McMaster-Carr

Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.

Hardwire pumps must be wired to a plug (not included).

Style A

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—With Thermal Overload Protection
A	Plug	2.8	1.7	__	7	35° to 120°	1/125 hp	0.6	Screened	1/4	NPT	Male	6	3 5/8"	2 7/8"	3 1/2"	0000000	000000
A	Plug	5	4	2.2	12.2	35° to 120°	1/40 hp	0.8	Screened	1/4	NPT	Male	6	4 1/4"	2 7/8"	4 7/8"	0000000	000000

Style B

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—Without Thermal Overload Protection
B	Plug	3.5	1.7	__	7	35° to 85°	1/30 hp	0.5	Screened	1/4	NPT	Male	16	2 3/4"	3 1/2"	4 5/8"	0000000	000000
B	Plug	5.7	4.7	2	12	35° to 85°	1/15 hp	0.8	Screened	1/4	NPT	Male	16	4 7/8"	2 3/4"	4"	0000000	000000
B	Plug	9.2	7	3.5	13	35° to 85°	1/10 hp	1.2	Screened	1/2	NPT	Male	16	3"	4"	5"	0000000	000000

Style C

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—With Thermal Overload Protection
C	Plug	3.5	2.5	__	10.2	35° to 120°	1/150 hp	1.1	Screened	1/4	NPT	Male	6	4 5/8"	4 1/8"	4 1/8"	0000000	000000
C	Plug	5.4	4.5	2.2	12.3	35° to 120°	1/40 hp	1.7	Screened	1/4	NPT	Male	6	4 5/8"	5"	5"	0000000	000000
C	Plug	5.4	4.5	2.2	12.3	35° to 120°	1/40 hp	1.7	Screened	1/4	NPT	Male	18	4 5/8"	5"	5"	0000000	000000
240V AC, Single Phase—With Thermal Overload Protection
C	Hardwire	5.4	4.5	2.2	12.3	35° to 120°	1/40 hp	0.7	Screened	1/4	NPT	Male	12	4 5/8"	5"	5"	0000000	000000

Style D

		Max. Flow Rate, gpm								Discharge				Overall
	Electrical Connection Type	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Cord Length, ft.	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—With Thermal Overload Protection
D	Plug	7.9	6.6	3.4	13.4	35° to 120°	1/28 hp	1.4	Screened	3/8	NPT	Male	6	4"	4"	4 5/8"	0000000	0000000

Submersible/Open-Air Pumps for Water

These pumps can be submerged or connected remotely to a pipe in your line. Use them to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.

Max. Flow Rate, gpm						Intake			Discharge			Overall
@ 1 Ft. of Head	@ 5 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug
2.8	1.7	7	35° to 120°	1/125 hp	0.6	1/4 × 1/2	NPT × NPT	Female × Male	1/4	NPT	Male	3 3/8"	3 3/4"	2 3/4"	0000000	000000

Impact-Resistant Submersible Pumps for Water

The durable epoxy-coated aluminum housing handles hard knocks in rough waters. Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.

Hardwire pumps must be wired to a plug (not included).

	Max. Flow Rate, gpm								Discharge			Overall
	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug
A	2.8	1.7	__	7	35° to 120°	1/200 hp	1.1	Screened	1/4	NPT	Male	4 1/4"	4 1/8"	4 1/8"	0000000	000000
B	5	3.4	1.2	11.8	35° to 120°	1/40 hp	1.7	Screened	1/4	NPT	Male	4 3/4"	3 1/2"	5 1/2"	000000	000000
B	13.5	12.4	10.2	24.5	35° to 120°	1/12 hp	3.5	Screened	1/2	NPT	Male	5 1/2"	4 1/2"	7"	000000	000000
240V AC, Single Phase—With Thermal Overload Protection
Hardwire
A	3.4	2	__	7.4	35° to 120°	1/150 hp	0.4	Screened	1/4	NPT	Male	4 1/4"	4 1/8"	4 1/8"	0000000	000000
B	13.5	12.4	10.2	24.5	35° to 120°	1/12 hp	1.6	Screened	1/2	NPT	Male	5 1/2"	4 1/2"	7"	0000000	000000

Impact-Resistant Submersible/Open-Air Pumps for Water

Protected from impact by a durable epoxy-coated aluminum housing, these pumps can be submerged or connected remotely to a pipe in your line. Use to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.

Hardwire pumps must be wired to a plug (not included).

	Max. Flow Rate, gpm							Intake			Discharge			Overall
	@ 1 Ft. of Head	@ 5 Ft. of Head	@ 10 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.	Features		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug
A	3.4	2	__	7.4	35° to 120°	1/150 hp	1.1	1/4 × 1/2	NPT × NPT	Female × Male	1/4	NPT	Male	4 1/8"	4 1/8"	4 5/8"	__	0000000	000000
B	5	3.4	1.2	11.8	35° to 120°	1/40 hp	1.7	3/8	NPT	Female	1/4	NPT	Male	4 3/4"	3 1/2"	5 1/2"	Removable Intake Screen	000000	000000
B	8.3	5.6	3.5	17.3	35° to 120°	1/15 hp	3.2	1/2	NPT	Female	1/2	NPT	Male	5 1/2"	4 1/2"	7"	Removable Intake Screen	000000	000000
240V AC, Single Phase—With Thermal Overload Protection
Hardwire
B	5	3.4	1.2	11.8	35° to 120°	1/40 hp	0.7	3/8	NPT	Female	1/4	NPT	Male	4 3/4"	3 1/2"	5 1/2"	Removable Intake Screen	0000000	000000
B	10	8.6	6.9	21	35° to 120°	1/15 hp	1.4	1/2	NPT	Female	1/2	NPT	Male	5 1/2"	4 1/2"	7"	Removable Intake Screen	0000000	000000

Extended-Life Submersible/Open-Air Pumps for Water

These pumps can be submerged or connected remotely to a pipe in your line. Magnets turn the impeller so there's no shaft seal to wear out. Use to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry.

Tube Connection

	Max. Flow Rate, gpm								Intake		Discharge		Overall
Electrical Connection Type	@ 0 Ft. of Head	@ 1 Ft. of Head	@ 3 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Tube Connection Type	For Tube ID	Tube Connection Type	For Tube ID	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—Without Thermal Overload Protection
Plug	2.3	2	1.5	4.6	3"	35° to 160°	1/200 hp	0.5	Barbed	3/8"	Barbed	3/8"	3 1/4"	3 3/4"	4 1/2"	0000000	0000000
Plug	3	2.6	1.8	4.6	3"	35° to 160°	1/200 hp	0.5	Barbed	1/2"	Barbed	1/2"	3 1/4"	3 3/4"	4 1/2"	0000000	000000

Pipe Connection

	Max. Flow Rate, gpm								Intake			Discharge			Overall
Electrical Connection Type	@ 0 Ft. of Head	@ 1 Ft. of Head	@ 3 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—Without Thermal Overload Protection
Plug	3	2.6	1.8	4.6	3"	35° to 160°	1/200 hp	0.5	1/4	NPT	Male	1/4	NPT	Male	3 1/4"	3 3/4"	4 1/2"	0000000	0000000

Extended-Life Submersible Pumps for Water

Magnets turn the impeller so there's no shaft seal to wear out. Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry.

Max. Flow Rate, gpm									Discharge			Overall
@ 0 Ft. of Head	@ 1 Ft. of Head	@ 3 Ft. of Head	Max. Ft. of Head, ft.	Removes Water Down To	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—Without Thermal Overload Protection
Plug
3	2.6	1.8	4.6	3"	35° to 160°	1/200 hp	0.5	Screened	1/4	NPT	Male	3 1/4"	3 3/4"	3 7/8"	0000000	0000000

High-Head Submersible Pumps for Water

Also known as deep-well submersible pumps, use these pumps to transfer drinking water from wells and cisterns up to 25 ft. deep. They come with a control box that automatically disconnects from the system when the lid is opened, making servicing easier. Pumps are activated by a pressure switch and must be hardwired. Do not run dry.

							Discharge			Overall
Max. Flow Rate, gpm	Max. Ft. of Head, ft.	Removes Water Down To, ft.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Ht.	Specifications Met		Each
240V AC, Single Phase—With Thermal Overload Protection
Hardwire
14	280	25	55° to 120°	1 1/2 hp	11.5	Screened	1 1/4	NPT	Female	3 7/8"	31"	NSF/ANSI Standard 61 for Drinking Water, UL Listed	0000000	000000000
16	212	25	55° to 120°	1 hp	8	Screened	1 1/4	NPT	Female	3 7/8"	27"	NSF/ANSI Standard 61 for Drinking Water, UL Listed	0000000	00000000

Submersible Pumps for Salt Water

Circulate salt water in submerged and open-air applications. These pumps use magnets to turn the impellers so there is no shaft seal to wear out. They must be wired to a plug (not included) to activate. Do not run dry.

Max. Flow Rate, gpm						Intake			Discharge			Overall
@ 1 Ft. of Head	@ 5 Ft. of Head	Max. Ft. of Head, ft.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.		Each
120V AC, Single Phase—With Thermal Overload Protection
Hardwire
5	3.8	13	35° to 130°	1/50 hp	0.9	3/8 × 3/4	NPT × NPT	Female × Male	1/4	NPT	Male	4 1/8"	6 1/8"	4 7/8"	00000000	0000000
8.5	8	19	35° to 130°	1/20 hp	2	3/4	NPT	Female	1/2	NPT	Male	4 7/8"	7 3/8"	4 3/4"	00000000	000000

Ultra-Quiet Circulation Pumps for Water

Instead of a fan-cooled motor, these pumps have an integrated motor that's cooled by the liquid being pumped for virtually silent operation and a long service life. Also known as canned motor pumps, they're commonly used in chiller systems and aquariums. They can be mounted horizontally or vertically, but the motor must be below the impeller. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

							Intake			Discharge			Overall
Max. Flow Rate, gpm	Flow Rate @ 10 ft. of Head, gpm	Max. Ft. of Head, ft.	Max. Viscosity, cP	Temp. Range, °F	hp	Current, A	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Lg.	Wd.	Ht.		Each
120V AC, Single Phase—With Thermal Overload Protection
Hardwire
11	8	19	1	40° to 140°	Subfractional	0.57	3/4	Male	NPT	3/4	Male	NPT	6"	4 3/8"	4 7/8"	00000000	0000000
Plug
11	8	23	1	40° to 140°	Subfractional	0.52	3/4	Male	NPT	3/4	Male	NPT	6"	4 3/8"	4 7/8"	00000000	000000

Terms and Conditions and Privacy Policy