Appearance Appearance |
---|
|
Shape Shape |
---|
![]() | ![]() |
Sheet and Bar | Ball |
![]() | |
Wire |
System of Measurement System of Measurement |
---|
|
Temper Rating Temper Rating |
---|
|
Hardness Rating Hardness Rating |
---|
|
Yield Strength Yield Strength |
---|
|
Tolerance Rating Tolerance Rating |
---|
|
Modulus of Elasticity Modulus of Elasticity |
---|
|
Density Density |
---|
|
Thermal Conductivity Thermal Conductivity |
---|
|
Certificate Certificate |
---|
![]() | Material Certificate with Traceable Lot Number |
Diameter Diameter |
---|
|
|
|
Fabrication Fabrication |
---|
|
More
One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance | Mechanical Finish | Flatness Tolerance | 12" × 12" | 12" × 24" | 24" × 24" | |
0.032" | -0.005" to 0.005" | Polished | 0.125" | 00000000 | |||
0.04" | -0.005" to 0.005" | Polished | 0.125" | 00000000 | |||
0.05" | -0.005" to 0.005" | Polished | 0.125" | 00000000 | |||
0.062" | -0.007" to 0.007" | Polished | 0.125" | 00000000 | |||
0.08" | -0.007" to 0.007" | Polished | 0.125" | 00000000 | |||
0.125" | -0.01" to 0.01" | Polished | 0.125" | 00000000 | |||
0.187" | -0.01" to 0.01" | Polished | 0.125" | 00000000 |
Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance | Mechanical Finish | Flatness Tolerance | 12" × 12" | 12" × 24" | 24" × 24" | |
0.032" | -0.005" to 0.005" | Polished | 0.125" | 00000000 | |||
0.04" | -0.005" to 0.005" | Polished | 0.125" | 00000000 | |||
0.05" | -0.005" to 0.005" | Polished | 0.125" | 00000000 | |||
0.062" | -0.007" to 0.007" | Polished | 0.125" | 00000000 | |||
0.08" | -0.007" to 0.007" | Polished | 0.125" | 00000000 | |||
1/8" | -0.01" to 0.01" | Polished | 0.125" | 00000000 | |||
0.187" | -0.01" to 0.01" | Polished | 0.125" | 00000000 |
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance Range | Mechanical Finish | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
1/16" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 000000 |
3/32" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 00000 |
1/8" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 0000 |
5/32" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 00000 |
3/16" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 00000 |
7/32" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 00000 |
1/4" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 00000 |
5/16" | -0.001" to 0.001" | Tumbled | 50 | 0000000 | 00000 |
11/32" | -0.001" to 0.001" | Tumbled | 25 | 0000000 | 00000 |
3/8" | -0.001" to 0.001" | Tumbled | 25 | 0000000 | 00000 |
7/16" | -0.001" to 0.001" | Tumbled | 10 | 0000000 | 00000 |
1/2" | -0.001" to 0.001" | Tumbled | 10 | 0000000 | 00000 |
9/16" | -0.001" to 0.001" | Tumbled | 10 | 0000000 | 00000 |
5/8" | -0.001" to 0.001" | Tumbled | 10 | 0000000 | 00000 |
3/4" | -0.001" to 0.001" | Tumbled | 5 | 0000000 | 00000 |
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. 260 brass is sometimes called cartridge brass. This wire has a soft temper and stays in place when bent.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Dia. | Dia. Tolerance | Mechanical Finish | Lg., ft. | Each | |
1/4 lb. Spool | |||||
---|---|---|---|---|---|
Mirror-Like | |||||
0.02" | -0.008" to 0.008" | Polished | 210 | 0000000 | 00000 |
0.025" | -0.008" to 0.008" | Polished | 130 | 0000000 | 0000 |
0.032" | -0.008" to 0.008" | Polished | 83 | 0000000 | 0000 |
0.04" | -0.008" to 0.008" | Polished | 52 | 0000000 | 0000 |
0.051" | -0.008" to 0.008" | Polished | 32 | 0000000 | 0000 |
0.064" | -0.008" to 0.008" | Polished | 20 | 0000000 | 0000 |
1 lb. Spool | |||||
Mirror-Like | |||||
0.02" | -0.008" to 0.008" | Polished | 850 | 0000000 | 00000 |
0.025" | -0.008" to 0.008" | Polished | 535 | 0000000 | 00000 |
0.032" | -0.008" to 0.008" | Polished | 335 | 0000000 | 00000 |
0.04" | -0.008" to 0.008" | Polished | 210 | 0000000 | 00000 |
0.051" | -0.008" to 0.008" | Polished | 130 | 0000000 | 00000 |
0.064" | -0.008" to 0.008" | Polished | 83 | 0000000 | 00000 |
One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance Range | Mechanical Finish | Flatness Tolerance | Each | |
12" × 12" | |||||
---|---|---|---|---|---|
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
12" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
24" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance Range | Mechanical Finish | Flatness Tolerance | Each | |
12" × 12" | |||||
---|---|---|---|---|---|
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
12" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 00000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
24" × 24" | |||||
0.032" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.04" | -0.005" to 0.005" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.062" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.08" | -0.007" to 0.007" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.125" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.187" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |
0.25" | -0.01" to 0.01" | Polished | 1/2" per 24" | 0000000 | 000000 |