Filter by
DFARS Specialty Metals
Export Control Classification Number (ECCN)
RoHS
Mating Locating Pins and Hole Liners
Hole Liner
Maintain consistent alignment in mating parts by installing a pin in one part and a liner in the other. These components press into place for permanent installation.
Hole Liners—Inch
Shank | Shoulder | Tolerance | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Pin Head Dia. | ID | Dia. (C) | Ht. (D) | Dia. | Ht. | O'all Ht. | Shank Dia. | Shank Ht. | ID | Material | Hardness | Each | |
For Tapered-Head Pins | |||||||||||||
| 1/4" | 1/4" | 1/2" | 3/8" | 0.625" | 0.094" | 0.469" | -0.0003" to 0" | 0.0014" to 0.0017" | 0" to 0.0004" | Steel | Rockwell C60-C64 | 000000000 | 000000 |
| 5/16" | 5/16" | 1/2" | 3/8" | 0.625" | 0.094" | 0.469" | -0.0003" to 0" | 0.0014" to 0.0017" | 0" to 0.0004" | Steel | Rockwell C60-C64 | 000000000 | 00000 |
| 3/8" | 3/8" | 5/8" | 1/2" | 0.750" | 0.094" | 0.594" | -0.0003" to 0" | 0.0014" to 0.0017" | 0" to 0.0004" | Steel | Rockwell C60-C64 | 000000000 | 00000 |
| 1/2" | 1/2" | 3/4" | 5/8" | 0.875" | 0.094" | 0.719" | -0.0003" to 0" | 0.0015" to 0.0018" | 0" to 0.0004" | Steel | Rockwell C60-C64 | 000000000 | 00000 |
For Diamond- and Round-Head Pins | |||||||||||||
| 1/4" | 1/4" | 13/32" | 7/16" | 0.563" | 0.063" | 0.500" | -0.0003" to 0" | __ | 0.0001" to 0.0005" | Steel | Rockwell C50-C62 | 00000000 | 00000 |
| 5/16" | 5/16" | 1/2" | 7/16" | 0.625" | 0.063" | 0.500" | -0.0003" to 0" | __ | 0.0001" to 0.0005" | Steel | Rockwell C50-C62 | 00000000 | 00000 |
| 3/8" | 3/8" | 5/8" | 7/16" | 0.750" | 0.063" | 0.500" | -0.0003" to 0" | __ | 0.0001" to 0.0005" | Steel | Rockwell C50-C62 | 00000000 | 00000 |
| 1/2" | 1/2" | 3/4" | 1/2" | 0.875" | 0.063" | 0.562" | -0.0003" to 0" | __ | 0.0001" to 0.0005" | Steel | Rockwell C50-C62 | 00000000 | 00000 |
| 5/8" | 5/8" | 7/8" | 1/2" | 1.000" | 0.125" | 0.625" | -0.0003" to 0" | __ | 0.0002" to 0.0006" | Steel | Rockwell C50-C62 | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1/2" | 1.125" | 0.125" | 0.625" | -0.0003" to 0" | __ | 0.0002" to 0.0006" | Steel | Rockwell C50-C62 | 00000000 | 00000 |
| 1" | 1" | 1 3/8" | 11/16" | 1.500" | 0.125" | 0.812" | -0.0003" to 0" | __ | 0.0002" to 0.0006" | Steel | Rockwell C50-C62 | 00000000 | 00000 |
For Cone-Head Pins | |||||||||||||
| 7/16" | 3/8" | 1/2" | 1/4" | 0.750" | 0.250" | 0.500" | -0.0003" to 0" | -0.0625" to 0.0625" | -0.01" to 0" | Steel | Rockwell C60-C64 | 00000000 | 00000 |
| 11/16" | 5/8" | 3/4" | 3/8" | 1.000" | 0.375" | 0.750" | -0.0003" to 0" | -0.0625" to 0.0625" | -0.014" to -0.004" | Steel | Rockwell C60-C64 | 00000000 | 00000 |
Hole Liners—Metric
Shank | Shoulder | Tolerance | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Pin Head Dia., mm | ID, mm | Dia. (C), mm | Ht. (D), mm | Dia., mm | Ht., mm | O'all Ht., mm | Shank Dia., mm | Shank Ht., mm | ID, mm | Material | Hardness | Each | |
For Tapered-Head Pins | |||||||||||||
| 6 | 6 | 10 | 7 | 13 | 3 | 10 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 000000 |
| 8 | 8 | 12 | 7 | 15 | 3 | 10 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 00000 |
| 10 | 10 | 15 | 9 | 18 | 3 | 12 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 00000 |
| 12 | 12 | 18 | 12 | 22 | 3 | 15 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 00000 |
For Diamond- and Round-Head Pins | |||||||||||||
| 6 | 6 | 10 | 8 | 13 | 2 | 10 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 00000 |
| 8 | 8 | 12 | 8 | 15 | 2 | 10 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 00000 |
| 10 | 10 | 15 | 10 | 18 | 2 | 12 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 00000 |
| 12 | 12 | 18 | 10 | 22 | 2 | 12 | -0.00762 to 0 | -0.254 to 0.254 | 0 to 0.0102 | Steel | Rockwell C58-C62 | 0000000 | 00000 |