Check the difference in air pressure between two inputs at the source using the dial indicator or remotely using a receiver. The dial indicator on these transmitters operates independently and shows differential pressure in real time for troubleshooting. Also known as transducers, these transmitters convert pressure to an electrical signal that is interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls. They are often used to indicate a filter is clogged or help you maintain a certain air pressure in ovens, dryers, and HVAC systems. All are CE marked, so they meet European safety standards.

When measuring pressure in ductwork, pair them with a static pressure probe.

For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the transmitter's differential pressure range and output signal. As differential pressure increases, the output signal from the transmitter will increase. Transmitters will only provide accurate readings within the rated pressure range. Connect them using two wires. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

For the Manufacturer User Manual, click on a part number and select Product Detail.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots. Use them to adjust and maintain the pressure of your compressed air. Install them in your air line after filters.

With a digital display and selectable differential pressure ranges, these transmitters are a versatile alternative to transmitters with dial indicators. Unlike a standard transmitter that has one wider differential pressure range, these transmitters have multiple ranges to choose from. The selectable pressure range means they are more accurate than standard transmitters since their accuracy applies to each small range rather than a single wide range. They can also be configured to output either current or voltage, while standard transmitters typically output one signal type. The digital display allows you to troubleshoot and monitor differential pressure at the source. Also known as transducers, they measure the difference in pressure between two inputs and convert it to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls. They are often used to indicate a filter is clogged or help you maintain a certain air pressure in ovens, dryers, and HVAC systems. All are rated UL 94 V-0, so they meet flammability standards. CE marked, they also meet European safety standards.

When measuring pressure in ductwork, pair them with a static pressure probe. Transmitters with an 8" pressure probe cable include a static pressure probe.

For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the transmitter's differential pressure range and output signal. As differential pressure increases, the output signal from the transmitter will increase. Transmitters will only provide accurate readings within the rated pressure range.

Connect them using two wires when using the current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices. For voltage output, connect them using three wires—two wires into the power supply and a separate wire to send a signal to the receiver. The receiver and the transmitter share a common ground wire back to the power supply.

For the Manufacturer User Manual, click on a part number and select Product Detail.

Mount these regulators to a 35 mm DIN rail with the included bracket. These regulators have an accuracy of ±0.2%. That makes them ideal for sensitive applications where consistent pressure is needed to generate precise force and movement. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install them in your air line after your filters.

To mount them on a wall, remove the DIN bracket and use the included wall-mounting bracket.

Used with pumps, cooling systems, and other liquid applications, these transmitters remotely measure the difference in pressure between two inputs. They are also known as transducers. These transmitters convert differential pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. You’ll often see them used to indicate a filter is clogged.

For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the transmitter's differential pressure range and output signal. Transmitters will only provide accurate readings within the rated pressure range. Connect them using two wires. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

For the Manufacturer User Manual, click on a part number and select Product Detail.

Deliver a large volume of air at a steady pressure for precise, repeatable movement in cylinders, actuators, and automated systems. No matter how irregular your compressed air supply pressure is, these precision regulators have a flexible diaphragm that automatically adjusts to input pressure changes and an aspirator tube that creates a feedback loop to maintain set pressure within a tight band.