Grip Type Grip Type |
---|
![]() | ![]() |
Multiposition | Pistol |
![]() | ![]() |
Straight | Angle |
Manufacturer Model Number Manufacturer Model Number |
---|
|
|
For Bit Shank Type For Bit Shank Type |
---|
![]() | Hex for Power Tools |
![]() | Hex |
Maximum Torque Maximum Torque |
---|
Maximum No-Load Speed Maximum No-Load Speed |
---|
|
Speed Control Speed Control |
---|
|
Specifications Met Specifications Met |
---|
|
Overall Length Overall Length |
---|
|
|
|
Battery Capacity Battery Capacity |
---|
|
Minimum Torque Minimum Torque |
---|
|
|
Container Type Container Type |
---|
|
Torque-Limiting Mechanism Torque-Limiting Mechanism |
---|
|
More
Rechargeable batteries keep these tools powered wherever you need them.
Multiposition-grip driver has a handle that pivots for a straight or pistol grip.
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Voltage | Batteries Included | Battery Charger Included | Manufacturer | Manufacturer Model No. | Each | |
Pistol Grip | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lithium Ion (Li-Ion) Battery | ||||||||||||
Variable | 500 | 150 | 1/4" | 7" | 2.3 | 12 | Yes | Yes | Milwaukee | 2401-22 | 0000000 | 0000000 |
Variable | 1,000 | Not Rated | 1/4" | 6 1/4" | 2.2 | 12 | Yes | Yes | DeWalt | DCF610S2 | 0000000 | 000000 |
Multiposition Grip | ||||||||||||
Lithium Ion (Li-Ion) Battery | ||||||||||||
2 | 200, 600 | 44 | 1/4" | 9 3/4" | 1.3 | 4 | Yes | Yes | Milwaukee | 2101-22 | 0000000 | 000000 |
Adjust the nosepiece to set the depth and prevent fasteners from being driven too deep. These drivers are good for use with soft materials such as wood, fiberboard, drywall, and insulation board. Rechargeable batteries keep them powered wherever you need them.
Depth-Limiting Cordless Screwdrivers | Batteries for DeWalt Cordless Tools | Chargers for DeWalt Cordless Tool Batteries | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Voltage | Batteries Included | Manufacturer | Manufacturer Model No. | Each | Each | Each | |||
Lithium Ion (Li-Ion) Battery | ||||||||||||||
Variable | 4,400 | 1/4" | 8 3/4" | 3.3 | 20 | Yes | DeWalt | DCF620D2 | 0000000 | 0000000 | 0000000 | 0000000 | 000000000 | 000000 |
An angled handle makes it easier to drive fasteners in tight spaces. These direct-drive tools start turning the bit as soon as the operator pulls the trigger. They provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Variable | 1,000 | 70 | 1/4" | 7 1/4" | 2.3 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Screwdrivers with positive clutch drive are the best choice for fastening applications where torque control is not critical. These tools require the operator to pull the trigger and apply pressure to the screw before the bit will turn. The clutch slips as soon as pressure is lifted or the maximum torque of the tool is reached.
Screwdrivers with direct drive start turning the bit as soon as the operator pulls the trigger. These tools provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Power Source | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Positive Clutch Drive | ||||||||||||||
Variable | 1,800 | 115 | 1/4" | 7 3/4" | 2.9 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Direct Drive | ||||||||||||||
Variable | 1,800 | 125 | 1/4" | 7" | 2.3 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 000000 |
The motor shuts off when the set torque is reached to prevent overtightening and damaging fasteners. These tools provide the most torque control of any electric screwdriver. They are designed for light- to medium-volume assembly.
Max. No-Load Speed, rpm | Torque Range, in.-lbs. | No. of Speeds | Drive Direction | For Bit Hex Shank Size | O'all Lg. | Wt., lbs. | Duty Cycle | On/Off Time | Surface Resistivity, ohms | Specifications Met | Each | |
Motor Stops Torque Limiter | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Push-to-Start Speed Control | ||||||||||||
1,200 | 11-26 | 1 | Clockwise and Counterclockwise | 1/4" | 11 1/4" | 1.6 | Intermittent | 0.5 Seconds On, 3.5 Seconds Off | 1010-1013 | UL Listed | 0000000 | 000000000 |
2,000 | 5-15 | 1 | Clockwise and Counterclockwise | 1/4" | 11 1/4" | 1.6 | Intermittent | 0.5 Seconds On, 3.5 Seconds Off | 1010-1013 | UL Listed | 0000000 | 00000000 |
Lever Speed Control | ||||||||||||
1,200 | 11-26 | 1 | Clockwise and Counterclockwise | 1/4" | 11 1/4" | 1.6 | Intermittent | 0.5 Seconds On, 3.5 Seconds Off | 1010-1013 | UL Listed | 0000000 | 00000000 |
2,000 | 5-15 | 1 | Clockwise and Counterclockwise | 1/4" | 11 1/4" | 1.6 | Intermittent | 0.5 Seconds On, 3.5 Seconds Off | 1010-1013 | UL Listed | 0000000 | 00000000 |
The clutch slips when the set torque is reached to prevent overtightening and damaging fasteners. To set torque, turn the adjustment collar.
No. of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | O'all Lg. | Wt., lbs. | Voltage | Current, A | Cord Lg., ft. | Specifications Met | Manufacturer and Model No. | Each | |
Clutch Slips Torque Limiter | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Variable | 1,200 | 140 | 1/4" | 12" | 3.6 | 120V AC | 6.5 | 8 | CSA Certified, UL Listed | DeWalt DW267 | 0000000 | 0000000 |
Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Torque Range, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Clutch Slips Torque Limiter | |||||||||||||
Trigger Speed Control | |||||||||||||
Variable | 800 | 25-75 | 1/4" | 9" | 3 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |
Variable | 900 | 13-70 | 1/4" | 9 1/2" | 2.9 | 90 | 17 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 25-44 | 1/4" | 8 1/4" | 2.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Push-to-Start Speed Control | |||||||||||||
1 | 1,000 | 1.5-30 | 1/4" | 8 3/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Lever Speed Control | |||||||||||||
Variable | 1,000 | 1.5-30 | 1/4" | 9 1/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 45-70 | 1/4" | 9 1/2" | 1.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Variable | 2,100 | 13-40 | 1/4" | 10" | 2.6 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. No-Load Speed, rpm | Torque Range, in.-lbs. | Number of Speeds | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Motor Stops Torque Limiter | |||||||||||||
Push-to-Start Speed Control | |||||||||||||
800 | 14.1-35.2 | 1 | 1/4" | 8 1/4" | 1.4 | 85 | 10.5 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000000 |
1,000 | 3.1-9.7 | 1 | 1/4" | 7 1/8" | 0.7 | 85 | 5.6 cfm @ 85 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 3.5-18.5 | 1 | 1/4" | 7 1/4" | 0.9 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Lever Speed Control | |||||||||||||
1,100 | 3.5-17.4 | 1 | 1/4" | 8 1/4" | 1.2 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 9.7-18.5 | 1 | 1/4" | 10 3/4" | 1.5 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
These tools deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material. Rechargeable batteries provide power wherever you need it.
Style F has a detachable right-angle head that can be replaced with a straight head attachment (sold separately) to convert it to a straight-line tool.
Manufacturer and Model No. | Voltage | Max. Torque, ft.-lbs. | Number of Speeds | Max. No-Load Speed | Overall Lg. | Weight, lbs. | Batteries Included | Battery Charger Included | Specifications Met | Includes | Container Type | Features | Each | ||
Pistol Grip | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lithium Ion (Li-Ion) Battery | |||||||||||||||
A | DeWalt DCF887D2 | 20V | 150 | 3 | 1,000 rpm, 2,800 rpm, 3,250 rpm | 5 5/16" | 2.8 | Yes | Yes | UL Listed | UL Listed Charger | Plastic Case | Built-In Light | 00000000 | 0000000 |
B | DeWalt DCF815S2 | 12V | 80 | Variable | 2,450 rpm | 6 1/4" | 2.3 | Yes | Yes | UL Listed | UL Listed Charger | Canvas Bag | Built-In Light | 00000000 | 000000 |
C | Milwaukee 2553-22 | 12V | 100 | Variable | 2,650 rpm | 6" | 2.2 | Yes | Yes | __ | __ | Plastic Case | Built-In Light | 00000000 | 000000 |
D | Milwaukee 2853-22 | 18V | 166.7 | Variable | 3,600 rpm | 4.6" | 3.8 | Yes | Yes | __ | __ | Plastic Case | Built-In Light | 00000000 | 000000 |
E | Makita XDT13T | 18V | 125 | Variable | 3,400 rpm | 5" | 3.3 | Yes | Yes | __ | UL Listed Charger | Plastic Case | Built-In Light | 00000000 | 000000 |
Straight Grip | |||||||||||||||
Lithium Ion (Li-Ion) Battery | |||||||||||||||
F | Makita XLT01 | 18V | 44 | Variable | 2,000 rpm | 15 1/4" | 3.9 | Yes | Yes | __ | UL Listed Charger | Canvas Bag | Built-In Light | 00000000 | 000000 |
Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed | Torque Range, in.-lbs. | Drive Direction | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Pistol Grip | ||||||||||||||
in.-lbs. | ||||||||||||||
Variable | 10,000 rpm | 120-840 | Clockwise and Counterclockwise | 1/4" | 6 5/16" | 2.1 | 90 psi | 2 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |