The smooth stainless steel surface allows for easy cleaning. These flashlights have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. They cast a spot beam, where the center is brighter than the edges for long-distance illumination. Rated IP04, they withstand liquid splashed from all angles. All stainless steel flashlights were tested and rated to ANSI/NEMA FL 1 standards.

Flashlights with an adjustable beam change from a wide floodlight to a narrow spotlight with a slide focus for one-hand operation. They can operate on either the included rechargeable battery or on four standard AAA alkaline batteries. This flashlight cannot be sold to Canada due to local energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Always have a flashlight on hand—these attach to a key ring. All have a nonslip grip to ensure a secure hold. All keychain flashlights were tested and rated to ANSI/NEMA FL 1 standards.

Incandescent lights are the traditional lighting choice. Twist the head to change the beam from a wide floodlight to a narrow spotlight.

LED lights produce more light, are more efficient, and generate less heat than incandescent lights. They cast a flood beam, which is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface. They have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. They cast a flood beam, which is especially good for close-up tasks and inspection work. All are tested and rated to ANSI/NEMA FL 1 standards. Rated IP54, they protect against dust and liquid splashed from all angles. These penlights cannot be sold to the listed areas due to energy efficiency regulations.

Shine light into hard-to-reach spaces with these flexible-arm flashlights. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a flood beam that creates a uniform spread of light. This is especially good for close-up tasks and inspection work. Use the momentary light setting when you need light for brief periods—the light only turns on when the button is held down. Rated IP04, they withstand liquid splashed from all angles. Their body is knurled for a nonslip grip. All lights meet ANSI/Plato FL 1, so you'll know they meet performance standards for impact resistance, run time, and beam distance.

Plug in these flashlights and they’ll automatically light up when the power goes out. There’s no need to regularly replace the batteries—they recharge on the base when it’s plugged into an outlet. They have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. Good for close-up tasks and inspection work, these flashlights cast a flood beam to evenly distribute light. They have two modes: a flashlight on the top and a torchlight on the side.

Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket. They cast a spot beam with a bright center for long-distance illumination. These penlights are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A have a lockout setting so they don’t get turned on by accident.

Style B have a knurled grip that won’t slip out of your hand. If you need these penlights to work right away and can’t wait for a charge, they’ll run on two AAA disposable batteries, too.

All of these flashlights stand up to wet environments. They have a slip-resistant grip to ensure a secure hold.

IP04 flashlights withstand liquid splashed from all angles.

LED flashlights last longer, are more efficient, and generate less heat than krypton flashlights.

Spot beam flashlights have a bright center for long-distance illumination.Styles A-E were tested and rated to ANSI/NEMA FL 1 standards.

Style B operate like traditional flashlights, but also provide 360° illumination by sliding out the light head. Note: Battery life is significantly reduced when used at the high-beam setting.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re intrinsically safe, meaning they cannot ignite an explosion. They’re also rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Ideal for close-up tasks and inspection work, their flood beam creates an even spread of light. Use the momentary light setting when you need light for brief periods—the light only turns on when you hold down the button. All have a nonslip grip so you don’t drop them.

These penlights have been tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP04-rated penlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

IP07-rated penlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re intrinsically safe for a broader range of hazardous locations than IP04-rated penlights. Use them in areas with ignitable concentrations of combustible dust, fibers, and other particles.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Shine light into hard-to-reach spaces in extreme environments like oil refineries or chemical plants. These flashlights are intrinsically safe, so they won’t spark. They meet NEC standards to reduce the risk of explosions. Make sure they match the hazardous environmental rating of your facility—they’re rated NEC Class I, Division I Groups A, B, C, and D. They’re also rated IP04, so they’ll seal out humidity and liquid from all angles.

Shine them continuously or use the momentary light setting to shine the light only while holding down the button. You’ll keep a firm grip on these lights thanks to their knurled texture.

Flashlights that meet ANSI/Plato FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Safely light up work in explosion-prone areas. Rated NEC Class I, these flashlights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

IP67, IP07 and IP08 rated flashlights will still work after being temporarily submerged in water. IP67 rated lights are also sealed against dust.

Styles A-H are intrinsically safe. They cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Style A have a second LED on the body that aims a flood beam downward to light up your footsteps. This LED can double as a task light—just stand these flashlights on their end or hang them up. They’ll also stick to metal surfaces with a magnet on the bottom and on the clip.

Style E can also work as a laser pointer. You can use the laser and spot beam separately or at the same time.

Style F have a head that’s angled 12°, so you can hold them with your hand straight to limit arm fatigue. A switch locks them out, so you can’t accidentally turn them on.

Flashlights with a spot beam have a bright center for long-distance illumination.

Illuminate small spaces and mark locations with these reusable lightsticks.

Lightsticks with rechargeable batteries are best for lighting up small spaces. Press the button to turn them on and select the color of the beam. Charge them with a micro-USB cord (not included). They’ll glow red when charging and turn off when they’re done. To save battery, their lockout function keeps them from turning on by accident. Rated IP07, you can drop them in water and they’ll still work. These lightsticks have an S-hook for easy hanging.

Lightsticks with disposable batteries are the best choice for location marking because they’ll stay lit up for 50 hours, compared to the rechargeable option that lasts 8 hours. They produce electroluminescent light, which uses less power than LEDs but emits similar light. They have a loop for hanging, but you’ll need something to fix them in place.

360° lightsticks provide area-wide illumination. 180° lightsticks have higher light intensity than 360° lightsticks.

Make surface defects stand out—these flashlights have a UV light that illuminates fluorescent dyes, particles, and chemicals so you can identify cracks and pores on parts or find leaks in your system. These flashlights also have a white LED bulb that shines a focused, even beam for normal flashlight uses. The head bends up to 90° so you can direct light where you need to when holding them in tight spaces. A strong magnet on the opposite end lets you stick them onto magnetic surfaces for hands-free use.

Reveal leaks, cracks, and contaminants that you wouldn’t find with a typical flashlight. These flashlights use UV light to illuminate fluorescent dyes, particles, and other chemicals.

Spotlight fine details to find defects in parts or inspect dim machine interiors. You can turn the light on these magnifying glasses on and off as needed, such as when inspecting both reflective and non-reflective components on circuit boards.

Magnifying glasses with a plastic lens are lighter in weight than glass lenses, and they won’t shatter if you drop them. Magnifying glasses with a bifocal lens or built-in second lens let you switch back and forth between magnification levels without changing lenses.

Charge these lighters for repeated long-term use. Compared to standard refillable lighters, they save you the effort of handling fuel. And unlike disposable lighters, they don’t create waste.

Lighters with an LED flashlight are useful in power outages and other dark conditions. They have a power button to preserve battery life and prevent accidental ignition.

Energy efficiency requirements restrict sales to the listed jurisdictions/areas.