For Use On For Use On |
|---|
Consistency Consistency |
|---|
|
Container Type Container Type |
|---|
 |  |
| Aerosol Can | Squeeze Bottle |
 |  |
| Tube | Jar |
 |  |
| Pail | Pen |
 | |
| Spray Bottle |
For Removing For Removing |
|---|
|
|
About Finishing
More
Light-Activated Surface Filler Pens for Plastic
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. Surface fillers work with most kinds of plastic, as well as wood, particleboard, and medium density fiberboard (MDF).
| Formulation | Container Size, oz. | Begins to Harden, sec. | Reaches Full Strength, sec. | Consistency | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
| Acrylic | 0.2 | 3 | 15 | Gel | Yes | 0° to 245° | Clear | Drill, Sand | Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PVDF Plastic, Vinyl Plastic, Fiberglass, Wood | 0000000 | 000000 |
Water-Resistant Surface Filler Kits
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
| Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, °F | Finishing Method | For Use On | Each | |
| 8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35° to 130° | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS Plastic, PVC Plastic, Fiberglass, Wood | 0000000 | 000000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Component | No. of Pieces | Mfr. Model No. | Size | Type | Lg. | Wd. | Each | |
| Two-Part Epoxy | 6 | 101-TS | 0.5 oz. | One-Time-Use Packet | __ | __ | 0000000 | 000000 |
| Resin | 1 | 105 | 1 qt. | Can | __ | __ | 0000000 | 00000 |
| Fast Hardener | 1 | 205 | 7 oz. | Can | __ | __ | 0000000 | 00000 |
| Slow Hardener | 1 | 206 | 7 oz. | Can | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 1.7 oz. | Canister | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 5.5 oz. | Canister | __ | __ | 0000000 | 00000 |
| Low-Density Filler | 1 | 410 | 5 oz. | Canister | __ | __ | 0000000 | 00000 |
| Mini Dispensing Pump | 3 | 300 | __ | __ | __ | __ | 0000000 | 00000 |
| Fiberglass Cloth | 1 | 745 | __ | __ | 30" | 30" | 0000000 | 00000 |
Plastic Welding Repair Kits
Weld stainless steel staple-like stakes into the surface of plastics to repair cracks.
| Input Voltage | Wattage, mW | Temperature Range, ° F | Cord Lg., ft. | Plug Type | Includes | Each | |
| 120V AC | 120 | 575° to 875° | 4 | NEMA 5-15 | Resistance Welder 100 M-Shaped Stakes for Tabs and Narrow Sections 100 S-Shaped Stakes for Flat Surfaces 100 V-Shaped Stakes for Inside Corners 100 W-Shaped Stakes for Outside Corners | 000000 | 0000000 |
Scratch Removers for Plastic
Remove scratches, haziness, and abrasions from plastic surfaces.
Fine scratch removers repair minor abrasions and haziness on all plastic surfaces. After restoring the surface, seal it with a coat of plastic polish.
Deep scratch removers repair heavy scratches and abrasions. The fine scratch remover is required for final finishing. Note: Not for use on coated plastics, polycarbonate, or eyeglass lenses.
Plastic Polish/Cleaners
Clean, shine, and protect plastics such as acrylic without scratching. These cleaners also repel dust and eliminate static.
Note: Not for use on plastics that have an anti-glare coating.
Container | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Type | Size, oz. | Composition | Harshness | For Use On | For Removing | 1-23 | 24-Up | |
Liquid | ||||||||
| Spray Bottle | 8 | Water Based | Moderate | Fiberglass, Plastic | Dirt | 0000000 | 00000 | 00000 |
Plastic Cleaners
Safe to use on all plastics, including acrylic, polycarbonate, and fiberglass, these cleaners remove dirt and other contaminants without streaking. They also protect against smudges and repel dust.
Mold Polish
Polish molds, dies, fixtures, and molded materials. This polish removes plate-out, oxidation, and stains.
Container | |||||||
|---|---|---|---|---|---|---|---|
| Type | Size | Composition | Harshness | For Use On | For Removing | Each | |
Paste | |||||||
| Tube | 3 oz. | Water Based | Moderate | Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel | Dirt, Grease/Oil, Tar, Wax | 00000000 | 00000 |
| Jar | 1 lbs. | Water Based | Moderate | Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel | Dirt, Grease/Oil, Tar, Wax | 00000000 | 00000 |
| Pail | 5 lbs. | Water Based | Moderate | Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel | Dirt, Grease/Oil, Tar, Wax | 00000000 | 00000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Type | Size | Composition | Harshness | For Use On | For Removing | Pkg. Qty. | Pkg. | |
Paste | ||||||||
| Tube | 3 oz. | Water Based | Moderate | Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel | Dirt, Grease/Oil, Tar, Wax | 12 | 000000000 | 0000000 |
Scratch-Removal Buffing Kits
Remove minor scratches, scuffs, cloudy surfaces, and hard water etching from glass or plastic. Microns and grit are approximate.
| No. of Pieces | Includes | Abrasive Material | For Finish | Each | |
For Use On Plastic | |||||
|---|---|---|---|---|---|
| 7 | One 9 Micron (900 Grit) Disc—3" Dia One 0.5 Micron (2500 Grit) Polishing Compound—1 oz. One 3" Dia. Foam Pad One 3" Dia. Felt Pad One Cushioned Backing Pad with 1/4" Dia. Shank One Hook-and-Loop Backing Pad with 1/4" Dia. Shank One Spray Protectant—1 oz. | Aluminum Oxide | Polished | 0000000 | 000000 |