Search Results
About Tapping Screws
More
Tamper-Resistant Hex Drive Rounded
Head Screws for Sheet Metal
Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver. Made from 18-8 stainless steel, they are chemical resistant and may be mildly magnetic. They penetrate 0.025" and thinner sheet metal. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
No. 6 | ||||||||
| 1/2" | 0.282" | 0.073" | 1/8" | No. 32 | 18 | 25 | 000000000 | 00000 |
| 3/4" | 0.282" | 0.073" | 1/8" | No. 32 | 18 | 25 | 000000000 | 00000 |
| 1" | 0.282" | 0.073" | 1/8" | No. 32 | 18 | 25 | 000000000 | 00000 |
No. 8 | ||||||||
| 1/2" | 0.312" | 0.087" | 5/32" | No. 29 | 15 | 25 | 000000000 | 0000 |
| 5/8" | 0.312" | 0.087" | 5/32" | No. 29 | 15 | 25 | 000000000 | 00000 |
| 3/4" | 0.312" | 0.087" | 5/32" | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1" | 0.312" | 0.087" | 5/32" | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.312" | 0.087" | 5/32" | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.312" | 0.087" | 5/32" | No. 29 | 15 | 25 | 000000000 | 00000 |
No. 10 | ||||||||
| 1/2" | 0.361" | 0.101" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 3/4" | 0.361" | 0.101" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1" | 0.361" | 0.101" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.361" | 0.101" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.361" | 0.101" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 2" | 0.361" | 0.101" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
No. 14 | ||||||||
| 3/4" | 0.437" | 0.132" | 5/32" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 1" | 0.437" | 0.132" | 5/32" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.437" | 0.132" | 5/32" | 5.5 mm | 10 | 10 | 000000000 | 0000 |
Tamper-Resistant Hex Drive Flat
Head Screws for Sheet Metal
Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver. They're beveled under the head for a flush finish in countersunk holes. Made from 18-8 stainless steel, they are chemical resistant and may be mildly magnetic. Screws penetrate 0.025" and thinner sheet metal. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
No. 6 | ||||||||
| 1/2" | 0.307" | 0.097" | 1/8" | No. 32 | 18 | 25 | 000000000 | 00000 |
| 3/4" | 0.307" | 0.097" | 1/8" | No. 32 | 18 | 25 | 000000000 | 00000 |
| 1" | 0.307" | 0.097" | 1/8" | No. 32 | 18 | 25 | 000000000 | 00000 |
No. 8 | ||||||||
| 1/2" | 0.359" | 0.112" | 5/32" | No. 29 | 15 | 25 | 000000000 | 0000 |
| 3/4" | 0.359" | 0.112" | 5/32" | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1" | 0.359" | 0.112" | 5/32" | No. 29 | 15 | 25 | 000000000 | 00000 |
No. 10 | ||||||||
| 1/2" | 0.411" | 0.127" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 3/4" | 0.411" | 0.127" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1" | 0.411" | 0.127" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.411" | 0.127" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.411" | 0.127" | 5/32" | No. 21 | 12 | 25 | 000000000 | 00000 |
No. 14 | ||||||||
| 3/4" | 0.531" | 0.161" | 5/32" | 5.5 mm | 10 | 10 | 000000000 | 0000 |
| 1" | 0.531" | 0.161" | 5/32" | 5.5 mm | 10 | 10 | 000000000 | 0000 |
| 1 1/4" | 0.531" | 0.161" | 5/32" | 5.5 mm | 10 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.531" | 0.161" | 5/32" | 5.5 mm | 10 | 10 | 000000000 | 0000 |