Pozidriv® Screwdriver Bit Sets

Clear All

	For Drive Style For Drive Style	Show

	Pozidriv®

	For Drive Style For Drive Style	Hide


Phillips	Slotted	Hex

Torx	Square	Pozidriv®

Tamper- Resistant Torx	Drilled Spanner	Tamper- Resistant Hex

Clutch	External Hex	Torq- Set®

Tri-Wing®	Torx Plus	JIS

Tri- Groove	6-Flute Spline

	Driver Style Driver Style


Bit	Driver

	System of Measurement System of Measurement

Inch

Metric

in.-lbs.

	Size Size

	Number of Pieces Number of Pieces

100

	Tip Style Tip Style

	Standard

	Overall Length Overall Length

1"-1 1/4"

1 5/8"-6"

7 3/4"

	Shank Type Shank Type

	Hex
	Quick- Change Hex

	Hex Shank Size Hex Shank Size

1/4"

5/16"

	Maximum Torque Maximum Torque

36 in.-lbs.

4 Nm

	Minimum Torque Minimum Torque

2 in.-lbs.

0.2 Nm

	For Screw Size For Screw Size

	Container Type Container Type

Plastic Case

	Driver Type Driver Type

Torque

	Graduations Graduations

2 in.-lbs.

0.2 Nm

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Material Material

Steel

	Finish Finish

Diamond Coated

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Bit-Holding Mechanism Bit-Holding Mechanism

12 Products

About Torque Tools

Bit Assortments

These assortments contain general-purpose bits.

Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.

Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.


		Hex	Clutch	Tamper-Resistant Hex
		Phillips	Slotted	Torx	Square	Drilled Spanner
Pozidriv®	Tamper-Resistant Torx	Torq-Set®	Tri-Wing®	External Hex

1/4" Hex Shank Size—Steel
No. of Pieces	Components Included	Bits Included	Adapters Included	Drive Tools Included		Each
30	26 Bits 3 Adapters 1 Drive Tool	Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Tamper-Resistant Torx: T9, T10, T15, T20 T25, T27, T30, T40 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) Torq-Set®: No. 5, No. 8 (1" O'all Lg.) Pozidriv®: No. 2 (1" O'all Lg.) Drilled Spanner: No. 6, No. 8 No. 10 (1" O'all Lg.) Tri-Wing®: No. 4, No. 5 (1" O'all Lg.)	1/8" Male Square Drive × 1/8" Hex Shank Adapter 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools	8 3/4" Lg. Bit Screwdriver	000000	000000
39	36 Bits 2 Adapters 1 Drive Tool	Phillips: No. 1, No. 2 (1" O'all Lg.) Slotted: 1/4", 5/16" (1" O'all Lg.) Tamper-Resistant Hex: 5/64", 3/32", 7/64" 1/8", 9/64", 5/32" (1" O'all Lg.) Tamper-Resistant Torx: T8, T10, T15, T20 T25, T27, T30, T40 (1" O'all Lg.) Square: No. 1, No. 2, No. 3 (1" O'all Lg.) Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.) Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.) Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)	1/4" Female Square Drive × 1/4" Female Hex Adapter 2 1/4" Lg. Bit Adapter for Power Tools	Screwdriver Handle	0000000	00000
40	37 Bits 2 Adapters 1 Drive Tool	Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea. Slotted: 9/32" (1" O'all Lg.)—2 ea. Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea. Hex (Metric): 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15, T20, T25, T27 T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea. Clutch: 5/32" (1" O'all Lg.)—1 ea.	1 7/8" Lg. Bit Adapter for Power Tools 1/4" Male Square Drive × 1/4" Hex Shank Adapter	7 1/2" Lg. Bit Screwdriver	0000000	00000
100	96 Bits 4 Adapters	Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea.	1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools	__	000000	00000
1/4" Hex Shank Size for Power Tools—Steel
16	12 Bits 4 Adapters	Phillips: No. 1, No. 2 (6" O'all Lg.) Phillips: No. 2, No. 3 (3 1/2" O'all Lg.) Torx: T15, T20 (3 1/2" O'all Lg.) Torx: T20, T25, T27, T30 (6" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) External Hex: 5/16" (1 5/8" O'all Lg.)	1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 3" Lg. Bit Adapter for Power Tools 6" Lg. Bit Adapter for Power Tools	__	0000000	00000
34	29 Bits 5 Adapters	Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (3 1/2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (6" O'all Lg.) Torx: T8, T9, T10 (2" O'all Lg.) Torx: T15, T20, T25, T27, T30 (6" O'all Lg.) Torx: T15, T20, T25, T30 (3 1/2" O'all Lg.) Pozidriv®: No. 1, No. 2, No. 3 (2" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) Pozidriv®: No. 2 (6" O'all Lg.) External Hex: 3/8", 1/2" (1 3/4" O'all Lg.) External Hex: 5/16" (1 5/8" O'all Lg.)	1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 1/2" Male Square Drive × 1/4" Hex Shank Adapter 2 3/8" Lg. Bit Adapter for Power Tools	__	0000000	000000
1/4" and 5/16" Hex Shank Size—Steel
35	32 Bits 1 Extension 2 Drive Tools	Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.) Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8" 9/64", 7/32", 1/4" (1" O'all Lg.) Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.) Torx 1/4" Hex Shank: T10, T15, T20, T25, T27 T30 (1" O'all Lg.) Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.) Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.) Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32" 3/16" (1" O'all Lg.)	__	5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver 5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver	00000000	000000

High-Torque Bit Assortments

Phillips

Pozidriv®

Slotted

Less likely to crack or shatter under high torque than standard bits, these are often used to install machine screws with power tools. Also known as insert bits, they can be used in hand drivers or with a bit adapter in power tools.

For technical drawings and 3-D models, click on a part number.

1/4" Hex Shank Size
Number of Pieces	Components Included	Bits Included	Adapters Included	Material	Container Type		Each
7	6 Bits 1 Adapter	Phillips: No. 1, No. 2 (1" O'all Lg.) Slotted: 7/32", 1/4" (1" O'all Lg.) Pozidriv®: No. 1, No. 2 (1" O'all Lg.)	2" Lg. Bit Adapter for Power Tools	Diamond-Coated Steel	Plastic Case	00000000	000000

Bit Assortments for Impact Drivers

Phillips

Torx

Hex

Pozidriv®

The toughest bits available, these withstand the shock and twisting force of impact drivers. Also known as insert bits, use with a bit adapter in power tools.

1/4" Hex Shank Size
No. of Pieces	Components Included	Bits Included	Adapters Included	Bit-Holding Mechanism	Material	Container Type		Each
30	29 Bits 1 Adapter	Phillips: No. 1 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—3 ea. Phillips: No. 3 (1" O'all Lg.)—2 ea. Hex: 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15 (1" O'all Lg.)—1 ea. Torx: T20, T30, T40 (1" O'all Lg.)—2 ea. Torx: T25 (1" O'all Lg.)—3 ea. Pozidriv®: No. 2 (1" O'all Lg.)—3 ea. Pozidriv®: No. 1, No. 3 (1" O'all Lg.)—2 ea.	1/4" Female Hex × 1/4" Male Hex for Power Tools	Magnet, Retaining Ring	Diamond-Coated Steel	Plastic Case	0000000	0000000

Pozidriv® Bit Sets

Hex Shank

Hex Shank for Power Tools

Pozidriv®

Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.

1/4" Hex Shank Size
Components Included	Bits Included	Material		Each
15 Bits	Pozidriv®: No. 2 (1" O'all Lg.)—8 ea. Pozidriv®: No. 1 (1" O'all Lg.)—5 ea. Pozidriv®: No. 3 (1" O'all Lg.)—2 ea.	Steel	0000000	000000
1/4" Hex Shank Size for Power Tools
15 Bits	Pozidriv®: No. 2 (2" O'all Lg.)—8 ea. Pozidriv®: No. 1 (2" O'all Lg.)—5 ea. Pozidriv®: No. 3 (2" O'all Lg.)—2 ea.	Steel	00000000	00000

Torque Screwdriver and Bit Sets

These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

								Shaft
No. of Pieces	Includes	Torque Range	Graduations	For Bit Hex Shank Size	Torque-Limiting Direction	Clockwise Accuracy	O'all Lg.	Material	Handle	Certification		Each
Slip-Release Torque Limiter
in.-lbs., Nm
29	1 Adapter 1 Drive Tool 1 Extension 1/4” Square Drive Socket Adapter 26 Bits Screwdriver Bit Extension Torque-Limiting Screwdriver	2-36 in.-lbs. 0.2-4 Nm	2 in.-lbs. 0.2 Nm	1/4"	Clockwise	±6%	7 3/4"	Aluminum	Aluminum	Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration	0000000	0000000