Polycarbonate Bolts | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Color

Fastener Head Type

Head Diameter

Drive Style

Countersink Angle

Maximum Temperature

Head Height

Flat Head Profile

Threading

Finish

Rounded Head Style

DFARS Specialty Metals

REACH

RoHS

Compliant with Exemptions

Thread Type

Metric

UNC

UNF

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

Minimum Temperature

Performance

Tip Type

Thread Direction

Thread Spacing

135 Products

Plastic Slotted Flat Head Screws

These plastic screws are lightweight, nonconductive, and naturally resistant to rust. Use them to attach panels and covers to electronics and automated equipment. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the head.

Clear Impact-Resistant Polycarbonate—Our most impact-resistant plastic flat head screws, these withstand bumps and vibration without cracking or breaking.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength	Temp. Range, ° F	Specs. Met	Color	Pkg. Qty.		Pkg.
Clear Impact-Resistant Polycarbonate







				2-56

				1/8"	82°	Standard	0.172"	0.051"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A350	000000


				3/16"	82°	Standard	0.172"	0.051"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A354	00000
				1/4"	82°	Standard	0.172"	0.051"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A358	00000
				3/8"	82°	Standard	0.172"	0.051"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A361	00000
				1/2"	82°	Standard	0.172"	0.051"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A364	00000




						4-40

						3/16"	82°	Standard	0.225"	0.067"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	50	93140A404	00000


						1/4"	82°	Standard	0.225"	0.067"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	50	93140A706	00000
						3/8"	82°	Standard	0.225"	0.067"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	50	93140A708	00000
						1/2"	82°	Standard	0.225"	0.067"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A709	00000




								6-32

								1/4"	82°	Standard	0.279"	0.083"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A744	00000


								3/8"	82°	Standard	0.279"	0.083"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A746	00000
								1/2"	82°	Standard	0.279"	0.083"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A748	00000




										8-32

										1/4"	82°	Standard	0.332"	0.100"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A766	00000


										3/8"	82°	Standard	0.332"	0.100"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A769	00000
										1/2"	82°	Standard	0.332"	0.100"	Fully Threaded	Not Rated	-40 to 210	—	Clear	10	93140A110	0000
										3/4"	82°	Standard	0.312"	0.100"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A521	00000




												10-24

												1/2"	82°	Standard	0.365"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A522	00000


												3/4"	82°	Standard	0.365"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A523	00000
												1"	82°	Standard	0.365"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A524	00000




												10-32

												1/4"	82°	Standard	0.385"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A773	00000


		3/8"	82°									Standard	0.385"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A775	00000
		1/2"	82°									Standard	0.385"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A778	00000
		5/8"	82°									Standard	0.385"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A781	00000
		3/4"	82°									Standard	0.385"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A784	00000
		1"	82°									Standard	0.385"	0.116"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	25	93140A787	00000




												1/4"-20

				1/2"								82°	Standard	0.507"	0.153"	Fully Threaded	Not Rated	-40 to 210	—	Clear	10	93140A120	0000


				5/8"	82°							Standard	0.507"	0.153"	Fully Threaded	Not Rated	-40 to 210	—	Clear	10	93140A130	0000
				3/4"	82°							Standard	0.507"	0.153"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A839	0000
				1"	82°							Standard	0.507"	0.153"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A846	0000
				1 1/4"	82°							Standard	0.507"	0.153"	Fully Threaded	Not Rated	-40 to 210	—	Clear	10	93140A140	0000
				1 1/2"	82°							Standard	0.507"	0.153"	Fully Threaded	Not Rated	-40 to 210	—	Clear	10	93140A150	00000
				2"	82°							Standard	0.48"	0.153"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A525	00000
				2 1/2"	82°							Standard	0.48"	0.153"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A526	00000




						3/8"-16

						1"	82°					Standard	0.725"	0.230"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	10	93140A527	00000


						1 1/2"	82°					Standard	0.725"	0.230"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	5	93140A528	0000
						2"	82°					Standard	0.725"	0.230"	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.3	Clear	5	93140A529	0000




								M3 × 0.5 mm

								5 mm	90°			Standard	6.30 mm	1.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A160	0000


								6 mm	90°			Standard	6.30 mm	1.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A170	0000
								8 mm	90°			Standard	6.30 mm	1.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A180	00000
								10 mm	90°			Standard	6.30 mm	1.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A190	00000
								12 mm	90°			Standard	6.30 mm	1.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A210	00000




										M4 × 0.7 mm

										6 mm	90°	Standard	9.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A220	00000


										8 mm	90°	Standard	9.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A230	00000
										10 mm	90°	Standard	9.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A240	00000
										12 mm	90°	Standard	9.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	25	93140A250	00000
16 mm										90°	Standard	9.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A260	0000




										M5 × 0.8 mm

										8 mm	90°	Standard	10.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A270	0000


										10 mm	90°	Standard	10.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A280	0000
										12 mm	90°	Standard	10.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A290	0000
										16 mm	90°	Standard	10.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A330	0000
										20 mm	90°	Standard	10.40 mm	2.70 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A340	0000




										M6 × 1 mm

										12 mm	90°	Standard	12.60 mm	3.30 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A360	0000


										16 mm	90°	Standard	12.60 mm	3.30 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A370	00000
										20 mm	90°	Standard	12.60 mm	3.30 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A380	00000
										25 mm	90°	Standard	12.60 mm	3.30 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	10	93140A390	00000
										30 mm	90°	Standard	12.60 mm	3.30 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	5	93140A410	0000




					M8 × 1.25 mm

					16 mm						90°	Standard	17.30 mm	4.60 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	5	93140A420	0000


					20 mm						90°	Standard	17.30 mm	4.60 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	5	93140A430	0000
					25 mm						90°	Standard	17.30 mm	4.60 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	5	93140A440	0000
					30 mm						90°	Standard	17.30 mm	4.60 mm	Fully Threaded	Not Rated	-40 to 210	ASME B18.6.7M	Clear	5	93140A450	0000

Plastic Pan Head Phillips Screws

Our most common plastic pan head screws, these are often used to attach panels and covers to electronics and automated equipment. They're lightweight and nonconductive. Pan heads have a moderate height and width profile, offering a middle ground between narrower button heads and wider truss heads. The Phillips drive easily aligns with drivers and withstands more torque than slotted drives, but drivers slip when you apply too much force.

Length is measured from under the head.

Clear Impact-Resistant Polycarbonate—Our most impact-resistant plastic rounded head screws. These absorb bumps and vibration without cracking or breaking.

			Head
	Lg.	Threading	Dia.	Ht.	Tensile Strength	Temp. Range, ° F	Specs. Met	Color	Pkg. Qty.		Pkg.
Clear Impact-Resistant Polycarbonate







				2-56

				1/8"	Fully Threaded	0.17"	0.063"	Not Rated	-40 to 210	—	Clear	25	93140A300	000000


				3/16"	Fully Threaded	0.17"	0.063"	Not Rated	-40 to 210	—	Clear	25	93140A305	00000
				1/4"	Fully Threaded	0.17"	0.063"	Not Rated	-40 to 210	—	Clear	25	93140A310	00000
				3/8"	Fully Threaded	0.17"	0.063"	Not Rated	-40 to 210	—	Clear	25	93140A315	00000
				1/2"	Fully Threaded	0.17"	0.063"	Not Rated	-40 to 210	—	Clear	25	93140A320	00000




						4-40

						3/16"	Fully Threaded	0.219"	0.08"	Not Rated	-40 to 210	—	Clear	50	93140A403	00000


						1/4"	Fully Threaded	0.219"	0.08"	Not Rated	-40 to 210	—	Clear	50	93140A106	00000
						3/8"	Fully Threaded	0.219"	0.08"	Not Rated	-40 to 210	—	Clear	50	93140A108	00000
						1/2"	Fully Threaded	0.219"	0.08"	Not Rated	-40 to 210	—	Clear	25	93140A109	00000
						3/4"	Fully Threaded	0.215"	0.075"	Not Rated	-60 to 210	—	Clear	25	93140A277	00000




								6-32

								1/4"	Fully Threaded	0.27"	0.097"	Not Rated	-40 to 210	—	Clear	25	93140A144	00000


								3/8"	Fully Threaded	0.27"	0.097"	Not Rated	-40 to 210	—	Clear	25	93140A146	00000
								1/2"	Fully Threaded	0.27"	0.097"	Not Rated	-40 to 210	—	Clear	25	93140A148	00000
								3/4"	Fully Threaded	0.263"	0.092"	Not Rated	-60 to 210	—	Clear	25	93140A381	00000
								1"	Fully Threaded	0.263"	0.092"	Not Rated	-60 to 210	—	Clear	25	93140A427	00000




										8-32

										1/4"	Fully Threaded	0.322"	0.115"	Not Rated	-40 to 210	—	Clear	25	93140A166	00000


										3/8"	Fully Threaded	0.322"	0.115"	Not Rated	-40 to 210	—	Clear	25	93140A169	00000
										1/2"	Fully Threaded	0.32"	0.11"	Not Rated	-60 to 210	—	Clear	25	93140A588	00000
										3/4"	Fully Threaded	0.32"	0.11"	Not Rated	-60 to 210	—	Clear	25	93140A614	00000
										1"	Fully Threaded	0.32"	0.11"	Not Rated	-60 to 210	—	Clear	25	93140A782	00000




												10-32

												1/4"	Fully Threaded	0.373"	0.133"	Not Rated	-40 to 210	—	Clear	25	93140A173	00000


3/8"												Fully Threaded	0.373"	0.133"	Not Rated	-40 to 210	—	Clear	25	93140A175	00000
1/2"	Fully Threaded											0.373"	0.133"	Not Rated	-40 to 210	—	Clear	25	93140A178	00000
5/8"	Fully Threaded											0.373"	0.133"	Not Rated	-40 to 210	—	Clear	25	93140A181	00000
3/4"	Fully Threaded											0.373"	0.133"	Not Rated	-40 to 210	—	Clear	25	93140A184	00000
1"	Fully Threaded											0.373"	0.133"	Not Rated	-40 to 210	—	Clear	25	93140A187	00000




		1/4"-20

		3/8"	Fully Threaded									0.485"	0.165"	Not Rated	-60 to 210	—	Clear	10	93140A794	00000


		1/2"	Fully Threaded									0.485"	0.165"	Not Rated	-60 to 210	—	Clear	10	93140A832	00000
		3/4"	Fully Threaded									0.505"	0.18"	Not Rated	-40 to 210	—	Clear	10	93140A239	0000
		1"	Fully Threaded									0.505"	0.18"	Not Rated	-40 to 210	—	Clear	10	93140A246	0000
		1 1/2"	Fully Threaded									0.485"	0.165"	Not Rated	-60 to 210	—	Clear	10	93140A952	00000




				M3 × 0.5 mm

				5 mm	Fully Threaded							6 mm	2.4 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A015	0000


				6 mm	Fully Threaded							6 mm	2.4 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A154	0000
				8 mm	Fully Threaded							6 mm	2.4 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A258	0000
				10 mm	Fully Threaded							6 mm	2.4 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A342	0000
				12 mm	Fully Threaded							6 mm	2.4 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A455	0000




						M4 × 0.7 mm

						6 mm	Fully Threaded					8 mm	3.1 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A474	0000


						8 mm	Fully Threaded					8 mm	3.1 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A496	0000
						10 mm	Fully Threaded					8 mm	3.1 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A513	0000
						12 mm	Fully Threaded					8 mm	3.1 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A552	0000
						16 mm	Fully Threaded					8 mm	3.1 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A586	00000




								M5 × 0.8 mm

								8 mm	Fully Threaded			10 mm	3.8 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A679	00000


								10 mm	Fully Threaded			10 mm	3.8 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A699	00000
								12 mm	Fully Threaded			10 mm	3.8 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A713	00000
								16 mm	Fully Threaded			10 mm	3.8 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A763	00000
								20 mm	Fully Threaded			10 mm	3.8 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A814	00000




										M6 × 1 mm

										10 mm	Fully Threaded	12 mm	4.6 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A816	00000


										12 mm	Fully Threaded	12 mm	4.6 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A855	00000
										16 mm	Fully Threaded	12 mm	4.6 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	10	93140A903	00000
										20 mm	Fully Threaded	12 mm	4.6 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	5	93140A918	0000
										25 mm	Fully Threaded	12 mm	4.6 mm	Not Rated	-50 to 300	DIN 7985, ISO 7045	Clear	5	93140A947	0000

Through-Panel-Mount Binding Posts

Before making a permanent connection, use these connectors to test a circuit. Also known as binding posts, they mount through panels to create a connection point.

All connectors are insulated to prevent contact with panels.

Single Hex-Head Post


Gold-Plated Brass Black	Gold-Plated Brass Red

Single banana jacks come in your choice of color.

Gold-Plated Brass—Gold-plated brass conducts the best.

For Use With	For Panel Thk.	Current per Circuit, amp	For Panel Cutout Dia.	No. of Panel Cutouts	Material	Installation	Color		Each
Banana Plugs, Bare Stranded Wire, Spade Terminals	0.06" to 0.22"	30	1/2"	1	Gold-Plated Brass	Wrench	Black	6937K62	000000
Banana Plugs, Bare Stranded Wire, Spade Terminals	0.06" to 0.22"	30	1/2"	1	Gold-Plated Brass	Wrench	Red	6937K61	00000

Single Fluted Post


Gold-Plated Brass Black	Gold-Plated Brass Red

Single banana jacks come in your choice of color.

Gold-Plated Brass—Gold-plated brass conducts the best.

For Use With	For Panel Thk.	Current per Circuit, amp	For Panel Cutout Dia.	No. of Panel Cutouts	Material	Installation	Color		Each
Banana Plugs, Bare Stranded Wire, Spade Terminals	0.06" to 0.21"	15	0.39"	1	Gold-Plated Brass	Hand Tighten	Black	6937K64	000000
Banana Plugs, Bare Stranded Wire, Spade Terminals	0.06" to 0.21"	15	0.39"	1	Gold-Plated Brass	Hand Tighten	Red	6937K63	00000

Double Hex-Head Post

Tin-Plated Brass—Tin-plated brass lasts the longest.

For Use With	For Panel Thk.	Current per Circuit, amp	For Panel Cutout Dia.	No. of Panel Cutouts	Material	Installation	Color	Mounting Base Color		Each
Banana Plugs, Bare Stranded Wire, Spade Terminals	0.06" to 0.28"	30	1/2"	2	Tin-Plated Brass	Wrench	Black, Red	Black	6937K71	000000

Double Fluted Post

Tin-Plated Brass—Tin-plated brass lasts the longest.

For Use With	For Panel Thk.	Current per Circuit, amp	For Panel Cutout Dia.	No. of Panel Cutouts	Material	Installation	Color	Mounting Base Color		Each
Banana Plugs, Bare Stranded Wire, Spade Terminals	0.06" to 0.28"	15	0.38"	2	Tin-Plated Brass	Hand Tighten	Black, Red	Black	6937K72	000000

Single Banana Jack


Yellow	Red	Orange	Gray	Black

Green	Blue	Purple	White	Brown

Single banana jacks come in your choice of color.

Tin-Plated Brass—Tin-plated brass lasts the longest.

Hand-Held AC Voltage Rating—Hand-held voltage ratings are the maximum tested voltage for applications where you hold a cord connected to the jack in your hands while testing.

Hands-Free AC Voltage Rating—Hands-free voltage ratings are the maximum voltage the jack is rated to withstand.

	AC Voltage Rating, V AC		DC Voltage Rating, V DC
For Use With	Hand-Held	Hands-Free	Hand-Held	Hands-Free	For Panel Thk.	Current per Circuit, amp	For Panel Cutout Dia.	No. of Panel Cutouts	Material	Installation	Choose a Color	Pkg. Qty.		Pkg.
Banana Plugs	30	2,500	60	2,500	0.06" to 0.37"	15	0.35"	1	Tin-Plated Brass	Hand Tighten	Black , Red	10	7124K41	000000
Banana Plugs	30	2,500	60	2,500	0.06" to 0.37"	15	0.35"	1	Tin-Plated Brass	Hand Tighten	Blue , Brown , Gray , Green , Orange , Purple , White , Yellow	10	7124K1	00000

Double Banana Jack


Black Mounting Base	Red Mounting Base

Double banana jacks come with one red jack and one black jack, and your choice of color for the mounting base.

Tin-Plated Brass—Tin-plated brass lasts the longest.

Hand-Held AC Voltage Rating—Hand-held voltage ratings are the maximum tested voltage for applications where you hold a cord connected to the jack in your hands while testing.

Hands-Free AC Voltage Rating—Hands-free voltage ratings are the maximum voltage the jack is rated to withstand.

	AC Voltage Rating, V AC		DC Voltage Rating, V DC
For Use With	Hand-Held	Hands-Free	Hand-Held	Hands-Free	For Panel Thk.	Current per Circuit, amp	For Panel Cutout Dia.	No. of Panel Cutouts	Material	Installation	Color	Mounting Base Color	Pkg. Qty.		Pkg.
Banana Plugs	30	2,500	60	2,500	0.06" to 0.37"	15	0.37"	2	Tin-Plated Brass	Hand Tighten	Black, Red	Black	1	7124K422	00000
Banana Plugs	30	2,500	60	2,500	0.06" to 0.37"	15	0.37"	2	Tin-Plated Brass	Hand Tighten	Black, Red	Red	1	7124K421	0000

Push/Pull Captive Panel Screws

Push the plunger to secure and pull to release for quick access. To install, press the grommet into a hole in the outer panel. Fasteners become a permanent part of the outer panel when installed, so they won't fall out. They meet UL 94 V-2 for flame retardance. Made from plastic, they're chemical resistant and lightweight. Length is measured from under the plunger head.

For Panel Thk.		For Panel Hole Dia.			Head		Material
Max. Outer	Total	Inner	Outer	Lg.	Dia.	Ht.	Plunger	Grommet	Temp., ° F	Flammability Rating	Color	Pkg. Qty.		Pkg.



	0.042"	0.056" to 0.153"	0.189"	0.18"	11/32"	0.25"	0.266"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A110	000000


	0.042"	0.059" to 0.148"	0.25"	0.238"	3/8"	0.313"	0.28"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A106	00000
	0.042"	0.059" to 0.148"	0.316"	0.294"	3/8"	0.375"	0.3"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A101	00000
	0.065"	0.079" to 0.176"	0.189"	0.18"	23/64"	0.25"	0.266"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A111	00000
	0.065"	0.084" to 0.173"	0.25"	0.238"	25/64"	0.313"	0.28"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A107	00000
	0.065"	0.084" to 0.173"	0.316"	0.294"	25/64"	0.375"	0.3"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A102	00000
	0.098"	0.112" to 0.209"	0.189"	0.18"	25/64"	0.25"	0.266"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A112	00000
	0.098"	0.118" to 0.207"	0.25"	0.238"	7/16"	0.313"	0.28"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A108	00000
	0.098"	0.118" to 0.207"	0.316"	0.294"	7/16"	0.375"	0.3"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A103	00000
	0.138"	0.152" to 0.249"	0.189"	0.18"	7/16"	0.25"	0.266"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A113	00000
	0.162"	0.182" to 0.271"	0.25"	0.238"	1/2"	0.313"	0.28"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A109	00000


	0.162"	0.182" to 0.271"	0.316"	0.294"	1/2"	0.375"	0.3"	Nylon	Polycarbonate	-20 to 185	UL 94 V-2	Black	10	93040A104	00000

Plastic Press-Fit Low-Profile Binding Barrels and Caps

Plastic binding barrels are chemical resistant, nonconductive, and lightweight. The barrel is unthreaded for quick assembly with a press or a hammer. The barrel and cap have a low-profile for a nearly flush finish with the material surface. Barrel length is measured from under the head. Barrels and caps are sold separately.

Barbed Caps

	Cap
	Lg.	Head Dia.	Head Ht.	Temp. Range, ° F	Color	Pkg. Qty.		Pkg.
Polycarbonate



		7/16"	7/16"	5/64"	20 to 120	Black	100	93120A190	00000

Threaded Caps

Threaded caps have a slotted head for removal with a screwdriver.

	Cap
	Lg.	Head Dia.	Head Ht.	Temp. Range, ° F	Color	Pkg. Qty.		Pkg.
Polycarbonate



		7/16"	7/16"	5/64"	20 to 120	Black	100	93120A195	00000