These air cleaners roll to where you need them.

Purify the air in spaces with light cleaning needs.

Bench-top cleaners are often used for small rooms or individual workstations. They require one filter (included).

Freestanding cleaners can be used in meeting spaces and large offices. They require three HEPA filters (included).

Replace the blower when it’s worn or damaged to keep air flowing through your powered respirator. Blowers suck in air and push it through a filter or cartridge to deliver clean air. They’re battery powered for portability, with a gauge telling you how much battery life is left. To keep you safe, a low-battery alarm will go off when it’s time to recharge the battery. A low-flow alarm sounds when you need to change your filter or cartridge.

NEC rated blowers prevent sparks that could ignite flammable or combustible particles in the air. Use them when working in environments where flammable and explosive vapors, gases, and fabrics may be present.

Choose a filter or cartridge (sold separately) to remove harmful particles from the air. Cartridges also remove gases and vapors.

Track the quality of incoming air as it travels from your air line to your respirator. These monitors display air-quality data, including carbon monoxide and water vapor levels, and sound an alarm if the air is unsafe to breathe. They also filter the air three times before it reaches you to remove oil, water, and solid particles.

Monitors with data-logging capabilities record air-quality data and calibration results onto a removable USB drive. Download your data from the USB for compliance reports and recordkeeping. They have a large color screen to easily view the quality and status of air as it flows through the filter. When it is time to calibrate the filter monitor, the screen gives clear, step-by-step instructions.

Calibration kits (sold separately) come with everything you need to test the accuracy of the filter monitor, including a regulator, tubing, and fittings. The components are packed in a carrying case. Air filter monitors should be calibrated monthly to ensure they’re working properly.

Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts. Unlike standard air cleaners, which create airflow strong enough to cool the print area and warp your parts, these low-airflow cleaners won’t disrupt your print. A three-part filtering process keeps you from breathing harmful emissions: a prefilter traps large particles, then a combination HEPA and activated carbon filter captures both fine particles and fumes. These CE marked cleaners meet health, safety, and environmental protection standards for products.

Attach the included hose and funnel to the cleaner to pull fumes directly from your printer. These compact, lightweight cleaners fit into most work areas, and are quiet enough for office use. The powder-coated steel housing holds up over a long service life.