The toughest bits available, these withstand the shock and twisting force of impact drivers.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

A wide tip makes good contact in shallow and coated screw recesses, such as those filled with paint.

Drive screws with both ends of these bits. Use with hand drivers.

Thread these bits directly into your driving tool for minimal wobble in assembly applications.

Turn two drive styles with one reversible bit. Remove and replace to change the tip.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

The slightly tapered tip wedges into the screw recess for a secure hold. These are also known as Torx-Align bits.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

A magnet holds the nut in place.

These bits have an offset cross shape.

Also known as Bristol bits, these have a knurled-end shank that allows finger tightening. They can also be used with the included screwdriver.

Use with screws that have two drilled holes.

Also known as Robertson bits these are designed for screws with a square recess in the head.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

Operate these tools like a standard bit driver and access hard-reach fasteners with the offset head. Insert a bit and a magnet holds it in place.

A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.

A ratchet mechanism turns fasteners more quickly than a standard bit driver. Insert a bit into the shaft and a magnet holds it in place.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN 60900 and IEC 60900.

When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.

Remove and replace the reversible shaft to change the tip of the tool. Sets include a handle and multiple shafts.

Sets include an assortment of drivers.

A scaled-down version of standard screwdrivers, these tools are shorter, slimmer, and easy to take with you.

Sets include an assortment of drivers with a cushioned grip that provides comfort and some slip resistance.

When working in tight spaces, these short drivers fit where others can't. They have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.

Sets include an assortment of drivers with soft, contoured handles that provide comfort and the best possible grip for achieving maximum torque.

Sets include an assortment of drivers with a suede-like textured handle that provides a firm grip, even for oily hands.

Sets include an assortment of drivers with a ring that can be secured with a lanyard to prevent drops. The ring rotates around the shaft so the driver turns freely.

A shaft that extends through the handle and a steel end cap gives these drivers the strength to absorb hammer blows.

Carry these slim-handled tools comfortably in your pocket.

Reduce slipping and stripping the screw recess. The tip of these drivers has ribbed grooves that grip the surface of the recess, minimizing the pressure required to achieve maximum torque.

The tips of these assorted drivers have ribbed grooves that grip the surface of the recess to reduce slipping and minimizing the pressure required to achieve maximum torque.

Protect your stainless steel screws by using a stainless steel driver. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These drivers eliminate that risk.

Sets include assorted drivers with an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

The handle on these assorted drivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They're also known as ESD-safe screwdrivers.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

The tip can be replaced when it becomes worn. These tools have a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.

Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

A magnetized tip holds the screw in place. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The tips are offset 90° to provide additional clearance when reaching over obstructions to turn fasteners.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.