Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

With extended flaps to shield the entire switch, these covers protect rocker switches from moisture and dust.

A rubber seal protects these switches from splashing water.

Able to withstand high currents, these switches are often used with motors and pumps.

Built into a terminal block, these switches mount to DIN rail.

Protect toggle switches from moisture and dust by replacing panel mounting nuts with these rubber covers.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control the brightness of lights on the same circuit. They're also known as three-way switches.

These switches are housed in a protective enclosure so they can be mounted wherever needed.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Rated IP66, these switches are protected from washdowns.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.

Rated IP67, these connectors create a dust- and watertight seal where they fit into the housing of power supplies, appliances, and other electronic devices. Instead of hardwiring your devices, these connectors let you plug in a standard IEC power cord and turn the power on and off with a built-in switch.