Designed for indoor applications, these cords are often used to power appliances.

Stop electric shocks before they happen—these cords cut power to equipment when they detect an unsafe current.

All cords have a country-specific plug to power equipment from international outlets.

Plug these cords into fans that have quick-disconnect terminals.

Transfer power between your door frame and door to power electric locks or exit devices.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Plug these connectors into hazardous location devices. Using a NAMUR signal, they operate at a low current and voltage, so they prevent the risk of sparks and ignition in volatile areas.

Visually confirm your connector is working properly. A green light means your connector has power, while yellow means it has signal.

A TPE cable protects these connectors from oil, weld slag, and other tough industrial stresses as they send signal and power to low-current devices with M8 connections.

Minimize signal loss between low-current devices with M8 connections.

Visually check that your low-current devices with M8 connections are powered up and sending and receiving signals. These connectors illuminate green if they have power and yellow if they have signal.

Protect against signal interference while sending 2-3 times more current than M12 connectors.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Replace the switch on your circular saw.

Replace bearings, cords, screws, and other parts on Milwaukee portable band saws.

Replace blower wheels, cords, handles, and other components on heat guns.