1 Inch Wide Sanding Rolls

Filter by

Product Family

Sandpaper

Width

Grit

Form

For Use On

Length

Abrasive Backing Material

Material

Grit Rating

Abrasive Material

Performance

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

For Finish

Number of Pieces

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Particle Size

66 Products

Form

Screen

An open mesh design lets dust and debris escape so the abrasive won’t clog

10 products

Performance

Tear Resistant

Durable backing holds up to heavy sanding

49 products

Performance

Clog Resistant

Resist buildup of dust and debris

13 products

Water Resistant

Won't break down during wet sanding

26 products

Sanding Rolls

Trim off the length you need for general purpose sanding jobs big and small.

Cloth Abrasive Backing—Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

	Includes	Choose a Grit		30 ft. Long	48 ft. Long	75 ft. Long	150 ft. Long
Cloth Abrasive Backing







	For Rough Finish

	1"	Aluminum Oxide	Steel, Wood	Dispenser	36, 40, 50, 60, 80	4687A213	000000	—	000000	000000




			For Smooth Finish

			1"	Aluminum Oxide	Steel, Wood	Dispenser	100, 120, 150, 180, 220	4687A219	00000	—	00000	00000




					For Extra-Smooth Finish

					1"	Aluminum Oxide	Steel, Wood	Dispenser	240, 320, 400	4687A227	00000	—	00000	00000


					1"	Silicon Carbide	Steel, Wood	—	400	6810A11	—	0000000	—	—




							For Polished Finish

							1"	Aluminum Oxide	Steel, Wood	—	2400, 3000	6810A42	—	000000	—	—


							1"	Aluminum Oxide	Steel, Wood	Dispenser	600	4687A234	00000	—	00000	00000
							1"	Silicon Carbide	Steel, Wood	—	600, 800, 1200, 1400, 1600, 2000	6810A41	—	000000	—	—

Sanding Roll Assortments

Always have the right grit and length on hand with these assortments. The box doubles as a dispenser for the rolls—just trim off what you need.

Cloth Abrasive Backing—Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

						30 ft. Long		75 ft. Long
	Wd.	Abrasive Material	For Use On	Includes	No. of Pieces		Each		Each
Cloth Abrasive Backing



		1"	Aluminum Oxide	Steel, Wood	Dispenser One each 120, 180, 240-grit Rolls	3	4664A21	000000	4664A11	000000


		1"	Aluminum Oxide	Steel, Wood	Dispenser One each 80, 120, 180-grit Rolls	3	4664A24	00000	4664A14	00000
		1"	Aluminum Oxide	Steel, Wood	Dispenser One each 60, 80, 100-grit Rolls	3	4664A31	00000	4664A41	00000
		1"	Aluminum Oxide	Steel, Wood	Dispenser One each 60, 100, 120-grit Rolls	3	4664A33	00000	4664A43	00000
		1"	Aluminum Oxide	Steel, Wood	Dispenser One each 240, 320, 400-grit Rolls	3	4664A37	00000	4664A47	00000

Sanding Rolls for Stainless Steel and Hard Metals

A sharp abrasive cuts through tough metals such as stainless steel, titanium, and iron. Trim these rolls for the length you need.

Cloth Abrasive Backing—Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

					45 ft. Long		48 ft. Long
	Wd.	Abrasive Material	For Use On	Choose a Grit		Each		Each
Cloth Abrasive Backing







				For Rough Finish

				1"	Ceramic Alumina	Stainless Steel, Steel, Titanium, Iron, Nickel	36	8135N11	000000	———	0


				1"	Ceramic Alumina	Stainless Steel, Steel, Titanium, Iron, Nickel	60	8135N13	00000	———	0
				1"	Ceramic Alumina	Stainless Steel, Steel, Titanium, Iron, Nickel	80	8135N15	00000	———	0




						For Smooth Finish

						1"	Aluminum Oxide	Stainless Steel, Steel, Titanium, Iron, Nickel	220	———	0	6810A21	0000000


						1"	Ceramic Alumina	Stainless Steel, Steel, Titanium, Iron, Nickel	180	8135N17	00000	———	0




								For Extra-Smooth Finish

								1"	Aluminum Oxide	Stainless Steel, Steel, Titanium, Iron, Nickel	240, 280, 320	———	0	6810A361	000000


								1"	Silicon Carbide	Stainless Steel, Steel, Titanium, Iron, Nickel	320	8135N19	000000	———	0
								1"	Silicon Carbide	Stainless Steel, Steel, Titanium, Iron, Nickel	400	8135N121	000000	———	0




										For Polished Finish

										1"	Aluminum Oxide	Stainless Steel, Steel, Titanium, Iron, Nickel	2000, 2400	———	0	6810A44	000000


										1"	Silicon Carbide	Stainless Steel, Steel, Titanium, Iron, Nickel	500, 800, 1000, 1200, 1600	———	0	6810A43	000000
										1"	Silicon Carbide	Stainless Steel, Steel, Titanium, Iron, Nickel	600	8135N122	000000	———	0

Water-Resistant Sanding Rolls

Get the length you need for wet-sanding jobs big and small. The choice for wet environments, these rolls resist deterioration from water, grease, chemicals, cutting fluids, and other solvents.

Cloth Abrasive Backing

Image of Product. Front orientation. Sandpaper. Water-Resistant Sanding Rolls.

Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

	For Use On	Abrasive Material	Includes	Choose a Grit		30 ft. Long	75 ft. Long	150 ft. Long
For Rough Finish



	1"	Steel, Wood	Aluminum Oxide	Dispenser	50, 80	8225A83	000000	000000	000000


	For Smooth Finish



			1"	Steel, Wood	Aluminum Oxide	Dispenser	100, 120, 150, 180, 220	8225A89	00000	00000	00000


			For Extra-Smooth Finish



					1"	Steel, Wood	Aluminum Oxide	Dispenser	240, 320	8225A96	00000	00000	00000

Plastic Film Abrasive Backing

Thin but strong, film resists tearing. It also holds up to water, so it's good for wet sanding.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

Particle Size—Rolls with a particle size have micron-graded abrasive that produces a more uniform finish than standard sanding rolls.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

						150 ft. Long
	Wd.	For Use On	Abrasive Material	Particle Size, μm	Grit		Each
For Extra-Smooth Finish



		1"	Steel, Wood	Aluminum Oxide	50	240	8225A106	000000


		1"	Steel, Wood	Aluminum Oxide	40	280	8225A105	00000
		1"	Steel, Wood	Aluminum Oxide	30	320	8225A104	00000
		1"	Steel, Wood	Aluminum Oxide	20	400	8225A103	00000


		For Polished Finish



				1"	Steel, Wood	Aluminum Oxide	15	600	8225A102	00000


				1"	Steel, Wood	Aluminum Oxide	9	1000	8225A101	00000

Plastic Film With Double-Sided Abrasive

Thin but strong, film resists tearing. It also holds up to water, so it's good for wet sanding.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

					25 ft. Long
	Wd.	For Use On	Abrasive Material	Grit		Each
For Smooth Finish and Extra-Smooth Finish



		1"	Steel, Wood	Aluminum Oxide	150, 240	8225A116	000000

Clog- and Water-Resistant Sanding Rolls for Soft Metals, Plastic, and Rubber

Cut to length for wet or dry sanding without soft materials building up on the abrasive. These rolls have an open mesh design that lets dust and debris escape so they don’t clog. The waterproof backing resists breakdown from water, grease, chemicals, cutting fluids, and other solvents. Screens have abrasive on both sides for twice the life of standard sandpaper.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

					75 ft. Long
	Wd.	Abrasive Material	For Use On	Grit		Each
Cloth Mesh Abrasive Backing







				For Rough Finish

				1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	60	8230A111	000000


				1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	80	8230A27	00000




						For Smooth Finish

						1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	100	8230A26	00000


						1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	120	8230A25	00000
						1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	150	8230A24	00000
						1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	180	8230A23	00000
						1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	220	8230A22	00000




								For Extra-Smooth Finish

								1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	320	8230A21	00000


								1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	400	8230A61	00000

Emery Sanding Rolls

Trim to length for metalworking jobs such as rust removal, deburring, and surface prep. Emery cuts slowly for more control than other abrasives, so it’s also gentle enough for detail sanding.

Cloth Abrasive Backing—Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

					60 ft. Long		150 ft. Long
	Wd.	Abrasive Material	For Use On	Grit		Each		Each
Cloth Abrasive Backing







				For Rough Finish

				1"	Emery	Steel, Titanium, Cast Iron, Chrome, Cobalt	80	8238A311	000000	8238A551	000000




						For Smooth Finish

						1"	Emery	Steel, Titanium, Cast Iron, Chrome, Cobalt	100	8238A521	0000	8238A561	00000


						1"	Emery	Steel, Titanium, Cast Iron, Chrome, Cobalt	150	8238A532	0000	8238A571	00000

Clog- and Water-Resistant Sanding Roll Assortments for Soft Metals, Plastic, and Rubber

Stock cut-to-size rolls in a range of grits for sanding soft materials without buildup. These rolls have an open mesh design that lets dust and debris escape so they don’t clog. Their waterproof backing resists deterioration from water, grease, chemicals, cutting fluids, and other solvents. Screens have abrasive on both sides for twice the life of standard sandpaper. The box doubles as a convenient dispenser—just trim off what you need.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

	Lg., ft.	Abrasive Material	For Use On	Includes	No. of Pieces		Each
Cloth Mesh Abrasive Backing



	1"	30	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Dispenser One each 80, 120, 180-grit Rolls	3	4704A19	000000

Water-Resistant Sanding Roll Assortments

Tackle a variety of wet-sanding jobs with these easy-to-dispense assortments. They contain a range of grits for everything from bulk stock removal to surface prep. Rolls hold up to water, grease, chemicals, cutting fluids, and other solvents. The box doubles as a dispenser—just trim off what you need.

Cloth Abrasive Backing—Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

	Lg., ft.	Abrasive Material	For Use On	Includes	No. of Pieces		Each
Cloth Abrasive Backing



	1"	30	Aluminum Oxide	Steel, Wood	Dispenser One each 180, 240, 320-grit Rolls	3	4725A21	000000


	1"	30	Aluminum Oxide	Steel, Wood	Dispenser One each 80, 120, 150-grit Rolls	3	4725A22	00000

Clog-Resistant Sanding Rolls

A coating keeps these rolls cool and clear of material buildup that can dull the abrasive. Trim them to the length you need.

Cloth Abrasive Backing—Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer is a good choice for most sanding jobs.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

					30 ft. Long
	Wd.	Abrasive Material	For Use On	Choose a Grit		Each
Cloth Abrasive Backing







				For Rough Finish

				1"	Aluminum Oxide	Steel, Wood	80	6668N11	000000




						For Smooth Finish

						1"	Aluminum Oxide	Steel, Wood	100, 120, 150, 180, 220, 230	6668N111	00000




								For Extra-Smooth Finish

								1"	Aluminum Oxide	Steel, Wood	260, 320, 360	6668N113	00000

Water-Resistant Sanding Rolls for Soft Metals, Plastic, and Rubber

Avoid clogging when wet sanding soft materials with these cut-to-length rolls. Their extra-sharp abrasive reduces heat that can cause material to build up. Rolls hold up to water, grease, chemicals, cutting fluids, and other solvents.

Synthetic Paper Abrasive Backing—Waterproof to resist deterioration and curling when used for wet sanding.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Grit—The lower the grit number, the rougher the finish. The higher the grit number, the finer the finish.

					75 ft. Long
	Wd.	Abrasive Material	For Use On	Choose a Grit		Each
Synthetic Paper Abrasive Backing







				For Smooth Finish

				1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	180	47415A101	000000




						For Extra-Smooth Finish

						1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	240, 320, 400	47415A201	00000




								For Polished Finish

								1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	600	47415A105	00000


								1"	Silicon Carbide	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	1000, 1200	47415A202	00000

Crocus Sanding Rolls

Restore shine to metal with these cut-to-length rolls. Also known as crocus cloth, they have a soft abrasive similar to 1500–2000 grit sandpaper to create a shiny finish. Often the final step in a sanding process, they’re good for fine hand-polishing of engine valves, shafts, and other metal surfaces.

Cloth Abrasive Backing—Flexible and tear resistant, it's good for contoured or rounded surfaces where a rigid backing could crack or rip.

				30 ft. Long		60 ft. Long		150 ft. Long
	Wd.	Abrasive Material	For Use On		Each		Each		Each
Cloth Abrasive Backing







				For Polished Finish

				1"	Crocus	Steel, Wood	8238A71	000000	8238A54	000000	8238A58	000000