A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Use at pressures up to 150 psi.

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Barbs grip onto tubing.

Silver ions in the material help inhibit the growth of bacteria, mold, fungi, and other odor-causing microbes.

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Fittings have good corrosion resistance.

Tube supports slip inside tubing to prevent the walls from collapsing.

Use these sleeves with brass compression nuts and fittings to create a seal on plastic and rubber tubing.

Tube supports slip inside tubing to prevent the walls from collapsing.

These compression tube fittings meet Department of Transportation FMVSS 571 safety standards for air brake lines.

Use these nuts with plastic compression fittings to create a seal on plastic tubing. They're moisture-resistant acetal, so they won't absorb water and soften, even in high-humidity environments.

Lighter in weight than their metal counterparts, these compression fittings are polypropylene.

Tube supports slip inside tubing to prevent the walls from collapsing.

Made of brass, these couplings are more durable than plastic couplings.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

Made of stainless steel, these couplings stand up to wet environments.

These brass couplings have good corrosion resistance.

Fittings withstand temperatures up to 220° F.

A smooth interior reduces friction and prevents product buildup, ensuring an unrestricted flow.

Made of PVDF (also known as Kynar), these fittings have excellent strength and can handle temperatures as high as 240° F or 270° F.

Tube supports slip inside tubing to prevent the walls from collapsing.

Tube supports slip inside tubing to prevent the walls from collapsing.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

These quick-disconnect couplings mate with a sanitary stainless steel quick-clamp fitting for use in dairy lines.

Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic.

Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.

Tube supports slip inside tubing to prevent the walls from collapsing.

Connect these fittings to tubing with a ring and a crimping tool (both sold separately). Safe to use with drinking water, these fittings meet the strict standards of NSF/ANSI 61.

Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 61 for use with drinking water.

Fittings have a barb that grips onto tubing. Use in applications up to 150 psi.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 150 psi.

Use with soft plastic tubing to prevent the tube from collapsing.

Connect stainless steel tubing on one end and plastic tubing on the other end.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

Made of nylon, these fittings are lighter in weight than metal barbed hose fittings.They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Compatible with Schrader-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are designed for coolant applications up to 200 psi. Also known as coolant-line mold couplings.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, push the plug into the socket. The compact design makes these couplings sleeker and easier to handle than cam-and-groove garden hose couplings.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

Couplings are compatible with quick-disconnect Plastic-shape plugs and sockets. They are designed for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 100 psi.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

Connect these fittings to UV-resistant PVC pipe. Designed for outdoor use, they contain an additive that protects against the damaging effects of ultraviolet light. Fittings are typically used in low-pressure residential and commercial plumbing and water supply applications up to 300 psi.

This Schedule 40 pipe is typically used in low-pressure residential and commercial plumbing and water supply applications. It can handle pressures up to 300 psi. Suitable for outdoor environments, it contains an additive that protects against the damaging effects of ultraviolet light. Connect to UV-resistant PVC pipe fittings.