In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

More sustainable than standard UHMW, these sheets and bars are made from partially recycled material, so they have a lower carbon footprint.

Made with carbon black, these recycled UHMW sheets are a sustainable alternative to standard UHMW sheets in applications where static electricity is a concern, such as in conveying equipment and chute liners.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Also known as Tivar H.O.T., this material lasts up to 10 times longer in high-temperature applications than standard UHMW.

This oil-filled material is self-lubricating for an extra-slippery surface.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.

A polyester string reinforcement gives this material better tear resistance than standard LDPE film.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

An aluminum coating on one side of this film reflects heat, so it’s widely used as an insulator and in packaging applications.

Polyester resists swelling in wet environments.

Made with virgin Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

Kapton® polyimide film is an excellent electrical insulator.

Because this film dissipates heat, it is often used for printed circuit boards and power supplies.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Common in food and pharmaceutical plants, these PEEK sheets and bars help you identify contaminated batches.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

A static-dissipative coating on this cast acrylic prevents electrostatic discharge from damaging sensitive electronic equipment.

Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Enhanced UV resistance makes this polycarbonate better than standard polycarbonate for outdoor use.

This polycarbonate has a static-dissipative coating that prevents electrostatic discharge from damaging sensitive electronic equipment.

Carbon mesh is embedded into this clear PVC film to dissipate electrostatic discharge and protect sensitive electronic equipment.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

PFA film retains its performance properties through a wide range of temperatures. It is often used to insulate cables.

PETG can be formed into complex shapes without sacrificing durability.

A static-dissipative coating on this polyester film prevents electrostatic discharge from damaging sensitive electronic equipment.

Packs include one 2” square of ABS, Delrin® acetal, LDPE, HDPE, UHMW, nylon, cast nylon, polyester, polystyrene, Rexolite polystyrene, and Noryl PPO.

Each selector pack includes one 2” square of FEP, polypropylene, PPS, PVC, CPVC, PVDF, and Teflon® PTFE.

Resistant to scratches and scuffs, mirrored acrylic is an economical alternative to mirrored polycarbonate.

Cut this stock into custom shapes to fit your application.

This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.

These thick shims are scored to make size adjustments easy—break off the excess shim for a custom fit around fasteners or corners. Use them to align cabinets, doors, and windows, or for other rough leveling.

These sheets are stronger than our other plastic perforated sheets for greater impact and abrasion resistance.

Use thesee sheets for machine guards and protective panels in noncorrosive environments.

These sheets have good corrosion resistance, weldability, and formability. Aluminum is lightweight.

Harder and stronger than our other aluminum perforated sheets, these sheets have greater wear resistance.

Use this stiff mesh to contain, reinforce, separate, or protect materials.

Made of FDA-listed materials, this mesh withstands temperatures up to 475° F.

This wear-resistant nylon mesh has openings that meet an exact size tolerance, providing accurate, consistent results in filtering and sifting applications.

Use in outdoor applications.

Cut or fold this paper to the size and shape you need for liquid filtration applications.