The plastic grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. These sets contain an assortment of pliers with spring-assisted jaws that open automatically when you release the handles.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Cushion-grip pliers have plastic grips for comfort and spring-assisted jaws that open automatically when you release the handles.

Insulated grips protect against accidental contact with live electrical circuits. These assorted pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. They have ultra grips made of hard and soft materials for comfort and slip resistance.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free. Turn the screw to adjust the pressure and squeeze the handles to lock. Sets include two jaw styles: flat-jaw pliers designed to grip flat objects and curved-jaw pliers that provide a good grip on a variety of shapes.

Pliers with lever release open when you press the lever.

Pliers with quick release are easier to open with one hand than lever release—push the handles open with your fingers. They have a plastic grip for comfort.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions. Pliers have plastic grips for comfort.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. The V-shaped jaws have multiple points of contact for gripping round and irregular workpieces. Push and hold the button to adjust the jaws, and then release the button to lock them in place. These assorted tools provide the gripping power of a pipe wrench and the adjustability of pliers. They have plastic grips for comfort.

You don't have to move the pivot point on these assorted pliers—squeeze the handle and the jaws adjust to fit your workpiece. Curved-jaw pliers are good for gripping round stock, tubing, and pipe; V-jaw pliers have more points of contact for a better grip on round and irregular workpieces. All have plastic grips for comfort.

Smooth, consistent movement ensures precision. These assorted pliers have slip-resistant ultra grips that are shaped to fit comfortably in your hand and reduce strain in repetitive tasks. The grips are also static dissipative, draining static away from your application to prevent electrostatic discharge (ESD) that can damage sensitive equipment. Spring assisted jaws open automatically when you release the handles.

Install and remove rings inside a bore or around a shaft. Adjust the jaw to switch from internal to external retaining ring types.

Thumb Screw Jaw Adjustment—Remove the thumb screw, move the handle from one hole to the other, and retighten the screw.

T-Knob Jaw Adjustment—Give the T-knob a quarter turn, move the handle from one slot to the other, and retighten the knob.

Knob Adjustment—Turn the knob to convert.

The forged construction provides high strength for durability and long life.

Pliers for internal retaining rings are used to install and remove rings inside a bore.

Pliers for external retaining rings are used to install and remove rings around a shaft. They have spring-assisted jaws that open automatically when you release the handles.

Twist the handle to open and close the jaws. Use these tools to install and remove rings inside a bore or around a shaft. Change tips for a different size or angle using a 3/32" hex key (not included).

Working with large retaining rings is easier with a T-handle. Turn it to open and close the jaws. Use these tools to install and remove rings inside a bore or around a shaft. Change tips for a different size or angle using the included hex key.

Change tips to use a different size or angle. These tools have spring-assisted jaws that open automatically when you release the handles. They require a #1 Phillips screwdriver (not included) to change tips.

Pliers for internal retaining rings are used to install and remove rings inside a bore.

Pliers for external retaining rings are used to install and remove rings around a shaft.

The forged construction provides high strength for durability and long life. Use the included hex key to change tips for a different size or angle. These tools have spring-assisted jaws that open automatically when you release the handles. An adjustable handle stop prevents you from over-expanding or contracting retaining rings.

Pliers for internal retaining rings are used to install and remove rings inside a bore.

Pliers for external retaining rings are used to install and remove rings around a shaft.

The handle can be locked in place to hold rings open or closed for easier installation and removal. Change tips to use a different size or angle. For sets with one or three pairs of pliers, use the included hex key. Sets with two pliers require a #2 slotted screwdriver (not included).

Pliers for internal retaining rings are used to install and remove rings inside a bore.

Pliers for external retaining rings are used to install and remove rings around a shaft.

Pliers for internal and external retaining rings can be used on both types—switch from one to the other by flipping the switch.

Spring-assisted jaws open automatically when you release the handles.

Adjustable handle stop prevents you from over-expanding or contracting retaining rings.

Insulated handles protect against shock from accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet ASTM F1505. Install and remove multiple sizes of both internal and external retaining rings. Flip the switch to alternate between working inside a bore for internal retaining rings and around a shaft for external retaining rings. Change tips for a different size or angle; loosen the set screw using the included hex key. Pliers have an adjustable handle stop that prevents you from over-expanding or over-contracting retaining rings.

Also known as lock wire pliers. Wire meets ASTM A580 and MS20995C.

Automatic-Return Pliers—Grip wire with the jaws and then pull out the knob to twist.

Adjustable-Length Pliers—Use the included extension to get extra length. Thread wire through the tip and eyelets, bending the wire ends over to keep it in place. Pull out the knob to twist the wire.