McMaster-Carr logo
    Filter by
    System of Measurement
    Washer Type
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Sold As
    Thread Type
    Hardness Rating
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    104 Products

    Plastic Washers

    Image of Product. Front orientation. Washers. Plastic Washers.
    All of these washers are lightweight, nonconductive, and naturally rust resistant. They are commonly used in electronics and automation applications to take the pressure off screws and nuts and protect mounting surfaces.
    Clear Impact-Resistant Polycarbonate—Withstand bumps and vibration without cracking or denting. These washers are also clear to be less noticeable in your assembly.
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    Min.
    Max.
    Specs. Met
    Color
    Pkg.
    Qty.
    Pkg.
    Clear Impact-Resistant Polycarbonate
    No. 0
    		0.078"0.188"0.016" to 0.025"Not Rated212ASME B18.21.1Clear2590940A21000000
    No. 2
    		0.090"0.250"0.027" to 0.037"Not Rated212—Clear10090940A00300000
    No. 4
    		0.115"0.250"0.027" to 0.037"Not Rated212—Clear10090940A00500000
    No. 4
    		0.125"0.312"0.029" to 0.033"-200270—Clear2590940A5250000
    No. 5
    		0.140"0.312"0.027" to 0.037"Not Rated212—Clear10090940A00700000
    No. 5
    		0.141"0.350"0.036" to 0.045"Not Rated212—Clear2590940A22000000
    No. 6
    		0.156"0.312"0.029" to 0.033"-200270ASME B18.22.1Clear5090940A52100000
    No. 6
    		0.156"0.375"0.036" to 0.065"-40300—Clear5090940A12200000
    No. 8
    		0.170"0.375"0.025" to 0.035"Not Rated212—Clear2590940A00900000
    No. 8
    		0.188"0.438"0.036" to 0.065"-40300—Clear2590940A1260000
    No. 10
    		0.194"0.375"0.025" to 0.035"Not Rated212—Clear2590940A01100000
    No. 10
    		0.219"0.500"0.036" to 0.044"-200270—Clear2590940A5270000
    No. 12
    		0.250"0.562"0.051" to 0.080"Not Rated212ASME B18.21.1Clear2590940A23000000
    1/4"
    		0.257"0.500"0.055" to 0.069"Not Rated212—Clear2590940A01300000
    1/4"
    		0.281"0.375"0.058" to 0.066"-200270ASME B18.22.1Clear2590940A5230000
    1/4"
    		0.281"0.625"0.058" to 0.066"-200270—Clear2590940A52800000
    5/16"
    		0.317"0.500"0.055" to 0.069"Not Rated212—Clear2590940A01500000
    5/16"
    		0.344"0.688"0.058" to 0.066"-200270—Clear2590940A52900000
    3/8"
    		0.380"0.625"0.055" to 0.069"Not Rated212—Clear2590940A01700000
    3/8"
    		0.406"0.734"0.058" to 0.066"-200270ASME B18.22.1Clear1090940A52400000
    3/8"
    		0.406"0.812"0.051" to 0.080"-40300—Clear2590940A13100000
    7/16"
    		0.469"1.250"0.051" to 0.080"Not Rated212—Clear1090940A24000000
    1/2"
    		0.505"0.750"0.055" to 0.069"Not Rated212—Clear2590940A01900000
    9/16"
    		0.594"1.469"0.074" to 0.121"Not Rated212—Clear590940A25000000
    5/8"
    		0.656"1.750"0.074" to 0.121"Not Rated212—Clear190940A2600000
    3/4"
    		0.812"2.000"0.108" to 0.160"Not Rated212—Clear190940A2700000
    7/8"
    		0.938"2.250"0.108" to 0.160"Not Rated212—Clear190940A2800000
    1"
    		1.062"2.500"0.108" to 0.160"Not Rated212—Clear190940A2900000
    M2
    		2.1 mm4.0 mm0.4 mm to 0.6 mmNot Rated212—Clear5090940A41100000
    M2
    		2.2 mm5.0 mm0.2 mm to 0.4 mmNot Rated220—Clear1090940A50500000
    M2.5
    		2.7 mm5.0 mm0.4 mm to 0.6 mmNot Rated200—Clear2590940A5020000
    M2.5
    		2.9 mm6.0 mm0.5 mm to 0.6 mmNot Rated220—Clear2590940A5010000
    M2.6
    		2.7 mm6.0 mm0.4 mm to 0.6 mmNot Rated212—Clear5090940A11600000
    M3
    		3.2 mm6.0 mm0.5 mm to 0.6 mmNot Rated220—Clear2590940A5030000
    M3
    		3.2 mm7.0 mm0.4 mm to 0.6 mmNot Rated220DIN 125Clear2590940A5060000
    M3
    		3.2 mm9.0 mm0.5 mm to 1.1 mmNot Rated212—Clear1090940A1110000
    M3
    		3.3 mm8.0 mm0.7 mm to 1.0 mmNot Rated212—Clear5090940A41200000
    M3
    		3.3 mm10.0 mm0.7 mm to 1.0 mmNot Rated212—Clear5090940A11700000
    M3.5
    		3.7 mm8.0 mm0.5 mm to 1.1 mmNot Rated212—Clear1090940A1120000
    M4
    		4.3 mm9.0 mm0.5 mm to 1.1 mmNot Rated212—Clear1090940A1130000
    M4
    		4.5 mm10.0 mm0.7 mm to 0.9 mmNot Rated212—Clear5090940A41300000
    M5
    		5.5 mm12.0 mm0.7 mm to 0.9 mmNot Rated212—Clear5090940A41400000
    M6
    		6.4 mm12.0 mm1.2 mm to 1.8 mmNot Rated212—Clear1090940A1140000
    M6
    		6.5 mm13.0 mm0.9 mm to 1.1 mmNot Rated212—Clear5090940A41500000
    M6
    		6.8 mm17.0 mm2.7 mm to 3.4 mmNot Rated220—Clear2590940A50400000
    M8
    		8.5 mm15.8 mm1.3 mm to 1.9 mmNot Rated212—Clear1090940A1150000
    M8
    		8.5 mm18.0 mm1.4 mm to 1.8 mmNot Rated212—Clear2590940A41600000
    M10
    		10.5 mm22.0 mm1.4 mm to 1.8 mmNot Rated212—Clear1090940A4170000
    M12
    		13.0 mm24.0 mm2.2 mm to 2.8 mmNot Rated212—Clear1090940A41800000
     

    Plastic Unthreaded Spacers

    Image of Product. Front orientation. Spacers. Plastic Unthreaded Spacers.
    Lightweight, nonconductive, and naturally rust resistant, these plastic spacers are commonly used for electronic and automation applications.
    Clear Impact-Resistant Polycarbonate—Our most impact-resistant plastic spacers, these withstand bumps and vibration without cracking or denting. They’re also clear, so they’re less noticeable in your assembly.
    Lg.
    For Screw
    Size
    ID
    Temp. Range,
    ° F
    Specs.
    Met
    Color
    Each
    Clear Impact-Resistant Polycarbonate
     
    3/8" OD
    1/4"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A11000000
    3/8"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A1200000
    1/2"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A1300000
    5/8"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A1400000
    3/4"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A1500000
    7/8"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A1600000
    1"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A17000000
    1 1/4"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A18000000
    1 1/2"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A19000000
    1 3/4"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A21000000
    2"No. 10
    		0.192"-40 to 250ASTM D3935Clear90147A22000000
     
    1/2" OD
    1/4"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A2300000
    3/8"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A2400000
    1/2"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A2500000
    5/8"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A2600000
    3/4"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A2700000
    7/8"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A2800000
    1"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A29000000
    1 1/4"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A31000000
    1 1/2"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A32000000
    1 3/4"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A33000000
    2"1/4"
    		0.252"-40 to 250ASTM D3935Clear90147A34000000
     
    3/4" OD
    1/4"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A3500000
    3/8"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A36000000
    1/2"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A37000000
    5/8"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A38000000
    3/4"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A39000000
    7/8"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A41000000
    1"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A42000000
    1 1/4"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A43000000
    1 1/2"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A44000000
    1 3/4"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A45000000
    2"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A46000000
    2 1/4"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A47000000
    2 1/2"3/8"
    		0.380"-40 to 250ASTM D3935Clear90147A48000000
     

    Snap-In Fabric Grommets

    Image of Product. Front orientation. Contains Annotated. Grommets. Snap-In Fabric Grommets.
    The only fabric grommets we sell that don’t need setting tools. Just snap the two parts into a pre-cut hole. The grommets add a protective plastic ring to the hole so rope and cable don’t tear your tarp, cover, or curtain. They grip securely enough for most jobs, but for a stronger hold in high-strain applications, choose our metal grommets instead.
    Polycarbonate—Unlike polypropylene grommets, these grommets keep their strength and impact resistance at sub-freezing temperatures.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    Color
    Temp., ° F
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Polycarbonate
    00.203"3/8"1 1/8"13/32"Black-150 to 250Yes1096135K4900000
     

    Hands-Free Static-Eliminating Blowguns

    Image of Product. Front orientation. Blowguns. Hands-Free Static-Eliminating Blowguns .
    Bend the stand's flexible arm to position the blowgun and it will stay in place. Step on the included foot pedal to activate airflow and static elimination. Good for electronics assembly and clean room applications, this blowgun requires a clean, dry air supply. It conforms to OSHA Compliant 29 CFR 1910.242 requirements for maximum air outlet pressure.
    Air Inlet
    Nozzle
    Lg.
    Air Consumption
    @ Pressure
    Volume
    (Sound)
    Static Neutralizing
    Distance
    Arm
    Lg.
    Max. Inlet
    Pressure, psi
    Pipe
    Size
    Thread
    Type
    Gender
    Nozzle Tip
    Material
    Grip
    Style
    Voltage,
    V AC
    Cord Lg.,
    ft.
    Specs. Met
    Certification
    Each
    Straight with Straight Nozzle
     
    Trigger Control
    7 7/8"7.4 ft³/min @ 100 psiNot Rated1" to 36"18"1001/4
    		NPT
    		FemaleNickelPlain1206OSHA Compliant 29 CFR 1910.242C-UL Listed, UL Listed
    		2212N11000000000
     
    Replacement Foot Switches
    Each
    Replacement Steel Foot Pedals2213N110000000

    Static-Eliminating Blowguns

    Image of Product. Front orientation. Blowguns. Static-Eliminating Blowguns .
    Eliminate static charges and guard against ESD (electrostatic discharge) in electronics assembly and clean room applications. This blowgun requires a clean, dry air supply. A filter at the nozzle tip ensures that the air is clean. Gun conforms to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure. Volume (dBA) is measured 3 ft. from the blowgun at 100 psi.
    Air Inlet
    Nozzle
    Lg.
    Air Consumption
    @ Pressure
    Volume (Sound),
    dBA
    Static Neutralizing
    Distance
    Removes Particle
    Size Down To, μm
    Max. Inlet
    Pressure, psi
    Pipe
    Size
    Thread
    Type
    Gender
    Nozzle Tip
    Material
    Grip
    Style
    Voltage,
    V AC
    Clean Room Std.
    Cord Lg.,
    ft.
    Specs. Met
    Features
    Each
    Straight with Straight Nozzle
     
    Lever Control
    7 7/8"7.4 ft³/min @ 100 psi974" to 10"0.011001/4
    		NPT
    		FemaleNickelPlain120Fed. Std. Class 1,000; ISO Class 6
    		6OSHA Compliant 29 CFR 1910.242Power and Ionization-Indicating LED34405K77000000000
     
    Accessories for Blowguns
    Replacement Filters34405K79 Pkg. of 2 0000000
    Replacement Blowguns with Cable34405K78 Each 000000
    Replacement Guards2210N11 Each 00000
    Replacement Hanger Brackets2211N11 Each 00000

    Push/Pull Captive Panel Screws

    Image of ProductInUse. Front orientation. Contains Annotated. Captive Panel Screws. Push/Pull Captive Panel Screws.
    Image of Product. Front orientation. Exploded view. Contains Annotated. Captive Panel Screws. Push/Pull Captive Panel Screws.
    Push the plunger to secure and pull to release for quick access. To install, press the grommet into a hole in the outer panel. Fasteners become a permanent part of the outer panel when installed, so they won't fall out. They meet UL 94 V-2 for flame retardance. Made from plastic, they're chemical resistant and lightweight. Length is measured from under the plunger head.
    For
    Panel Thk.
    For Panel
    Hole Dia.
    Head
    Material
    Max.
    Outer
    Total
    Inner
    Outer
    Lg.
    Dia.
    Ht.
    Plunger
    Grommet
    Temp.,
    ° F
    Flammability
    Rating
    Color
    Pkg.
    Qty.
    Pkg.
    0.042"0.056" to 0.153"0.189"0.18"11/32"0.25"0.266"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A110000000
    0.042"0.059" to 0.148"0.25"0.238"3/8"0.313"0.28"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10600000
    0.042"0.059" to 0.148"0.316"0.294"3/8"0.375"0.3"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10100000
    0.065"0.079" to 0.176"0.189"0.18"23/64"0.25"0.266"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A11100000
    0.065"0.084" to 0.173"0.25"0.238"25/64"0.313"0.28"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10700000
    0.065"0.084" to 0.173"0.316"0.294"25/64"0.375"0.3"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10200000
    0.098"0.112" to 0.209"0.189"0.18"25/64"0.25"0.266"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A11200000
    0.098"0.118" to 0.207"0.25"0.238"7/16"0.313"0.28"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10800000
    0.098"0.118" to 0.207"0.316"0.294"7/16"0.375"0.3"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10300000
    0.138"0.152" to 0.249"0.189"0.18"7/16"0.25"0.266"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A11300000
    0.162"0.182" to 0.271"0.25"0.238"1/2"0.313"0.28"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10900000
    0.162"0.182" to 0.271"0.316"0.294"1/2"0.375"0.3"Nylon
    		Polycarbonate
    		-20 to 185UL 94 V-2
    		Black1093040A10400000
     
    back to top