Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

Slide these caps over a tool handle or other round object and use the eye to hang it.

Made of FDA listed materials, these caps are suitable for food contact.

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Guard the corners of fragile materials such as glass and mirrors.

Slide these flexible vinyl caps on and they conform for a snug fit. Pull the tab for easy removal.

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.

Conceal and protect the tops of socket head or button head screws.

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

Push these plugs into an opening and friction holds them in place.

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

Protect internally threaded NPT connections from contaminants during fabrication and storage.

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Pull the two built-in rings to quickly remove these plugs. All are tapered to fit a range of hole diameters.

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Choose these metal fittings when you need better durability than our plastic push-to-connect fittings.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Designed for use in welding applications, these fittings are flame retardant.

Made of stainless steel, these couplings stand up to wet environments.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

Fittings can withstand temperatures up to 200° F.

Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 61 for use with drinking water.

These quick-disconnect couplings mate with a sanitary stainless steel quick-clamp fitting for use in dairy lines.

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. They have the chemical resistance to stand up to acids, solvents, and other harsh substances. Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are also known as Pressure Class 150 flanges.

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Flanges have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. They are reinforced with fiberglass layers for better strength and durability than any of our other pipe flanges for chemicals. Bolt two same-size flanges together with a gasket to create an access point within a line.

The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

Use these dust caps and plugs to keep contaminants out of your hose line.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, push the plug into the socket. The compact design makes these couplings sleeker and easier to handle than cam-and-groove garden hose couplings.

Couplings are compatible with quick-disconnect Plastic-shape plugs and sockets. They are designed for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 100 psi.

To keep contaminants out of your gas line, add these dust caps and plugs to natural and LP gas couplings when they’re not connected. All work with couplings that are rated ANSI Z21.41/CSA 6.9 for use with gas fuel appliances.

These nylon 6/6 cap nuts are chemical resistant, nonconductive, and lightweight.

The nylon cap covers and grips the threads to resist loosening.

Mount these drains at the bottom of your enclosure to let moisture drip out and keep electronics dry.

Rated NEMA 4X, these vents provide protection from washdowns, corrosion, and power jets of water.

These vents have louvers with foam filters to keep out dust and falling liquids.

Safe for use around hazardous gasses and dust, these vents maintain steady pressure and prevent moisture buildup from temperature changes inside enclosures.

Attach these vents to the top or side of sealed enclosures, so air can flow through to equalize internal and external temperature and pressure.

Instead of tossing Ethernet cords with a broken locking tab on their RJ45 plug, fix them with these clips.

Cover unused electrical outlets or plug prongs to protect them from dust, dirt, liquids, and other contaminants.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

Add grounding or surge suppression protection.

Insert these plugs deep within your pipe to seal it off from the inside.

For excellent corrosion resistance in wet conditions and harsh environments, these valves have no metal parts.

These grips are made of heavy duty vinyl for strength and durability.

Shaped to fit the contours of your hand, these ergonomic grips provide a comfortable, firm grasp.

Made of vinyl foam, these grips insulate and cushion vibration. They are grooved to conform to your fingers for a comfortable, secure grasp. Slide them onto a round tool handle and use the eye to hang them.

Grips are grooved to conform to your fingers for a comfortable, secure grasp.

Commonly used on toggle clamps, these grips have a flanged base to protect fingers and keep hands from slipping.

Add or replace worn grips on a variety of irregularly shaped handles and objects. Cut these grips to your desired length with scissors and slide them on your object. Use a heat gun to shrink them tightly in place.

These absorbent grips are made of polyurethane-coated nylon fabric for a secure, dry-feel hold even when hands are sweaty.

These drains have a removable collection trap that catches sediment and objects.

Often used to prevent spills from going down your drain, these plugs resist oil and most chemicals. They are nonabsorbent, washable, and reusable.

Wear these breathable hoods to keep cool while protecting against dirt and grime.

Also known as bouffants, these hats and hairnets keep hair contained to reduce contamination.

Add a layer of warmth to your hard hat.

Wear these fluorescent hats to stand out in low-visibility areas and high-risk jobsites, such as vehicle roadways and construction sites.

These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks.

Shield toes and feet from accidental impact.

Convert a baseball cap into a bump cap to protect your head from minor bumps and scrapes.

Protect the top of your head from falling objects.