For quick repairs, these epoxies begin to harden in 6 minutes or less.

Even when used under water, these adhesives maintain their strength.

For invisible bond lines, these adhesives dry clear.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes.

Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Form bonds in 5 seconds or less.

Make strong, instant bonds on a variety of materials—but not your skin.

Form bonds without the strong odor of other instant-bond adhesives.

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

Form bonds without the strong odor of other instant-bond adhesives.

These thin liquids, also known as super glue, flow into small gaps.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.

For flexible bonds that resist cracking, these adhesives stay pliable.

Form strong bonds on most plastics.

Create strong, leakproof joints between unthreaded pipe and fittings.

Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.

Use these glue rolls with 3M dispensing guns.

Bonds reach full strength in 10 minutes.

This glue remains flexible after curing to accommodate joint movement.

Form bonds with twice the strength of our other spray adhesives.

Bond and repair nosing and stair treads with this thick, two-part epoxy.

Bond glass and stone to drywall, treated lumber, and subfloors.

Install building materials such as wood and drywall with these general purpose adhesives.

Improve instant-bond adhesive performance on hard-to-bond materials.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.

Specially formulated for plastics, these threadlockers secure nylon, PTFE, and other plastic threaded fasteners.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants don't degrade in sunlight.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These coatings require an ultraviolet curing lamp to reach full strength.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.