These metric nuts resist oil, grease, and solvents (except mineral acids).

Fiberglass nuts are stronger than nylon 6/6 nuts. They resist acids, solvents, salt water, and oil.

PTFE nuts withstand temperatures up to 500° F. They resist oil, grease, detergents, and most mineral acids. They're the lowest friction plastic nuts we offer, so they thread on smoothly.

PVC nuts resist acids, alkalies, salt solutions, and alcohol.

Stronger than PTFE nuts and resistant to solvents, bases, and acids—including hydrochloric and nitric acid—these PVDF nuts are often used in chemical processing equipment.

Plastic nuts are chemical resistant, nonconductive, and lightweight.

A nylon insert keeps metric bolt threads from coming loose due to vibration, wear, and temperature swings. About 25% stronger than medium-strength steel locknuts, these nuts are made of high-strength, Class 10 steel.

Made from Grade 5 steel, these inch-sized locknuts are suitable for fastening most machinery and equipment.

Get a grip on metric bolts exposed to vibration, wear, and changes in temperature. These metric locknuts have a nylon insert that holds onto bolts without damaging their threads.

Choose these locknuts for their adherence to strict military standards for material and construction. They’re low-strength steel, so they should be used for fastening panels and other light duty fastening applications.

These metric locknuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel locknuts, these locknuts have excellent resistance to chemicals and salt water.

One-third the weight of steel, aluminum locknuts resist corrosion in wet environments.

Titanium locknuts have a high strength-to-weight ratio and are resistant to acids and salt water.

With a shorter hex height than standard DIN 985 locknuts, these nylon-insert locknuts meet international ISO 10511 dimensional standards and are easy to install in tight spaces.

These Grade 8 locknuts are about 25% stronger than medium-strength steel thin locknuts.

These locknuts have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

Use these locknuts for light duty fastening applications, such as securing access panels.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

These locknuts have a curved washer that acts as a spring for easy installation and mild vibration resistance. The smooth rim makes them less likely to scratch materials when tightened than locknuts with a tooth lock washer.

Fiberglass flange nuts are chemical resistant, nonconductive, and lightweight.

These metric nylon 6/6 cap nuts are chemical resistant, nonconductive, and lightweight.

The nylon cap covers and grips the threads to resist loosening.

Made from nylon 6/6, these metric wing nuts are chemical resistant, nonconductive, and lightweight.

These thumb nuts have an aluminum insert to withstand more torque than plastic thumb nuts during installation.

Unlike metal nuts, these metric carbon fiber square nuts won’t warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.

Once installed these rivet nuts have a large back flange that distributes the load across a broad area for a strong hold in plastic and composites.

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

These rounded head screws have a nut that clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers.

Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.

Protect components from electrical charges.

Secure the self-tapping female connection with a screw; the other end snaps snugly into a panel, yet can be released for repairs and upgrades.

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.

To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Use these nuts with plastic compression fittings to create a seal on plastic tubing. They're moisture-resistant acetal, so they won't absorb water and soften, even in high-humidity environments.

Use these nuts with high-temperature compression fittings for food and beverage to create a seal on plastic tubing.

Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.

Add push-in cable holder to this adapter to mount cable to DIN rail.

Bend cable around these holders and let tension keep the bundle in place. They are often used on wire harness boards.

Secure multiple cable bundles with a single holder.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Rated to 300° F, these connectors are an excellent choice for use in high-temperature applications such as HID lighting and electric heat.

Soft molding over the wings provides a comfortable grip.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

No wire stripping is required—these connectors will pierce the insulation.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

A plastic cover fully insulates these splices.

Sealed threads make these splices weather resistant.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Make watertight connections for underground applications.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.