McMaster-Carr logo
    Filter by
    Countersink Angle
    Industrial Info Snippet
    Attribute Image
    System of Measurement
    Fastener Head Type
    Flat Head Profile
    Industrial Info Compare
    Thread Type
    Industrial Info Compare
    DFARS Specialty Metals
    Industrial Info Compare
    Thread Spacing
    Industrial Info Compare
    Tip Type
    Thread Direction
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    619 Products

    Stainless Steel Hex-Drive Flat Head Screws

    Image of Product. Front orientation. Flat Head Screws. Stainless Steel Hex-Drive Flat Head Screws.
    The most corrosion-resistant hex-drive flat head screws we offer. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals, but they're not as strong as alloy steel. With six contact points, the hex drive withstands more torque than slotted and Phillips to securely grip your driver without slipping and stripping the drive.
    Length is measured from the top of the head.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Super-Corrosion-Resistant Black-Oxide 316 Stainless Steel—Combines a finished appearance with the rust resistance of 316 stainless steel. Even if the coating wears off, these screws will hold up in just about any environment, including salt water and most chemicals.
    Undercut—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.
    Head
    Lg.
    Countersink
    Angle
    Flat Head
    Profile
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    4-40
    3/16"100°
    Undercut
    0.255"0.059"Partially Threaded70,000100000000000000
    1/4"100°
    Undercut
    0.255"0.059"Partially Threaded70,00010000000000000
    5/16"100°
    Undercut
    0.255"0.059"Partially Threaded70,00010000000000000
    3/8"100°
    Undercut
    0.255"0.059"Partially Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.255"0.059"Partially Threaded70,00010000000000000
     
    6-32
    1/4"100°
    Undercut
    0.307"0.066"Partially Threaded70,00010000000000000
    5/16"100°
    Undercut
    0.307"0.066"Partially Threaded70,00010000000000000
    3/8"100°
    Undercut
    0.307"0.066"Partially Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.307"0.066"Partially Threaded70,00010000000000000
    5/8"100°
    Undercut
    0.307"0.066"Partially Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.307"0.066"Partially Threaded70,00010000000000000
    1"100°
    Undercut
    0.307"0.066"Partially Threaded70,00010000000000000
     
    8-32
    1/4"100°
    Undercut
    0.359"0.076"Partially Threaded70,00010000000000000
    5/16"100°
    Undercut
    0.359"0.076"Partially Threaded70,00010000000000000
    3/8"100°
    Undercut
    0.359"0.076"Partially Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.359"0.076"Partially Threaded70,00010000000000000
    5/8"100°
    Undercut
    0.359"0.076"Partially Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.359"0.076"Partially Threaded70,00010000000000000
    1"100°
    Undercut
    0.359"0.076"Partially Threaded70,00010000000000000
     
    10-24
    3/8"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    5/8"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    1"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
     
    10-32
    3/8"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    5/8"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    1"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
    1 1/2"100°
    Undercut
    0.411"0.084"Partially Threaded70,00010000000000000
     
    1/4"-20
    3/8"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    5/8"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    7/8"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    1"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    1 1/4"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    1 1/2"100°
    Undercut
    0.531"0.105"Partially Threaded70,00010000000000000
    1 3/4"100°
    Undercut
    0.531"0.105"Partially Threaded70,000100000000000000
    2"100°
    Undercut
    0.531"0.105"Partially Threaded70,000100000000000000
     
    5/16"-18
    5/8"100°
    Undercut
    0.656"0.127"Partially Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.656"0.127"Partially Threaded70,00010000000000000
    1"100°
    Undercut
    0.656"0.127"Partially Threaded70,00010000000000000
    1 1/4"100°
    Undercut
    0.656"0.127"Partially Threaded70,00010000000000000
    1 1/2"100°
    Undercut
    0.656"0.127"Partially Threaded70,00010000000000000
    1 3/4"100°
    Undercut
    0.656"0.127"Partially Threaded70,000100000000000000
    2"100°
    Undercut
    0.656"0.127"Partially Threaded70,000100000000000000
     
    3/8"-16
    3/4"100°
    Undercut
    0.781"0.157"Partially Threaded70,00010000000000000
    1"100°
    Undercut
    0.781"0.157"Partially Threaded70,00010000000000000
    1 1/4"100°
    Undercut
    0.781"0.157"Partially Threaded70,00010000000000000
    1 1/2"100°
    Undercut
    0.781"0.157"Partially Threaded70,000100000000000000
    1 3/4"100°
    Undercut
    0.781"0.157"Partially Threaded70,000100000000000000
    2"100°
    Undercut
    0.781"0.157"Partially Threaded70,000100000000000000
    2 1/2"100°
    Undercut
    0.781"0.157"Partially Threaded70,000100000000000000
    3"100°
    Undercut
    0.781"0.157"Partially Threaded70,000100000000000000
     
    1/2"-13
    1"100°
    Undercut
    0.937"0.181"Partially Threaded70,00010000000000000
    1 1/4"100°
    Undercut
    0.937"0.181"Partially Threaded70,000100000000000000
    1 1/2"100°
    Undercut
    0.937"0.181"Partially Threaded70,000100000000000000
    2"100°
    Undercut
    0.937"0.181"Partially Threaded70,000100000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
     
    4-40
    3/16"100°
    Undercut
    0.255"0.059"Fully Threaded70,000500000000000000
    1/4"100°
    Undercut
    0.255"0.059"Fully Threaded70,000500000000000000
    5/16"100°
    Undercut
    0.255"0.059"Fully Threaded70,000500000000000000
    3/8"100°
    Undercut
    0.255"0.059"Fully Threaded70,000500000000000000
    1/2"100°
    Undercut
    0.255"0.059"Fully Threaded70,000500000000000000
     
    6-32
    1/4"100°
    Undercut
    0.307"0.066"Fully Threaded70,000500000000000000
    5/16"100°
    Undercut
    0.307"0.066"Fully Threaded70,000500000000000000
    3/8"100°
    Undercut
    0.307"0.066"Fully Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.307"0.066"Fully Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.307"0.066"Fully Threaded70,00010000000000000
     
    8-32
    3/8"100°
    Undercut
    0.359"0.076"Fully Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.359"0.076"Fully Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.359"0.076"Fully Threaded70,00010000000000000
     
    10-32
    3/8"100°
    Undercut
    0.411"0.084"Fully Threaded70,00010000000000000
    1/2"100°
    Undercut
    0.411"0.084"Fully Threaded70,00010000000000000
    5/8"100°
    Undercut
    0.411"0.084"Fully Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.411"0.084"Fully Threaded70,00010000000000000
    1"100°
    Undercut
    0.411"0.084"Fully Threaded70,00010000000000000
     
    1/4"-20
    1/2"100°
    Undercut
    0.531"0.105"Fully Threaded70,00010000000000000
    5/8"100°
    Undercut
    0.531"0.105"Fully Threaded70,00010000000000000
    3/4"100°
    Undercut
    0.531"0.105"Fully Threaded70,00010000000000000
    1"100°
    Undercut
    0.531"0.105"Fully Threaded70,00010000000000000
    1 1/4"100°
    Undercut
    0.531"0.105"Fully Threaded70,00010000000000000
    1 1/2"100°
    Undercut
    0.531"0.105"Fully Threaded70,00010000000000000
     
    5/16"-18
    3/4"100°
    Undercut
    0.656"0.127"Fully Threaded70,00010000000000000
    1"100°
    Undercut
    0.656"0.127"Fully Threaded70,00010000000000000
    1 1/4"100°
    Undercut
    0.656"0.127"Fully Threaded70,00010000000000000
    1 1/2"100°
    Undercut
    0.656"0.127"Fully Threaded70,00010000000000000
     
    M3 × 0.5 mm
    5 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000500000000000000
    6 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000500000000000000
    8 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000500000000000000
    10 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000500000000000000
    12 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000500000000000000
     
    M4 × 0.7 mm
    6 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,00010000000000000
    8 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,00010000000000000
    10 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,00010000000000000
    12 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,00010000000000000
    16 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,00010000000000000
     
    M5 × 0.8 mm
    8 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,00010000000000000
    10 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,00010000000000000
    12 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,00010000000000000
    16 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,00010000000000000
    20 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,00010000000000000
     
    M6 × 1 mm
    12 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,00010000000000000
    16 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,00010000000000000
    20 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,00010000000000000
    25 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,00010000000000000
    30 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,00010000000000000
     
    M8 × 1.25 mm
    16 mm100°
    Undercut
    16 mm2.8 mmFully Threaded70,00010000000000000
    20 mm100°
    Undercut
    16 mm2.8 mmFully Threaded70,00010000000000000
    25 mm100°
    Undercut
    16 mm2.8 mmFully Threaded70,00010000000000000
    30 mm100°
    Undercut
    16 mm2.8 mmFully Threaded70,00010000000000000
     
    M10 × 1.5 mm
    16 mm100°
    Undercut
    20 mm3.5 mmFully Threaded70,000ASTM A276100000000000000
    25 mm100°
    Undercut
    20 mm3.5 mmFully Threaded70,000ASTM A276100000000000000
    30 mm100°
    Undercut
    20 mm3.5 mmFully Threaded70,000ASTM A276100000000000000
    35 mm100°
    Undercut
    20 mm3.5 mmFully Threaded70,000ASTM A276100000000000000
    50 mm100°
    Undercut
    20 mm3.5 mmFully Threaded70,000ASTM A276100000000000000
     
    M12 × 1.75 mm
    25 mm100°
    Undercut
    24 mm4.2 mmFully Threaded70,000ASTM A276100000000000000
    30 mm100°
    Undercut
    24 mm4.2 mmFully Threaded70,000ASTM A276100000000000000
    35 mm100°
    Undercut
    24 mm4.2 mmFully Threaded70,000ASTM A276100000000000000
     
    Super-Corrosion-Resistant Black-Oxide 316 Stainless Steel
     
    M3 × 0.5 mm
    5 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000ASTM A27610000000000000
    6 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000ASTM A27610000000000000
    8 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000ASTM A27610000000000000
    10 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000ASTM A27610000000000000
    12 mm100°
    Undercut
    6 mm1.3 mmFully Threaded70,000ASTM A27610000000000000
     
    M4 × 0.7 mm
    6 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,000ASTM A27610000000000000
    8 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,000ASTM A27610000000000000
    10 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,000ASTM A27610000000000000
    12 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,000ASTM A27610000000000000
    16 mm100°
    Undercut
    8 mm1.6 mmFully Threaded70,000ASTM A27610000000000000
     
    M5 × 0.8 mm
    8 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,000ASTM A27610000000000000
    10 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,000ASTM A27610000000000000
    12 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,000ASTM A27610000000000000
    16 mm100°
    Undercut
    10 mm1.9 mmFully Threaded70,000ASTM A27610000000000000
     
    M6 × 1 mm
    12 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,000ASTM A27610000000000000
    16 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,000ASTM A27610000000000000
    20 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,000ASTM A27610000000000000
    30 mm100°
    Undercut
    12 mm2.2 mmFully Threaded70,000ASTM A27610000000000000
     
    M8 × 1.25 mm
    16 mm100°
    Undercut
    16 mm2.8 mmFully Threaded70,000ASTM A27610000000000000
    20 mm100°
    Undercut
    16 mm2.8 mmFully Threaded70,000ASTM A27610000000000000
    25 mm100°
    Undercut
    16 mm2.8 mmFully Threaded70,000ASTM A27610000000000000
     

    Stainless Steel Phillips Flat Head Screws

    Image of Product. Front orientation. Flat Head Screws. Stainless Steel Phillips Flat Head Screws.
    These screws are made of stainless steel, so they won't rust or corrode when exposed to moisture and chemicals. The Phillips drive has a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.
    Length is measured from the top of the head.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They won't rust in wet and outdoor environments, but they don't hold up to the harsh chemicals that 316 stainless steel can.
    Standard—Standard-profile heads are the most common choice for flat head screws.
    Undercut—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.
    Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.
    Head
    Lg.
    Countersink
    Angle
    Flat Head
    Profile
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Mil. Spec.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    0-80
    1/8"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.35000000000000000
    5/32"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    3/16"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    3/16"100°
    Standard
    0.119"0.026"Fully Threaded70,000NASM24693MS24693-C420500000000000000
    7/32"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    1/4"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    1/4"100°
    Standard
    0.119"0.026"Fully Threaded70,000NASM24693MS24693-C421500000000000000
    9/32"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    5/16"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    5/16"100°
    Standard
    0.119"0.026"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C422500000000000000
    11/32"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    3/8"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    3/8"100°
    Standard
    0.119"0.026"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C423500000000000000
    1/2"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
     
    2-56
    1/8"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C16500000000000000
    5/32"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C17500000000000000
    3/16"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    3/16"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R3, SAE AMS270010000000000000000
    1/4"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    1/4"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R4, SAE AMS270010000000000000000
    5/16"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R5, SAE AMS270010000000000000000
    3/8"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R6, SAE AMS270010000000000000000
    7/16"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R8, SAE AMS270010000000000000000
    5/8"100°
    Standard
    0.172"0.036"Fully Threaded70,000Fed. Spec. FF-S-92, NAS662C2R10500000000000000
    3/4"100°
    Standard
    0.172"0.036"Fully Threaded70,000Fed. Spec. FF-S-92, NAS662C2R12500000000000000
     
    4-40
    1/8"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.3500000000000000
    1/8"100°
    Undercut
    0.212"0.047"Fully Threaded80,000ASME B18.6.35000000000000000
    3/16"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    3/16"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C110000000000000000
    1/4"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    1/4"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C210000000000000000
    1/4"100°
    Undercut
    0.212"0.047"Fully Threaded80,000ASME B18.6.310000000000000000
    5/16"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C310000000000000000
    3/8"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C410000000000000000
    7/16"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    7/16"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C510000000000000000
    1/2"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C610000000000000000
    5/8"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C710000000000000000
    3/4"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C85000000000000000
    7/8"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C95000000000000000
    1"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C10250000000000000
    1 1/8"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C11250000000000000
    1 1/4"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C125000000000000000
    1 1/2"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C14250000000000000
     
    6-32
    3/16"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.31000000000000000
    3/16"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2310000000000000000
    3/16"100°
    Undercut
    0.262"0.059"Fully Threaded80,000ASME B18.6.3500000000000000
    1/4"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2410000000000000000
    1/4"100°
    Undercut
    0.262"0.059"Fully Threaded80,000ASME B18.6.310000000000000000
    5/16"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2510000000000000000
    3/8"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.310000000000000000
    3/8"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2610000000000000000
    3/8"100°
    Undercut
    0.262"0.059"Fully Threaded80,000ASME B18.6.31000000000000000
    7/16"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.310000000000000000
    7/16"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C275000000000000000
    1/2"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.310000000000000000
    1/2"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C285000000000000000
    5/8"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C295000000000000000
    3/4"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C305000000000000000
    7/8"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C315000000000000000
    1"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C32250000000000000
    1 1/8"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C33250000000000000
    1 1/4"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C342500000000000000
    1 1/2"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C36100000000000000
    2"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C40100000000000000
    2 1/2"100°
    Standard
    0.279"0.06"Partially Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C421000000000000000
     
    8-32
    3/16"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C465000000000000000
    5/16"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    5/16"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C475000000000000000
    3/8"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    3/8"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C485000000000000000
    7/16"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.31000000000000000
    7/16"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C49500000000000000
    1/2"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.3500000000000000
    1/2"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C505000000000000000
    5/8"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.3500000000000000
    5/8"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C515000000000000000
    3/4"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C525000000000000000
    7/8"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.3500000000000000
    7/8"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C53250000000000000
    1"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.35000000000000000
    1"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C542500000000000000
    1 1/8"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C552500000000000000
    1 1/4"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C562500000000000000
    1 1/2"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C58100000000000000
    1 3/4"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C60100000000000000
    2"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C62100000000000000
    2 1/2"100°
    Standard
    0.332"0.072"Partially Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C64100000000000000
     
    10-24
    5/16"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C695000000000000000
    3/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    3/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C702500000000000000
    7/16"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C71250000000000000
    1/2"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    1/2"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C72250000000000000
    5/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    5/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C73250000000000000
    3/4"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C74100000000000000
    7/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    1"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    1"100°
    Standard
    0.385"0.083"Fully Threaded70,000NASM24693MS24693-C762500000000000000
    1 1/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C78100000000000000
    1 1/2"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C80100000000000000
    2"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C84100000000000000
     
    10-32
    1/4"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    1/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C268250000000000000
    5/16"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    5/16"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C269250000000000000
    3/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    3/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2705000000000000000
    7/16"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2715000000000000000
    1/2"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    1/2"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2722500000000000000
    5/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    5/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2732500000000000000
    3/4"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    3/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2742500000000000000
    7/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3250000000000000
    7/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2752500000000000000
    1"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3250000000000000
    1"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2762500000000000000
    1 1/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C277100000000000000
    1 1/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C278100000000000000
    1 3/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C279100000000000000
    1 1/2"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C280100000000000000
    1 5/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C281100000000000000
    1 3/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2821000000000000000
    1 7/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2831000000000000000
    2"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C284100000000000000
    2 1/4"100°
    Standard
    0.385"0.083"Partially Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2851000000000000000
    2 1/2"100°
    Standard
    0.385"0.083"Partially Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2861000000000000000
     
    1/4"-20
    3/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000NASM24693MS24693-C922500000000000000
    7/16"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C931000000000000000
    1/2"100°
    Standard
    0.477"0.11"Fully Threaded80,000ASME B18.6.3250000000000000
    1/2"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C941000000000000000
    5/8"100°
    Standard
    0.477"0.11"Fully Threaded80,000ASME B18.6.32500000000000000
    5/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C951000000000000000
    3/4"100°
    Standard
    0.477"0.11"Fully Threaded80,000ASME B18.6.32500000000000000
    3/4"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C962500000000000000
    7/8"100°
    Standard
    0.477"0.11"Fully Threaded80,000ASME B18.6.32500000000000000
    1"100°
    Standard
    0.477"0.11"Fully Threaded80,000ASME B18.6.32500000000000000
    1"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C98100000000000000
    1 1/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C991000000000000000
    1 1/4"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C1001000000000000000
    1 1/2"100°
    Standard
    0.507"0.11"Fully Threaded70,000NASM24693MS24693-C1021000000000000000
    1 3/4"100°
    Standard
    0.507"0.11"Fully Threaded70,000NASM24693MS24693-C1041000000000000000
    2"100°
    Standard
    0.507"0.11"Fully Threaded70,000NASM24693MS24693-C1061000000000000000
     
    1/4"-28
    3/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000NASM24693MS24693-C2922500000000000000
    7/16"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C293100000000000000
    1/2"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C294100000000000000
    5/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C295100000000000000
    3/4"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2961000000000000000
    7/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2971000000000000000
    1"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2981000000000000000
    1 1/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C2991000000000000000
    1 1/4"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C3001000000000000000
    1 1/2"100°
    Standard
    0.507"0.11"Fully Threaded70,000NASM24693MS24693-C3021000000000000000
    1 5/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C303500000000000000
    1 3/4"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C304500000000000000
    1 7/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C30510000000000000
    2"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-C30610000000000000
     
    Black-Oxide 18-8 Stainless Steel
     
    0-80
    1/8"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    5/32"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    3/16"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    3/16"100°
    Standard
    0.119"0.026"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-420B250000000000000
    7/32"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    5/16"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
    7/16"100°
    Standard
    0.112"0.026"Fully Threaded80,000ASME B18.6.3500000000000000
     
    2-56
    1/8"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-16B2500000000000000
    5/32"100°
    Standard
    0.172"0.037"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-17B2500000000000000
    3/16"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    1/4"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    7/16"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"100°
    Standard
    0.162"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
     
    4-40
    3/16"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    3/16"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-1B2500000000000000
    1/4"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    1/4"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-2B250000000000000
    5/16"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-3B2500000000000000
    3/8"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-4B2500000000000000
    7/16"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    7/16"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-5B250000000000000
    1/2"100°
    Standard
    0.212"0.049"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-6B2500000000000000
    5/8"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-7B2500000000000000
    3/4"100°
    Standard
    0.225"0.049"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-8B250000000000000
     
    6-32
    3/16"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.31000000000000000
    3/16"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-23B250000000000000
    1/4"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.31000000000000000
    1/4"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-24B250000000000000
    5/16"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-25B2500000000000000
    3/8"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-26B250000000000000
    7/16"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.310000000000000000
    7/16"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-27B2500000000000000
    1/2"100°
    Standard
    0.262"0.06"Fully Threaded80,000ASME B18.6.3500000000000000
    1/2"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-28B250000000000000
    5/8"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-29B2500000000000000
    3/4"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-30B2500000000000000
    7/8"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-31B2500000000000000
    1"100°
    Standard
    0.279"0.06"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-32B2500000000000000
     
    8-32
    3/16"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-46B250000000000000
    5/16"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    5/16"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-47B2500000000000000
    3/8"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-48B2500000000000000
    7/16"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    7/16"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-49B250000000000000
    1/2"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.310000000000000000
    1/2"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-50B2500000000000000
    5/8"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.3500000000000000
    5/8"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-51B2500000000000000
    3/4"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-52B2500000000000000
    7/8"100°
    Standard
    0.312"0.072"Fully Threaded80,000ASME B18.6.3500000000000000
    7/8"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-53B2500000000000000
    1"100°
    Standard
    0.332"0.072"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-54B100000000000000
     
    10-24
    1/2"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    5/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    3/4"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    7/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    1"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
     
    10-32
    1/4"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    1/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-268B2500000000000000
    5/16"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-269B2500000000000000
    3/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3500000000000000
    3/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-270B2500000000000000
    7/16"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-271B2500000000000000
    1/2"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    1/2"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-272B2500000000000000
    5/8"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    5/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-273B2500000000000000
    3/4"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.35000000000000000
    3/4"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-274B100000000000000
    7/8"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-275B100000000000000
    1"100°
    Standard
    0.362"0.083"Fully Threaded80,000ASME B18.6.3250000000000000
    1"100°
    Standard
    0.385"0.083"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-276B100000000000000
     
    1/4"-20
    1/2"100°
    Standard
    0.477"0.11"Fully Threaded80,000ASME B18.6.32500000000000000
    1/2"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-94B1000000000000000
    5/8"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-95B1000000000000000
    3/4"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-96B1000000000000000
    1"100°
    Standard
    0.477"0.11"Fully Threaded80,000ASME B18.6.3100000000000000
    1"100°
    Standard
    0.507"0.11"Fully Threaded70,000Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700MS24693-98B1000000000000000
     

    Steel Phillips Flat Head Screws

    Image of Product. Front orientation. Flat Head Screws. Steel Phillips Flat Head Screws.
    One of the most common drive styles. Phillips drives have a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.
    Length is measured from the top of the head.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Cadmium-Plated Steel—The plating reduces friction between the screw and your mounting surface to prevent sticking when you tighten or loosen them. It also creates a barrier against rust.
    Standard—Standard-profile heads are the most common choice for flat head screws.
    Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.
    Head
    Lg.
    Countersink
    Angle
    Flat Head
    Profile
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Mil. Spec.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    2-56
    1/8"100°
    Standard
    0.162"0.037"Fully Threaded60,000ASME B18.6.3100000000000000000
    3/16"100°
    Standard
    0.162"0.037"Fully ThreadedNot RatedASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.162"0.037"Fully ThreadedNot RatedASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.162"0.037"Fully Threaded60,000ASME B18.6.310000000000000000
    3/8"100°
    Standard
    0.162"0.037"Fully Threaded60,000ASME B18.6.310000000000000000
    1/2"100°
    Standard
    0.162"0.037"Fully Threaded60,000ASME B18.6.31000000000000000
     
    4-40
    3/16"100°
    Standard
    0.212"0.049"Fully Threaded60,000ASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.212"0.049"Fully ThreadedNot RatedASME B18.6.31000000000000000
    5/16"100°
    Standard
    0.212"0.049"Fully Threaded60,000ASME B18.6.310000000000000000
    3/8"100°
    Standard
    0.212"0.049"Fully ThreadedNot RatedASME B18.6.31000000000000000
    1/2"100°
    Standard
    0.212"0.049"Fully Threaded60,000ASME B18.6.310000000000000000
    5/8"100°
    Standard
    0.212"0.049"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"100°
    Standard
    0.212"0.049"Fully Threaded60,000ASME B18.6.31000000000000000
    1"100°
    Standard
    0.212"0.049"Fully Threaded60,000ASME B18.6.31000000000000000
     
    6-32
    3/16"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.310000000000000000
    1/4"100°
    Standard
    0.262"0.06"Fully ThreadedNot RatedASME B18.6.310000000000000000
    5/16"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.310000000000000000
    3/8"100°
    Standard
    0.262"0.06"Fully ThreadedNot RatedASME B18.6.31000000000000000
    1/2"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.310000000000000000
    5/8"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.310000000000000000
    3/4"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.3500000000000000
    1"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.310000000000000000
    1 1/4"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.310000000000000000
    1 1/2"100°
    Standard
    0.262"0.06"Fully Threaded60,000ASME B18.6.35000000000000000
     
    8-32
    1/4"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.310000000000000000
    5/16"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.310000000000000000
    3/8"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.310000000000000000
    1/2"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.310000000000000000
    5/8"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.310000000000000000
    1"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.35000000000000000
    1 1/4"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.35000000000000000
    1 1/2"100°
    Standard
    0.312"0.072"Fully Threaded60,000ASME B18.6.310000000000000000
     
    10-24
    3/8"100°
    Standard
    0.362"0.116"Fully Threaded60,000ASME B18.6.35000000000000000
    1/2"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    5/8"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    1"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.35000000000000000
     
    10-32
    1/4"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    5/16"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    3/8"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    1/2"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    5/8"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    3/4"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    1"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.35000000000000000
    1 1/4"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.310000000000000000
    1 1/2"100°
    Standard
    0.362"0.083"Fully Threaded60,000ASME B18.6.35000000000000000
     
    1/4"-20
    3/8"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.3500000000000000
    1/2"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.35000000000000000
    5/8"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.310000000000000000
    3/4"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.32500000000000000
    1"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.32500000000000000
    1 1/4"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.32500000000000000
    1 1/2"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.31000000000000000
    1 3/4"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.31000000000000000
    2"100°
    Standard
    0.477"0.11"Fully Threaded60,000ASME B18.6.31000000000000000
    2 1/2"100°
    Standard
    0.477"0.153"Fully Threaded60,000ASME B18.6.31000000000000000
     
    5/16"-18
    3/4"100°
    Standard
    0.597"0.138"Fully Threaded60,000ASME B18.6.3250000000000000
    1"100°
    Standard
    0.597"0.138"Fully Threaded60,000ASME B18.6.32500000000000000
    1 1/4"100°
    Standard
    0.597"0.138"Fully Threaded60,000ASME B18.6.32500000000000000
    1 1/2"100°
    Standard
    0.597"0.138"Fully Threaded60,000ASME B18.6.32500000000000000
     
    3/8"-16
    3/4"100°
    Standard
    0.717"0.165"Fully Threaded60,000ASME B18.6.32500000000000000
    1"100°
    Standard
    0.717"0.165"Fully Threaded60,000ASME B18.6.31000000000000000
    1 1/4"100°
    Standard
    0.717"0.165"Fully Threaded60,000ASME B18.6.3100000000000000
     
    Cadmium-Plated Steel
     
    4-40
    3/16"100°
    Standard
    0.225"0.049"Fully Threaded60,000NASM24693MS24693-S11000000000000000
    1/4"100°
    Standard
    0.225"0.049"Fully Threaded60,000NASM24693MS24693-S210000000000000000
    3/8"100°
    Standard
    0.225"0.049"Fully Threaded60,000NASM24693MS24693-S410000000000000000
    1/2"100°
    Standard
    0.225"0.049"Fully Threaded60,000NASM24693MS24693-S610000000000000000
     
    6-32
    1/4"100°
    Standard
    0.279"0.06"Fully Threaded60,000NASM24693MS24693-S2410000000000000000
    3/8"100°
    Standard
    0.279"0.06"Fully Threaded60,000NASM24693MS24693-S2610000000000000000
    1/2"100°
    Standard
    0.279"0.06"Fully Threaded60,000NASM24693MS24693-S28500000000000000
     
    8-32
    3/8"100°
    Standard
    0.332"0.072"Fully Threaded60,000NASM24693MS24693-S48500000000000000
    1/2"100°
    Standard
    0.332"0.072"Fully Threaded60,000NASM24693MS24693-S50500000000000000
    3/4"100°
    Standard
    0.332"0.072"Fully Threaded60,000NASM24693MS24693-S525000000000000000
     
    10-32
    3/8"100°
    Standard
    0.385"0.083"Fully Threaded60,000NASM24693MS24693-S2705000000000000000
    1/2"100°
    Standard
    0.385"0.083"Fully Threaded60,000NASM24693MS24693-S2725000000000000000
    3/4"100°
    Standard
    0.385"0.083"Fully Threaded60,000NASM24693MS24693-S2745000000000000000
    1"100°
    Standard
    0.385"0.083"Fully Threaded60,000NASM24693MS24693-S2765000000000000000
     
    1/4"-20
    1/2"100°
    Standard
    0.507"0.11"Fully Threaded60,000NASM24693MS24693-S94250000000000000
     

    Sealing Stainless Steel Phillips Drive Flat Head Screws

    Image of Product. Front orientation. Flat Head Screws. Sealing Stainless Steel Phillips Drive Flat Head Screws.
    Image of Product. Back orientation. Contains Annotated. Sealing Stainless Steel Phillips Drive Flat Head Screws.
    Keep out dust and contaminants while locking in air and fluid. These screws have a rubber O-ring under the head that compresses to form a tight seal as you tighten them. You can use them for everything from sealing moisture out of enclosures to preventing lubricants from leaking out of machinery. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. The Phillips drive has a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.
    These screws are reusable as long as the rubber O-ring is intact and undamaged. Length is measured from the top of the head.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
    Buna-N O-Ring—These seals won't swell or soften when they touch oil, grease, or fuel. However, they will break down if exposed to synthetic lubricants.
    Silicone Rubber O-Ring—Withstand a wider range of temperatures than Buna-N and Viton seals without becoming brittle. However, they degrade when exposed to oil, grease, and fuel.
    Standard—Standard-profile heads are the most common choice for flat head screws.
    Undercut—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.
    Head
    Lg.
    Countersink
    Angle
    Flat Head
    Profile
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    For Max.
    Hole Dia.
    O-Ring Temp.
    Range, ° F
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel with Buna-N O-Ring
     
    2-56
    3/16"100°
    Undercut
    0.172"0.035"Fully Threaded70,0000.095"-40 to 22510000000000000000
    1/4"100°
    Undercut
    0.172"0.035"Fully Threaded70,0000.095"-40 to 2251000000000000000
    3/8"100°
    Undercut
    0.172"0.035"Fully Threaded70,0000.095"-40 to 225100000000000000
     
    4-40
    3/16"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
    1/4"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
    5/16"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
    3/8"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
    1/2"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
    5/8"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
    3/4"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
    1"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-40 to 225100000000000000
     
    6-32
    3/16"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
    1/4"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
    3/8"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
    1/2"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
    5/8"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
    3/4"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
    7/8"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
    1"100°
    Undercut
    0.279"0.038"Fully Threaded70,0000.152"-40 to 2251000000000000000
     
    8-32
    1/4"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 2251000000000000000
    3/8"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 2251000000000000000
    7/16"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 225100000000000000
    1/2"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 2251000000000000000
    9/16"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 225100000000000000
    5/8"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 2251000000000000000
    3/4"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 2251000000000000000
    7/8"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 225100000000000000
    1"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-40 to 225100000000000000
     
    10-24
    3/8"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
    5/8"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
    3/4"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
     
    10-32
    3/8"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
    1/2"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
    5/8"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
    3/4"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
    1"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-40 to 2251000000000000000
     
    1/4"-20
    3/8"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-40 to 225500000000000000
    1/2"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-40 to 225500000000000000
    5/8"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-40 to 225500000000000000
    3/4"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-40 to 225500000000000000
    1"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-40 to 225500000000000000
     
    18-8 Stainless Steel with Silicone Rubber O-Ring
     
    2-56
    3/16"100°
    Undercut
    0.172"0.035"Fully Threaded70,0000.095"-80 to 4001000000000000000
    1/4"100°
    Undercut
    0.172"0.035"Fully Threaded70,0000.095"-80 to 4001000000000000000
    3/8"100°
    Undercut
    0.172"0.035"Fully Threaded70,0000.095"-80 to 400100000000000000
     
    4-40
    3/16"100°
    Standard
    0.225"0.034"Fully Threaded70,0000.129"-150 to 500100000000000000
    1/4"100°
    Standard
    0.225"0.038"Fully Threaded70,0000.129"-150 to 500100000000000000
    5/16"100°
    Standard
    0.225"0.039"Fully Threaded70,0000.129"-150 to 500100000000000000
    3/8"100°
    Standard
    0.225"0.039"Fully Threaded70,0000.129"-150 to 500100000000000000
    1/2"100°
    Standard
    0.225"0.037"Fully Threaded70,0000.129"-150 to 500100000000000000
    5/8"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-80 to 400100000000000000
    3/4"100°
    Undercut
    0.224"0.033"Fully Threaded70,0000.129"-80 to 400100000000000000
     
    6-32
    1/4"100°
    Standard
    0.279"0.038"Fully Threaded70,0000.152"-150 to 500100000000000000
    5/16"100°
    Standard
    0.279"0.038"Fully Threaded70,0000.152"-150 to 500100000000000000
    3/8"100°
    Standard
    0.279"0.038"Fully Threaded70,0000.152"-150 to 500100000000000000
    1/2"100°
    Standard
    0.279"0.038"Fully Threaded70,0000.152"-150 to 500100000000000000
    5/8"100°
    Standard
    0.279"0.038"Fully Threaded70,0000.152"-150 to 5001000000000000000
    3/4"100°
    Standard
    0.279"0.038"Fully Threaded70,0000.152"-150 to 500100000000000000
     
    8-32
    1/4"100°
    Standard
    0.332"0.048"Fully Threaded70,0000.179"-150 to 500100000000000000
    3/8"100°
    Standard
    0.332"0.048"Fully Threaded70,0000.179"-150 to 500100000000000000
    7/16"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-80 to 400100000000000000
    1/2"100°
    Standard
    0.332"0.048"Fully Threaded70,0000.179"-150 to 500100000000000000
    9/16"100°
    Undercut
    0.332"0.048"Fully Threaded70,0000.179"-80 to 400100000000000000
    5/8"100°
    Standard
    0.332"0.048"Fully Threaded70,0000.179"-150 to 5001000000000000000
    3/4"100°
    Standard
    0.332"0.048"Fully Threaded70,0000.179"-150 to 500100000000000000
     
    10-24
    1/2"100°
    Standard
    0.385"0.053"Fully Threaded70,0000.204"-150 to 5001000000000000000
    3/4"100°
    Standard
    0.385"0.053"Fully Threaded70,0000.204"-150 to 5001000000000000000
     
    10-32
    3/8"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-80 to 4001000000000000000
    1/2"100°
    Standard
    0.385"0.053"Fully Threaded70,0000.204"-150 to 500100000000000000
    5/8"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-80 to 4001000000000000000
    3/4"100°
    Undercut
    0.385"0.053"Fully Threaded70,0000.204"-80 to 4001000000000000000
    1"100°
    Standard
    0.385"0.053"Fully Threaded70,0000.204"-150 to 5001000000000000000
     
    1/4"-20
    3/8"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-80 to 400500000000000000
    1/2"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-80 to 400500000000000000
    5/8"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-80 to 400500000000000000
    3/4"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-80 to 400500000000000000
    1"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-80 to 400500000000000000
    1 1/2"100°
    Undercut
    0.507"0.073"Fully Threaded70,0000.265"-80 to 400500000000000000
     

    Plastic Slotted Flat Head Screws

    Image of Product. Front orientation. Flat Head Screws. Plastic Slotted Flat Head Screws.
    These plastic screws are lightweight, nonconductive, and naturally resistant to rust. Use them to attach panels and covers to electronics and automated equipment. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.
    Length is measured from the top of the head.
    Nylon—The most common plastic flat head screws, these are good for general purpose fastening. They are slippery and abrasion resistant, so they thread in smoothly and stand up to daily wear and tear. Nylon will swell and weaken when exposed to moisture, so these screws are best for dry environments.
    Standard—Standard-profile heads are the most common choice for flat head screws.
    Head
    Lg.
    Countersink
    Angle
    Flat Head
    Profile
    Dia.
    Ht.
    Threading
    Tensile
    Strength
    Temp. Range,
    ° F
    Specs. Met
    Choose a Color
    Pkg.
    Qty.
    Pkg.
    Nylon
     
    2-56
    3/32"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    100000000000000000
    1/8"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/16"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/4"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/16"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/8"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    7/16"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/2"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/4"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1"100°
    Standard
    0.172"0.037"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
     
    4-40
    3/16"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/4"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    9/32"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/16"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/8"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/2"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/8"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/4"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1"100°
    Standard
    0.225"0.049"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
     
    6-32
    3/16"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/4"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/16"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/8"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/2"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/8"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/4"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1"100°
    Standard
    0.279"0.060"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
     
    8-32
    1/4"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/8"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/2"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/8"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/4"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1 1/4"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1 1/2"100°
    Standard
    0.332"0.072"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
     
    10-24
    1/4"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/2"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/4"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1 1/2"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
     
    10-32
    1/4"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/8"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/2"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/8"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/4"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1 1/2"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    2"100°
    Standard
    0.385"0.083"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
     
    1/4"-20
    1/4"100°
    Standard
    0.507"0.110"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1/2"100°
    Standard
    0.507"0.110"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    5/8"100°
    Standard
    0.507"0.110"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    3/4"100°
    Standard
    0.507"0.110"Fully ThreadedNot Rated-32 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    1"100°
    Standard
    0.507"0.110"Fully ThreadedNot Rated-32 to 185ASME B18.6.3
    Black
    ,
    Off-White
    0000000000000
    1 1/2"100°
    Standard
    0.507"0.110"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
    2"100°
    Standard
    0.507"0.110"Fully ThreadedNot Rated-40 to 185ASME B18.6.3
    Black
    ,
    Off-White
    10000000000000000
     

    Stainless Steel Slotted Flat Head Screws

    Image of Product. Front orientation. Flat Head Screws. Stainless Steel Slotted Flat Head Screws.
    The most corrosion-resistant slotted flat head screws we offer. Made of stainless steel, they won't rust or corrode when exposed to moisture or chemicals. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.
    Length is measured from the top of the head.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
    Standard—Standard-profile heads are the most common choice for flat head screws.
    Head,
    mm
    Lg.,
    mm
    Countersink
    Angle
    Flat Head
    Profile
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    M0.5 × 0.125 mm
    2100°
    Standard
    0.940.28Fully Threaded70,000NAS723CE50-0801000000000000000
    3100°
    Standard
    0.940.28Fully Threaded70,000NAS723CE50-120100000000000000
     
    M0.8 × 0.2 mm
    2100°
    Standard
    1.420.41Fully Threaded70,000NAS723CE80-08010000000000000
    3100°
    Standard
    1.420.41Fully Threaded70,000NAS723CE80-12010000000000000
     
    M0.9 × 0.225 mm
    2100°
    Standard
    1.520.38Fully Threaded70,000NAS723CE90-08010000000000000
    3100°
    Standard
    1.520.38Fully Threaded70,000NAS723CE90-12010000000000000
    4100°
    Standard
    1.520.38Fully Threaded70,000NAS723CE90-16010000000000000
     
    back to top