2904A22 | Router Bit for Wood, Particle Board and Plywood

Filter by

System of Measurement

Shank Diameter

Cutting Diameter

For Use On

Cut Style

Tool Type

Length of Cut

Number of Flutes

Flute Type

Overall Length

Material

Chip Removal Direction

Down

Up and Down

Finish

Aluminum Titanium Nitride (AlTiN) Coated

Zirconium Nitride (ZrN) Coated

Cut Radius

Corner Type

Bullnose with Beading

Cut Angle

Pilot Location

Length

Sold As

Router Bit Pilot Type

Ball Bearing

Solid

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

Ball Bearing Pilot Diameter

545 Products

Trimming Router Bits

Cut layers of material flush to one another or make cuts along a template.

Uncoated Carbide-Tipped High-Speed Steel


Flush-Trimming Cut Style (Bottom Pilot)	Flush-Trimming Cut Style (Top Pilot)

Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut


Bottom Pilot	Top Pilot

Carbide-tipped high-speed steel bits are for use on wood and laminate.

Bottom Pilot—Bottom-pilot bits trim material from an upper layer of the workpiece so that it is flush with the layer below. In addition to flush trimming, they can be used to cut along a template placed below the workpiece.

Top Pilot—Top-pilot bits cut a lower layer of the workpiece flush to the layer above. In addition to flush trimming, they can be used for pattern cutting with a template placed above the workpiece.

Plunge Cut—Bits with a plunge cut type let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Lg. of Cut	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Flush-Trimming Cut Style (Bottom Pilot)







			Straight Flutes

			3/16"	7/16"	1/8"	1 23/32"	Ball Bearing	3/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N103	000000


			3/16"	7/16"	1/4"	2"	Ball Bearing	3/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N104	00000
			3/16"	3/4"	1/4"	2 7/16"	Ball Bearing	3/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N105	00000
			1/4"	1/2"	1/4"	2 1/4"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N22	00000
			1/4"	1"	1/4"	2 1/2"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A11	00000
			3/8"	1/2"	1/4"	2 1/4"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A62	00000
			3/8"	1"	1/4"	2 3/4"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A63	00000
			3/8"	1"	1/2"	3 1/8"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N106	00000
			3/8"	1 1/4"	1/4"	2 3/8"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N23	00000
			1/2"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A64	00000
			1/2"	1/2"	1/4"	2"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N24	00000


			1/2"	1/2"	1/2"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N107	00000
			1/2"	1"	1/4"	2 3/4"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A65	00000
			1/2"	1"	3/8"	2 7/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N108	00000
			1/2"	1"	1/2"	3 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A66	00000
			1/2"	1 1/4"	1/4"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N109	00000
			1/2"	1 1/2"	1/2"	3 7/8"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N25	00000
			1/2"	1 1/2"	1/2"	4 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A67	00000
			1/2"	2"	1/2"	4 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A68	00000
			1/2"	2"	1/2"	4 5/8"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N26	00000
			3/4"	1"	1/2"	3 1/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N27	00000


			3/4"	1 1/4"	1/2"	3 1/2"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N28	00000


			Flush-Trimming Cut Style (Top Pilot)







							Straight Flutes

							3/8"	1/2"	1/4"	2"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N16	00000


							1/2"	1/4"	1/4"	1 5/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N12	00000
							1/2"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N13	00000
							1/2"	1"	1/4"	2 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N11	00000
							3/4"	1"	1/2"	3"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N14	00000
							3/4"	1 3/4"	1/2"	3 3/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N15	00000


							Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut







									Straight Flutes

	1/4"								3/4"	1/4"	2 7/16"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N111	00000


	3/8"	1/2"							1/4"	2"	Ball Bearing	3/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N112	00000
	1/2"	3/8"							1/4"	2 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N114	00000
	1/2"	1/2"							1/4"	2 1/2"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N115	00000
	1/2"	1/2"							1/2"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N116	00000
	1/2"	3/4"							1/4"	2 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N117	00000
	1/2"	3/4"							5/16"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N118	00000
	1/2"	1"							1/4"	2 1/2"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N122	00000
	1/2"	1 1/4"							1/4"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N119	00000
	1/2"	1 1/4"							1/2"	3 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N121	00000
	9/16"	3/4"							1/4"	2 5/16"	Ball Bearing	9/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N123	00000


	5/8"	1/2"							1/4"	2 1/4"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N124	00000
	5/8"	3/4"							1/4"	2 1/2"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N125	00000
	5/8"	3/4"							1/4"	2 5/8"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N126	00000
	5/8"	1"							1/4"	2 3/4"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N127	00000
	5/8"	1 1/4"							1/2"	3 1/2"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N128	00000
	3/4"	3/4"							1/4"	2 3/8"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N129	00000
	3/4"	3/4"							1/2"	2 3/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N131	00000
	3/4"	1"							1/4"	2 1/2"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N132	00000
	3/4"	1"							1/2"	3 1/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N113	00000
	3/4"	1 1/4"							1/2"	3 11/32"	Ball Bearing	3/4"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N134	00000


	3/4"	2"							1/2"	4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N133	00000
	1"	1"							3/8"	2 7/8"	Ball Bearing	1"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N135	00000
	1"	1"							1/2"	2 3/4"	Ball Bearing	1"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N136	00000
	1"	1 3/4"							1/2"	3 3/4"	Ball Bearing	1"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N137	00000
	1 1/8"	1"							1/2"	3"	Ball Bearing	1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N138	00000
	1 1/8"	1 1/2"							1/2"	3 1/2"	Ball Bearing	1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N139	00000
	1 1/8"	2"							1/2"	4"	Ball Bearing	1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N141	00000
	1 1/4"	1 1/2"							1/2"	3 3/8"	Ball Bearing	1 1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N142	00000
	1 1/2"	1 3/4"	1/2"						3 3/4"	Ball Bearing	1 1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N143	00000

Uncoated Carbide


Flush-Trimming Cut Style (Bottom Pilot)	Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut


Flush-Trimming Cut Style (Bottom Pilot), Straight Flutes	Flush-Trimming Cut Style (Bottom Pilot), Spiral Flutes

Top Pilot

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Spiral Flute—Bits with spiral flutes leave a smoother finish than straight-flute bits and make plunge cuts more easily (for plunge-cutting bits).

Upward and Downward Chip Removal—Bits with upward and downward chip removal are also known as compression bits. Acting like scissors, they move chips away from the top and bottom edges of the cut for a smooth finish on both.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

Solid—Solid pilots guide the bit while routing. They are more durable than ball-bearing bits.

1 Flute—Choose a bit with one flute for a faster cut; bits with more flutes produce a smoother finish.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Flush-Trimming Cut Style (Bottom Pilot)







	Straight Flutes

	1/4"	1/4"	1/4"	1 1/2"	Solid	—	1	Hand Router, Router Table	Laminate	35505A61	000000


	1/4"	3/8"	1/4"	2"	Solid	—	1	Hand Router, Router Table	Laminate	35505A69	00000
	1/4"	7/16"	1/4"	1 5/8"	Solid	—	2	Hand Router, Router Table	Laminate	35505A71	00000




			Spiral Flutes

			1/4"	5/8"	1/4"	2 3/8"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Aluminum, Laminate, Foam, Composite	2819N11	00000


			1/4"	3/4"	1/4"	3"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Laminate, Foam, Composite	3116N17	00000
			1/2"	5/8"	1/2"	3 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Aluminum Laminate	3116N144	000000
			1/2"	1 1/8"	1/2"	4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Laminate, Foam, Composite	3116N18	000000


			Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut







							Spiral Flutes with Upward and Downward Chip Removal

							1/2"	1"	1/4"	2 5/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Plywood, Laminate	3116N101	000000


							7/8"	1 1/8"	1/2"	3 15/16"	Ball Bearing	7/8"	2	Hand Router, Router Table	Wood, Plywood, Laminate	3116N102	000000

Uncoated Micrograin Carbide

Flush-Trimming Cut

Style (Bottom Pilot)

Bottom Pilot

Bottom Pilot with

Overhang Cutoff Edge

Micrograin carbide bits provide superior wear resistance, long tool life, and a cleaner finish than bits made of other materials.

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

1 Flute—Choose a bit with one flute for a faster cut; bits with more flutes produce a smoother finish.

Overhang Cutoff Edge—Bits with an overhang cutoff edge remove most of the excess material from the edge of workpieces such as countertops and sink cutouts, but they leave some material leftover for precise trimming after the installation. This process minimizes the risk of chipping laminate during installation and produces a clean, professional finish.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On	Features		Each
Flush-Trimming Cut Style (Bottom Pilot)







	Straight Flutes

	3/8"	1/2"	1/4"	2 7/16"	Ball Bearing	3/4"	1	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	Overhang Cutoff Edge	6557N12	000000


	1/2"	3/8"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	—	3116N201	00000
	1/2"	1"	1/4"	2 11/16"	Ball Bearing	5/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	Overhang Cutoff Edge	6557N11	00000
	5/8"	3/8"	1/4"	2"	Ball Bearing	5/8"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	—	3116N202	00000

Uncoated Diamond-Tipped Carbide

Flush-Trimming Cut

Style (Bottom Pilot)

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel.

Diamond-tipped carbide bits are for use on aluminum and composites.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Flush-Trimming Cut Style (Bottom Pilot)







	Straight Flutes

	1/2"	7/16"	1/4"	2 5/16"	Ball Bearing	1/2"	2	Hand Router, Router Table	Aluminum, Fiberglass, Composite	3116N19	0000000


	1/2"	1"	1/4"	2 13/16"	Ball Bearing	1/2"	2	Hand Router, Router Table	Aluminum, Fiberglass, Composite	3116N21	000000

Straight and Spiral Router Bits for Wood, Particle Board, and Plywood

Square Cut Style

Create square slots, pockets, and edges in wood. These router bits are plunge cutting, letting you cut directly into the workpiece from above. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Uncoated High-Speed Steel

Square Cut

Style—Plunge-Cut,

Straight Flutes

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish. They’re made from high-speed steel.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Straight Flutes

	3/16"	5/8"	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A11	00000


	1/4"	3/4"	1/2"	2 3/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A12	00000
	1/4"	1"	1/4"	2 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A23	00000
	5/16"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A13	00000
	3/8"	1"	1/4"	2 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A24	00000
	3/8"	1 1/2"	1/2"	3"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A14	00000
	1/2"	3/4"	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A25	00000
	1/2"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A16	00000
	1/2"	2"	1/2"	4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A27	00000
	5/8"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A18	00000
	3/4"	3/4"	1/4"	1 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A26	00000


	3/4"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A19	00000
	7/8"	1 1/2"	1/2"	3"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A21	00000
	1"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2891A22	00000

Uncoated Carbide-Tipped High-Speed Steel

Square Cut

Style—Plunge-Cut,

Straight Flutes

Carbide-tipped high-speed steel bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish. They’re made from high-speed steel.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Straight Flutes

	1/4"	7/8"	1/4"	2 1/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A22	000000
	Router Bit for Wood, Particle Board and Plywood, Carbide-Tipped High-Speed Steel, 1/4" Cutting Diameter, 7/8" Length of Cut Product Detail QuantityEachIn stock Select a compatible file type: Parasolid


	1/4"	1"	1/4"	2 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A31	00000
	5/16"	1"	1/4"	2 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A11	00000
	3/8"	1"	1/4"	2 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A13	00000
	3/8"	1"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A14	00000
	3/8"	1 1/4"	1/2"	3"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A15	00000
	1/2"	1"	1/4"	2 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A23	00000
	1/2"	1"	1/2"	2 5/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A16	00000
	1/2"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A32	00000
	1/2"	1 1/4"	1/2"	2 7/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A26	00000
	1/2"	1 1/2"	1/2"	3 1/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A17	00000


	1/2"	2"	1/2"	4 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A18	00000
	5/8"	3/4"	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A24	00000
	5/8"	1 1/4"	1/2"	2 7/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A19	00000
	3/4"	3/4"	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A25	00000
	3/4"	1 1/4"	1/2"	2 7/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	2904A21	00000

Uncoated Carbide

Spiral Flute—Bits with spiral flutes leave a smoother finish than straight-flute bits and make plunge cuts more easily. They're made of solid carbide for longer tool life and faster cutting speeds than high-speed steel.

Downward Chip Removal—Spiral-flute bits with downward chip removal push chips down for applications that require a smooth finish on the cut's top edge.

Upward Chip Removal—Spiral-flute bits with upward chip removal lift chips up for applications that require a smooth finish on the bottom edge of the cut. Securely clamp the workpiece before routing to prevent lifting.

Upward and Downward Chip Removal—Spiral-flute bits with upward and downward chip removal are also known as compression bits. Acting similar to scissors, they move chips away from the top and bottom edges of the cut for a smooth finish on both.

1 Flute—Choose a bit with one flute for a faster cut; bits with more flutes produce a smoother finish.

	Cutting Dia.	Lg. of Cut	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







			Spiral Flutes with Upward Chip Removal

			1/8"	1/2"	1/4"	2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A21	000000


			5/32"	5/8"	1/4"	2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A22	00000
			3/16"	3/4"	1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A23	00000
			1/4"	3/4"	1/4"	2 1/2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A201	00000
			1/4"	7/8"	1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A24	00000
			1/4"	1"	1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A25	00000
			5/16"	1 1/8"	5/16"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A26	00000
			5/16"	1 1/8"	1/2"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A27	000000
			3/8"	1 1/8"	3/8"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A28	00000
			3/8"	1 1/4"	3/8"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A37	00000
			3/8"	1 1/4"	3/8"	3"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A202	00000


			3/8"	1 1/4"	1/2"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A29	000000
			1/2"	1 1/4"	1/2"	3 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A31	000000
			1/2"	1 1/2"	1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A203	000000
			1/2"	1 5/8"	1/2"	3 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A32	000000
			1/2"	2"	1/2"	4"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A204	000000
			1/2"	2 1/8"	1/2"	4"	2	CNC Machine	Wood, Particleboard, Plywood	27395A33	000000




					Spiral Flutes with Downward Chip Removal

					1/8"	1/2"	1/4"	2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A41	00000


					5/32"	5/8"	1/4"	2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A42	00000
					3/16"	3/4"	1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A43	00000
					1/4"	7/8"	1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A44	00000
					1/4"	1"	1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A45	00000
					5/16"	1 1/8"	5/16"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A46	00000
					5/16"	1 1/8"	1/2"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A47	000000
					3/8"	1 1/8"	3/8"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A48	00000
					3/8"	1 1/4"	3/8"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A57	00000
					3/8"	1 1/4"	3/8"	3"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A205	00000
					3/8"	1 1/4"	1/2"	3"	2	CNC Machine	Wood, Particleboard, Plywood	27395A49	000000


					1/2"	1 1/4"	1/2"	3 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A51	000000
					1/2"	1 1/2"	1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A206	000000
					1/2"	1 5/8"	1/2"	3 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	27395A52	000000
					1/2"	2"	1/2"	4"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A207	000000
					1/2"	2 1/8"	1/2"	4"	2	CNC Machine	Wood, Particleboard, Plywood	27395A53	000000




							Spiral Flutes with Upward and Downward Chip Removal

							1/8"	3/8"	1/4"	2 1/2"	1	CNC Machine	Wood, Particleboard, Plywood	2911N14	00000


1/4"	7/8"						1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood	2911N11	00000
3/8"	7/8"						3/8"	3"	2	CNC Machine	Wood, Particleboard, Plywood	2911N15	000000
3/8"	1 1/8"						3/8"	3"	2	CNC Machine	Wood, Particleboard, Plywood	2911N12	000000
1/2"	7/8"						1/2"	3"	2	CNC Machine	Wood, Particleboard, Plywood	2911N16	000000
1/2"	1 1/8"	1/2"					3"	2	CNC Machine	Wood, Particleboard, Plywood	2911N13	000000

Ceramic-Coated Carbide

Square Cut

Style—Plunge-Cut,

Spiral Flute

Ceramic-coated carbide bits are harder and protected from high heat, making them last about 2.5 times longer than uncoated bits.

Downward Chip Removal—Spiral-flute bits with downward chip removal push chips down for applications that require a smooth finish on the cut's top edge.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Spiral Flutes with Upward Chip Removal

	1/8"	1/2"	1/4"	2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A208	000000


	1/4"	3/4"	1/4"	2 1/2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A209	00000
	1/2"	1 1/2"	1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A211	000000




			Spiral Flutes with Downward Chip Removal

			1/8"	1/2"	1/4"	2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A212	00000


			1/4"	3/4"	1/4"	2 1/2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A213	00000
			1/2"	1 1/2"	1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	27395A214	000000

Corner-Rounding Router Bits

Choose from bits that form a variety of shapes along the edges of your workpiece.

Uncoated Carbide-Tipped Steel


Rounded Corner Style	Bullnose Corner Style	Rounded with Beading Corner Style	Bullnose with Beading Corner Style

Cove Corner Style	Wavy Corner Style	Roman Ogee Corner Style

Carbide-tipped steel bits are for use on wood.

Ball Bearing—Bits with a ball-bearing pilot operate smoothly thanks to the pilot, which decreases friction and guides the bit for accurate cuts. Other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

	Cut Radius	Lg. of Cut	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	Bead Radius	For Tool Type	For Use On		Each
Rounded Corner Style







			Straight Flutes

			5/8"	1/16"	5/16"	1/4"	1 3/4"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A41	000000


			3/4"	1/8"	3/8"	1/4"	2 1/8"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A29	00000
			13/16"	5/32"	15/32"	1/4"	2 3/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A37	00000
			7/8"	3/16"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A36	00000
			1"	1/4"	7/16"	1/4"	1 29/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A31	00000
			1 1/4"	3/8"	5/8"	1/4"	2 1/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A32	00000
			1 1/2"	1/2"	3/4"	1/4"	2 5/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A33	00000
			1 1/2"	1/2"	3/4"	1/2"	2 11/16"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A34	00000
			1 3/4"	5/16"	9/16"	1/4"	2 1/4"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A38	00000
			2"	3/4"	1 1/32"	1/2"	3"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A35	00000


			Bullnose Corner Style







							Straight Flutes

							19/32"	—	1/2"	1/2"	2"	—	—	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N11	00000


							7/8"	—	3/4"	1/2"	2 1/4"	—	—	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N12	00000


							Rounded with Beading Corner Style







											Straight Flutes

											5/8"	1/16"	5/16"	1/4"	1 3/4"	Ball Bearing	3/8"	2	1/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A41	00000


											7/8"	3/16"	1/2"	1/4"	2"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A43	00000
											1"	1/4"	7/16"	1/4"	1 29/32"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A71	00000
											1 1/4"	3/8"	23/32"	1/4"	2 3/8"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A72	00000
											1 1/2"	1/2"	13/16"	1/4"	2 13/32"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A73	00000


											Bullnose with Beading Corner Style







													Straight Flutes

													7/8"	1/8"	9/16"	1/4"	2 1/8"	Ball Bearing	1/2"	2	1/8"	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N13	00000


	1 1/8"	3/16"											11/16"	1/4"	2 1/4"	Ball Bearing	5/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N14	00000
	1 1/4"	1/4"											3/4"	1/4"	2 5/16"	Ball Bearing	5/8"	2	1/4"	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N15	00000


	Cove Corner Style







															Straight Flutes

															7/8"	1/4"	9/16"	1/4"	2"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29655A11	00000


															1 1/8"	3/8"	9/16"	1/4"	2"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29655A12	00000
			1 3/8"												1/2"	5/8"	1/4"	2 1/8"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29655A13	00000


			Wavy Corner Style







															Straight Flutes

															1 1/4"	—	5/8"	1/4"	2 1/4"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29875A31	00000


															Roman Ogee Corner Style







															Straight Flutes

															1 1/8"	5/32"	9/16"	1/4"	2"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35495A11	00000

Uncoated Carbide

Rounded Corner Style

Use solid carbide bits to round off sharp edges on plastic sheets. Their extreme hardness makes them brittle, so they’re not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking.

	Shank Dia.	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Rounded Corner Style







	Straight Flutes

	1/4"	1/8"	3/8"	1/4"	2 1/2"	1	CNC Machine	Hard Plastic, Soft Plastic	3144A21	000000


	1/4"	3/16"	3/8"	1/4"	2 1/2"	1	CNC Machine	Hard Plastic, Soft Plastic	3144A22	00000
	1/4"	1/4"	3/8"	1/4"	2 1/2"	1	CNC Machine	Hard Plastic, Soft Plastic	3144A23	00000

Straight and Spiral Router Bits for Plastic

The smooth flutes and sharp cutting edges on these router bits cleanly cut square slots, pockets, and edges in most plastics, including polyethylene, polycarbonate, and vinyl. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Uncoated High-Speed Steel


Square Cut Style	Straight Flute

High-speed steel bits are for general purpose use. They can be used with hand tools, router tables, and CNC machines.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

1 Flute—Choose a bit with one flute for a faster cut; bits with more flutes produce a smoother finish.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style







	Straight Flutes

	1/8"	1/2"	1/4"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	36035A21	000000


	3/16"	5/8"	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	36035A41	00000
	1/4"	3/4"	1/4"	2 1/8"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	36035A42	00000
	1/4"	1"	1/4"	2 3/8"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	36035A43	00000
	1/4"	2"	1/4"	3 1/4"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	8782A41	00000
	3/8"	1"	3/8"	2 1/2"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	36035A45	00000
	1/2"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	36035A47	00000

Uncoated Carbide


Square Cut Style	Square Cut Style—Plunge-Cut


Straight Flute	Square Cut Style Spiral Flute

Square Cut Style—Plunge-Cut, Spiral Flute

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Spiral Flute—Bits with spiral flutes leave a smoother finish than straight-flute bits.

Downward Chip Removal—Bits with downward chip removal push chips down for applications that require a smooth finish on the cut's top edge.

Upward Chip Removal—Bits with upward chip removal lift chips up for applications that require a smooth finish on the bottom edge of the cut. Securely clamp the workpiece before routing to prevent lifting.

1 Flute—Choose a bit with one flute for a faster cut; bits with more flutes produce a smoother finish.

	Cutting Dia.	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style







		Straight Flutes

		1/8"	1/4"	1/4"	2"	2	CNC Machine	Hard Plastic, Composite	31615A19	000000


		1/8"	1/2"	1/4"	2"	2	CNC Machine	Hard Plastic, Soft Plastic	36035A61	00000
		3/16"	5/8"	1/4"	2"	2	CNC Machine	Hard Plastic, Composite	31615A21	00000
		3/16"	5/8"	1/4"	2"	2	CNC Machine	Hard Plastic, Soft Plastic	36035A62	00000
		1/4"	3/4"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Composite	31615A22	00000
		1/4"	3/4"	1/4"	2 1/2"	1	CNC Machine	Hard Plastic, Soft Plastic	36035A52	00000
		1/4"	1"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	36035A63	00000
		5/16"	13/16"	3/8"	2 1/2"	2	CNC Machine	Hard Plastic, Composite	36035A71	00000
		3/8"	7/8"	3/8"	2 1/2"	2	CNC Machine	Hard Plastic, Composite	31615A23	00000
		3/8"	7/8"	3/8"	2 1/2"	1	CNC Machine	Hard Plastic, Soft Plastic	36035A53	00000
		1/2"	1"	1/2"	3"	2	CNC Machine	Hard Plastic, Composite	31615A24	000000


		1/2"	1"	1/2"	3"	1	CNC Machine	Hard Plastic, Soft Plastic	36035A54	000000




				Spiral Flutes with Upward Chip Removal

				1/8"	1/2"	1/8"	2"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N13	00000


				1/8"	1/2"	1/8"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	8782A31	00000
				1/8"	1/2"	1/4"	2"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N14	00000
				1/8"	3/4"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N15	00000
				3/16"	5/8"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N18	00000
				1/4"	3/8"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	8782A11	00000
				1/4"	3/8"	1/4"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N21	00000
				1/4"	3/4"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	8782A12	00000
				1/4"	7/8"	1/4"	3"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N22	00000
				1/4"	7/8"	1/4"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N23	00000
				1/4"	1"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N24	00000


				1/4"	1 1/4"	1/4"	3"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N25	00000
				3/8"	5/8"	3/8"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N27	00000
				3/8"	1 1/8"	3/8"	3"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N28	00000
				1/2"	1 1/8"	1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N31	000000




						Spiral Flutes with Downward Chip Removal

						1/8"	1/2"	1/8"	2"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N42	00000


						1/8"	1/2"	1/8"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	8782A32	00000
						1/8"	1/2"	1/4"	2"	2	CNC Machine	Hard Plastic, Soft Plastic	6361N43	00000
						1/4"	3/8"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	8782A21	00000
						1/4"	3/8"	1/4"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N46	00000
						1/4"	3/4"	1/4"	2 1/2"	2	CNC Machine	Hard Plastic, Soft Plastic	8782A22	00000
1/4"						7/8"	1/4"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N47	00000
3/8"	5/8"					3/8"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N48	00000
1/2"	1 1/8"					1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6361N49	000000


Square Cut Style—Plunge-Cut







						Spiral Flutes with Upward Chip Removal

						1/16"	1/4"	1/4"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N11	00000


						3/32"	1/4"	1/8"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N12	00000
						5/32"	9/16"	1/4"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N16	00000
						3/16"	5/8"	1/4"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N17	00000
						7/32"	3/4"	1/4"	2 1/2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N19	00000
						3/8"	5/8"	3/8"	2 1/2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N26	00000
						1/2"	1 1/4"	1/2"	3"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N29	000000




		Spiral Flutes with Downward Chip Removal

		1/16"	1/4"					1/8"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N41	00000


		5/32"	9/16"					1/4"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N44	00000
		3/16"	5/8"					1/4"	2"	1	CNC Machine	Hard Plastic, Soft Plastic	6361N45	00000

Ceramic-Coated Carbide

Straight Flute

Square Cut Style

Spiral Flute

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Spiral Flute—Bits with spiral flutes leave a smoother finish than straight-flute bits.

Downward Chip Removal—Bits with downward chip removal push chips down for applications that require a smooth finish on the cut's top edge.

1 Flute—Choose a bit with one flute for a faster cut; bits with more flutes produce a smoother finish.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style







	Straight Flutes

	1/8"	1/2"	1/4"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6413N11	000000


	3/16"	5/8"	1/4"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6413N12	00000




			Spiral Flutes with Upward Chip Removal

			1/16"	1/4"	1/8"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N11	00000


			1/8"	1/4"	1/4"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N12	00000
			1/8"	3/4"	1/8"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N13	00000
			1/4"	3/8"	1/4"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N14	00000
			1/4"	7/8"	1/4"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N15	00000
			1/4"	1"	1/4"	3"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N16	00000
			3/8"	1 1/8"	3/8"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N17	000000
			1/2"	1 1/8"	1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N18	000000
			1/2"	1 5/8"	1/2"	4"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N19	000000




					Spiral Flutes with Downward Chip Removal

					1/16"	1/4"	1/8"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N21	00000


					1/8"	1/2"	1/4"	2"	1	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N22	00000
					1/4"	7/8"	1/4"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N23	00000
					1/4"	1"	1/4"	3"	2	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N24	00000
					3/8"	1 1/8"	3/8"	3"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N25	000000
					1/2"	1 1/8"	1/2"	3 1/2"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N26	000000
					1/2"	1 5/8"	1/2"	4"	3	Hand Router, Router Table, CNC Machine	Hard Plastic, Soft Plastic	6537N27	000000

Router Bit Sets


Chamfering Cut Style	Corner Cut Style	Square Cut Style	Flush-Trimming Cut Style

Groove Cut Style	Hinge Mortise Cut Style	Joining Cut Style	Panel Groove Cut Style

Panel Pilot Cut Style

Keep a variety of router bits on hand to cut grooves, chamfers, and other detailed shapes into wood and plastic. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.

Flush-Trimming Cut Style—Flush-trimming bits cut layers of material flush to one another or make cuts along a template.

Hinge-Mortise Cut Style—Hinge-mortise bits create large, shallow recesses.

Joining Cut Style—Joining bits create shapes that fit together in order to form joints.

Panel-Pilot Cut Style—Panel-pilot bits have a pointed tip that creates starter holes for efficient plunge cutting in wood. To make precise cutouts, use the top of the tip as a pilot and guide the bit along a template placed below the workpiece.

	Shank Dia.	For Tool Type	For Use On		Each
Uncoated Carbide-Tipped High-Speed Steel







	Multipurpose

	6	Chamfering Corner Rounding Square Flush Trimming Joining	One Chamfer Router Bit: 1-5/16" Cutting Diameter One Flush-Trimming Router Bit: 3/8" Cutting Diameter One Dovetail Router Bit: 1/2" Cutting Diameter One Rounded-Corner Bit: 1/4" Cutting Diameter Two Square Router Bits: 1/4" and 1/2" Cutting Diameters	1/4"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N102	0000000


	6	Square	Six Square Router Bits: 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4" Cutting Diameters	1/4"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N103	00000
	10	Chamfering Corner Rounding Square Flush Trimming Groove Hinge Mortise Joining	One Chamfer Router Bit: 1-5/16" Cutting Diameter Two Rounded-Corner Bits: 1/4" and 3/8" Cutting Diameters One Flush-Trimming Router Bit: 1/2" Cutting Diameter One Rounded-Groove Router Bit: 1/4" Cutting Diameter One V-Groove Router Bit: 9/16" Cutting Diameter One Hinge-Mortise Router Bit: 1/2" Cutting Diameter One Dovetail Router Bit: 1/2" Cutting Diameter Two Square Router Bits: 1/4" and 3/4" Cutting Diameters	1/2"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N104	000000
	15	Chamfering Corner Rounding Square Flush Trimming Groove Joining	Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters One Cove Router Bit: 3/8" Cutting Diameter Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters One V-Groove Router Bit: 5/8" Cutting Diameter One Dovetail Router Bit: 9/16" Cutting Diameter One Roman Ogee Router Bit: 5/32" Cutting Diameter One Slotting Router Bit: 1-1/4" Cutting Diameter One Tongue-and-Groove Router Bit: 1-1/4" Cutting Diameter Three Square Router Bits: 1/4", 1/2", and 5/8" Cutting Diameters	1/4"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N105	000000
	30	Chamfering Corner Rounding Square Flush Trimming Groove Hinge Mortise Joining Panel Pilot	Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters One Beaded-Corner Router Bit: 1-1/16" Cutting Diameter One Wavy-Corner Router Bit: 1-1/4" Cutting Diameter Five Rounded-Corner Router Bits: 1/8", 1/4", 5/16", 3/8", and 1/2" Cutting Diameters Two Cove Router Bits: 7/8" and 1-1/8" Cutting Diameters One Dovetail Router Bit: 9/16" Cutting Diameter One Hinge-Mortise Router Bit: 1/2" Cutting Diameter One Panel-Pilot Router Bit: 5/16" Cutting Diameter Three Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters Two Rabbet Router Bits: 1-1/4" Cutting Diameter Two Rounded-Groove Router Bits: 1/2" and 3/4" Cutting Diameters Two V-Groove Router Bits: 5/8" Cutting Diameter Seven Square Router Bits: 5/32", 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4" Cutting Diameters	1/4"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N106	000000




			Cabinetmaking

			3	Joining Panel Groove	Two Lock Miter Router Bits: 1-5/8" Cutting Diameter One Roman Ogee Router Bit: 3-3/8" Cutting Diameter	1/2"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N112	000000




					Mortising

					3	Hinge Mortise	Three Hinge-Mortise Router Bits: 1/4", 1/2", and 3/4" Cutting Diameters	1/4"	Hand Router, Router Table	Plywood	6635N107	000000


					3	Hinge Mortise	Three Hinge-Mortise Router Bits: 1/4", 1/2", and 3/4" Cutting Diameters	1/2"	Hand Router, Router Table	Plywood	6635N108	000000




							Template Routing

							4	Flush Trimming	Four Flush-Trimming Router Bits: 1/4", 3/8", and 1/2" Cutting Diameters	1/4"	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	6635N101	000000




									Trimming, Edging

									6	Chamfering Corner Rounding Flush Trimming	Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters	1/4"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N109	00000




											Wood Joining

											2	Joining	Two Lock Miter Router Bits: 1-5/8" Cutting Diameter	1/2"	Hand Router, Router Table	Softwood, Hardwood, Plastic, Laminate, Composite	6635N111	000000

Straight and Spiral Router Bits for Aluminum

Also known as O-flute bits, the flutes on these bits are open and rounded for efficient chip removal when cutting aluminum. This also reduces heat to prevent melting or warping. Use these bits to create square slots, pockets, and edges. They are plunge cutting, letting you cut directly into the workpiece from above. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Uncoated High-Speed Steel


Square Cut Style—Plunge-Cut	Square Cut Style—Plunge-Cut, Straight Flute

High-speed steel bits can be used with hand routers, router tables, and CNC machines.

Straight Flute—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

1 Flute—Choose a bit with one flute for a faster cut.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Straight Flutes with Upward Chip Removal

	1/8"	1/2"	1/4"	2"	1	Hand Router, Router Table, CNC Machine	Aluminum	3317A12	000000


	3/16"	5/8"	1/4"	2 1/2"	1	Hand Router, Router Table, CNC Machine	Aluminum	3317A13	00000
	1/4"	3/4"	1/4"	2 1/2"	1	Hand Router, Router Table, CNC Machine	Aluminum	3317A14	00000
	1/2"	1"	1/2"	3"	1	Hand Router, Router Table, CNC Machine	Aluminum	3317A15	00000

Uncoated Carbide

Carbide bits have a longer life and faster cutting speeds than high-speed steel bits. Their extreme hardness makes them brittle, so they’re not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to keep bits from breaking.

Straight Flute—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Spiral Flute—Bits with spiral flutes leave a smoother finish than straight-flute bits and make plunge cuts more easily.

Downward Chip Removal—Bits with downward chip removal push chips down for applications that require a smooth finish on the cut's top edge.

1 Flute—Choose a bit with one flute for a faster cut.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Straight Flutes with Upward Chip Removal

	1/8"	1/2"	1/4"	2"	1	CNC Machine	Aluminum	3317A31	000000


	3/16"	5/8"	1/4"	2"	1	CNC Machine	Aluminum	3317A32	00000
	1/4"	3/4"	1/4"	2 1/2"	1	CNC Machine	Aluminum	3317A33	00000
	1/4"	1"	1/4"	3"	1	CNC Machine	Aluminum	3317A11	00000
	5/16"	13/16"	3/8"	2 1/2"	1	CNC Machine	Aluminum	3317A34	00000
	3/8"	7/8"	3/8"	2 1/2"	1	CNC Machine	Aluminum	3317A35	00000
	7/16"	1"	1/2"	3"	1	CNC Machine	Aluminum	3317A36	000000
	1/2"	1"	1/2"	3"	1	CNC Machine	Aluminum	3317A37	000000




			Spiral Flutes with Upward Chip Removal

			1/8"	1/4"	1/8"	1 1/2"	1	CNC Machine	Aluminum	3317A21	00000


			1/8"	1/2"	1/4"	2"	1	CNC Machine	Aluminum	3317A22	00000
			3/16"	3/8"	1/4"	2"	1	CNC Machine	Aluminum	3317A23	00000
			3/16"	5/8"	1/4"	2"	1	CNC Machine	Aluminum	3317A24	00000
			1/4"	3/8"	1/4"	2"	1	CNC Machine	Aluminum	3317A25	00000
			1/4"	1 1/4"	1/4"	3"	1	CNC Machine	Aluminum	3317A26	00000
			3/8"	3/4"	3/8"	3"	1	CNC Machine	Aluminum	3317A27	00000
			3/8"	1 1/8"	3/8"	3"	1	CNC Machine	Aluminum	3317A28	000000




					Spiral Flutes with Downward Chip Removal

					1/8"	1/4"	1/8"	1 1/2"	1	CNC Machine	Aluminum	3317A42	00000


					1/8"	1/4"	1/4"	2"	1	CNC Machine	Aluminum	3317A41	00000
					3/16"	3/8"	1/4"	2"	1	CNC Machine	Aluminum	3317A43	00000
					3/16"	5/8"	1/4"	2"	1	CNC Machine	Aluminum	3317A44	00000
					1/4"	3/8"	1/4"	2"	1	CNC Machine	Aluminum	3317A45	00000
					1/4"	1 1/4"	1/4"	3"	1	CNC Machine	Aluminum	3317A46	000000
					3/8"	1/8"	3/8"	3"	1	CNC Machine	Aluminum	3317A48	000000
					3/8"	3/4"	3/8"	3"	1	CNC Machine	Aluminum	3317A47	000000

Zirconium Nitride (ZrN)-Coated Carbide

Square Cut

Style—Plunge-Cut

Square Cut

Style—Plunge-Cut,

Spiral Flute

Zirconium-nitride (ZrN) coated carbide bits have a smoother cutting edge than uncoated bits, so they generate less friction when cutting. This helps keep temperatures down when cutting at high speeds, minimizing material buildup and extending the life of the bit. Carbide bits have a longer life and faster cutting speeds than high-speed steel bits. Their extreme hardness makes them brittle, so they’re not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to keep bits from breaking.

Spiral Flute—Bits with spiral flutes leave a smoother finish than straight-flute bits and make plunge cuts more easily.

2 Flutes—Bits with two flutes produce a smoother finish.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Spiral Flutes with Upward Chip Removal

	1/8"	1/4"	1/4"	2"	2	CNC Machine	Aluminum	3317A111	000000


	1/8"	1/2"	1/4"	2"	2	CNC Machine	Aluminum	3317A112	00000
	3/16"	1/2"	1/4"	2"	2	CNC Machine	Aluminum	3317A113	00000
	1/4"	5/8"	1/4"	2"	2	CNC Machine	Aluminum	3317A114	00000

Router Bits for Composites

The sharp cutting edges and flute shapes of these tools are specifically designed to cut through tough composite materials, such as carbon fiber and fiberglass, with minimal resistance. This means less strain on your router and more control when cutting, leading to smooth cuts. They're made of solid carbide for longer tool life and faster cutting speeds than high-speed steel.

Uncoated Carbide


Square Cut Style	Drill/Mill Cut Style—Plunge-Cut	Square Cut Style—Plunge-Cut


Square Cut Style, Diamond-Pattern Flutes	Square Cut Style, Trapezoid Pattern Flutes	Drill/Mill Cut Style—Plunge-Cut, Diamond-Pattern Flutes

Drill/Mill Cut Style—Plunge-Cut, Trapezoid Pattern Flutes	Square Cut Style—Plunge-Cut, Diamond-Pattern Flutes	Square Cut Style—Plunge-Cut, Trapezoid Pattern Flutes

Square Cut Style—Use bits with a square cut style to cut slots, pockets, and edges.

Drill/Mill Cut Style—Bits with a drill/mill cut style have a pointed end for easier plunge cuts than bits with a square cut style.

Plunge Cut—Plunge-cutting bits let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work, such as trimming, contouring, and finishing.

60° Compression Angle—The unique cutting angle and sharp edges slice through difficult material such as aramid. Often used in the aerospace industry to cut wings, rudders, and other structural components. They have upward and downward chip removal—acting similar to scissors, they move chips away from the top and bottom edges of the cut for a smooth finish on both.

Diamond-Pattern Flutes—Diamond-pattern flutes' small, staggered teeth aggressively cut, yet leave a smooth finish.

Trapezoid Pattern Flutes—Trapezoid-pattern flutes are like diamond-pattern flutes, but with overlapping cutting edges for an even smoother cut.

	Cutting Dia.	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style







		Diamond-Pattern Flutes

		1/16"	3/16"	1/8"	1 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N43	00000


		3/32"	5/16"	1/8"	1 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N44	0000
		1/8"	7/16"	1/8"	1 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N45	0000
		3/16"	5/8"	3/16"	2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N46	00000
		3/16"	5/8"	1/4"	2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N47	00000
		1/4"	3/4"	1/4"	2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N48	00000
		1/4"	3/4"	1/4"	2 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N49	00000
		5/16"	1"	5/16"	2 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N51	00000
		3/8"	1"	3/8"	2 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N52	00000
		1/2"	1"	1/2"	3"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N53	00000




				Trapezoid Pattern Flutes

				3/16"	1"	1/4"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N54	00000


				1/4"	1"	1/4"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N55	00000
				3/8"	1"	3/8"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N56	00000
				1/2"	1"	1/2"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N57	00000


				Drill/Mill Cut Style—Plunge-Cut







								Diamond-Pattern Flutes

								1/16"	3/16"	1/8"	1 1/2"	—	CNC Machine	Fiberglass, Composite	8785A41	00000


								3/32"	5/16"	1/8"	1 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N38	00000
								1/8"	1/2"	1/8"	1 1/2"	—	CNC Machine	Fiberglass, Composite	8785A42	00000
								3/16"	5/8"	3/16"	2"	—	CNC Machine	Fiberglass, Composite	8785A43	00000
								1/4"	3/4"	1/4"	2"	—	CNC Machine	Fiberglass, Composite	8785A44	00000
								1/4"	1"	1/4"	3"	—	CNC Machine	Fiberglass, Composite	8785A47	00000
								5/16"	1"	5/16"	2 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N39	00000
								3/8"	1"	3/8"	2 1/2"	—	CNC Machine	Fiberglass, Composite	8785A45	00000
								1/2"	1"	1/2"	3"	—	CNC Machine	Fiberglass, Composite	8785A46	00000




										Trapezoid Pattern Flutes

										3/16"	1"	1/4"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N58	00000


1/4"	1"									1/4"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N59	00000
3/8"	1"									3/8"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N61	00000
1/2"	1"									1/2"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N62	00000


Square Cut Style—Plunge-Cut







										Diamond-Pattern Flutes

										1/16"	3/16"	1/8"	1 1/2"	—	CNC Machine	Fiberglass, Composite	8785A21	00000


										3/32"	5/16"	1/8"	1 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N41	00000
										1/8"	1/2"	1/8"	1 1/2"	—	CNC Machine	Fiberglass, Composite	8785A22	00000
										1/8"	1/2"	1/8"	2"	—	CNC Machine	Carbon Fiber, Graphite, Composite	3334A11	000000
										3/16"	5/8"	3/16"	2"	—	CNC Machine	Carbon Fiber, Graphite, Composite	3334A12	000000
										3/16"	5/8"	3/16"	2"	—	CNC Machine	Fiberglass, Composite	8785A23	00000
		1/4"								3/4"	1/4"	2"	—	CNC Machine	Carbon Fiber, Graphite, Composite	3334A13	000000
		1/4"	3/4"							1/4"	2"	—	CNC Machine	Fiberglass, Composite	8785A24	00000
		1/4"	1 1/2"							1/4"	3"	—	CNC Machine	Carbon Fiber, Graphite, Composite	3334A14	000000
		5/16"	1"							5/16"	2 1/2"	—	Hand Router, Router Table, CNC Machine	Fiberglass, Composite	6582N42	00000
		3/8"	1"							3/8"	2 1/2"	—	CNC Machine	Fiberglass, Composite	8785A25	00000


		3/8"	1 1/8"							3/8"	3"	—	CNC Machine	Carbon Fiber, Graphite, Composite	3334A15	000000
		1/2"	1"							1/2"	3"	—	CNC Machine	Fiberglass, Composite	8785A26	00000
		1/2"	1 1/8"							1/2"	3 1/2"	—	CNC Machine	Carbon Fiber, Graphite, Composite	3334A16	000000
		1/2"	2 1/8"							1/2"	4"	—	CNC Machine	Carbon Fiber, Graphite, Composite	3334A17	000000




				Trapezoid Pattern Flutes

				3/16"	1"					1/4"	3"	—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N63	00000


				1/4"	1"	1/4"	3"			—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N64	00000
				3/8"	1"	3/8"	3"			—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N65	00000
				1/2"	1"	1/2"	3"			—	Hand Router, Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N66	00000




						60° Compression Spiral Flutes with Upward and Downward Chip Removal

						1/4"	3/4"			1/4"	2 1/2"	2	Router Table, CNC Machine	Aramid, Composite	6582N139	000000


						3/8"	3/4"			3/8"	3"	2	Router Table, CNC Machine	Aramid, Composite	6582N141	000000
						3/8"	2"			3/8"	4"	2	Router Table, CNC Machine	Aramid, Composite	6582N142	000000
						1/2"	1"			1/2"	3"	2	Router Table, CNC Machine	Aramid, Composite	6582N143	000000
						1/2"	2"			1/2"	4"	2	Router Table, CNC Machine	Aramid, Composite	6582N144	000000

Router Bits for Wood Joining

Create shapes that fit together to form wood joints commonly used to build doors and frames.

Rabbet Wood Joint—Uncoated Carbide-Tipped High-Speed Steel

Rabbet bits have a ball-bearing pilot that guides the bit for accurate cuts and produces less friction than solid pilots for smoother operation.

1 3/8" Cutting Diameter—Rabbet bits with 1 _3/8" cutting diameter include interchangeable bearings in a range of sizes to adjust the rabbet width.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1 1/4"	3/8"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3187A16	000000


	1 3/8"	1/8", 1/4", 5/16", 3/8", 7/16", 1/2"	1/2"	1/4"	2"	Ball Bearing	3/8", 1/2", 5/8", 3/4", 7/8", 1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3187A21	00000

Slotting Wood Joint—Uncoated Carbide-Tipped High-Speed Steel

Slotting bits have a ball-bearing pilot that guides the bit for accurate cuts and produces less friction than solid pilots for smoother operation.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1/16"	1 7/8"	1/4"	2 3/8"	Ball Bearing	7/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood	3447N13	000000


	1/8"	1 7/8"	1/4"	2 3/8"	Ball Bearing	7/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood	3447N11	00000
	1/4"	1 7/8"	1/4"	2 3/8"	Ball Bearing	7/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood	3447N12	00000

Wedge-Tongue Wood Joint—Uncoated Carbide-Tipped Steel

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1 1/4"	1 1/4"	1/2"	2 3/4"	1	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N12	000000

Wedge-Groove Wood Joint—Uncoated Carbide-Tipped Steel

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1/2"	1 1/4"	1/2"	2 3/4"	1	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N11	000000

Lock-Miter Wood Joint—Uncoated Carbide-Tipped Steel

Create right-angle and glue joints. Using a router table, create this two-piece joint by first cutting along the short edge of one piece of wood, then along the long edge of the other piece of wood.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	2 5/8"	1 3/16"	1/2"	2 5/8"	1	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N13	0000000

Dovetail Wood Joint—Uncoated Carbide-Tipped Steel

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1/2"	1/2"	1/4"	2"	1	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N14	000000


	1/2"	1/2"	1/2"	2 5/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N16	00000
	17/32"	1/2"	1/4"	1 7/8"	1	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N18	00000
	3/4"	3/4"	1/2"	3"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N17	00000
	1"	1"	1/2"	2 3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N15	00000

Drawer-Lock Wood Joint—Uncoated Carbide-Tipped Steel

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1"	1/2"	1/2"	1 5/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N19	000000

Tongue-and-Groove Wood Joint—Uncoated Carbide-Tipped Steel

Tongue and groove bits have a solid pilot that guides the bit while routing. Solid pilots are more durable than ball bearing bits. All other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts. To cut the tongue, use the fully assembled bit. To cut the groove, remove one of the two cutters and adjust the height of the bit.

	Overall Lg.	Router Bit Pilot Type	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1 7/8"	3/4"	1/4"	2 27/32"	Solid	4	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N21	000000


	1 7/8"	3/4"	1/2"	3 1/16"	Solid	3	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N22	00000

Keyhole Wood Joint—Uncoated Carbide-Tipped Steel

Keyhole joints are often used as wall-mounting slots.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	3/8"	7/16"	1/4"	1 9/16"	1	Hand Router, Router Table	Wood, Particleboard, Plywood	6471N23	000000

Chamfering Router Bits

Chamfering Cut Style

These bits make chamfer, bevel, and other angled cuts in wood.

Uncoated Carbide-Tipped High-Speed Steel

Chamfering

Cut Style,

Straight

Flutes, Ball

Bearing

Use carbide-tipped high-speed steel bits on wood. They're sturdier than carbide bits and can be used for hand routing. A ball-bearing pilot helps position the bit for straight cuts.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Chamfering Cut Style







	Straight Flutes

	5/8"	1/4"	15°	1/4"	2 1/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3224N11	000000


	3/4"	1/4"	25°	1/4"	2 1/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3224N12	00000
	7/8"	1/2"	25°	1/4"	1 7/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	35485A23	00000
	1"	1/2"	45°	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	35485A21	00000
	1"	5/8"	45°	1/2"	2 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	35485A22	00000

Uncoated Carbide

Chamfering Cut

Style, Straight

Flutes, Solid

Solid carbide bits offer the longest tool life and fastest cutting speeds, so they can be used on wood and laminate. A solid pilot guides the bit while routing. The extreme hardness of these bits makes them brittle, so they're not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	No. of Flutes	For Tool Type	For Use On		Each
Chamfering Cut Style







	Straight Flutes

	1/4"	1/4"	7°	1/4"	1 1/2"	Solid	1	CNC Machine	Wood, Laminate	35505A59	000000

Diamond-Coated Router Bits for Composites

With a diamond coating, these bits resist wear when used on abrasive materials, making them last about 50 times longer than uncoated bits. Their sharp cutting edges and flute shapes are specifically designed to cut through tough materials such as composites with minimal resistance. This means less strain on your router and more control when cutting, leading to a smooth cut. Bits are made of solid carbide for longer tool life and faster cutting speeds than high-speed steel.

Diamond-Coated Carbide


Square Cut Style	Drill/Mill Cut Style—Plunge-Cut	Square Cut Style—Plunge-Cut


Square Cut Style Straight Flutes	Square Cut Style Spiral Flute	Drill/Mill Cut Style—Plunge-Cut, Straight Flutes

Drill/Mill Cut Style—Plunge-Cut, Diamond-Pattern Flutes	Square Cut Style—Plunge-Cut, 30° Compression Angle, Herringbone Compression Flute	Square Cut Style—Plunge-Cut, Spiral Flute, 45° Compression Angle

Square Cut Style—Plunge-Cut, 60° Compression Angle, Spiral Flute	Square Cut Style—Plunge-Cut, Roughed Spiral Flute	Square Cut Style—Plunge-Cut, Diamond-Pattern Flutes

Square Cut Style—Use bits with a square cut style to cut slots, pockets, and edges.

Drill/Mill Cut Style—Bits with a drill/mill cut style have a pointed end for easier plunge cuts than square-cut bits.

Plunge Cut—Plunge-cutting bits let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Spiral Flute—Bits with spiral flutes leave a smoother finish than straight-flute bits and make plunge cuts more easily (for plunge-cutting bits).

Roughed Spiral Flute—Nicks on the edges of the spirals reduce the amount of force required to cut through composites, giving you more control as you cut.

Diamond-Pattern Flutes—Diamond-pattern flutes' small, staggered teeth aggressively cut, yet leave a smooth finish.

Herringbone Compression Flute—Herringbone-compression flutes have both upward and downward spiral flutes in an alternating pattern. This quickly and effectively clears chips, which prevents overheating and produces clean cuts.

Upward and Downward Chip Removal—Bits with upward and downward chip removal are also known as compression bits. Acting similar to scissors, they move chips away from the top and bottom edges of the cut for a smooth finish on both. Bits with higher compression angles cut more efficiently than bits with lower compression angles, reducing the amount of force required to cut through your material. They are also more resistant to wear.

	Cutting Dia.	Lg. of Cut	Shank Dia.	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style







				Straight Flutes

				1/4"	3/4"	1/4"	2 1/2"	10	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N11	0000000


				3/8"	1"	3/8"	3"	14	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N12	000000
				1/2"	1 1/4"	1/2"	3 1/2"	15	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N13	000000
				5/8"	1 5/8"	5/8"	4"	15	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N14	000000
				4 mm	10 mm	6 mm	57 mm	6	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N19	000000
				6 mm	15 mm	6 mm	65 mm	8	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N21	000000
				8 mm	20 mm	8 mm	75 mm	10	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N22	000000
				10 mm	25 mm	10 mm	80 mm	12	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N23	000000
				12 mm	32 mm	12 mm	93 mm	14	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N24	000000




						Spiral Flutes with Upward Chip Removal

						1/4"	3/4"	1/4"	2 1/2"	8	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N104	000000


						1/4"	1"	1/4"	3"	8	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N105	000000
						3/8"	1 1/8"	3/8"	3"	12	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N106	000000
						3/8"	1 1/2"	3/8"	3"	12	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N107	000000
						1/2"	1 1/2"	1/2"	4"	14	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N108	000000
						1/2"	2"	1/2"	4"	14	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N109	000000




								Diamond-Pattern Flutes

								1/8"	1/4"	1/8"	1 1/2"	6	Router Table, CNC Machine	Carbon Fiber, Composite	6582N67	00000


								3/16"	3/8"	3/16"	2"	6	Router Table, CNC Machine	Carbon Fiber, Composite	6582N68	000000
								1/4"	1/2"	1/4"	2 1/2"	8	Router Table, CNC Machine	Carbon Fiber, Composite	6582N69	000000
								1/4"	3/4"	1/4"	2 1/2"	8	Router Table, CNC Machine	Carbon Fiber, Composite	6582N71	000000
								1/4"	3/4"	1/4"	2 1/2"	10	Router Table, CNC Machine	Carbon Fiber, Composite	6582N72	000000
								1/4"	3/4"	1/4"	2 1/2"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N73	000000
								1/4"	1"	1/4"	3"	8	Router Table, CNC Machine	Carbon Fiber, Composite	6582N76	000000
								1/4"	1"	1/4"	3"	10	Router Table, CNC Machine	Carbon Fiber, Composite	6582N77	000000
								1/4"	1"	1/4"	3"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N78	000000
								1/4"	1 1/4"	1/4"	4"	8	Router Table, CNC Machine	Carbon Fiber, Composite	6582N79	000000
								3/8"	3/4"	3/8"	2 1/2"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N81	000000


								3/8"	1 1/8"	3/8"	3"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N83	000000
								3/8"	1 1/2"	3/8"	4"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N84	000000
								1/2"	1"	1/2"	3"	14	Router Table, CNC Machine	Carbon Fiber, Composite	6582N86	000000
								1/2"	2"	1/2"	4"	16	Router Table, CNC Machine	Carbon Fiber, Composite	6582N87	000000


								Drill/Mill Cut Style—Plunge-Cut







		Straight Flutes

		1/4"	3/4"							1/4"	2 1/2"	10	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N15	000000


		3/8"	1"							3/8"	3"	14	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N16	000000
		1/2"	1 1/4"							1/2"	3 1/2"	15	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N17	000000
		5/8"	1 5/8"							5/8"	4"	15	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N18	000000
		4 mm	12 mm							4 mm	55 mm	6	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N32	000000
		6 mm	18 mm							6 mm	65 mm	8	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N33	000000
		8 mm	24 mm							8 mm	75 mm	10	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N34	000000
		10 mm	30 mm							10 mm	80 mm	12	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N35	000000
		12 mm	36 mm							12 mm	93 mm	14	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N36	000000
		16 mm	48 mm							16 mm	108 mm	14	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N37	000000




				Diamond-Pattern Flutes

				1/4"	1"					1/4"	3"	8	Router Table, CNC Machine	Carbon Fiber, Composite	6582N99	000000


				1/4"	1"					1/4"	3"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N101	000000
				3/8"	1 1/4"					3/8"	3"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N102	000000
				1/2"	1"					1/2"	3"	14	Router Table, CNC Machine	Carbon Fiber, Composite	6582N103	000000


				Square Cut Style—Plunge-Cut







										Straight Flutes

										4 mm	10 mm	6 mm	57 mm	6	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N25	000000


										6 mm	15 mm	6 mm	65 mm	8	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N26	000000
										8 mm	20 mm	8 mm	75 mm	10	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N27	000000
										10 mm	25 mm	10 mm	80 mm	12	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N28	000000
										12 mm	32 mm	12 mm	93 mm	14	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N29	000000
										16 mm	34 mm	16 mm	108 mm	14	CNC Machine	Fiber-Reinforced Plastic, Composite	6582N31	000000




												Diamond-Pattern Flutes

												1/8"	3/8"	1/8"	1 1/2"	6	Router Table, CNC Machine	Carbon Fiber, Composite	6582N88	00000


												1/8"	1/2"	1/8"	1 1/2"	8	Router Table, CNC Machine	Carbon Fiber, Composite	6582N89	00000
												3/16"	9/16"	3/16"	2"	6	Router Table, CNC Machine	Carbon Fiber, Composite	6582N91	000000
												3/16"	3/4"	3/16"	2"	8	Router Table, CNC Machine	Carbon Fiber, Composite	6582N92	000000
												1/4"	3/4"	1/4"	2 1/2"	10	Router Table, CNC Machine	Carbon Fiber, Composite	6582N93	000000
												1/4"	1"	1/4"	3"	10	Router Table, CNC Machine	Carbon Fiber, Composite	6582N94	000000
								5/16"				1"	5/16"	2 1/2"	10	Router Table, CNC Machine	Carbon Fiber, Composite	6582N95	000000
								3/8"	1 1/8"			3/8"	3"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N96	000000
3/8"								1 1/2"	3/8"			4"	12	Router Table, CNC Machine	Carbon Fiber, Composite	6582N97	000000
1/2"	1"							1/2"	3"			14	Router Table, CNC Machine	Carbon Fiber, Composite	6582N98	000000




								Roughed Spiral Flutes with Upward Chip Removal

								15/64"	3/4"			1/4"	2 1/2"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N111	000000


								1/4"	1/2"			1/4"	2 1/2"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N112	000000
								1/4"	3/4"			1/4"	2 1/2"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N113	000000
								1/4"	1"			1/4"	3"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N114	000000
								5/16"	15/16"			3/8"	3"	6	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N115	000000
								23/64"	1 1/8"			3/8"	3"	6	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N116	000000
								3/8"	3/4"			3/8"	3"	6	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N117	000000
								3/8"	1 1/8"			3/8"	3"	6	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N118	000000
		7/16"						1 5/16"	1/2"			3"	8	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N119	000000
		31/64"	1 1/2"					1/2"	3"			8	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N121	000000
		1/2"	1"					1/2"	3"			8	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N122	000000


		1/2"	1 1/2"					1/2"	3"			8	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N123	000000




								45° Compression Angle Spiral Flutes with Upward and Downward Chip Removal

								1/4"	3/4"			1/4"	3"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N124	000000


				3/8"	3/4"			3/8"	3"			4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N125	000000
				3/8"	2"			3/8"	4"			4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N126	000000
				1/2"	1"			1/2"	3"			4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N127	000000
				1/2"	2"	1/2"		4"	4			Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N128	000000




						60° Compression Spiral Flutes with Upward and Downward Chip Removal

						1/4"	3/4"	1/4"	3"			2	Router Table, CNC Machine	Carbon Fiber, Fiber-Reinforced Plastic, Fiberglass, Composite	6582N129	000000


						3/8"	3/4"	3/8"	3"			2	Router Table, CNC Machine	Carbon Fiber, Fiber-Reinforced Plastic, Fiberglass, Composite	6582N131	000000
						3/8"	2"	3/8"	4"			2	Router Table, CNC Machine	Carbon Fiber, Fiber-Reinforced Plastic, Fiberglass, Composite	6582N132	000000
						1/2"	1"	1/2"	3"			2	Router Table, CNC Machine	Carbon Fiber, Fiber-Reinforced Plastic, Fiberglass, Composite	6582N133	000000
						1/2"	2"	1/2"	4"			2	Router Table, CNC Machine	Carbon Fiber, Fiber-Reinforced Plastic, Fiberglass, Composite	6582N134	000000




								30° Compression Angle Herringbone Compression Flutes with Upward and Downward Chip Removal

								1/8"	9/16"	1/8"	1 1/2"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N135	00000


								1/4"	3/4"	1/4"	2 1/2"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N136	000000
								3/8"	7/8"	3/8"	3"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N137	000000
								1/2"	1 1/2"	1/2"	3"	4	Router Table, CNC Machine	Carbon Fiber, Fiberglass, Composite	6582N138	000000

Router Bits for Grooves

Carve grooves in wood and laminate. These bits have straight flutes that quickly remove material, leaving a rough finish. Made of carbide-tipped high-speed steel, they provide a longer tool life and faster cutting speeds than standard high-speed steel bits.

Uncoated Carbide-Tipped High-Speed Steel


V-Shaped Grooves	V-Shaped Grooves (Top Pilot)	Rounded Grooves	Rounded Grooves (Top Pilot)


V-Shaped Grooves	V-Shaped Grooves (Top Pilot)	Rounded Grooves	Rounded Grooves (Top Pilot)

Top Pilot—Bits with a top pilot let you flush trim, cutting a lower layer of the workpiece flush to the layer above. They can also be used for pattern cutting with a template. They have a ball-bearing pilot that guides the bit for accurate cuts. All other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
V-Shaped Grooves







	Straight Flutes

	3/8"	7/16"	90°	1/4"	1 5/8"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	3324N11	000000


	1/2"	1/2"	90°	1/4"	1 5/8"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	3324N12	00000
	1/2"	5/8"	60°	1/4"	1 3/4"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	3324N13	00000
	1"	3/4"	90°	1/2"	2 1/4"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	3324N14	00000
	1"	7/8"	60°	1/2"	3 1/2"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	3324N15	00000


	V-Shaped Grooves (Top Pilot)







					Straight Flutes

					1/2"	1/2"	90°	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3324N111	00000


					Rounded Grooves







									Straight Flutes

									1/4"	1/4"	—	1/4"	1 5/8"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	6559N14	00000


									1/2"	3/8"	—	1/4"	1 1/2"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	6559N15	00000
									5/8"	7/16"	—	1/4"	1 9/16"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	6559N16	00000
									3/4"	1 1/4"	—	1/2"	2 3/4"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	6559N12	00000
									1"	1 1/4"	—	1/2"	2 3/4"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	6559N13	00000


									Rounded Grooves (Top Pilot)







													Straight Flutes

													1/2"	3/8"	—	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	6559N11	00000

Straight and Spiral Router Bits for Foam

The cutting edges of these bits have a shallow angle to carve foam quickly and accurately. With a square cut style, they create slots, pockets, and edges. These bits are good for plunge cutting, letting you cut directly into the workpiece from above. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Uncoated High-Speed Steel


Square Cut Style—Plunge-Cut	Square Cut Style—Plunge-Cut, V Flutes

High-speed steel bits are for general purpose use. They can be used with hand tools, router tables, and CNC machines.

V Flutes—V flutes are evenly balanced to create a smooth finish when using a hand router.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	V Flutes

	1/4"	3/4"	1/4"	2 1/8"	2	Hand Router, Router Table, CNC Machine	Foam	6602N11	000000


	1/4"	1"	1/4"	3 1/4"	2	Hand Router, Router Table, CNC Machine	Foam	6602N12	00000
	1/4"	1"	1/2"	2 1/2"	2	Hand Router, Router Table, CNC Machine	Foam	6602N13	00000
	3/8"	1"	3/8"	2 1/2"	2	Hand Router, Router Table, CNC Machine	Foam	6602N14	00000
	1/2"	1 1/4"	1/2"	2 3/4"	2	Hand Router, Router Table, CNC Machine	Foam	6602N15	00000

Uncoated Carbide

Square Cut

Style—Plunge-Cut

Square Cut

Style—Plunge-Cut,

Spiral Flute

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking.

Spiral Flute—Bits with spiral flutes leave a smoother finish than V-flute bits and make plunge cuts more easily.

Downward Chip Removal—Bits with downward chip removal push chips down for applications that require a smooth finish on the cut's top edge.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Spiral Flutes with Upward Chip Removal

	1/8"	1 1/8"	1/4"	2 1/2"	2	CNC Machine	Foam	2927N12	000000


	3/16"	1 5/8"	3/16"	4"	2	CNC Machine	Foam	2927N13	00000
	1/4"	2 1/4"	1/4"	4"	2	CNC Machine	Foam	2927N11	00000
	1/4"	3"	1/4"	6"	2	CNC Machine	Foam	2927N111	000000
	3/8"	4"	3/8"	6"	2	CNC Machine	Foam	2927N112	000000




			Spiral Flutes with Downward Chip Removal

			1/8"	1 1/16"	1/8"	3"	2	CNC Machine	Foam	2927N14	00000


			1/4"	2 1/4"	1/4"	4"	2	CNC Machine	Foam	2927N15	00000

Ceramic-Coated Carbide

Square Cut

Style—Plunge-Cut

Square Cut

Style—Plunge-Cut,

Spiral Flute

Ceramic-coated carbide bits have a coating that increases the hardness of the bits and protects them from high heat, making them last about 2.5 times longer than uncoated bits. Use carbide bits for longer tool life and faster cutting speeds than high-speed steel. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking.

Spiral Flute—Bits with spiral flutes leave a smoother finish than V-flute bits and make plunge cuts more easily.

Downward Chip Removal—Bits with downward chip removal push chips down for applications that require a smooth finish on the cut's top edge.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style—Plunge-Cut







	Spiral Flutes with Upward Chip Removal

	1/8"	1 1/8"	1/4"	2 1/2"	2	CNC Machine	Foam	2927N113	000000


	1/4"	2 1/4"	1/4"	4"	2	CNC Machine	Foam	2927N114	00000




			Spiral Flutes with Downward Chip Removal

			1/8"	1 1/8"	1/4"	2 1/2"	2	CNC Machine	Foam	2927N115	00000


			1/4"	2 1/4"	1/4"	4"	2	CNC Machine	Foam	2927N116	00000

Fast-Cut Router Bits

Quickly make smooth plunge cuts—the staggered flute design, drill/mill cut style, and carbide coating on these bits let them cut at higher speeds than other router bits. Staggered flutes combine the fast chip clearing and cutting speeds of straight flutes with the smooth finish of spiral flutes. The flute switches sides halfway up the shaft, making the bit more balanced and better at producing clean finishes than standard router bits. These bits have a pointed end, making downward plunge cuts easy.

Made of carbide-tipped high-speed steel, these bits provide faster cutting speeds and a longer tool life than standard high-speed steel bits. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Uncoated Carbide-Tipped High-Speed Steel

Image of ProductInUse. Front orientation. Drill/Mill Cut Style. Fast-Cut Router Bits .

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Drill/Mill Cut Style—Plunge-Cut







	Staggered Flutes

	1/2"	2 3/16"	1/2"	4 1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	6553N101	000000

Spiral Router Bits for Steel and Stainless Steel

The aluminum-titanium-nitride (AlTiN) coating on these bits resists heat and wear when cutting steel and stainless steel. They have a square cut style for creating slots, pockets, and edges. They're made of solid carbide for longer tool life and faster cutting speeds than high-speed steel. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking. With spiral flutes, they leave a smoother finish than straight-flute bits and are good for making plunge cuts. The flutes lift chips up from the workpiece for applications that require a smooth finish on the bottom edge of the cut. Securely clamp your material before routing to prevent lifting. Bits with more flutes produce a smoother finish.

Aluminum Titanium Nitride (AlTiN)-Coated Carbide

Image of ProductInUse. Front orientation. Router Bits. Spiral Router Bits for Steel and Stainless Steel , Aluminum Titanium Nitride (AlTiN)-Coated Carbide.


Square Cut Style Spiral Flute 4 Flutes	Square Cut Style Spiral Flute 2 Flutes

Square Cut Style Spiral Flute 3 Flutes

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Square Cut Style







	Spiral Flutes with Upward Chip Removal

	1/32"	1/16"	1/8"	1 1/2"	4	CNC Machine	Steel, Stainless Steel	3324A201	000000


	1/16"	3/16"	1/8"	1 1/2"	4	CNC Machine	Steel, Stainless Steel	3324A203	00000
	1/16"	3/16"	1/8"	1 1/2"	2	CNC Machine	Steel, Stainless Steel	3324A202	00000
	1/8"	1/4"	1/8"	2"	2	CNC Machine	Steel, Stainless Steel	3324A11	00000
	1/8"	3/8"	1/4"	1 1/2"	4	CNC Machine	Steel, Stainless Steel	3324A205	00000
	1/8"	3/8"	1/4"	1 1/2"	3	CNC Machine	Steel, Stainless Steel	3324A204	00000
	3/16"	3/8"	3/16"	2 1/2"	2	CNC Machine	Steel, Stainless Steel	3324A12	00000
	3/16"	7/16"	1/4"	1 7/8"	3	CNC Machine	Steel, Stainless Steel	3324A206	00000
	1/4"	3/8"	1/4"	2 1/2"	2	CNC Machine	Steel, Stainless Steel	3324A13	00000
	1/4"	5/8"	1/4"	2 3/8"	4	CNC Machine	Steel, Stainless Steel	3324A208	00000
	1/4"	5/8"	1/4"	2 3/8"	3	CNC Machine	Steel, Stainless Steel	3324A207	00000


	1/4"	1 1/8"	1/4"	3"	4	CNC Machine	Steel, Stainless Steel	3324A209	00000
	5/16"	1 1/8"	5/16"	3"	2	CNC Machine	Steel, Stainless Steel	3324A211	00000
	3/8"	1/2"	3/8"	3"	2	CNC Machine	Steel, Stainless Steel	3324A14	00000
	1/2"	3/4"	1/2"	3"	2	CNC Machine	Steel, Stainless Steel	3324A212	00000

Drill/Mill Router Bits

Drill, mill, and trim with the same bit. The unique shape on these bits was originally used for aircraft panels. They have a pointed end and spiral flutes, like a drill bit, making downward plunge cuts easier than with square-cut and straight-flute bits. The spiral flutes also leave a smoother finish. The flutes lift chips up from the workpiece for applications that require a clean finish on the bottom edge of the cut. Securely clamp your material before routing to prevent lifting.

These bits are made of high-speed steel for general purpose use. They can be used with hand tools, router tables, and CNC machines. These bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Uncoated High-Speed Steel

Drill/Mill Cut

Style—Plunge-Cut

4 Flutes—Bits with four flutes produce a smoother finish than three-flute bits.

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Drill/Mill Cut Style—Plunge-Cut







	Spiral Flutes with Upward Chip Removal

	3/32"	13/16"	3/32"	2"	3	Hand Router, Router Table, CNC Machine	Cast Iron, Copper, Steel, Stainless Steel, Titanium	6518N104	000000


	1/8"	7/8"	1/8"	2 1/4"	3	Hand Router, Router Table, CNC Machine	Cast Iron, Copper, Steel, Stainless Steel, Titanium	6518N101	00000
	5/32"	1 1/16"	3/16"	2 1/2"	3	Hand Router, Router Table, CNC Machine	Cast Iron, Copper, Steel, Stainless Steel, Titanium	6518N102	00000
	7/32"	1 1/4"	1/4"	2 3/4"	4	Hand Router, Router Table, CNC Machine	Cast Iron, Copper, Steel, Stainless Steel, Titanium	6518N103	00000

Ball-End Router Bits

For smooth contour carving in wood, plastic, and aluminum, these bits have a ball-nose design. All are made of solid carbide for a long tool life and fast cutting speeds. The extreme hardness of carbide bits means they are brittle, so they're not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking. The spiral flutes pull chips up from the workpiece while making cuts; securely clamp your material before routing to prevent lifting.

Uncoated Carbide

Ball Cut Style

	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Ball Cut Style







	Spiral Flutes with Upward Chip Removal

	1/8"	1/2"	1/4"	2"	2	CNC Machine	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Aluminum	8793A21	000000


	3/16"	3/4"	1/4"	2"	2	CNC Machine	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Aluminum	8793A22	00000
	1/4"	7/8"	1/4"	2 1/2"	2	CNC Machine	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Aluminum	8793A23	00000
	3/8"	1 1/8"	3/8"	3"	2	CNC Machine	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Aluminum	8793A24	00000
	1/2"	1 1/8"	1/2"	3"	2	CNC Machine	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Aluminum	8793A25	000000

Flush-Trimming and Chamfering Router Bits

Create straight and chamfering cuts on countertops or other laminate material without changing bits. For flush trimming, hold the bit at a height where only the straight cutting edge contacts the workpiece. For chamfering cuts, use the angled cutting edge. A ball-bearing pilot guides the bit for accurate cuts and produces low friction for smooth operation. The straight flutes quickly remove material and leave a rough finish. These bits cannot make plunge cuts, so they're best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.

Uncoated Carbide-Tipped High-Speed Steel


Chamfering Cut Style	Flush-Trimming Cut Style

Carbide-tipped high-speed steel bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Chamfering Cut Style and Flush-Trimming Cut Style







	Straight Flutes

	1/2"	3/8"	22°	1/4"	2"	Ball Bearing	1/2"	2	Hand Router	Laminate	35465A63	000000

Uncoated Micrograin Carbide


Chamfering Cut Style	Flush-Trimming Cut Style

Micrograin carbide bits provide superior wear resistance, long tool life, and a cleaner finish than bits made of other materials.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Chamfering Cut Style and Flush-Trimming Cut Style







	Straight Flutes

	3/4"	3/8"	9°	1/4"	2"	Ball Bearing	5/8"	3	Hand Router, Router Table, CNC Machine	Laminate	6589N12	000000


	7/8"	3/8"	22°	1/4"	2"	Ball Bearing	5/8"	3	Hand Router, Router Table, CNC Machine	Laminate	6589N11	00000

Decorative Panel Router Bits

Remove large amounts of material on flat surfaces with these bits to create raised panels with decorative edges. They are often used in cabinetry and furniture making. Since they’re made from solid carbide, they have a longer tool life and faster cutting speeds than high-speed steel bits.

Uncoated Carbide


Cove Panel Groove	Roman Ogee Panel Groove	Traditional Sloped Panel Groove

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation. For bits without a pilot, guide your router along a straight edge when hand routing to make accurate cuts.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Cove Panel Groove







	Straight Flutes

	1 1/8"	1/4"	1 5/8"	1/2"	3 1/8"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N11	000000


	Roman Ogee Panel Groove







					Straight Flutes

					2 1/2"	3/4"	2 1/2"	1/2"	2 13/16"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N12	000000


					3 3/8"	7/8"	3 3/8"	1/2"	2 29/32"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N13	000000


					Traditional Sloped Panel Groove







									Straight Flutes

									1 1/8"	1 5/8"	1 5/8"	1/2"	3 1/8"	—	—	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N14	00000


									1 5/8"	1/2"	1 5/8"	1/2"	2 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N15	00000

Straight Router Bits for Ceramics

With a diamond coating, these bits resist wear when used on ceramics and other highly abrasive material. All have a square cut style for creating slots, pockets, and edges. They do not have a pilot, so guide your router along a straight edge when hand routing to ensure straight, accurate cuts.

Diamond-Coated High-Speed Steel

	Overall Lg.	For Tool Type	For Use On		Each
Square Cut Style







	Fluteless

	1/8"	1/2"	1/8"	2"	Hand Router, Router Table, CNC Machine	Ceramic	8796A11	000000


	1/4"	3/4"	1/4"	2 1/2"	Hand Router, Router Table, CNC Machine	Ceramic	8796A12	00000
	3/8"	1"	3/8"	3"	Hand Router, Router Table, CNC Machine	Ceramic	8796A13	00000
	1/2"	1 1/2"	1/2"	4"	Hand Router, Router Table, CNC Machine	Ceramic	8796A14	000000
	3/4"	1"	1/2"	4"	Hand Router, Router Table, CNC Machine	Ceramic	8796A15	000000

Panel Pilot Router Bits

The pointed tip creates starter holes for efficient plunge cutting in wood. For precise cutouts, use the tip as a pilot and guide the bit along a template placed below the workpiece.

Uncoated High-Speed Steel


Panel Pilot Cut Style	Panel-Pilot Cut Style, Spiral Flutes

Spiral Flutes—Bits with spiral flutes leave a smoother finish than straight-flute bits and make plunge cuts more easily. They're made of high-speed steel and can be used with hand tools, router tables, and CNC machines.

	Overall Lg.	Router Bit Pilot Type	No. of Flutes	For Tool Type	For Use On		Each
Panel-Pilot Cut Style







	Spiral Flutes

	1/4"	5/8"	1/4"	2 3/4"	Solid	1	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3190A201	000000


	1/2"	1 1/4"	1/2"	3 13/16"	Solid	1	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3190A203	00000
	1/2"	2 1/8"	1/2"	4 1/2"	Solid	1	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3190A202	00000

Uncoated Carbide-Tipped High-Speed Steel


Panel Pilot Cut Style	Panel-Pilot Cut Style, Straight Flutes

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.

	Overall Lg.	Router Bit Pilot Type	No. of Flutes	For Tool Type	For Use On		Each
Panel-Pilot Cut Style







	Straight Flutes

	1/4"	3/4"	1/4"	2 9/16"	Solid	1	Hand Router	Wood, Particleboard, Plywood	3190A11	000000


	3/8"	1"	3/8"	3"	Solid	1	Hand Router	Wood, Particleboard, Plywood	3190A12	00000
	1/2"	1 3/16"	1/2"	3 1/2"	Solid	1	Hand Router	Wood, Particleboard, Plywood	3190A13	00000

Hinge and Lock Mortise Router Bits

Arbor

Use these bits to create large, shallow recesses in wood, such as mortises for hinge leaves or locks. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Uncoated Carbide-Tipped High-Speed Steel


Hinge Mortise Cut Style	Lock-Mortise Cut Style

Hinge-Mortise Cut

Style

Lock-Mortise

Cut Style

Hinge-Mortise Cut Style—Hinge-mortise bits create shallow recesses.

Lock-Mortise Cut Style—Lock-mortise bits create deeper recesses for bulky lock hardware to ensure doors close flush. They require an arbor (sold separately) to connect them to your router.

	Bits									Arbors
	Cutting Dia.	Lg. of Cut	Shank Dia.	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each		Each
Hinge-Mortise Cut Style







				Straight Flutes

				1/2"	3/4"	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3794A41	000000	———	0


				3/4"	3/4"	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3794A42	00000	———	0


				Lock-Mortise Cut Style







								Straight Flutes

								3/4"	1/2"	1/4"	3/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3794A201	00000	3794A204	000000


								1"	1/2"	1/4"	1"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3794A202	00000	3794A204	00000
								1 1/4"	5/8"	1/4"	1 1/4"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	3794A203	00000	3794A204	00000

Router Bits for Thin Materials

Make shallow incisions in fabric, leather, and rubber. Unlike other router bits, these bits do not spin or rotate; instead, the blade follows the motion of the CNC machine, behaving like a rudder as it cuts through material. These bits are plunge cutting, letting you cut directly into the workpiece from above.

Uncoated Carbide


Drag Knife Cut Style

Carbide bits have a small, sharp point for cutting precise, thin lines. They’re spring loaded to apply constant pressure to the tip, making them good for cutting thinner materials than steel bits.

	Shank Dia.	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
Drag Knife Cut Style







	Straight Flutes

	1/64"	1/32"	45°, 60°	1/4"	2 1/4"	1	CNC Machine	Fabric, Leather, Paper, Rubber, Vinyl Plastic	8127N16	0000000

Replacement Router Bit Blades

Uncoated Steel


Drag Knife Cut Style

Steel bits use a utility-knife blade; the larger blade cuts through thicker materials than carbide bits.

	Overall Lg.	No. of Flutes	Heat Treatment	For Tool Type	For Use On		Each
Drag Knife Cut Style







	Straight Flutes

	1/16"	1/16"	1/4"	3 1/4"	1	Hardened	CNC Machine	Fabric, Leather, Paper, Rubber, Vinyl Plastic	8127N13	0000000


	1/16"	1/16"	1/2"	4 1/2"	1	Hardened	CNC Machine	Fabric, Leather, Paper, Rubber, Vinyl Plastic	8127N11	000000
	1/8"	1/4"	1/4"	3 1/2"	1	Hardened	CNC Machine	Fabric, Leather, Paper, Rubber, Vinyl Plastic	8127N14	000000
	1/8"	1/4"	1/2"	4 3/8"	1	Hardened	CNC Machine	Fabric, Leather, Paper, Rubber, Vinyl Plastic	8127N12	000000
	4 1/4"	1/2"	1/2"	4 3/4"	1	Hardened	CNC Machine	Fabric, Leather, Paper, Rubber, Vinyl Plastic	8127N15	000000

Replacement Blades

Engraving Router Bits

A fine-point diamond tip precisely cuts lettering, numbering, and grade marks in materials such as aluminum, steel, copper, and granite. These bits also work on plastics such as polyethylene, polycarbonate, and vinyl. They’re spring loaded to apply constant pressure to the tip.

Uncoated Diamond-Tipped Stainless Steel

Engraving Cut Style

Replacement 120° Cut Angle Tips—Use 90° cut angle tips (sold separately) to engrave the finest details.

	Bits									Replacement 120° Cut Angle Tips		90° Cut Angle Tips
	Cutting Dia.	Lg. of Cut	Cut Angle	Shank Dia.	Overall Lg.	For Tool Type	For Use On		Each		Each		Each
Engraving Cut Style







				Fluteless

				0.005"	1/32"	120°	1/4"	3 3/4"	CNC Machine	Wood, Hard Plastic, Aluminum, Copper, Steel, Granite, Glass, Plastic, Foam	6456N11	0000000	6456N14	000000	6456N13	000000


				0.005"	1/32"	120°	1/2"	3 3/4"	CNC Machine	Wood, Hard Plastic, Aluminum, Copper, Steel, Granite, Glass, Plastic, Foam	6456N12	000000	6456N14	00000	6456N13	00000

Router Bits for Making Corners in Honeycomb Panels

Cut V-shaped grooves into aluminum honeycomb panels, so you can fold the panels 90°. These bits are useful for bending panels to create partitions and storage cabinets. Also known as double-edge folding router bits.

Uncoated Carbide-Tipped Tool Steel


Router Bit Shown Making V-Groove Cut in Aluminum Panel

	Shank Dia.	Overall Lg.	No. of Flutes	For Tool Type	For Use On		Each
V-Shaped Grooves







	Straight Flutes

	1/2"	3/8"	90°	1/4"	2"	2	Hand Router, Router Table, CNC Machine	Aluminum Honeycomb	6598N101	000000


	1/2"	3/8"	90°	1/2"	2"	2	Hand Router, Router Table, CNC Machine	Aluminum Honeycomb	6598N102	00000
	3/4"	1/2"	90°	1/4"	2 1/8"	2	Hand Router, Router Table, CNC Machine	Aluminum Honeycomb	6598N103	00000

Blade				Pkg. of 5		Pkg. of 100
Lg.	Wd.	Thk.	Edge		Pkg.		Pkg.



	2 3/8"	3/4"	0.025"	Straight	38755A22	00000	38755A23	000000