
| 1/4" | FH-440-4 | 5/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/16" | FH-440-5 | 15/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/8" | FH-440-6 | 9/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 1/2" | FH-440-8 | 13/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/8" | FH-440-10 | 17/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/4" | FH-440-12 | 43/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-440-14 | 51/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FH-440-16 | 59/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FH-440-20 | 1 11/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
6-32 | |||||||||||||
| 1/4" | FH-632-4 | 5/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/16" | FH-632-5 | 7/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 3/8" | FH-632-6 | 9/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 1/2" | FH-632-8 | 13/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
| 5/8" | FH-632-10 | 17/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/4" | FH-632-12 | 21/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 7/8" | FH-632-14 | 25/32" | 3.5 mm | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-632-16 | 29/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 1 1/4" | FH-632-20 | 1 5/32" | 3.5 mm | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/2" | FH-632-24 | 1 13/32" | 3.5 mm | 0.040" | 1/4" | 0.138" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
8-32 | |||||||||||||
| 1/4" | FH-832-4 | 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 5/16" | FH-832-5 | 7/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 3/8" | FH-832-6 | 9/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 0000 |
| 1/2" | FH-832-8 | 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-832-10 | 17/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-832-12 | 21/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-832-14 | 25/32" | No. 20 | 0.040" | 9/32" | 0.161" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-832-16 | 29/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | FH-832-20 | 1 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/2" | FH-832-24 | 1 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
10-24 | |||||||||||||
| 5/16" | FH-024-5 | 7/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | FH-024-6 | 17/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FH-024-8 | 25/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-024-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-024-12 | 41/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-024-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-024-16 | 57/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | FH-024-20 | 1 5/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1 1/2" | FH-024-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
10-32 | |||||||||||||
| 5/16" | FH-032-5 | 7/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | FH-032-6 | 17/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FH-032-8 | 25/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-032-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | FH-032-12 | 41/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 7/8" | FH-032-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | FH-032-16 | 57/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | FH-032-20 | 1 9/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/2" | FH-032-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
1/4"-20 | |||||||||||||
| 3/8" | FH-0420-6 | 15/64" | 1/4" | 0.062" | 5/16" | 1/4" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | FH-0420-8 | 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FH-0420-10 | 31/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FH-0420-12 | 39/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FH-0420-14 | 47/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FH-0420-16 | 55/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/8" | FH-0420-18 | 63/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/4" | FH-0420-20 | 1 7/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | FH-0420-24 | 1 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 2" | FH-0420-32 | 1 55/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
5/16"-18 | |||||||||||||
| 1/2" | FH-0518-8 | 11/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | FH-0518-10 | 15/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FH-0518-12 | 19/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FH-0518-14 | 23/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1" | FH-0518-16 | 27/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/4" | FH-0518-20 | 1 5/64" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/2" | FH-0518-24 | 1 21/64" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.391" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| Lg., mm | Thread Pitch, mm | PEM® Part Number | Thread Lg., mm | Drill Bit Size | For Min. Material Thick., mm | For Min. Lg. Between Hole Center and Sheet Edge, mm | For Hole Dia., mm | Hole Size Tolerance, mm | Base Dia., mm | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
Metric Zinc-Plated Steel | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M2.5 | ||||||||||||||
| 6 | 0.45 | FH-M2.5-6 | 4 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 50 | 000000000 | 000000 |
| 10 | 0.45 | FH-M2.5-10 | 8 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.45 | FH-M2.5-15 | 13 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.45 | FH-M2.5-18 | 16 | No. 40 | 1.000 | 5.5 | 2.5 | 0.000 to 0.08 | 4.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M3 | ||||||||||||||
| 6 | 0.5 | FH-M3-6 | 4 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 8 | 0.5 | FH-M3-8 | 6 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 10 | 0.5 | FH-M3-10 | 8 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.5 | FH-M3-12 | 10 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.5 | FH-M3-15 | 13 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.5 | FH-M3-18 | 16 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 20 | 0.5 | FH-M3-20 | 18 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 25 | 0.5 | FH-M3-25 | 23 | 3.0 mm | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M3.5 | ||||||||||||||
| 8 | 0.6 | FH-M3.5-8 | 6 | 3.5 mm | 1.000 | 6.5 | 3.5 | 0.000 to 0.08 | 5.7 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 10 | 0.6 | FH-M3.5-10 | 8 | 3.5 mm | 1.000 | 6.5 | 3.5 | 0.000 to 0.08 | 5.7 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.6 | FH-M3.5-12 | 10 | 3.5 mm | 1.000 | 6.5 | 3.5 | 0.000 to 0.08 | 5.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M4 | ||||||||||||||
| 6 | 0.7 | FH-M4-6 | 4 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 8 | 0.7 | FH-M4-8 | 6 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 10 | 0.7 | FH-M4-10 | 8 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.7 | FH-M4-12 | 10 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.7 | FH-M4-15 | 13 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.7 | FH-M4-18 | 16 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 20 | 0.7 | FH-M4-20 | 18 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 25 | 0.7 | FH-M4-25 | 23 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 30 | 0.7 | FH-M4-30 | 28 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 0.7 | FH-M4-35 | 33 | No. 22 | 1.000 | 7 | 4 | 0.000 to 0.08 | 6.3 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M5 | ||||||||||||||
| 8 | 0.8 | FH-M5-8 | 5 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.8 | FH-M5-10 | 7 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.8 | FH-M5-12 | 9 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 15 | 0.8 | FH-M5-15 | 12 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 18 | 0.8 | FH-M5-18 | 15 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 20 | 0.8 | FH-M5-20 | 17 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 25 | 0.8 | FH-M5-25 | 22 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 30 | 0.8 | FH-M5-30 | 27 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 0.8 | FH-M5-35 | 32 | 5.0 mm | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.9 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M6 | ||||||||||||||
| 10 | 1 | FH-M6-10 | 7 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 1 | FH-M6-12 | 9 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 15 | 1 | FH-M6-15 | 12 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 18 | 1 | FH-M6-18 | 15 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 1 | FH-M6-20 | 17 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 25 | 1 | FH-M6-25 | 22 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 30 | 1 | FH-M6-30 | 27 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 1 | FH-M6-35 | 32 | 6.0 mm | 1.600 | 8 | 6 | 0.000 to 0.08 | 8.6 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
M8 | ||||||||||||||
| 12 | 1.25 | FH-M8-12 | 8 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 15 | 1.25 | FH-M8-15 | 11 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 1.25 | FH-M8-20 | 16 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 25 | 1.25 | FH-M8-25 | 21 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 30 | 1.25 | FH-M8-30 | 26 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 35 | 1.25 | FH-M8-35 | 31 | 8.0 mm | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 10 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
Stainless Steel Press-Fit Studs
18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Press them into a drilled or punched hole with an arbor press or similar pressure tool. Also known as self-clinching studs, ribs under the head hold the stud firmly in place. Length listed is overall length.
For technical drawings and 3-D models, click on a part number.
| Lg. | PEM® Part Number | Thread Lg. | Drill Bit Size | For Min. Material Thick. | For Min. Lg. Between Hole Center and Sheet Edge | For Hole Dia. | Hole Size Tolerance | Base Dia. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4-40 | |||||||||||||
| 1/4" | FHS-440-4 | 5/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 000000 |
| 5/16" | FHS-440-5 | 7/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-440-6 | 9/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FHS-440-8 | 13/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/8" | FHS-440-10 | 35/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-440-12 | 21/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 7/8" | FHS-440-14 | 51/64" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1" | FHS-440-16 | 29/32" | No. 34 | 0.040" | 7/32" | 0.111" | 0.000" to 0.003" | 0.191" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
6-32 | |||||||||||||
| 1/4" | FHS-632-4 | 5/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/16" | FHS-632-5 | 7/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-632-6 | 9/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-632-8 | 13/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-632-10 | 17/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-632-12 | 21/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 7/8" | FHS-632-14 | 25/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-632-16 | 29/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1 1/4" | FHS-632-20 | 1 5/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | FHS-632-24 | 1 13/32" | 3.5 mm | 0.040" | 1/4" | 0.137" | 0.000" to 0.003" | 0.221" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
8-32 | |||||||||||||
| 1/4" | FHS-832-4 | 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/16" | FHS-832-5 | 7/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-832-6 | 9/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-832-8 | 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-832-10 | 17/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-832-12 | 21/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 7/8" | FHS-832-14 | 25/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-832-16 | 29/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.252" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FHS-832-20 | 1 5/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | FHS-832-24 | 1 13/32" | No. 20 | 0.040" | 9/32" | 0.163" | 0.000" to 0.003" | 0.222" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
10-24 | |||||||||||||
| 3/8" | FHS-024-6 | 9/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-024-8 | 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 5/8" | FHS-024-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FHS-024-12 | 21/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FHS-024-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-024-16 | 29/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FHS-024-20 | 1 5/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/2" | FHS-024-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.241" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
10-32 | |||||||||||||
| 5/16" | FHS-032-5 | 7/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | FHS-032-6 | 9/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 1/2" | FHS-032-8 | 25/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-032-10 | 33/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-032-12 | 41/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 7/8" | FHS-032-14 | 49/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1" | FHS-032-16 | 57/64" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | FHS-032-20 | 1 5/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/2" | FHS-032-24 | 1 13/32" | No. 12 | 0.040" | 9/32" | 0.189" | 0.000" to 0.003" | 0.271" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
1/4"-20 | |||||||||||||
| 3/8" | FHS-0420-6 | 15/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1/2" | FHS-0420-8 | 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | FHS-0420-10 | 31/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/4" | FHS-0420-12 | 39/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 7/8" | FHS-0420-14 | 47/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1" | FHS-0420-16 | 55/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 1 1/4" | FHS-0420-20 | 1 7/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1 1/2" | FHS-0420-24 | 1 23/64" | 1/4" | 0.062" | 5/16" | 0.249" | 0.000" to 0.003" | 0.352" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
5/16"-18 | |||||||||||||
| 1/2" | FHS-0518 -8 | 11/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | FHS-0518-10 | 15/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | FHS-0518-12 | 19/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 7/8" | FHS-0518-14 | 23/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1" | FHS-0518-16 | 27/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1 1/4" | FHS-0518-20 | 1 3/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 5 | 000000000 | 0000 |
| 1 1/2" | FHS-0518-24 | 1 11/32" | N | 0.093" | 3/8" | 0.311" | 0.000" to 0.003" | 0.361" | Not Rated | Not Rated | 5 | 000000000 | 0000 |
2-56 | |||||||||||||
| 1/4" | FHS-256-4 | 5/32" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 5/16" | FHS-256-5 | 7/32" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/8" | FHS-256-6 | 5/16" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1/2" | FHS-256-8 | 27/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 5/8" | FHS-256-10 | 35/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 3/4" | FHS-256-12 | 43/64" | No. 44 | 0.040" | 3/16" | 0.085" | 0.000" to 0.003" | 0.129" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| Lg., mm | Thread Pitch, mm | PEM® Part Number | Thread Lg., mm | Drill Bit Size, mm | For Min. Material Thick., mm | For Min. Lg. Between Hole Center and Sheet Edge, mm | For Hole Dia., mm | Hole Size Tolerance, mm | Base Dia., mm | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
Metric 18-8 Stainless Steel | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M2.5 | ||||||||||||||
| 6 | 0.45 | FHS-M2.5-6 | 4 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 000000 |
| 8 | 0.45 | FHS-M2.5-8 | 6 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.45 | FHS-M2.5-10 | 8 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 0.45 | FHS-M2.5-12 | 10 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 15 | 0.45 | FHS-M2.5-15 | 13 | 2.5 | 1.000 | 5 | 2.5 | 0.000 to 0.08 | 3.7 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
M3 | ||||||||||||||
| 6 | 0.5 | FHS-M3-6 | 4 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 8 | 0.5 | FHS-M3-8 | 6 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.5 | FHS-M3-10 | 8 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 12 | 0.5 | FHS-M3-12 | 10 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 15 | 0.5 | FHS-M3-15 | 13 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 0000 |
| 18 | 0.5 | FHS-M3-18 | 16 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 0.5 | FHS-M3-20 | 18 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 25 | 0.5 | FHS-M3-25 | 23 | 3.0 | 1.000 | 5.5 | 3 | 0.000 to 0.08 | 4.2 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
M4 | ||||||||||||||
| 6 | 0.7 | FHS-M4-6 | 4 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 8 | 0.7 | FHS-M4-8 | 6 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 10 | 0.7 | FHS-M4-10 | 8 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 0.7 | FHS-M4-12 | 10 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 15 | 0.7 | FHS-M4-15 | 13 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 18 | 0.7 | FHS-M4-18 | 16 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 0.7 | FHS-M4-20 | 18 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 25 | 0.7 | FHS-M4-25 | 23 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 35 | 0.7 | FHS-M4-35 | 33 | 4.0 | 1.000 | 7 | 4 | 0.000 to 0.08 | 5.5 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M5 | ||||||||||||||
| 8 | 0.8 | FHS-M5-8 | 5 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 10 | 0.8 | FHS-M5-10 | 7 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 0.8 | FHS-M5-12 | 9 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 15 | 0.8 | FHS-M5-15 | 12 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 18 | 0.8 | FHS-M5-18 | 15 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 20 | 0.8 | FHS-M5-20 | 17 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 25 | 0.8 | FHS-M5-25 | 22 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 30 | 0.8 | FHS-M5-30 | 27 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 35 | 0.8 | FHS-M5-35 | 32 | 5.0 | 1.000 | 7 | 5 | 0.000 to 0.08 | 6.1 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M6 | ||||||||||||||
| 10 | 1 | FHS-M6-10 | 7 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 12 | 1 | FHS-M6-12 | 9 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 15 | 1 | FHS-M6-15 | 12 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 18 | 1 | FHS-M6-18 | 15 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 20 | 1 | FHS-M6-20 | 17 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 25 | 1 | FHS-M6-25 | 22 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 30 | 1 | FHS-M6-30 | 27 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 35 | 1 | FHS-M6-35 | 32 | 6.0 | 1.600 | 8 | 6 | 0.000 to 0.08 | 7.8 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
M8 | ||||||||||||||
| 15 | 1.25 | FHS-M8-15 | 11 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 18 | 1.25 | FHS-M8-18 | 14 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 20 | 1.25 | FHS-M8-20 | 16 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 25 | 1.25 | FHS-M8-25 | 21 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 30 | 1.25 | FHS-M8-30 | 26 | 8.0 | 2.400 | 9.5 | 8 | 0.000 to 0.08 | 9.2 | Not Rated | Not Rated | 5 | 000000000 | 00000 |
Captive Pins
Also known as pilot pins, use these pins to position, pivot, and align components. To install, punch or drill a hole in sheet metal, then use a punch and anvil or arbor press to clinch the head to the metal.
Pins are passivated for added protection against corrosion and oxidation. The ends are chamfered for easy insertion.
PEM® TPS pins work on steel or aluminum sheets. Made of 18-8 stainless steel, they offer a balance of strength and corrosion resistance and may be mildly magnetic.
PEM® TP4 pins work on stainless steel sheets. Made of 400 series stainless steel, they resist wear and abrasion, but are not as corrosion resistant as 18-8 stainless steel pins. Pins may be mildly magnetic.
PEM® MPP pins work with most materials. Made of A286 stainless steel, they're our strongest captive pins, with corrosion resistance comparable to 18-8 stainless steel pins. They are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Lg. | Dia. Tolerance | PEM® Part No. | For Min. Panel Thick. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
1/8" Dia. | ||||||
| 3/8" | -0.002" to 0.002" | TPS-125-6 | 0.04" | 50 | 000000000 | 000000 |
| 1/2" | -0.002" to 0.002" | TPS-125-8 | 0.04" | 50 | 000000000 | 00000 |
| 5/8" | -0.002" to 0.002" | TPS-125-10 | 0.04" | 50 | 000000000 | 00000 |
| 3/4" | -0.002" to 0.002" | TPS-125-12 | 0.04" | 25 | 000000000 | 0000 |
3/16" Dia. | ||||||
| 3/8" | -0.002" to 0.002" | TPS-187-6 | 0.04" | 25 | 000000000 | 00000 |
| 1/2" | -0.002" to 0.002" | TPS-187-8 | 0.04" | 25 | 000000000 | 00000 |
| 5/8" | -0.002" to 0.002" | TPS-187-10 | 0.04" | 25 | 000000000 | 00000 |
| 3/4" | -0.002" to 0.002" | TPS-187-12 | 0.04" | 25 | 000000000 | 00000 |
| 1" | -0.002" to 0.002" | TPS-187-16 | 0.04" | 25 | 000000000 | 00000 |
1/4" Dia. | ||||||
| 1/2" | -0.002" to 0.002" | TPS-250-8 | 0.04" | 25 | 000000000 | 00000 |
| 5/8" | -0.002" to 0.002" | TPS-250-10 | 0.04" | 25 | 000000000 | 00000 |
| 3/4" | -0.002" to 0.002" | TPS-250-12 | 0.04" | 10 | 000000000 | 0000 |
| 1" | -0.002" to 0.002" | TPS-250-16 | 0.04" | 25 | 000000000 | 00000 |
400 Series Stainless Steel | ||||||
1/8" Dia. | ||||||
| 3/8" | -0.002" to 0.002" | TP4-125-6 | 0.04" | 25 | 000000000 | 0000 |
| 1/2" | -0.002" to 0.002" | TP4-125-8 | 0.04" | 25 | 000000000 | 0000 |
| 5/8" | -0.002" to 0.002" | TP4-125-10 | 0.04" | 25 | 000000000 | 00000 |
| 3/4" | -0.002" to 0.002" | TP4-125-12 | 0.04" | 25 | 000000000 | 0000 |
3/16" Dia. | ||||||
| 3/8" | -0.002" to 0.002" | TP4-187-6 | 0.04" | 25 | 000000000 | 00000 |
| 1/2" | -0.002" to 0.002" | TP4-187-8 | 0.04" | 25 | 000000000 | 00000 |
| 5/8" | -0.002" to 0.002" | TP4-187-10 | 0.04" | 25 | 000000000 | 00000 |
| 3/4" | -0.002" to 0.002" | TP4-187-12 | 0.04" | 25 | 000000000 | 00000 |
| 1" | -0.002" to 0.002" | TP4-187-16 | 0.04" | 25 | 000000000 | 00000 |
1/4" Dia. | ||||||
| 1/2" | -0.002" to 0.002" | TP4-250-8 | 0.04" | 25 | 000000000 | 00000 |
| 5/8" | -0.002" to 0.002" | TP4-250-10 | 0.04" | 25 | 000000000 | 00000 |
| 3/4" | -0.002" to 0.002" | TP4-250-12 | 0.04" | 25 | 000000000 | 00000 |
| 1" | -0.002" to 0.002" | TP4-250-16 | 0.04" | 25 | 000000000 | 00000 |
Metric 18-8 Stainless Steel | ||||||
3mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TPS-3MM-8 | 1mm | 25 | 000000000 | 0000 |
| 10mm | -0.05mm to 0.05mm | TPS-3MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TPS-3MM-12 | 1mm | 25 | 000000000 | 0000 |
| 16mm | -0.05mm to 0.05mm | TPS-3MM-16 | 1mm | 25 | 000000000 | 0000 |
4mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TPS-4MM-8 | 1mm | 25 | 000000000 | 0000 |
| 10mm | -0.05mm to 0.05mm | TPS-4MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TPS-4MM-12 | 1mm | 25 | 000000000 | 0000 |
| 16mm | -0.05mm to 0.05mm | TPS-4MM-16 | 1mm | 25 | 000000000 | 0000 |
5mm Dia. | ||||||
| 10mm | -0.05mm to 0.05mm | TPS-5MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TPS-5MM-12 | 1mm | 25 | 000000000 | 0000 |
| 16mm | -0.05mm to 0.05mm | TPS-5MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TPS-5MM-20 | 1mm | 25 | 000000000 | 00000 |
6mm Dia. | ||||||
| 12mm | -0.05mm to 0.05mm | TPS-6MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TPS-6MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TPS-6MM-20 | 1mm | 25 | 000000000 | 00000 |
Metric 400 Series Stainless Steel | ||||||
3mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TP4-3MM-8 | 1mm | 25 | 000000000 | 0000 |
| 10mm | -0.05mm to 0.05mm | TP4-3MM-10 | 1mm | 25 | 000000000 | 0000 |
| 12mm | -0.05mm to 0.05mm | TP4-3MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-3MM-16 | 1mm | 25 | 000000000 | 00000 |
4mm Dia. | ||||||
| 8mm | -0.05mm to 0.05mm | TP4-4MM-8 | 1mm | 25 | 000000000 | 0000 |
| 10mm | -0.05mm to 0.05mm | TP4-4MM-10 | 1mm | 25 | 000000000 | 00000 |
| 12mm | -0.05mm to 0.05mm | TP4-4MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-4MM-16 | 1mm | 25 | 000000000 | 00000 |
5mm Dia. | ||||||
| 10mm | -0.05mm to 0.05mm | TP4-5MM-10 | 1mm | 25 | 000000000 | 00000 |
| 12mm | -0.05mm to 0.05mm | TP4-5MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-5MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TP4-5MM-20 | 1mm | 25 | 000000000 | 00000 |
6mm Dia. | ||||||
| 12mm | -0.05mm to 0.05mm | TP4-6MM-12 | 1mm | 25 | 000000000 | 00000 |
| 16mm | -0.05mm to 0.05mm | TP4-6MM-16 | 1mm | 25 | 000000000 | 00000 |
| 20mm | -0.05mm to 0.05mm | TP4-6MM-20 | 1mm | 25 | 000000000 | 00000 |
Metric A286 Stainless Steel | ||||||
1mm Dia. | ||||||
| 2mm | -0.038mm to 0.038mm | MPP-1MM-2 | 0.5mm | 25 | 000000000 | 00000 |
| 3mm | -0.038mm to 0.038mm | MPP-1MM-3 | 0.5mm | 25 | 000000000 | 00000 |
| 4mm | -0.038mm to 0.038mm | MPP-1MM-4 | 0.5mm | 25 | 000000000 | 00000 |
| 5mm | -0.038mm to 0.038mm | MPP-1MM-5 | 0.5mm | 25 | 000000000 | 00000 |
1.5mm Dia. | ||||||
| 3mm | -0.038mm to 0.038mm | MPP-1.5MM-3 | 0.5mm | 25 | 000000000 | 00000 |
| 4mm | -0.038mm to 0.038mm | MPP-1.5MM-4 | 0.5mm | 25 | 000000000 | 00000 |
| 5mm | -0.038mm to 0.038mm | MPP-1.5MM-5 | 0.5mm | 25 | 000000000 | 00000 |
| 6mm | -0.038mm to 0.038mm | MPP-1.5MM-6 | 0.5mm | 25 | 000000000 | 00000 |
| 8mm | -0.038mm to 0.038mm | MPP-1.5MM-8 | 0.5mm | 25 | 000000000 | 00000 |
2mm Dia. | ||||||
| 4mm | -0.038mm to 0.038mm | MPP-2MM-4 | 0.5mm | 25 | 000000000 | 00000 |
| 5mm | -0.038mm to 0.038mm | MPP-2MM-5 | 0.5mm | 25 | 000000000 | 00000 |
| 6mm | -0.038mm to 0.038mm | MPP-2MM-6 | 0.5mm | 25 | 000000000 | 00000 |
| 8mm | -0.038mm to 0.038mm | MPP-2MM-8 | 0.5mm | 25 | 000000000 | 00000 |
| 10mm | -0.038mm to 0.038mm | MPP-2MM-10 | 0.5mm | 25 | 000000000 | 00000 |
Captive Fastening Pins for Soft Materials
The grooves in these pins grip plastics and other soft materials. Press them in to hold panels together. Also known as PEM® TackSert pins, their small size makes them suitable for use in electronic assemblies.
PEM® TK4 pins are used to attach sheets to cast aluminum and other brittle materials. They are made of 400 series stainless steel to resist wear and abrasion and may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.
PEM® TKA pins are used to attach sheets to plastics. They're made of aluminum and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Head | For Hole Dia. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | (A) | (B) | For Max. Panel Thick. (C) | PEM® Part No. | Pkg. Qty. | Pkg. | |
400 Series Stainless Steel | |||||||||
0.047" Dia. | |||||||||
| 0.039" | 0.071" | 0.011" | 0.051" | 0.039" | 0.008" | TK4-10-100 | 25 | 000000000 | 00000 |
| 0.059" | 0.071" | 0.011" | 0.051" | 0.039" | 0.028" | TK4-10-150 | 25 | 000000000 | 0000 |
| 0.079" | 0.071" | 0.011" | 0.051" | 0.039" | 0.047" | TK4-10-200 | 25 | 000000000 | 0000 |
| 0.098" | 0.071" | 0.011" | 0.051" | 0.039" | 0.067" | TK4-10-250 | 25 | 000000000 | 0000 |
| 0.118" | 0.071" | 0.011" | 0.051" | 0.039" | 0.087" | TK4-10-300 | 25 | 000000000 | 0000 |
Aluminum | |||||||||
0.047" Dia. | |||||||||
| 0.039" | 0.071" | 0.011" | 0.051" | 0.039" | 0.008" | TKA-10-100 | 25 | 000000000 | 0000 |
| 0.059" | 0.071" | 0.011" | 0.051" | 0.039" | 0.028" | TKA-10-150 | 25 | 000000000 | 0000 |
| 0.079" | 0.071" | 0.011" | 0.051" | 0.039" | 0.047" | TKA-10-200 | 25 | 000000000 | 0000 |
| 0.098" | 0.071" | 0.011" | 0.051" | 0.039" | 0.067" | TKA-10-250 | 25 | 000000000 | 0000 |
| 0.118" | 0.071" | 0.011" | 0.051" | 0.039" | 0.087" | TKA-10-300 | 25 | 000000000 | 0000 |
Captive Fastening Pins
Often used in cell phones and laptops, these pins attach thin panels such as printed circuit boards to metal and plastic bases. Also known as PEM® TackPins.
PEM® T4 pins are used to attach sheets to stainless steel. They are made of 400 series stainless steel to resist wear and abrasion and may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.
PEM® TA pins work with most materials. They are made of aluminum and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Head | For Hole Dia. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. Tolerance | Dia. | Ht. | (A) | (B) | For Panel Thick. (C) | For Min. Panel Thick. (D) | PEM® Part No. | Pkg. Qty. | Pkg. | |
400 Series Stainless Steel | |||||||||||
0.051" Dia. | |||||||||||
| 0.04" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.008"-0.011" | 0.035" | T4-10-025 | 25 | 000000000 | 00000 |
Aluminum | |||||||||||
0.051" Dia. | |||||||||||
| 0.04" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.008"-0.011" | 0.035" | TA-10-025 | 25 | 000000000 | 0000 |
| 0.051" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.019"-0.022" | 0.035" | TA-10-050 | 25 | 000000000 | 0000 |
| 0.06" | -0.002" to 0.002" | 0.079" | 0.008" | 0.058" | 0.04" | 0.028"-0.031" | 0.035" | TA-10-075 | 25 | 000000000 | 0000 |