Filter by
Cut Type
For Use On
Cutting Direction
Shank Type
Groove Width
Maximum Hole Depth
Overall Length
Length
Manufacturer
DFARS Specialty Metals
Carbide-Tipped Turning Lathe Tools
Style A, Right Hand—For Along-the-Length Turning, Boring, Chamfering, and Facing
 |  |
Style A, Right Hand |
Style A tools cut a sharp 90° square shoulder.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| AR-4 | Steel | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A121 | 00000 | ||
| AR-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A122 | 0000 | ||
| AR-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A123 | 0000 | ||
| AR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A125 | 0000 | ||
| AR-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A127 | 00000 | ||
| AR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A129 | 00000 | ||
| AR-16 | Steel | 1" | 1" | 7" | 0° | 8° | 1/32" | 9/16" | 1" | 1/4" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A452 | 00000 | ||
C6 Carbide | ||||||||||||||||
| AR-4 | Steel | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | Steel | Clapp & Haney | 3367A331 | 0000 | ||
| AR-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | Steel | Clapp & Haney | 3367A332 | 0000 | ||
| AR-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | Steel | Clapp & Haney | 3367A333 | 0000 | ||
| AR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | Steel | Clapp & Haney | 3367A335 | 0000 | ||
| AR-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | Steel | Clapp & Haney | 3367A337 | 00000 | ||
| AR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | Steel | Clapp & Haney | 3367A339 | 00000 | ||
| AR-16 | Steel | 1" | 1" | 7" | 0° | 8° | 1/32" | 9/16" | 1" | 1/4" | Steel | Clapp & Haney | 3367A451 | 00000 | ||
Micrograin Carbide | ||||||||||||||||
| AR-4 | Steel | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A859 | 00000 | ||
| AR-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A861 | 00000 | ||
| AR-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A862 | 00000 | ||
| AR-7 | Steel | 7/16" | 7/16" | 3" | 0° | 8° | 1/32" | 1/4" | 7/16" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A863 | 00000 | ||
| AR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A864 | 00000 | ||
| AR-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A865 | 00000 | ||
| AR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A866 | 00000 | ||
Style A, Left Hand—For Along-the-Length Turning, Boring, Chamfering, and Facing
 |  |
Style A, Left Hand |
Style A tools cut a sharp 90° square shoulder.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| AL-4 | Steel | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A131 | 00000 | ||
| AL-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A132 | 0000 | ||
| AL-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A133 | 0000 | ||
| AL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A135 | 0000 | ||
| AL-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A137 | 00000 | ||
| AL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A139 | 00000 | ||
| AL-16 | Steel | 1" | 1" | 7" | 0° | 8° | 1/32" | 9/16" | 1" | 1/4" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A454 | 00000 | ||
C6 Carbide | ||||||||||||||||
| AL-4 | Steel | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | Steel | Clapp & Haney | 3367A341 | 0000 | ||
| AL-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | Steel | Clapp & Haney | 3367A342 | 0000 | ||
| AL-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | Steel | Clapp & Haney | 3367A343 | 0000 | ||
| AL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | Steel | Clapp & Haney | 3367A345 | 0000 | ||
| AL-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | Steel | Clapp & Haney | 3367A347 | 00000 | ||
| AL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | Steel | Clapp & Haney | 3367A349 | 00000 | ||
| AL-16 | Steel | 1" | 1" | 7" | 0° | 8° | 1/32" | 9/16" | 1" | 1/4" | Steel | Clapp & Haney | 3367A453 | 00000 | ||
Micrograin Carbide | ||||||||||||||||
| AL-4 | Steel | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A867 | 00000 | ||
| AL-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A868 | 00000 | ||
| AL-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A869 | 00000 | ||
| AL-7 | Steel | 7/16" | 7/16" | 3" | 0° | 8° | 1/32" | 1/4" | 7/16" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A871 | 00000 | ||
| AL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A872 | 00000 | ||
| AL-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A873 | 00000 | ||
| AL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A874 | 00000 | ||
Style B, Right Hand—For Along-the-Length Turning, Boring, Chamfering, and Facing
 |  |
Style B, Right Hand |
Style B tools are suitable for roughing cuts, interrupted cuts, and cuts where a square shoulder is not required.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| BR-4 | Steel | 1/4" | 1/4" | 2" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A151 | 00000 | ||
| BR-5 | Steel | 5/16" | 5/16" | 2 1/4" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A152 | 0000 | ||
| BR-6 | Steel | 3/8" | 3/8" | 2 1/2" | 15° | 15° | 1/64" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A153 | 0000 | ||
| BR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 15° | 15° | 1/32" | 1/4" | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A155 | 0000 | ||
| BR-10 | Steel | 5/8" | 5/8" | 4" | 15° | 15° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A157 | 00000 | ||
| BR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 15° | 15° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A159 | 00000 | ||
C6 Carbide | ||||||||||||||||
| BR-4 | Steel | 1/4" | 1/4" | 2" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Steel | Clapp & Haney | 3367A361 | 0000 | ||
| BR-5 | Steel | 5/16" | 5/16" | 2 1/4" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Steel | Clapp & Haney | 3367A362 | 0000 | ||
| BR-6 | Steel | 3/8" | 3/8" | 2 1/2" | 15° | 15° | 1/64" | 1/4" | 1/2" | 1/8" | Steel | Clapp & Haney | 3367A363 | 0000 | ||
| BR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 15° | 15° | 1/32" | 1/4" | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A365 | 0000 | ||
| BR-10 | Steel | 5/8" | 5/8" | 4" | 15° | 15° | 1/32" | 3/8" | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A367 | 00000 | ||
| BR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 15° | 15° | 1/32" | 7/16" | 13/16" | 3/16" | Steel | Clapp & Haney | 3367A369 | 00000 | ||
Micrograin Carbide | ||||||||||||||||
| BR-6 | Steel | 3/8" | 3/8" | 2 1/2" | 15° | 15° | 1/64" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A875 | 00000 | ||
| BR-7 | Steel | 7/16" | 7/16" | 3" | 15° | 15° | 1/32" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A876 | 00000 | ||
| BR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 15° | 15° | 1/32" | 1/4" | 5/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A877 | 00000 | ||
| BR-10 | Steel | 5/8" | 5/8" | 4" | 15° | 15° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A878 | 00000 | ||
| BR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 15° | 15° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A879 | 00000 | ||
Style B, Left Hand—For Along-the-Length Turning, Boring, Chamfering, and Facing
 |  |
Style B, Left Hand |
Style B tools are suitable for roughing cuts, interrupted cuts, and cuts where a square shoulder is not required.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| BL-4 | Steel | 1/4" | 1/4" | 2" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A171 | 00000 | ||
| BL-5 | Steel | 5/16" | 5/16" | 2 1/4" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A172 | 0000 | ||
| BL-6 | Steel | 3/8" | 3/8" | 2 1/2" | 15° | 15° | 1/64" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A173 | 0000 | ||
| BL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 15° | 15° | 1/32" | 1/4" | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A175 | 0000 | ||
| BL-10 | Steel | 5/8" | 5/8" | 4" | 15° | 15° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A176 | 00000 | ||
| BL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 15° | 15° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A177 | 00000 | ||
C6 Carbide | ||||||||||||||||
| BL-4 | Steel | 1/4" | 1/4" | 2" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Steel | Clapp & Haney | 3367A381 | 0000 | ||
| BL-5 | Steel | 5/16" | 5/16" | 2 1/4" | 15° | 15° | 1/64" | 3/16" | 5/16" | 3/32" | Steel | Clapp & Haney | 3367A382 | 0000 | ||
| BL-6 | Steel | 3/8" | 3/8" | 2 1/2" | 15° | 15° | 1/64" | 1/4" | 1/2" | 1/8" | Steel | Clapp & Haney | 3367A383 | 0000 | ||
| BL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 15° | 15° | 1/32" | 1/4" | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A385 | 0000 | ||
| BL-10 | Steel | 5/8" | 5/8" | 4" | 15° | 15° | 1/32" | 3/8" | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A387 | 00000 | ||
| BL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 15° | 15° | 1/32" | 7/16" | 13/16" | 3/16" | Steel | Clapp & Haney | 3367A389 | 00000 | ||
Micrograin Carbide | ||||||||||||||||
| BL-6 | Steel | 3/8" | 3/8" | 2 1/2" | 15° | 15° | 1/64" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A881 | 00000 | ||
| BL-7 | Steel | 7/16" | 7/16" | 3" | 15° | 15° | 1/32" | 1/4" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A882 | 00000 | ||
| BL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 15° | 15° | 1/32" | 1/4" | 5/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A883 | 00000 | ||
| BL-10 | Steel | 5/8" | 5/8" | 4" | 15° | 15° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A884 | 00000 | ||
| BL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 15° | 15° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A885 | 00000 | ||
Style C, Neutral—For Along-the-Length Turning, Chamfering, External Grooving, and Facing
 |  |
Style C, Neutral |
Style C tools have a square nose for general purpose machining and can also be used to plunge straight into the workpiece like a grooving tool.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Shank | Tip | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | |||||||||||||||
| C-4 | Steel | 1/4" | 1/4" | 2" | 0° | 0° | 1/4" | 1/4" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A231 | 00000 | ||
| C-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 0° | 5/16" | 5/16" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A232 | 0000 | ||
| C-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 0° | 3/8" | 3/8" | 1/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A233 | 0000 | ||
| C-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 0° | 1/2" | 1/2" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A235 | 0000 | ||
| C-10 | Steel | 5/8" | 5/8" | 4" | 0° | 0° | 5/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A237 | 00000 | ||
| C-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 0° | 3/4" | 3/4" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A239 | 00000 | ||
| C-16 | Steel | 1" | 1" | 7" | 0° | 0° | 1" | 3/4" | 1/4" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A461 | 00000 | ||
C6 Carbide | |||||||||||||||
| C-4 | Steel | 1/4" | 1/4" | 2" | 0° | 0° | 1/4" | 1/4" | 1/16" | Steel | Clapp & Haney | 3367A393 | 0000 | ||
| C-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 0° | 5/16" | 5/16" | 1/16" | Steel | Clapp & Haney | 3367A394 | 0000 | ||
| C-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 0° | 3/8" | 3/8" | 1/32" | Steel | Clapp & Haney | 3367A395 | 0000 | ||
| C-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 0° | 1/2" | 1/2" | 3/32" | Steel | Clapp & Haney | 3367A397 | 0000 | ||
| C-10 | Steel | 5/8" | 5/8" | 4" | 0° | 0° | 5/8" | 5/8" | 5/32" | Steel | Clapp & Haney | 3367A398 | 00000 | ||
| C-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 0° | 3/4" | 3/4" | 3/16" | Steel | Clapp & Haney | 3367A399 | 00000 | ||
| C-16 | Steel | 1" | 1" | 7" | 0° | 0° | 1" | 3/4" | 1/4" | Steel | Clapp & Haney | 3367A459 | 00000 | ||
Micrograin Carbide | |||||||||||||||
| C-4 | Steel | 1/4" | 1/4" | 2" | 0° | 0° | 1/4" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A898 | 00000 | ||
| C-5 | Steel | 5/16" | 5/16" | 2 1/4" | 0° | 0° | 5/16" | 5/16" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A899 | 00000 | ||
| C-6 | Steel | 3/8" | 3/8" | 2 1/2" | 0° | 0° | 3/8" | 3/8" | 1/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A901 | 00000 | ||
| C-7 | Steel | 7/16" | 7/16" | 3" | 0° | 0° | 7/16" | 7/16" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A902 | 00000 | ||
| C-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 0° | 1/2" | 1/2" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A903 | 00000 | ||
| C-10 | Steel | 5/8" | 5/8" | 4" | 0° | 0° | 5/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A904 | 00000 | ||
| C-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 0° | 3/4" | 3/4" | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A905 | 00000 | ||
Style D, Neutral—For Along-the-Length Turning, Boring, Chamfering, External Grooving, and Facing
 |  |
Style D, Neutral |
Style D tools are for light general purpose machining. Their triangular nose can also be used for grooving and undercutting.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Shank | Tip | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Nose Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | |||||||||||||||
| D-4 | Steel | 1/4" | 1/4" | 2" | 80° | 1/64" | 1/4" | 5/16" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A251 | 00000 | ||
| D-5 | Steel | 5/16" | 5/16" | 2 1/4" | 80° | 1/64" | 5/16" | 3/8" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A252 | 0000 | ||
| D-6 | Steel | 3/8" | 3/8" | 2 1/2" | 80° | 1/64" | 3/8" | 1/2" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A253 | 0000 | ||
| D-8 | Steel | 1/2" | 1/2" | 3 1/2" | 80° | 1/32" | 1/2" | 1/2" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A255 | 0000 | ||
| D-10 | Steel | 5/8" | 5/8" | 4" | 80° | 1/32" | 5/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A256 | 00000 | ||
| D-12 | Steel | 3/4" | 3/4" | 4 1/2" | 80° | 1/32" | 3/4" | 3/4" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A257 | 00000 | ||
| D-16 | Steel | 1" | 1" | 7" | 80° | 1/32" | 1" | 3/4" | 1/4" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A463 | 00000 | ||
C6 Carbide | |||||||||||||||
| D-4 | Steel | 1/4" | 1/4" | 2" | 80° | 1/64" | 1/4" | 5/16" | 1/16" | Steel | Clapp & Haney | 3367A421 | 0000 | ||
| D-5 | Steel | 5/16" | 5/16" | 2 1/4" | 80° | 1/64" | 5/16" | 3/8" | 3/32" | Steel | Clapp & Haney | 3367A422 | 0000 | ||
| D-6 | Steel | 3/8" | 3/8" | 2 1/2" | 80° | 1/64" | 3/8" | 1/2" | 3/32" | Steel | Clapp & Haney | 3367A423 | 0000 | ||
| D-8 | Steel | 1/2" | 1/2" | 3 1/2" | 80° | 1/32" | 1/2" | 1/2" | 1/8" | Steel | Clapp & Haney | 3367A425 | 00000 | ||
| D-10 | Steel | 5/8" | 5/8" | 4" | 80° | 1/32" | 5/8" | 5/8" | 5/32" | Steel | Clapp & Haney | 3367A427 | 00000 | ||
| D-12 | Steel | 3/4" | 3/4" | 4 1/2" | 80° | 1/32" | 3/4" | 3/4" | 3/16" | Steel | Clapp & Haney | 3367A429 | 00000 | ||
| D-16 | Steel | 1" | 1" | 7" | 80° | 1/32" | 1" | 3/4" | 1/4" | Steel | Clapp & Haney | 3367A462 | 00000 | ||
Micrograin Carbide | |||||||||||||||
| D-4 | Steel | 1/4" | 1/4" | 2" | 80° | 1/64" | 1/4" | 5/16" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A906 | 00000 | ||
| D-5 | Steel | 5/16" | 5/16" | 2 1/4" | 80° | 1/64" | 5/16" | 3/8" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A907 | 00000 | ||
| D-6 | Steel | 3/8" | 3/8" | 2 1/2" | 80° | 1/64" | 3/8" | 1/2" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A908 | 00000 | ||
| D-7 | Steel | 7/16" | 7/16" | 3" | 80° | 1/32" | 7/16" | 1/2" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A909 | 00000 | ||
| D-8 | Steel | 1/2" | 1/2" | 3 1/2" | 80° | 1/32" | 1/2" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A911 | 00000 | ||
| D-10 | Steel | 5/8" | 5/8" | 4" | 80° | 1/32" | 5/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A912 | 00000 | ||
| D-12 | Steel | 3/4" | 3/4" | 4 1/2" | 80° | 1/32" | 3/4" | 3/4" | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A913 | 00000 | ||
Style F, Right Hand—For Along-the-Length Turning, Boring, and Facing
 |  |
Style F, Right Hand |
Style F and G tools have an offset head for cutting close to the chuck.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| FR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 8° | 0° | 1/32" | 5/16" | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A472 | 000000 | ||
| FR-10 | Steel | 5/8" | 5/8" | 4" | 8° | 0° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A474 | 00000 | ||
| FR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 8° | 0° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A476 | 00000 | ||
C6 Carbide | ||||||||||||||||
| FR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 8° | 0° | 1/32" | 5/16" | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A471 | 00000 | ||
| FR-10 | Steel | 5/8" | 5/8" | 4" | 8° | 0° | 1/32" | 3/8" | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A473 | 00000 | ||
| FR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 8° | 0° | 1/32" | 7/16" | 13/16" | 3/16" | Steel | Clapp & Haney | 3367A475 | 00000 | ||
Style F, Left Hand—For Along-the-Length Turning, Boring, and Facing
 |  |
Style F, Left Hand |
Style F and G tools have an offset head for cutting close to the chuck.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| FL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 8° | 0° | 1/32" | 5/16" | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A481 | 000000 | ||
| FL-10 | Steel | 5/8" | 5/8" | 4" | 8° | 0° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A483 | 00000 | ||
| FL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 8° | 0° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A485 | 00000 | ||
C6 Carbide | ||||||||||||||||
| FL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 8° | 0° | 1/32" | 5/16" | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A479 | 00000 | ||
| FL-10 | Steel | 5/8" | 5/8" | 4" | 8° | 0° | 1/32" | 3/8" | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A482 | 00000 | ||
| FL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 8° | 0° | 1/32" | 7/16" | 13/16" | 3/16" | Steel | Clapp & Haney | 3367A484 | 00000 | ||
Style G, Right Hand—For Along-the-Length Turning, Boring, and Facing
 |  |
Style G, Right Hand |
Style F and G tools have an offset head for cutting close to the chuck.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| GR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 5/16" | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A489 | 000000 | ||
| GR-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A492 | 00000 | ||
| GR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A494 | 00000 | ||
C6 Carbide | ||||||||||||||||
| GR-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 5/16" | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A488 | 00000 | ||
| GR-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A491 | 00000 | ||
| GR-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 13/16" | 3/16" | Steel | Clapp & Haney | 3367A493 | 00000 | ||
Style G, Left Hand—For Along-the-Length Turning, Boring, and Facing
 |  |
Style G, Left Hand |
Style F and G tools have an offset head for cutting close to the chuck.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Shank | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Material | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
C2 Carbide | ||||||||||||||||
| GL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 5/16" | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A498 | 000000 | ||
| GL-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A501 | 00000 | ||
| GL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 13/16" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A503 | 00000 | ||
C6 Carbide | ||||||||||||||||
| GL-8 | Steel | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 5/16" | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A497 | 00000 | ||
| GL-10 | Steel | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A499 | 00000 | ||
| GL-12 | Steel | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 13/16" | 3/16" | Steel | Clapp & Haney | 3367A502 | 00000 | ||
Curve-Cutting Lathe Tools
 |  |  |  |
Concave | Convex | Concave | Convex |
Form curved edges on a workpiece. A right-handed cut direction means that these tools cut from right to left.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Shank | Tip | C2 Carbide | C6 Carbide | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Radius | Radius Tolerance | Wd. | Ht. | Overall Lg. | Wd. | Lg. | Thk. | Mfr. | For Use On | Each | For Use On | Each | ||||
Right-Hand Cutting Direction | ||||||||||||||||
For Concave | ||||||||||||||||
| 1/32" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A31 | 000000 | Steel | 3359A51 | 000000 | ||
| 1/16" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A32 | 00000 | Steel | 3359A52 | 00000 | ||
| 3/32" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A33 | 00000 | Steel | 3359A53 | 00000 | ||
| 1/8" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A34 | 00000 | Steel | 3359A54 | 00000 | ||
| 5/32" | -0.001" to 0.001" | 3/8" | 3/8" | 2 1/2" | 3/8" | 3/8" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A35 | 00000 | Steel | 3359A55 | 00000 | ||
| 3/16" | -0.001" to 0.001" | 3/8" | 3/8" | 2 1/2" | 3/8" | 3/8" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A36 | 00000 | Steel | 3359A56 | 00000 | ||
| 1/4" | -0.001" to 0.001" | 3/8" | 3/8" | 2 1/2" | 3/8" | 3/8" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A38 | 00000 | Steel | 3359A58 | 00000 | ||
| 5/16" | -0.001" to 0.001" | 1/2" | 1/2" | 3 1/2" | 1/2" | 1/2" | 1/8" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A41 | 00000 | Steel | 3359A62 | 00000 | ||
| 3/8" | -0.001" to 0.001" | 1/2" | 1/2" | 3 1/2" | 1/2" | 1/2" | 1/8" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A43 | 00000 | Steel | 3359A64 | 00000 | ||
| 1/2" | -0.001" to 0.001" | 3/4" | 3/4" | 4 1/2" | 3/4" | 3/4" | 3/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3359A47 | 00000 | Steel | 3359A68 | 00000 | ||
For Convex | ||||||||||||||||
| 1/32" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A31 | 00000 | Steel | 3361A51 | 00000 | ||
| 1/16" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A32 | 00000 | Steel | 3361A52 | 00000 | ||
| 3/32" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A33 | 00000 | Steel | 3361A53 | 00000 | ||
| 1/8" | -0.001" to 0.001" | 1/4" | 1/4" | 2" | 1/4" | 5/16" | 1/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A34 | 00000 | Steel | 3361A54 | 00000 | ||
| 5/32" | -0.001" to 0.001" | 3/8" | 3/8" | 2 1/2" | 3/8" | 3/8" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A35 | 00000 | Steel | 3361A55 | 00000 | ||
| 3/16" | -0.001" to 0.001" | 3/8" | 3/8" | 2 1/2" | 3/8" | 3/8" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A36 | 00000 | Steel | 3361A56 | 00000 | ||
| 1/4" | -0.001" to 0.001" | 3/8" | 3/8" | 2 1/2" | 3/8" | 3/8" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A38 | 00000 | Steel | 3361A58 | 00000 | ||
| 5/16" | -0.001" to 0.001" | 1/2" | 1/2" | 3 1/2" | 1/2" | 1/2" | 1/8" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A41 | 00000 | Steel | 3361A62 | 00000 | ||
| 3/8" | -0.001" to 0.001" | 1/2" | 1/2" | 3 1/2" | 1/2" | 1/2" | 1/8" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A43 | 00000 | Steel | 3361A64 | 00000 | ||
| 1/2" | -0.001" to 0.001" | 3/4" | 3/4" | 4 1/2" | 3/4" | 3/4" | 3/16" | Clapp & Haney | Aluminum, Brass, Bronze | 3361A47 | 00000 | Steel | 3361A68 | 00000 | ||
Carbide-Tipped External Grooving and Cutoff Lathe Tools
For Cutoff and External Grooving
 |  |
Right-Hand Cutting Direction | Left-Hand Cutting Direction |
 |
Right-Hand Cutting Direction |
 |
Left-Hand Cutting Direction |
Right-Hand Cutting Direction—Choose right-hand tools if you need more clearance on the left side of the tool.
Left-Hand Cutting Direction—Choose left-hand tools if you need more clearance on the right side of the tool.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C5 carbide when cutting aluminum, brass, and bronze.
C5 Carbide—C5 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C5 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Tool Bit | Shank | Groove | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Code | Wd. | Ht. | Wd. | Dp. | Overall Lg. | End Cutting Edge Angle | Tip Radius | For Use On | Mfr. | Each | |||
Right-Hand Cutting Direction | ||||||||||||||
C2 Carbide | ||||||||||||||
| CT | CT-120 | 1/2" | 1" | 5/16" | 1" | 5" | 5° | 5/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A469 | 000000 | ||
| CT | CT-121 | 1/2" | 1" | 1/4" | 1" | 5" | 5° | 1/4" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A467 | 00000 | ||
| CT | CT-122 | 1/2" | 1" | 3/16" | 13/16" | 5" | 5° | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A465 | 00000 | ||
| CT | CT-130 | 5/8" | 1 1/4" | 3/8" | 1 1/4" | 5" | 5° | 3/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A921 | 00000 | ||
| CT | CT-140 | 3/4" | 1 1/2" | 3/8" | 1 1/4" | 6" | 5° | 3/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A925 | 00000 | ||
C5 Carbide | ||||||||||||||
| CT | CT-120 | 1/2" | 1" | 5/16" | 1" | 5" | 5° | 5/16" | Steel | Clapp & Haney | 3367A468 | 00000 | ||
| CT | CT-121 | 1/2" | 1" | 1/4" | 1" | 5" | 5° | 1/4" | Steel | Clapp & Haney | 3367A466 | 00000 | ||
| CT | CT-122 | 1/2" | 1" | 3/16" | 13/16" | 5" | 5° | 3/16" | Steel | Clapp & Haney | 3367A464 | 00000 | ||
| CT | CT-130 | 5/8" | 1 1/4" | 3/8" | 1 1/4" | 5" | 5° | 3/8" | Steel | Clapp & Haney | 3367A922 | 00000 | ||
Micrograin Carbide | ||||||||||||||
| CT | CT-120 | 1/2" | 1" | 5/16" | 1" | 5" | 5° | 5/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A855 | 00000 | ||
| CT | CT-121 | 1/2" | 1" | 1/4" | 1" | 5" | 5° | 1/4" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A854 | 00000 | ||
| CT | CT-122 | 1/2" | 1" | 3/16" | 13/16" | 5" | 5° | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A853 | 00000 | ||
| CT | CT-130 | 5/8" | 1 1/4" | 3/8" | 1 1/4" | 5" | 5° | 3/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A923 | 00000 | ||
| CT | CT-140 | 3/4" | 1 1/2" | 3/8" | 1 1/4" | 6" | 5° | 3/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A927 | 00000 | ||
Left-Hand Cutting Direction | ||||||||||||||
C2 Carbide | ||||||||||||||
| CT | CTL-120 | 1/2" | 1" | 5/16" | 1" | 5" | 5° | 5/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A756 | 00000 | ||
| CT | CTL-121 | 1/2" | 1" | 1/4" | 1" | 5" | 5° | 1/4" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A755 | 00000 | ||
| CT | CTL-130 | 5/8" | 1 1/4" | 3/8" | 1 1/4" | 5" | 5° | 3/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A929 | 00000 | ||
C5 Carbide | ||||||||||||||
| CT | CTL-120 | 1/2" | 1" | 5/16" | 1" | 5" | 5° | 5/16" | Steel | Clapp & Haney | 3367A753 | 00000 | ||
| CT | CTL-121 | 1/2" | 1" | 1/4" | 1" | 5" | 5° | 1/4" | Steel | Clapp & Haney | 3367A752 | 00000 | ||
| CT | CTL-122 | 1/2" | 1" | 3/16" | 13/16" | 5" | 5° | 3/16" | Steel | Clapp & Haney | 3367A751 | 00000 | ||
Micrograin Carbide | ||||||||||||||
| CT | CTL-120 | 1/2" | 1" | 5/16" | 1" | 5" | 5° | 1/4" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A858 | 00000 | ||
| CT | CTL-121 | 1/2" | 1" | 1/4" | 1" | 5" | 5° | 5/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A857 | 00000 | ||
| CT | CTL-122 | 1/2" | 1" | 3/16" | 13/16" | 5" | 5° | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Clapp & Haney | 3367A856 | 00000 | ||
Carbide-Tipped External Threading Lathe Tools
For External Threading
 |  |  |  |  |  |
Right-Hand Cutting Direction | Left-Hand Cutting Direction | Neutral Cutting Direction | Right-Hand Cutting Direction | Left-Hand Cutting Direction | Neutral Cutting Direction |
Tool Bit | Shank | Thread | Tip | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Code | Wd. | Ht. | Type | Shape | Overall Lg. | Nose Angle | Lg. | Thk. | For Use On | Mfr. | Each | |||
Right-Hand Cutting Direction | |||||||||||||||
C2 Carbide | |||||||||||||||
| E | ER-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A518 | 00000 | ||
| E | ER-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A519 | 0000 | ||
| E | ER-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A521 | 00000 | ||
| E | ER-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A522 | 00000 | ||
| E | ER-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A523 | 00000 | ||
C6 Carbide | |||||||||||||||
| E | ER-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Steel | Clapp & Haney | 3367A512 | 0000 | ||
| E | ER-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 3/8" | 3/32" | Steel | Clapp & Haney | 3367A513 | 0000 | ||
| E | ER-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A514 | 00000 | ||
| E | ER-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A515 | 00000 | ||
| E | ER-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A516 | 00000 | ||
Micrograin Carbide | |||||||||||||||
| E | ER-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A886 | 00000 | ||
| E | ER-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A887 | 00000 | ||
| E | ER-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A889 | 00000 | ||
| E | ER-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A891 | 00000 | ||
| E | ER-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A892 | 00000 | ||
Left-Hand Cutting Direction | |||||||||||||||
C2 Carbide | |||||||||||||||
| E | EL-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A532 | 0000 | ||
| E | EL-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A533 | 0000 | ||
| E | EL-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A534 | 00000 | ||
| E | EL-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A535 | 00000 | ||
| E | EL-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A536 | 00000 | ||
C6 Carbide | |||||||||||||||
| E | EL-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Steel | Clapp & Haney | 3367A525 | 0000 | ||
| E | EL-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 3/8" | 3/32" | Steel | Clapp & Haney | 3367A526 | 0000 | ||
| E | EL-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A527 | 00000 | ||
| E | EL-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 1/8" | Steel | Clapp & Haney | 3367A528 | 00000 | ||
| E | EL-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 5/32" | Steel | Clapp & Haney | 3367A529 | 00000 | ||
Micrograin Carbide | |||||||||||||||
| E | EL-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A893 | 00000 | ||
| E | EL-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A894 | 00000 | ||
| E | EL-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A895 | 00000 | ||
| E | EL-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A896 | 00000 | ||
Neutral Cutting Direction | |||||||||||||||
C2 Carbide | |||||||||||||||
| E | E-4 | 1/4" | 1/4" | UNC, UNF, UNS | V | 2" | 60° | 5/16" | 1/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A271 | 0000 | ||
| E | E-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A272 | 0000 | ||
| E | E-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 1/2" | 3/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A273 | 0000 | ||
| E | E-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 1/2" | 1/8" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A275 | 0000 | ||
| E | E-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 5/32" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A276 | 00000 | ||
| E | E-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 3/16" | Aluminum, Brass, Bronze | Clapp & Haney | 3367A277 | 00000 | ||
C5 Carbide | |||||||||||||||
| E | E-4 | 1/4" | 1/4" | UNC, UNF, UNS | V | 2" | 60° | 5/16" | 1/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Sowa Tool | 3367A111 | 00000 | ||
| E | E-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Sowa Tool | 3367A112 | 00000 | ||
| E | E-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 1/2" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Sowa Tool | 3367A113 | 00000 | ||
| E | E-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Sowa Tool | 3367A114 | 00000 | ||
C6 Carbide | |||||||||||||||
| E | E-4 | 1/4" | 1/4" | UNC, UNF, UNS | V | 2" | 60° | 5/16" | 1/16" | Steel | Clapp & Haney | 3367A441 | 0000 | ||
| E | E-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Steel | Clapp & Haney | 3367A442 | 0000 | ||
| E | E-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 1/2" | 3/32" | Steel | Clapp & Haney | 3367A443 | 0000 | ||
| E | E-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 1/2" | 1/8" | Steel | Clapp & Haney | 3367A445 | 00000 | ||
| E | E-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 5/32" | Steel | Clapp & Haney | 3367A447 | 00000 | ||
| E | E-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 3/16" | Steel | Clapp & Haney | 3367A449 | 00000 | ||
Micrograin Carbide | |||||||||||||||
| E | E-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 3/8" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A914 | 00000 | ||
| E | E-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 1/2" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A915 | 00000 | ||
| E | E-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 1/2" | 1/8" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A916 | 00000 | ||
| E | E-10 | 5/8" | 5/8" | UNC, UNF, UNS | V | 4" | 60° | 5/8" | 5/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A917 | 00000 | ||
| E | E-12 | 3/4" | 3/4" | UNC, UNF, UNS | V | 4 1/2" | 60° | 3/4" | 3/16" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3367A918 | 00000 | ||
Economy Indexable Lathe Tool Sets
 |
Tool Set with TPMT Inserts |
 |
Tool Set with VCMT Inserts |
 |  |  |
AL | AR | BL |
 |  |  |
BR | E | VE |
 |  | |
VL | VR |
Keep a variety of tools on hand to cut and shape workpieces. The tools in these sets come with carbide inserts installed. When one edge of the insert dulls, rotate to a fresh one. When all the edges are dull, you can replace the insert rather than the entire tool. Right-handed tools cut from right to left, left-handed tools cut from left to right, and neutral tools can cut in either direction. All sets come with uncoated C5 inserts.
A Tool Bit—Styles AR and AL help you create a sharp 90° square shoulder.
B Tool Bit—Styles BR and BL are used for roughing, interrupted cuts, and cuts where a square shoulder is not required.
E Tool Bit—Style E are for external threading.
V Tool Bit—Style V fit into tighter areas than Style A and B. They also create cleaner edges and a finer surface finish.
Tools | Replacement Round Head Screws | Replacement Flat Head Screws | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | Insert | ||||||||||||||||||
Wd. | Ht. | Overall Lg. | No. of Pieces | Includes | Tool Bit Style | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thk. | Mfr. | Each | Each | Each | |||||
For Along-the-Length Turning, Boring, Chamfering, External Threading, and Facing | |||||||||||||||||||
| 3/8" | 3/8" | 2 1/2" | 9 | Five TPMT-221 Inserts One AL-6 left hand lathe tool One AR-6 right hand lathe tool One BL-6 left hand lathe tool One BR-6 right hand lathe tool One E-6 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | A, B, E | Carbon Steel | Steel | TPMT-221 | 1/4" | 1/8" | Borite | 3240A125 | 0000000 | 3240A211 | 00000 | ——— | 0 | ||
| 1/2" | 1/2" | 3 1/2" | 9 | Five TPMT-321 Inserts One AL-8 left hand lathe tool One AR-8 right hand lathe tool One BL-8 left hand lathe tool One BR-8 right hand lathe tool One E-8 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | A, B, E | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | Borite | 3240A126 | 000000 | 3240A212 | 0000 | ——— | 0 | ||
| 5/8" | 5/8" | 4" | 9 | Five TPMT-321 Inserts One AL-10 left hand lathe tool One AR-10 right hand lathe tool One BL-10 left hand lathe tool One BR-10 right hand lathe tool One E-10 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | A, B, E | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | Borite | 3240A127 | 000000 | 3240A212 | 0000 | ——— | 0 | ||
| 3/4" | 3/4" | 4 1/2" | 9 | Five TPMT-321 Inserts One AL-12 left hand lathe tool One AR-12 right hand lathe tool One BL-12 left hand lathe tool One BR-12 right hand lathe tool One E-12 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | A, B, E | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | Borite | 3240A128 | 000000 | 3240A212 | 0000 | ——— | 0 | ||
| 1" | 1" | 6" | 9 | Five TPMT-431 Inserts One AL-16 left hand lathe tool One AR-16 right hand lathe tool One BL-16 left hand lathe tool One BR-16 right hand lathe tool One E-16 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | A, B, E | Carbon Steel | Steel | TPMT-431 | 1/2" | 3/16" | Borite | 3240A333 | 000000 | ——— | 0 | 3240A334 | 00000 | ||
For Along-the-Length Turning, Chamfering, External Profiling, Facing, and Internal Profiling | |||||||||||||||||||
| 1/2" | 1/2" | 3 1/2" | 5 | One Hex Screw One L-Key One VE-8 neutral lathe tool One VL-8 left hand lathe tool One VR-8 right hand lathe tool Plastic Stand Three VCMT-32.52 Inserts | V | Carbon Steel | Steel | VCMT-32.52 | 3/8" | 5/32" | Borite | 3240A335 | 000000 | 3240A212 | 0000 | ——— | 0 | ||
| 5/8" | 5/8" | 4" | 5 | One Hex Screw One L-Key One VE-10 neutral lathe tool One VL-10 left hand lathe tool One VR-10 right hand lathe tool Plastic Stand Three VCMT-32.52 Inserts | V | Carbon Steel | Steel | VCMT-32.52 | 3/8" | 5/32" | Borite | 3240A336 | 000000 | 3240A212 | 0000 | ——— | 0 | ||
| 3/4" | 3/4" | 4 1/2" | 5 | One Hex Screw One L-Key One VE-12 neutral lathe tool One VL-12 left hand lathe tool One VR-12 right hand lathe tool Plastic Stand Three VCMT-32.52 Inserts | V | Carbon Steel | Steel | VCMT-32.52 | 3/8" | 5/32" | Borite | 3240A337 | 000000 | 3240A212 | 0000 | ——— | 0 | ||
| 1" | 1" | 6" | 5 | One Hex Screw One L-Key One VE-16 neutral lathe tool One VL-16 left hand lathe tool One VR-16 right hand lathe tool Plastic Stand Three VCMT-32.52 Inserts | V | Carbon Steel | Steel | VCMT-32.52 | 3/8" | 5/32" | Borite | 3240A338 | 000000 | 3240A212 | 0000 | ——— | 0 | ||
 |  |  |
Individual Carbide Insert Case | TPMT |
 |  |
VCMT | TPMT |
Each | Package | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | For Use On | Each | Pkg. Qty. | Pkg. | ||||
Uncoated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A132 | 000000 | 10 | 3240A129 | 0000000 | ||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A131 | 00000 | 10 | 3240A123 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A135 | 00000 | 10 | 3240A252 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A134 | 00000 | 10 | 3240A16 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Aluminum, Brass, Bronze | 3240A138 | 00000 | 10 | 3240A445 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A137 | 00000 | 10 | 3240A303 | 000000 | ||
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Aluminum, Brass, Bronze | 3240A142 | 00000 | 10 | 3240A56 | 000000 | ||
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A141 | 00000 | 10 | 3240A509 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Aluminum, Brass, Bronze | 1691N111 | 00000 | 10 | 1691N121 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N113 | 00000 | 10 | 1691N123 | 000000 | ||
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | Aluminum, Brass, Bronze | 1691N112 | 00000 | 10 | 1691N122 | 000000 | ||
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N114 | 00000 | 10 | 1691N124 | 000000 | ||
| VCMT-32.52 | 3/8" | 5/32" | 0.65" | 1/32" | VE-8, VE-10, VE-12, VE-16, VL-8, VL-10, VL-12, VL-16, VR-8, VR-10, VR-12, VR-16 | Aluminum, Brass, Bronze | 1691N117 | 00000 | 10 | 1691N127 | 000000 | ||
| VCMT-32.52 | 3/8" | 5/32" | 0.65" | 1/32" | VE-8, VE-10, VE-12, VE-16, VL-8, VL-10, VL-12, VL-16, VR-8, VR-10, VR-12, VR-16 | Steel | 1691N119 | 00000 | 10 | 1691N129 | 000000 | ||
Titanium Nitride (TiN) Coated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A133 | 00000 | 10 | 3240A13 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A136 | 00000 | 10 | 3240A259 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A139 | 00000 | 10 | 3240A495 | 000000 | ||
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A143 | 00000 | 10 | 3240A758 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N115 | 00000 | 10 | 1691N125 | 000000 | ||
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N116 | 00000 | 10 | 1691N126 | 000000 | ||
| VCMT-32.52 | 3/8" | 5/32" | 0.65" | 1/32" | VE-8, VE-10, VE-12, VE-16, VL-8, VL-10, VL-12, VL-16, VR-8, VR-10, VR-12, VR-16 | Steel | 1691N118 | 00000 | 10 | 1691N128 | 000000 | ||
Internal Grooving Lathe Tools for Retaining Rings
 |  |  |
Groove Wd. | Min. Hole Dia. | Max. Hole Dp. | Offset | Shank Dia. | Overall Lg. | Material | For Use On | Mfr. | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.018" | 3/16" | 5/8" | 0.05" | 3/16" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A81 | 000000 | |
| 0.018" | 1/4" | 5/8" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A82 | 00000 | |
| 0.026" | 1/4" | 1/2" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A18 | 00000 | |
| 0.031" | 3/16" | 1/4" | 0.05" | 3/16" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A21 | 00000 | |
| 0.031" | 1/4" | 3/8" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A22 | 00000 | |
| 0.031" | 1/4" | 5/8" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A24 | 00000 | |
| 0.039" | 5/16" | 3/4" | 0.1" | 5/16" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A31 | 00000 | |
| 0.041" | 3/8" | 1/2" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A34 | 00000 | |
| 0.047" | 3/32" | 1/4" | 0.03" | 1/8" | 2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A17 | 00000 | |
| 0.048" | 3/8" | 1" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A41 | 00000 | |
| 0.057" | 3/8" | 1" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A46 | 00000 | |
| 0.063" | 1/8" | 1/4" | 0.04" | 1/8" | 2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A42 | 00000 | |
| 0.063" | 1/8" | 3/8" | 0.04" | 1/8" | 2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A43 | 00000 | |
| 0.064" | 5/16" | 3/4" | 0.1" | 5/16" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A47 | 00000 | |
| 0.064" | 3/8" | 1/2" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A48 | 00000 | |
| 0.064" | 3/8" | 1" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A51 | 00000 | |
| 0.071" | 3/8" | 1" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A54 | 00000 | |
| 0.089" | 3/8" | 1" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A58 | 00000 | |
| 0.095" | 1/2" | 3/4" | 0.15" | 1/2" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A59 | 00000 | |
| 0.098" | 1/4" | 1/2" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A64 | 00000 | |
| 0.105" | 3/8" | 1/2" | 0.106" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A61 | 00000 | |
| 0.122" | 3/8" | 1/2" | 0.106" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A62 | 00000 | |
| 0.127" | 3/8" | 1" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A83 | 00000 | |
| 0.143" | 1/4" | 9/16" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A65 | 00000 | |
| 0.146" | 1/4" | 5/8" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A66 | 00000 | |
| 0.157" | 1/2" | 1" | 0.15" | 1/2" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A84 | 00000 | |
| 0.176" | 3/8" | 3/4" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A67 | 00000 | |
| 0.189" | 1/2" | 1" | 0.15" | 1/2" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A85 | 00000 | |
| 0.243" | 3/8" | 15/16" | 0.1" | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A68 | 00000 | |
| 0.252" | 1/2" | 1" | 0.15" | 1/2" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A86 | 00000 | |
| 0.5 mm | 1/4" | 1/2" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A73 | 00000 | |
| 1.1 mm | 1/4" | 1/2" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A75 | 00000 | |
| 1.3 mm | 1/4" | 1/2" | 0.05" | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A76 | 00000 |
Face Grooving Lathe Tools
 |  |
Groove | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Min. Dia. | Offset | Shank Dia. | Neck Relief | Overall Lg. | Material | For Use On | Mfr. | Each | ||
| 0.015" | 0.04" | 0.135" | 0.005" | 1/8" | 0.4" | 1 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N11 | 000000 | |
| 0.02" | 0.05" | 0.135" | 0.005" | 1/8" | 0.4" | 1 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N12 | 00000 | |
| 0.021" | 0.05" | 0.26" | 0.006" | 1/4" | 3/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N19 | 00000 | |
| 0.025" | 0.05" | 0.135" | 0.005" | 1/8" | 0.4" | 1 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N13 | 00000 | |
| 0.03" | 0.06" | 0.135" | 0.005" | 1/8" | 0.4" | 1 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N14 | 00000 | |
| 0.031" | 0.06" | 0.26" | 0.006" | 1/4" | 3/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N21 | 00000 | |
| 0.031" | 0.06" | 0.32" | 0.007" | 5/16" | 1" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N24 | 00000 | |
| 0.031" | 0.06" | 0.385" | 0.008" | 3/8" | 1 1/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N28 | 00000 | |
| 0.035" | 0.07" | 0.195" | 0.006" | 3/16" | 1/2" | 2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N15 | 00000 | |
| 0.04" | 0.08" | 0.195" | 0.006" | 3/16" | 1/2" | 2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N16 | 00000 | |
| 0.041" | 0.08" | 0.26" | 0.006" | 1/4" | 3/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N22 | 00000 | |
| 0.041" | 0.08" | 0.32" | 0.007" | 5/16" | 1" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N25 | 00000 | |
| 0.045" | 0.09" | 0.195" | 0.006" | 3/16" | 1/2" | 2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N17 | 00000 | |
| 0.05" | 0.1" | 0.195" | 0.006" | 3/16" | 1/2" | 2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N18 | 00000 | |
| 0.051" | 0.1" | 0.26" | 0.006" | 1/4" | 3/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N23 | 00000 | |
| 0.051" | 0.1" | 0.32" | 0.007" | 5/16" | 1" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N26 | 00000 | |
| 0.063" | 0.13" | 0.32" | 0.007" | 5/16" | 1" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N27 | 00000 | |
| 0.063" | 0.13" | 0.385" | 0.008" | 3/8" | 1 1/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N29 | 00000 | |
| 0.063" | 0.13" | 0.51" | 0.009" | 1/2" | 1 1/4" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N33 | 000000 | |
| 0.063" | 0.13" | 0.635" | 0.01" | 5/8" | 1 1/2" | 3 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N37 | 000000 | |
| 0.094" | 0.19" | 0.385" | 0.008" | 3/8" | 1 1/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N31 | 00000 | |
| 0.094" | 0.19" | 0.51" | 0.009" | 1/2" | 1 1/4" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N34 | 000000 | |
| 0.094" | 0.19" | 0.76" | 0.012" | 3/4" | 1 3/4" | 4" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N44 | 000000 | |
| 0.125" | 1/4" | 0.51" | 0.009" | 1/2" | 1 1/4" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N35 | 000000 | |
| 0.126" | 1/4" | 0.385" | 0.008" | 3/8" | 1 1/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N32 | 00000 | |
| 0.126" | 1/4" | 0.635" | 0.01" | 5/8" | 1 1/2" | 3 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N39 | 000000 | |
| 0.126" | 1/4" | 0.76" | 0.012" | 3/4" | 1 3/4" | 4" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N45 | 000000 | |
| 0.157" | 0.31" | 0.51" | 0.009" | 1/2" | 1 1/4" | 3" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N36 | 000000 | |
| 0.157" | 0.31" | 0.76" | 0.012" | 3/4" | 1 3/4" | 4" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N46 | 000000 | |
| 0.188" | 3/8" | 0.635" | 0.01" | 5/8" | 1 1/2" | 3 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N42 | 000000 | |
| 0.188" | 3/8" | 0.76" | 0.012" | 3/4" | 1 3/4" | 4" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N47 | 000000 | |
| 0.251" | 1/2" | 0.76" | 0.012" | 3/4" | 1 3/4" | 4" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Scientific Cutting Tools | 1373N48 | 000000 | |
Long-Reach Round-Shank Boring Lathe Tools
For Boring
 |
Right Hand |
 |
Left Hand |
 |
Neutral |
 |  |
Right-Hand Cutting Direction | Left-Hand Cutting Direction |
 | |
Neutral |
Right-Hand Cutting Direction—Right-hand tools are for boring when the workpiece is rotating counterclockwise (toward the lathe operator).
Left-Hand Cutting Direction—Left-hand tools are for boring when the workpiece is rotating clockwise (away from the lathe operator).
Neutral Cutting Direction— Neutral tools can be used when the workpiece is rotating in either direction.
Micrograin Carbide—Tips are micrograin carbide, which outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Tip | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Min. Hole Dia. | Max. Hole Dp. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
Right-Hand Cutting Direction | ||||||||||||||
Micrograin Carbide | ||||||||||||||
| 1/4" | 0.32" | 3" | 4" | 5° | 2° | 1/4" | 3/16" | 1/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A312 | 000000 | ||
| 5/16" | 0.413" | 4" | 5" | 5° | 2° | 5/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A313 | 00000 | ||
| 3/8" | 0.463" | 5" | 6" | 5° | 2° | 5/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A314 | 00000 | ||
| 1/2" | 5/8" | 6" | 7" | 5° | 2° | 1/2" | 1/4" | 1/8" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A315 | 00000 | ||
| 5/8" | 0.795" | 7" | 8" | 5° | 2° | 5/8" | 1/4" | 1/8" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A316 | 00000 | ||
| 3/4" | 0.935" | 8" | 9" | 5° | 2° | 5/8" | 1/4" | 1/8" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A317 | 00000 | ||
| 1" | 1.233" | 9" | 10" | 5° | 2° | 13/16" | 7/16" | 3/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A311 | 00000 | ||
Left-Hand Cutting Direction | ||||||||||||||
Micrograin Carbide | ||||||||||||||
| 1/4" | 0.32" | 3" | 4" | 5° | 2° | 1/4" | 3/16" | 1/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A322 | 00000 | ||
| 5/16" | 0.413" | 4" | 5" | 5° | 2° | 5/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A323 | 00000 | ||
| 3/8" | 0.463" | 5" | 6" | 5° | 2° | 5/16" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A324 | 00000 | ||
| 1/2" | 5/8" | 6" | 7" | 5° | 2° | 1/2" | 1/4" | 1/8" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A325 | 00000 | ||
| 5/8" | 0.795" | 7" | 8" | 5° | 2° | 5/8" | 1/4" | 1/8" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A326 | 00000 | ||
| 3/4" | 0.935" | 8" | 9" | 5° | 2° | 5/8" | 1/4" | 1/8" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A327 | 00000 | ||
| 1" | 1.233" | 9" | 10" | 5° | 2° | 13/16" | 7/16" | 3/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A321 | 00000 | ||
Neutral Cutting Direction | ||||||||||||||
Micrograin Carbide | ||||||||||||||
| 1/4" | 1/4" | 1 1/2" | 2 1/2" | 0° | 0° | 1/4" | 1/4" | 1/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A332 | 00000 | ||
| 5/16" | 5/16" | 2" | 3" | 0° | 0° | 5/16" | 3/8" | 3/32" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A333 | 00000 | ||
| 3/8" | 3/8" | 2 1/2" | 3 1/2" | 0° | 0° | 3/8" | 3/8" | 3/32" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A334 | 00000 | ||
EachIn stock  Select a compatible file type: Parasolid | ||||||||||||||
| 7/16" | 7/16" | 3" | 4" | 0° | 0° | 7/16" | 1/2" | 3/32" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A335 | 00000 | ||
| 1/2" | 1/2" | 4" | 5" | 0° | 0° | 1/2" | 1/2" | 1/8" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A336 | 00000 | ||
| 5/8" | 5/8" | 5" | 6" | 0° | 0° | 5/8" | 5/8" | 5/32" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A331 | 00000 | ||
Carbide-Tipped Turning Lathe Tool Sets
 |
 |  |  |  |
D | E | BL | BR |
 |  |  | |
AL | AR | C |
Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools. Right-handed tools cut from right to left, left-handed tools cut from left to right, and neutral tools can cut in either direction.
Lathe tool styles AR and AL perform along the length turning, facing, boring, and chamfering. They allow for a sharp 90° square shoulder. Lathe tool styles BR and BL perform along the length turning, facing, boring, and chamfering. They are suitable for roughing cuts, interrupted cuts, and cuts where a square shoulder is not required. Lathe tool style C perform along the length turning, facing, chamfering, and external grooving. Lathe tool style D perform along the length turning, facing, boring, chamfering, external grooving, and undercutting. Lathe tool style E are for external threading.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin Carbide—Micrograin carbide tips outperform C2 and C6 tips when cutting metal that’s difficult to machine, such as stainless steel or titanium. They leave a good finish on most materials.
Shank | C2 Carbide | C6 Carbide | Micrograin Carbide | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Overall Lg. | No. of Pieces | Includes | Mfr. | For Use On | Each | For Use On | Each | For Use On | Each | |||||
For Along-the-Length Turning, Boring, Chamfering, External Grooving, External Threading, and Facing | ||||||||||||||||
| 1/4" | 1/4" | 2" | 7 | One AL-4 left hand lathe tool One AR-4 right hand lathe tool One BL-4 left hand lathe tool One BR-4 right hand lathe tool One C-4 neutral lathe tool One D-4 neutral lathe tool One E-4 neutral lathe tool | Clapp & Haney | Aluminum, Brass, Bronze | 3367A11 | 000000 | Steel | 3367A12 | 000000 | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 3367A24 | 000000 | ||
| 5/16" | 5/16" | 2 1/4" | 7 | One AL-5 left hand lathe tool One AR-5 right hand lathe tool One BL-5 left hand lathe tool One BR-5 right hand lathe tool One C-5 neutral lathe tool One D-5 neutral lathe tool One E-5 neutral lathe tool | Clapp & Haney | Aluminum, Brass, Bronze | 3367A13 | 00000 | Steel | 3367A14 | 00000 | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 3367A25 | 00000 | ||
| 3/8" | 3/8" | 2 1/2" | 7 | One AL-6 left hand lathe tool One AR-6 right hand lathe tool One BL-6 left hand lathe tool One BR-6 right hand lathe tool One C-6 neutral lathe tool One D-6 neutral lathe tool One E-6 neutral lathe tool | Clapp & Haney | Aluminum, Brass, Bronze | 3367A15 | 00000 | Steel | 3367A16 | 00000 | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 3367A26 | 00000 | ||
| 1/2" | 1/2" | 3 1/2" | 7 | One AL-8 left hand lathe tool One AR-8 right hand lathe tool One BL-8 left hand lathe tool One BR-8 right hand lathe tool One C-8 neutral lathe tool One D-8 neutral lathe tool One E-8 neutral lathe tool | Clapp & Haney | Aluminum, Brass, Bronze | 3367A17 | 00000 | Steel | 3367A18 | 00000 | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 3367A27 | 00000 | ||
| 5/8" | 5/8" | 4" | 7 | One AL-10 left hand lathe tool One AR-10 right hand lathe tool One BL-10 left hand lathe tool One BR-10 right hand lathe tool One C-10 neutral lathe tool One D-10 neutral lathe tool One E-10 neutral lathe tool | Clapp & Haney | Aluminum, Brass, Bronze | 3367A19 | 00000 | Steel | 3367A21 | 00000 | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 3367A28 | 000000 | ||
| 3/4" | 3/4" | 3 1/2" | 7 | One AL-12 left hand lathe tool One AR-12 right hand lathe tool One BL-12 left hand lathe tool One BR-12 right hand lathe tool One C-12 neutral lathe tool One D-12 neutral lathe tool One E-12 neutral lathe tool | Clapp & Haney | Aluminum, Brass, Bronze | 3367A22 | 000000 | Steel | 3367A23 | 000000 | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 3367A29 | 000000 | ||
Small-Diameter Round-Shank Boring Lathe Tools
 |  |
Style 1 | Style 2 |
 |  |
Style 3 |
These are the smallest boring tools we offer. Use them to enlarge existing holes to precise diameters. Made entirely of micrograin carbide, which outperforms C2 and C6 carbide when cutting difficult-to-machine metal, such as stainless steel or titanium. It provides a good finish on most materials. Tools have flats on the shank for quick alignment.
Style 3—Style 3 tools have an extra long shank for boring in deep holes.
Style | Min. Hole Dia. | Max. Hole Dp. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand Cutting Direction | |||||||||||
1/8" Diameter Shank | |||||||||||
| 1 | 0.015" | 0.05" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A72 | 000000 | ||
| 1 | 0.02" | 0.075" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A73 | 00000 | ||
| 1 | 0.025" | 0.1" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A74 | 00000 | ||
| 1 | 0.03" | 0.1" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A75 | 00000 | ||
| 1 | 0.035" | 0.1" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A76 | 00000 | ||
| 1 | 0.035" | 0.15" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A77 | 00000 | ||
| 1 | 0.04" | 0.1" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A78 | 00000 | ||
| 1 | 0.04" | 0.15" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A79 | 00000 | ||
| 1 | 0.045" | 0.1" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A81 | 00000 | ||
| 1 | 0.045" | 0.15" | 1 1/2" | 2° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A82 | 00000 | ||
| 2 | 0.05" | 0.15" | 2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A11 | 00000 | ||
| 2 | 0.06" | 0.3" | 2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A15 | 00000 | ||
| 2 | 0.08" | 1/2" | 2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A22 | 00000 | ||
| 2 | 0.1" | 1/2" | 2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A25 | 00000 | ||
3/16" Diameter Shank | |||||||||||
| 2 | 0.12" | 0.7" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A32 | 00000 | ||
| 2 | 0.14" | 0.4" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A34 | 00000 | ||
| 2 | 0.16" | 0.6" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A37 | 00000 | ||
1/4" Diameter Shank | |||||||||||
| 2 | 0.18" | 0.35" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A39 | 00000 | ||
| 2 | 0.18" | 1/2" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A41 | 00000 | ||
| 2 | 0.18" | 3/4" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A43 | 00000 | ||
| 2 | 0.18" | 1" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A44 | 00000 | ||
| 2 | 0.2" | 0.8" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A46 | 00000 | ||
| 2 | 0.2" | 1" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A47 | 00000 | ||
| 3 | 0.28" | 3 3/8" | 4 3/8" | 4° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A91 | 00000 | ||
5/16" Diameter Shank | |||||||||||
| 2 | 0.23" | 1" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A53 | 00000 | ||
| 2 | 0.23" | 1.2" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A54 | 00000 | ||
| 3 | 0.35" | 3 3/8" | 4 3/8" | 4° | 5° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A92 | 000000 | ||
3/8" Diameter Shank | |||||||||||
| 2 | 0.32" | 1" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A59 | 00000 | ||
| 2 | 0.36" | 1 1/2" | 2 1/2" | 4° | 2° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Internal Tool | 3301A65 | 00000 | ||
Quick-Change Lathe Tools and Holders
Holders
 |
Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Head Dia. | Overall Lg. | Material | Tool Change Repeatability from Centerline | Mfr. | Each | |||
For 3/16" Diameter Tool Bit Shanks | ||||||||||
| 1/2" | 1/2" | 3/4" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N1 | 0000000 | ||
| 3/4" | 3/4" | 1.06" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N4 | 000000 | ||
For 1/4" Diameter Tool Bit Shanks | ||||||||||
| 1/2" | 1/2" | 3/4" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N2 | 000000 | ||
| 3/4" | 3/4" | 1.06" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N5 | 000000 | ||
For 5/16" Diameter Tool Bit Shanks | ||||||||||
| 1/2" | 1/2" | 7/8" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N3 | 000000 | ||
| 3/4" | 3/4" | 1.06" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N6 | 000000 | ||
For 3/8" Diameter Tool Bit Shanks | ||||||||||
| 3/4" | 3/4" | 1.06" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N7 | 000000 | ||
For 1/2" Diameter Tool Bit Shanks | ||||||||||
| 3/4" | 3/4" | 1.06" | 4.8" | Steel | -0.0005" to 0.0005" | Micro 100 | 1399N8 | 000000 | ||
Internal Threading Tools—Right Hand
 |  |  |
Min. Hole Dia. | Max. Hole Dp. | Offset | Material | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|
3/16" Diameter Shank | |||||||||
| 0.08" | 1/2" | 0.02" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N5 | 000000 | ||
| 0.1" | 0.6" | 0.025" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N6 | 00000 | ||
| 0.11" | 3/4" | 0.03" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N7 | 00000 | ||
| 0.16" | 1" | 0.04" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N11 | 00000 | ||
1/4" Diameter Shank | |||||||||
| 0.18" | 1" | 0.04" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N12 | 00000 | ||
| 0.2" | 1" | 0.045" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N13 | 00000 | ||
5/16" Diameter Shank | |||||||||
| 0.23" | 0.4" | 0.055" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N15 | 00000 | ||
| 0.23" | 1 1/2" | 0.055" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N14 | 00000 | ||
| 0.29" | 1 3/4" | 0.07" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N16 | 00000 | ||
3/8" Diameter Shank | |||||||||
| 0.32" | 1.8" | 0.075" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N17 | 000000 | ||
| 0.36" | 1.8" | 0.085" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N18 | 000000 | ||
1/2" Diameter Shank | |||||||||
| 0.46" | 2" | 0.12" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N19 | 000000 | ||
| 0.49" | 2" | 0.12" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1433N21 | 000000 | ||
Boring Tools—Right Hand
 |  |
Boring tools enlarge existing holes to precise diameters.
Min. Hole Dia. | Max. Hole Dp. | Offset | Tip Radius | Material | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
3/16" Diameter Shank | ||||||||||
| 0.05" | 0.4" | 0.013" | 0.000" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N11 | 000000 | ||
| 0.06" | 1/2" | 0.015" | 0.000" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N12 | 00000 | ||
| 0.08" | 0.6" | 0.02" | 0.000" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N13 | 00000 | ||
| 0.1" | 0.7" | 0.025" | 0.000" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N14 | 00000 | ||
| 0.11" | 0.7" | 0.028" | 0.003" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N15 | 00000 | ||
| 0.12" | 0.8" | 0.03" | 0.003" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N16 | 00000 | ||
| 0.14" | 0.8" | 0.035" | 0.003" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N17 | 00000 | ||
| 0.16" | 1" | 0.04" | 0.003" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N18 | 00000 | ||
1/4" Diameter Shank | ||||||||||
| 0.18" | 1/2" | 0.045" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N23 | 00000 | ||
| 0.18" | 3/4" | 0.045" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N24 | 00000 | ||
| 0.18" | 1" | 0.045" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N19 | 00000 | ||
| 0.18" | 1 1/4" | 0.045" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N21 | 00000 | ||
| 0.18" | 1 1/2" | 0.045" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N22 | 00000 | ||
| 0.2" | 3/4" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N29 | 00000 | ||
| 0.2" | 1" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N25 | 00000 | ||
| 0.2" | 1.2" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N26 | 00000 | ||
| 0.2" | 1 1/2" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N27 | 00000 | ||
5/16" Diameter Shank | ||||||||||
| 0.23" | 1/2" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N35 | 00000 | ||
| 0.23" | 1" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N31 | 00000 | ||
| 0.23" | 1 1/4" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N32 | 00000 | ||
| 0.23" | 1 1/2" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N33 | 00000 | ||
| 0.29" | 1/2" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N42 | 00000 | ||
| 0.29" | 1" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N37 | 00000 | ||
| 0.29" | 1 1/4" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N38 | 00000 | ||
| 0.29" | 1 3/4" | 0.05" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N41 | 00000 | ||
3/8" Diameter Shank | ||||||||||
| 0.32" | 1" | 0.08" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N44 | 000000 | ||
| 0.32" | 1 1/4" | 0.08" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N45 | 000000 | ||
| 0.32" | 1 1/2" | 0.08" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N46 | 000000 | ||
| 0.32" | 2" | 0.08" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N48 | 000000 | ||
| 0.36" | 1" | 0.09" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N51 | 000000 | ||
| 0.36" | 1 1/4" | 0.09" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N52 | 000000 | ||
| 0.36" | 2 1/2" | 0.09" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N56 | 000000 | ||
1/2" Diameter Shank | ||||||||||
| 0.46" | 1" | 0.115" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N57 | 000000 | ||
| 0.46" | 1 1/2" | 0.115" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N59 | 000000 | ||
| 0.49" | 2" | 0.123" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N64 | 000000 | ||
| 0.49" | 3" | 0.123" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1738N66 | 000000 | ||
Retaining Ring Grooving Tools—Right Hand
 |  |  |
Min. Hole Dia. | Max. Hole Dp. | Groove Wd. | Offset | Material | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
3/16" Diameter Shank | ||||||||||
| 0.18" | 5/8" | 0.017" | 0.03" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N11 | 000000 | ||
| 0.18" | 5/8" | 0.02" | 0.03" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N12 | 00000 | ||
1/4" Diameter Shank | ||||||||||
| 0.245" | 5/8" | 0.025" | 0.05" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N13 | 00000 | ||
| 0.245" | 5/8" | 0.03" | 0.05" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N14 | 00000 | ||
5/16" Diameter Shank | ||||||||||
| 0.31" | 3/4" | 0.033" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N15 | 00000 | ||
| 0.31" | 3/4" | 0.038" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N16 | 00000 | ||
3/8" Diameter Shank | ||||||||||
| 0.37" | 1 1/4" | 0.039" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N17 | 00000 | ||
| 0.37" | 1 1/4" | 0.046" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N18 | 00000 | ||
| 0.37" | 1 1/4" | 0.055" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N19 | 00000 | ||
| 0.37" | 1 1/4" | 0.062" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N22 | 00000 | ||
| 0.37" | 1 1/4" | 0.069" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N23 | 00000 | ||
| 0.37" | 1 1/4" | 0.079" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N24 | 00000 | ||
| 0.37" | 1 1/4" | 0.087" | 0.1" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N25 | 00000 | ||
1/2" Diameter Shank | ||||||||||
| 0.495" | 1 1/2" | 0.093" | 0.15" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N26 | 000000 | ||
| 0.495" | 1 1/2" | 0.118" | 0.15" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N27 | 000000 | ||
| 0.495" | 1 1/2" | 1/8" | 0.15" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N28 | 000000 | ||
| 0.495" | 1 1/2" | 0.187" | 0.15" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1463N31 | 000000 | ||
Face Grooving Tools—Right Hand
 |  |  |
Groove | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Min. Dia. | Material | For Use On | Mfr. | Each | |||
3/16" Diameter Shank | |||||||||
| 0.02" | 0.05" | 0.19" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N11 | 000000 | ||
| 0.03" | 0.05" | 0.19" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N12 | 00000 | ||
1/4" Diameter Shank | |||||||||
| 0.02" | 0.05" | 0.24" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N13 | 00000 | ||
| 0.03" | 0.05" | 0.24" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N14 | 00000 | ||
| 0.03" | 0.05" | 0.26" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N16 | 00000 | ||
5/16" Diameter Shank | |||||||||
| 0.03" | 0.05" | 0.322" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N17 | 00000 | ||
| 0.04" | 0.05" | 0.322" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N18 | 00000 | ||
| 0.062" | 0.1" | 0.322" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N19 | 00000 | ||
3/8" Diameter Shank | |||||||||
| 0.062" | 0.1" | 0.385" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N21 | 00000 | ||
| 0.078" | 0.1" | 0.385" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N22 | 00000 | ||
| 0.093" | 0.1" | 0.385" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N23 | 00000 | ||
| 0.118" | 0.15" | 0.385" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N24 | 00000 | ||
| 1/8" | 0.15" | 0.385" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N25 | 00000 | ||
1/2" Diameter Shank | |||||||||
| 0.062" | 0.1" | 0.48" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N26 | 000000 | ||
| 0.078" | 0.1" | 0.5" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N34 | 000000 | ||
| 0.093" | 0.1" | 0.48" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N28 | 000000 | ||
| 0.118" | 0.15" | 0.5" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N36 | 000000 | ||
| 1/8" | 0.15" | 0.5" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1703N37 | 000000 | ||
Internal Profiling Tools—Right Hand
 |  |  |
Min. Hole Dia. | Max. Hole Dp. | Offset | Tip Radius | Material | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
3/16" Diameter Shank | ||||||||||
| 0.07" | 1/2" | 0.025" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N1 | 000000 | ||
| 0.12" | 3/4" | 0.05" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N6 | 00000 | ||
| 0.16" | 1" | 0.05" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N7 | 00000 | ||
1/4" Diameter Shank | ||||||||||
| 0.18" | 1/2" | 0.08" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N9 | 00000 | ||
| 0.18" | 1" | 0.08" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N8 | 00000 | ||
5/16" Diameter Shank | ||||||||||
| 0.23" | 1 1/4" | 0.08" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N12 | 00000 | ||
3/8" Diameter Shank | ||||||||||
| 0.36" | 1" | 0.13" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N14 | 00000 | ||
| 0.36" | 1 1/4" | 0.13" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 1430N15 | 00000 | ||
Economy Indexable Lathe Tools
For Along-the-Length Turning, Boring, Chamfering, and Facing
 |  |  |  |
Style A, Right Hand | Style A, Left Hand | Style B, Right Hand | Style B, Left Hand |
 |  |
Style A, Right Hand | Style A, Left Hand |
 |  |
Style B, Right Hand | Style B, Left Hand |
Tools | Replacement Round Head Screws | Replacement Flat Head Screws | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | Insert | |||||||||||||||||||
Tool Bit Code | Wd. | Ht. | Overall Lg. | Material | End Cutting Edge Angle | Side Cutting Edge Angle | For Use On | Code | Inscribed Circle Dia. (IC) | Thk. | Includes | Mfr. | Each | Each | Each | |||||
Style A—Right Hand | ||||||||||||||||||||
| AR-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 30° | 0° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3240A101 | 000000 | 3240A211 | 00000 | ——— | 0 | ||
| AR-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 30° | 0° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A105 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| AR-10 | 5/8" | 5/8" | 4" | Carbon Steel | 30° | 0° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A109 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| AR-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 30° | 0° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A114 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| AR-16 | 1" | 1" | 6" | Carbon Steel | 30° | 0° | Steel | TPMT-431 | 1/2" | 3/16" | One TPMT-431 Insert | Borite | 3240A411 | 00000 | ——— | 0 | 3240A334 | 00000 | ||
Style A—Left Hand | ||||||||||||||||||||
| AL-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 30° | 0° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3240A102 | 00000 | 3240A211 | 0000 | ——— | 0 | ||
| AL-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 30° | 0° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A106 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| AL-10 | 5/8" | 5/8" | 4" | Carbon Steel | 30° | 0° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A111 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| AL-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 30° | 0° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A115 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| AL-16 | 1" | 1" | 6" | Carbon Steel | 30° | 0° | Steel | TPMT-431 | 1/2" | 3/16" | One TPMT-431 Insert | Borite | 3240A412 | 00000 | ——— | 0 | 3240A334 | 0000 | ||
Style B—Right Hand | ||||||||||||||||||||
| BR-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 45° | 15° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3240A103 | 00000 | 3240A211 | 0000 | ——— | 0 | ||
| BR-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 45° | 15° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A107 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| BR-10 | 5/8" | 5/8" | 4" | Carbon Steel | 45° | 15° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A112 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| BR-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 45° | 15° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A116 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| BR-16 | 1" | 1" | 6" | Carbon Steel | 45° | 15° | Steel | TPMT-431 | 1/2" | 3/16" | One TPMT-431 Insert | Borite | 3240A413 | 00000 | ——— | 0 | 3240A334 | 0000 | ||
Style B—Left Hand | ||||||||||||||||||||
| BL-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 45° | 15° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3240A104 | 00000 | 3240A211 | 0000 | ——— | 0 | ||
| BL-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 45° | 15° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A108 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| BL-10 | 5/8" | 5/8" | 4" | Carbon Steel | 45° | 15° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A113 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| BL-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 45° | 15° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A117 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| BL-16 | 1" | 1" | 6" | Carbon Steel | 45° | 15° | Steel | TPMT-431 | 1/2" | 3/16" | One TPMT-431 Insert | Borite | 3240A414 | 00000 | ——— | 0 | 3240A334 | 0000 | ||
 |  |
Each | Package | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | For Use On | Each | Pkg. Qty. | Pkg. | ||||
Uncoated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A132 | 000000 | 10 | 3240A129 | 0000000 | ||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A131 | 00000 | 10 | 3240A123 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A135 | 00000 | 10 | 3240A252 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A134 | 00000 | 10 | 3240A16 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Aluminum, Brass, Bronze | 3240A138 | 00000 | 10 | 3240A445 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A137 | 00000 | 10 | 3240A303 | 000000 | ||
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Aluminum, Brass, Bronze | 3240A142 | 00000 | 10 | 3240A56 | 000000 | ||
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A141 | 00000 | 10 | 3240A509 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Aluminum, Brass, Bronze | 1691N111 | 00000 | 10 | 1691N121 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N113 | 00000 | 10 | 1691N123 | 000000 | ||
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | Aluminum, Brass, Bronze | 1691N112 | 00000 | 10 | 1691N122 | 000000 | ||
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N114 | 00000 | 10 | 1691N124 | 000000 | ||
Titanium Nitride (TiN) Coated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A133 | 00000 | 10 | 3240A13 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A136 | 00000 | 10 | 3240A259 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A139 | 00000 | 10 | 3240A495 | 000000 | ||
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A143 | 00000 | 10 | 3240A758 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N115 | 00000 | 10 | 1691N125 | 000000 | ||
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N116 | 00000 | 10 | 1691N126 | 000000 | ||
For Along-the-Length Turning, Chamfering, External Profiling, Facing, and Internal Profiling
 |  |  |
Style V, Left Hand | Style V, Right Hand | Style V, Neutral |
 |  |
Style V, Left Hand | Style V, Right Hand |
 | |
Style V, Neutral |
Tools | Replacement Round Head Screws | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | Insert | |||||||||||||||||
Tool Bit Code | Wd. | Ht. | Overall Lg. | Material | End Cutting Edge Angle | Side Cutting Edge Angle | For Use On | Code | Inscribed Circle Dia. (IC) | Thk. | Includes | Mfr. | Each | Each | ||||
Style V—Left Hand | ||||||||||||||||||
| VL-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A415 | 000000 | 3240A212 | 00000 | ||
| VL-10 | 5/8" | 5/8" | 4" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A418 | 00000 | 3240A212 | 0000 | ||
| VL-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A422 | 00000 | 3240A212 | 0000 | ||
| VL-16 | 1" | 1" | 6" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A425 | 00000 | 3240A212 | 0000 | ||
Style V—Right Hand | ||||||||||||||||||
| VR-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A417 | 00000 | 3240A212 | 0000 | ||
| VR-10 | 5/8" | 5/8" | 4" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A421 | 00000 | 3240A212 | 0000 | ||
| VR-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A424 | 00000 | 3240A212 | 0000 | ||
| VR-16 | 1" | 1" | 6" | Carbon Steel | 52.5° | 2.5° | Steel | VCMT-32.52 | 3/8" | 5/32" | One VCMT-32.52 Insert | Borite | 3240A427 | 00000 | 3240A212 | 0000 | ||
Style V—Neutral | ||||||||||||||||||
| VE-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 72.5° | 17.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A416 | 00000 | 3240A212 | 0000 | ||
| VE-10 | 5/8" | 5/8" | 4" | Carbon Steel | 72.5° | 17.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A419 | 00000 | 3240A212 | 0000 | ||
| VE-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 72.5° | 17.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A423 | 00000 | 3240A212 | 0000 | ||
| VE-16 | 1" | 1" | 6" | Carbon Steel | 72.5° | 17.5° | Steel | VCMT-32.52 | 3/8" | 3/16" | One VCMT-32.52 Insert | Borite | 3240A426 | 00000 | 3240A212 | 0000 | ||
 |  |
Each | Package | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | For Use On | Each | Pkg. Qty. | Pkg. | ||||
Uncoated | |||||||||||||
| VCMT-32.52 | 3/8" | 5/32" | 0.65" | 1/32" | VE-8, VE-10, VE-12, VE-16, VL-8, VL-10, VL-12, VL-16, VR-8, VR-10, VR-12, VR-16 | Aluminum, Brass, Bronze | 1691N117 | 000000 | 10 | 1691N127 | 0000000 | ||
| VCMT-32.52 | 3/8" | 5/32" | 0.65" | 1/32" | VE-8, VE-10, VE-12, VE-16, VL-8, VL-10, VL-12, VL-16, VR-8, VR-10, VR-12, VR-16 | Steel | 1691N119 | 00000 | 10 | 1691N129 | 000000 | ||
Titanium Nitride (TiN) Coated | |||||||||||||
| VCMT-32.52 | 3/8" | 5/32" | 0.65" | 1/32" | VE-8, VE-10, VE-12, VE-16, VL-8, VL-10, VL-12, VL-16, VR-8, VR-10, VR-12, VR-16 | Steel | 1691N118 | 00000 | 10 | 1691N128 | 000000 | ||
Small-Diameter Boring Lathe Tool Sets
 | |
This set contains some of the smallest boring tools we offer. Use them to enlarge existing holes to precise diameters. Made entirely of micrograin carbide, which outperforms C2 and C6 carbide when cutting difficult-to-machine metal, such as stainless steel or titanium. It provides a good finish on most materials. Tools have flats on the shank for quick alignment.
Shank Dia. | No. of Pieces | Includes | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|
Right-Hand Cutting Direction | ||||||||
| 1/8" | 6 | One 1 1/2" lg. boring tool for 0.020" min. hole dia. and 0.075" max. hole dp. One 1 1/2" lg. boring tool for 0.025" min. hole dia. and 0.100" max. hole dp. One 1 1/2" lg. boring tool for 0.030" min. hole dia. and 0.100" max. hole dp. One 1 1/2" lg. boring tool for 0.035" min. hole dia. and 0.100" max. hole dp. One 1 1/2" lg. boring tool for 0.040" min. hole dia. and 0.150" max. hole dp. One 1 1/2" lg. boring tool for 0.045" min. hole dia. and 0.150" max. hole dp. | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Micro 100 | 3301A71 | 0000000 | ||
Internal Grooving Lathe Tools for O-Rings
 |
 |  |
0.031"-0.071" Groove Wd. | 0.098"-0.243" Groove Wd. |
 |
Groove Wd. | Min. Hole Dia. | Max. Hole Dp. | Offset | Taper | Shank Dia. | Overall Lg. | Material | For Use On | Mfr. | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.031" | 1/4" | 5/8" | 0.05" | — | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A17 | 000000 | |
| 0.041" | 3/8" | 5/8" | 0.1" | — | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A18 | 00000 | |
| 0.057" | 3/8" | 3/4" | 0.1" | — | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A19 | 00000 | |
| 0.064" | 3/8" | 3/4" | 0.1" | — | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A21 | 00000 | |
| 0.071" | 3/8" | 1" | 0.1" | — | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A22 | 00000 | |
| 0.098" | 1/4" | 1/2" | 0.1" | 5° | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A11 | 00000 | |
| 0.143" | 1/4" | 9/16" | 0.1" | 5° | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A12 | 00000 | |
| 0.146" | 1/4" | 5/8" | 0.1" | 5° | 1/4" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A13 | 00000 | |
| 0.176" | 3/8" | 3/4" | 0.115" | 5° | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A14 | 00000 | |
| 0.21" | 3/8" | 13/16" | 0.115" | 5° | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A15 | 00000 | |
| 0.243" | 3/8" | 15/16" | 0.115" | 5° | 3/8" | 2 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel | Internal Tool | 3373A16 | 00000 |
Solid Carbide Internal Threading Lathe Tools
 |  |
Made of solid carbide, these tools provide more rigidity than carbide-tipped tools. Use them to create internal Acme threads or V-shaped UNC, UNS, and UNF threads. All have flats on the shank for quick alignment.
V-Shaped Threads (UNC, UNF, UNS)
 |
Threads per In. | Min. Hole Dia. | Max. Hole Dp. | Offset | Shank Dia. | Overall Lg. | Material | Nose Angle | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand Cutting Direction | |||||||||||||
| 8 to 24 | 0.49" | 3/4" | 0.12" | 1/2" | 3" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A33 | 000000 | ||
| 10 to 32 | 0.32" | 3/4" | 0.075" | 3/8" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A29 | 00000 | ||
| 10 to 32 | 0.36" | 3/4" | 0.085" | 3/8" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A31 | 00000 | ||
| 10 to 32 | 0.36" | 1" | 0.085" | 3/8" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A32 | 00000 | ||
| 12 to 40 | 0.29" | 1" | 0.07" | 5/16" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A28 | 00000 | ||
| 14 to 40 | 0.23" | 3/4" | 0.055" | 5/16" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A26 | 00000 | ||
| 14 to 40 | 0.23" | 1" | 0.055" | 5/16" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A27 | 00000 | ||
| 16 to 40 | 0.2" | 0.6" | 0.045" | 1/4" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A25 | 00000 | ||
| 18 to 56 | 0.18" | 1/2" | 0.04" | 1/4" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A23 | 00000 | ||
| 18 to 56 | 0.18" | 3/4" | 0.04" | 1/4" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A24 | 00000 | ||
| 20 to 56 | 0.14" | 0.3" | 0.035" | 3/16" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A22 | 00000 | ||
| 24 to 56 | 0.12" | 0.3" | 0.03" | 3/16" | 2 1/2" | Micrograin Carbide | 60° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A21 | 00000 | ||
Acme Threads
 |
Threads per In. | Min. Hole Dia. | Max. Hole Dp. | Offset | Shank Dia. | Overall Lg. | Material | Nose Angle | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand Cutting Direction | |||||||||||||
| 4 | 0.49" | 2" | 0.15" | 1/2" | 3" | Micrograin Carbide | 29° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A36 | 000000 | ||
| 5 | 0.49" | 2" | 0.12" | 1/2" | 3" | Micrograin Carbide | 29° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A34 | 00000 | ||
| 6 | 0.49" | 2" | 0.12" | 1/2" | 3" | Micrograin Carbide | 29° | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 3369A35 | 00000 | ||
Round-Shank Boring Lathe Tools
 |  |
Use these tools to enlarge existing holes to precise diameters. All have an offset taper that provides additional clearance to prevent chips from clogging the hole.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Tip | C2 Carbide | C6 Carbide | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. Hole Dia. | Max. Hole Dp. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Wd. | Lg. | Thk. | Mfr. | For Use On | Each | For Use On | Each | ||||
Right-Hand Cutting Direction | ||||||||||||||||
3/8" Diameter Shank | ||||||||||||||||
| 5/16" | 3/4" | 2" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A611 | 000000 | Steel | 3296A511 | 000000 | ||
| 5/16" | 1 1/8" | 2 3/8" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A612 | 00000 | Steel | 3296A512 | 00000 | ||
| 5/16" | 1 1/2" | 2 3/4" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A613 | 00000 | Steel | 3296A513 | 00000 | ||
| 3/8" | 15/16" | 2 3/16" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A614 | 00000 | Steel | 3296A514 | 00000 | ||
| 3/8" | 1 13/32" | 2 21/32" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A615 | 00000 | Steel | 3296A515 | 00000 | ||
| 3/8" | 1 7/8" | 3 1/8" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A616 | 00000 | Steel | 3296A516 | 00000 | ||
| 7/16" | 1 1/8" | 2 3/8" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A617 | 00000 | Steel | 3296A517 | 00000 | ||
| 7/16" | 1 11/16" | 2 15/16" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A618 | 00000 | Steel | 3296A518 | 00000 | ||
| 7/16" | 2 1/4" | 3 1/2" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A619 | 00000 | Steel | 3296A519 | 00000 | ||
1/2" Diameter Shank | ||||||||||||||||
| 5/16" | 3/4" | 2 1/4" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A631 | 00000 | Steel | 3296A531 | 00000 | ||
| 5/16" | 1 1/8" | 2 5/8" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A632 | 00000 | Steel | 3296A532 | 00000 | ||
| 5/16" | 1 1/2" | 3" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A633 | 00000 | Steel | 3296A533 | 00000 | ||
| 7/16" | 1 1/8" | 2 5/8" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A634 | 00000 | Steel | 3296A534 | 00000 | ||
| 7/16" | 1 11/16" | 3 3/16" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A635 | 00000 | Steel | 3296A535 | 00000 | ||
| 7/16" | 2 1/4" | 3 3/4" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A636 | 00000 | Steel | 3296A536 | 00000 | ||
| 9/16" | 1 1/2" | 3" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A637 | 00000 | Steel | 3296A537 | 00000 | ||
| 9/16" | 2 1/4" | 3 3/4" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A638 | 00000 | Steel | 3296A538 | 00000 | ||
| 9/16" | 3" | 4 1/2" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A639 | 00000 | Steel | 3296A539 | 00000 | ||
5/8" Diameter Shank | ||||||||||||||||
| 5/16" | 3/4" | 2 1/4" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A412 | 00000 | Steel | 3296A416 | 00000 | ||
| 5/16" | 1 1/8" | 2 5/8" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A422 | 00000 | Steel | 3296A426 | 00000 | ||
| 5/16" | 1 1/2" | 3" | 5° | 0° | 3/16" | 1/4" | 1/16" | Borite | Aluminum, Brass, Bronze | 3296A432 | 00000 | Steel | 3296A436 | 00000 | ||
| 7/16" | 1 1/8" | 2 5/8" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A442 | 00000 | Steel | 3296A446 | 00000 | ||
| 7/16" | 1 11/16" | 3 3/16" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A452 | 00000 | Steel | 3296A456 | 00000 | ||
| 7/16" | 2 1/4" | 3 3/4" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A462 | 00000 | Steel | 3296A466 | 00000 | ||
| 9/16" | 1 1/2" | 3" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A472 | 00000 | Steel | 3296A476 | 00000 | ||
| 9/16" | 2 1/4" | 3 3/4" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A482 | 00000 | Steel | 3296A486 | 00000 | ||
| 9/16" | 3" | 4 1/2" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A492 | 00000 | Steel | 3296A496 | 00000 | ||
| 11/16" | 1 7/8" | 3 3/8" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A522 | 00000 | Steel | 3296A526 | 00000 | ||
| 11/16" | 2 13/16" | 4 5/16" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A542 | 00000 | Steel | 3296A546 | 00000 | ||
| 11/16" | 3 3/4" | 5 1/4" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A572 | 00000 | Steel | 3296A576 | 00000 | ||
3/4" Diameter Shank | ||||||||||||||||
| 7/16" | 1 1/8" | 3 1/8" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A651 | 00000 | Steel | 3296A551 | 00000 | ||
| 7/16" | 1 11/16" | 3 11/16" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A652 | 00000 | Steel | 3296A552 | 00000 | ||
| 7/16" | 2 1/4" | 4 1/4" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A653 | 00000 | Steel | 3296A553 | 00000 | ||
| 9/16" | 1 1/2" | 3 1/2" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A654 | 00000 | Steel | 3296A554 | 00000 | ||
| 9/16" | 2 1/4" | 4 1/4" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A655 | 00000 | Steel | 3296A555 | 00000 | ||
| 9/16" | 3" | 5" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A656 | 00000 | Steel | 3296A556 | 00000 | ||
| 11/16" | 1 7/8" | 3 7/8" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A657 | 00000 | Steel | 3296A557 | 00000 | ||
| 11/16" | 2 13/16" | 4 13/16" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A658 | 00000 | Steel | 3296A558 | 00000 | ||
| 11/16" | 3 3/4" | 5 3/4" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A659 | 00000 | Steel | 3296A559 | 00000 | ||
| 13/16" | 2 1/4" | 4 1/4" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A661 | 00000 | Steel | 3296A561 | 00000 | ||
| 13/16" | 3 3/8" | 5 3/8" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A662 | 00000 | Steel | 3296A562 | 00000 | ||
| 13/16" | 4 1/2" | 6 1/2" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A663 | 00000 | Steel | 3296A563 | 00000 | ||
1" Diameter Shank | ||||||||||||||||
| 9/16" | 3" | 5" | 5° | 0° | 3/16" | 5/16" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A681 | 00000 | Steel | 3296A581 | 00000 | ||
| 11/16" | 3 3/4" | 5 3/4" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A682 | 00000 | Steel | 3296A582 | 00000 | ||
| 7/8" | 4 1/2" | 6 1/2" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A683 | 00000 | Steel | 3296A583 | 00000 | ||
| 1 1/16" | 4 1/2" | 6 1/2" | 5° | 0° | 1/4" | 1/2" | 3/32" | Borite | Aluminum, Brass, Bronze | 3296A684 | 000000 | Steel | 3296A584 | 000000 | ||
Diamond-Tipped Turning Lathe Tools
For Along-the-Length Turning, Boring, Chamfering, and Facing
 |  |
Right-Hand Cutting Direction | Left-Hand Cutting Direction |
 |
Right-Hand Cutting Direction |
 |
Left-Hand Cutting Direction |
Tool Bit | Shank | Tip | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Code | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | For Use On | Mfr. | Each | |||
Right-Hand Cutting Direction | ||||||||||||||||
Diamond | ||||||||||||||||
| A | AR-4 | 1/4" | 1/4" | 2" | 0° | 6° | 0.015" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A32 | 0000000 | ||
| A | AR-6 | 3/8" | 3/8" | 2 1/2" | 0° | 6° | 0.015" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A34 | 000000 | ||
| A | AR-8 | 1/2" | 1/2" | 3 1/2" | 0° | 6° | 0.030" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A36 | 00000 | ||
Left-Hand Cutting Direction | ||||||||||||||||
Diamond | ||||||||||||||||
| A | AL-4 | 1/4" | 1/4" | 2" | 0° | 6° | 0.015" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A42 | 00000 | ||
| A | AL-6 | 3/8" | 3/8" | 2 1/2" | 0° | 6° | 0.015" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A44 | 00000 | ||
| A | AL-8 | 1/2" | 1/2" | 3 1/2" | 0° | 6° | 0.030" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A46 | 00000 | ||
Internal Profiling Lathe Tools
For Internal Profiling
 |  |  |
Shank Dia. | Min. Hole Dia. | Max. Hole Dp. | Offset | Overall Lg. | Tip Radius | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand Cutting Direction | |||||||||||
Micrograin Carbide | |||||||||||
| 1/8" | 0.09" | 0.3" | 0.04" | 2" | 0.005" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N11 | 000000 | ||
| 1/8" | 0.12" | 1/4" | 0.05" | 2" | 0.007" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N12 | 00000 | ||
| 1/8" | 0.12" | 1/2" | 0.05" | 2" | 0.007" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N13 | 00000 | ||
| 3/16" | 0.18" | 1/2" | 0.08" | 2 1/2" | 0.010" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N14 | 00000 | ||
| 3/16" | 0.18" | 3/4" | 0.08" | 2 1/2" | 0.010" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N15 | 00000 | ||
| 1/4" | 0.22" | 1/2" | 0.08" | 2 1/2" | 0.010" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N16 | 00000 | ||
| 1/4" | 0.22" | 3/4" | 0.08" | 2 1/2" | 0.010" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N17 | 00000 | ||
| 1/4" | 0.22" | 1" | 0.08" | 2 1/2" | 0.010" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N18 | 00000 | ||
| 5/16" | 0.3" | 3/4" | 0.11" | 2 1/2" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N19 | 00000 | ||
| 5/16" | 0.3" | 1" | 0.11" | 2 1/2" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N21 | 00000 | ||
| 3/8" | 0.36" | 3/4" | 0.13" | 2 1/2" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N22 | 00000 | ||
| 3/8" | 0.36" | 1" | 0.13" | 2 1/2" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1377N23 | 00000 | ||
Square-Shank Boring Lathe Tools
 |  |
TSA | TSC |
 | |
TSE |
 |
TSA |
 |
TSC |
 |
TSE |
Insert the square shank of these tools into the slot of a boring tool holder and use them to enlarge existing holes to precise diameters.
TSA Tool Bit—TSA tools are for boring in a 90° boring tool holder.
TSC Tool Bit—TSC tools are for boring in a 60° boring tool holder.
TSE Tool Bit—TSE tools are for boring in a 45° boring tool holder.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C5 carbide when cutting aluminum, brass, and bronze.
C5 Carbide—C5 carbide tips hold up better than C2 carbide when making cuts in steel.
Shank | Tip | C2 Carbide | C5 Carbide | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit Code | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thk. | Mfr. | For Use On | Each | For Use On | Each | ||||
Right-Hand Cutting Direction | ||||||||||||||||||
TSA Tool Bit | ||||||||||||||||||
| TSA-5 | 5/16" | 5/16" | 1 1/2" | 0° | 8° | 1/64" | 3/16" | 5/16" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A544 | 000000 | Steel | 3367A541 | 000000 | ||
| TSA-6 | 3/8" | 3/8" | 1 3/4" | 0° | 8° | 1/64" | 3/16" | 5/16" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A545 | 00000 | Steel | 3367A542 | 00000 | ||
| TSA-8 | 1/2" | 1/2" | 2 1/2" | 0° | 8° | 1/32" | 5/16" | 7/16" | 1/8" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A546 | 00000 | Steel | 3367A543 | 00000 | ||
TSC Tool Bit | ||||||||||||||||||
| TSC-5 | 5/16" | 5/16" | 1 1/2" | 30° | 38° | 1/64" | 3/16" | 5/16" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A551 | 00000 | Steel | 3367A547 | 00000 | ||
| TSC-6 | 3/8" | 3/8" | 1 3/4" | 30° | 38° | 1/64" | 3/16" | 5/16" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A552 | 00000 | Steel | 3367A548 | 00000 | ||
| TSC-8 | 1/2" | 1/2" | 2 1/2" | 30° | 38° | 1/32" | 5/16" | 7/16" | 1/8" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A553 | 00000 | Steel | 3367A549 | 00000 | ||
TSE Tool Bit | ||||||||||||||||||
| TSE-5 | 5/16" | 5/16" | 1 1/2" | 45° | 52° | 1/64" | 3/16" | 5/16" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A41 | 00000 | Steel | 3367A42 | 00000 | ||
| TSE-6 | 3/8" | 3/8" | 1 3/4" | 45° | 52° | 1/64" | 3/16" | 5/16" | 3/32" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A43 | 00000 | Steel | 3367A44 | 00000 | ||
| TSE-8 | 1/2" | 1/2" | 2 1/2" | 45° | 52° | 1/32" | 5/16" | 7/16" | 1/8" | Clapp & Haney | Aluminum, Brass, Bronze | 3367A45 | 00000 | Steel | 3367A46 | 00000 | ||
Indexable Lathe Threading Tools
 |  |  |
3/8" Shank | 1/2" Shank | 3/4" Shank |
 |  |
External Threading | Internal Threading |
These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point. When all points dull, replace the insert rather than the whole tool.
3/8" Wide Shank—Tool with 3/8" shank can cut external right-hand threads.
1/2" Wide Shank—Tool with 1/2" shank can cut external right-hand threads with one end and internal right-hand threads with the other.
3/4" Wide Shank—Tool with 3/4" shank can cut external right- or left-hand threads. To cut right-hand threads install an insert in the pocket on the left side of the tool. To cut left-hand threads install an insert in the pocket on the right side of the tool.
Thread | Threads Per Inch | Insert | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. Hole Dia. | Max. Hole Dp. | Overall Lg. | Type | Shape | Angle | External | Internal | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thk. | Tip Radius | Mfr. | Each | |||
Right-Hand Cutting Direction | ||||||||||||||||||
3/8" Square Shank—For External Threading | ||||||||||||||||||
| — | — | 4 1/2" | UNC, UNF, UNS | V | 60° | 8 to 36 | 8 to 36 | Steel | Aluminum, Brass, Bronze, Plastic, Stainless Steel, Steel | TNMC-32NV, TPMC-32NV | 3/8" | 1/8" | 0.004" | Arthur R. Warner | 3264A11 | 0000000 | ||
1/2" Square Shank—For External Threading and Internal Threading | ||||||||||||||||||
| 1 3/8" | 1 1/4" | 5" | UNC, UNF, UNS | V | 60° | 8 to 36 | 8 to 36 | Steel | Aluminum, Brass, Bronze, Plastic, Stainless Steel, Steel | TNMC-32NV, TPMC-32NV | 3/8" | 1/8" | 0.004" | Arthur R. Warner | 3264A12 | 000000 | ||
Neutral Cutting Direction | ||||||||||||||||||
3/4" Square Shank—For External Threading | ||||||||||||||||||
| — | — | 4 3/8" | UNC, UNF, UNS | V | 60° | 8 to 36 | 8 to 36 | Steel | Aluminum, Brass, Bronze, Plastic, Stainless Steel, Steel | TNMC-32NV, TPMC-32NV | 3/8" | 1/8" | 0.004" | Arthur R. Warner | 3264A13 | 000000 | ||
Manual Lathe Knurling Tools
 |  |
Bump | Swivel Bump |
Press a grip into your workpiece using your manual lathe. These tools use knurls with smooth, rounded teeth to form grooves on your material. Upon contact with your material, the tool head adjusts to center the knurls for a consistent pattern. Use left and right-hand spiral knurls together to create a diamond pattern—common for tool handles—in one go. When your knurls wear out, you can pop them out and replace them. You can also swap the included spiral knurls for straight ones.
Swivel Bump—Swivel bump knurling tools have three sets of knurls that you can rotate between: coarse, medium, and fine pitch.
Shank | Knurl | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Min. Workpiece Size | Wd. | Ht. | Overall Lg. | Material | Dia. | Face Wd. | Hole Dia. | Material | Includes | For Use On | Mfr. | Each | |||
Bump | |||||||||||||||
2 Knurling Wheels | |||||||||||||||
| 1/4" | 5/16" | 3/4" | 6 1/4" | Steel | 5/8" | 5/16" | 7/32" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A111 | 0000000 | ||
| 1/4" | 3/8" | 7/8" | 6 1/4" | Steel | 5/8" | 5/16" | 7/32" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A112 | 000000 | ||
| 3/8" | 1/2" | 1 1/8" | 7 9/16" | Steel | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A113 | 000000 | ||
| 3/8" | 5/8" | 1 3/8" | 7 9/16" | Steel | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A114 | 000000 | ||
Swivel Bump | |||||||||||||||
6 Knurling Wheels | |||||||||||||||
| 1/4" | 5/16" | 3/4" | 6 1/2" | Steel | 5/8" | 5/16" | 7/32" | M4 High-Speed Tool Steel | One left-hand spiral knurl (14 teeth per inch) One left-hand spiral knurl (21 teeth per inch) One left-hand spiral knurl (33 teeth per inch) One right-hand spiral knurl (14 teeth per inch) One right-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (33 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A51 | 000000 | ||
| 1/4" | 3/8" | 7/8" | 6 1/2" | Steel | 5/8" | 5/16" | 7/32" | M4 High-Speed Tool Steel | One left-hand spiral knurl (14 teeth per inch) One left-hand spiral knurl (21 teeth per inch) One left-hand spiral knurl (33 teeth per inch) One right-hand spiral knurl (14 teeth per inch) One right-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (33 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A52 | 000000 | ||
| 3/8" | 1/2" | 1 1/8" | 6 1/2" | Steel | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (14 teeth per inch) One left-hand spiral knurl (21 teeth per inch) One left-hand spiral knurl (33 teeth per inch) One right-hand spiral knurl (14 teeth per inch) One right-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (33 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A53 | 000000 | ||
| 3/8" | 5/8" | 1 3/8" | 7" | Steel | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (14 teeth per inch) One left-hand spiral knurl (21 teeth per inch) One left-hand spiral knurl (33 teeth per inch) One right-hand spiral knurl (14 teeth per inch) One right-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (33 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 3332A54 | 000000 | ||
Economy Indexable Lathe Boring Carbide Insert Holder
 |  |
These tools come with an insert installed. When one edge of the insert dulls, rotate it to use a sharp edge. When all edges dull, replace the insert rather than the whole tool. Inserts are C5 carbide for general purpose machining.
Insert | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. Hole Dia. | Max. Hole Dp. | Overall Lg. | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thk. | Includes | Mfr. | Each | |||
Right-Hand Cutting Direction | |||||||||||||
1/2" Diameter Shank | |||||||||||||
| 7/16" | 1 1/4" | 2 3/4" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A201 | 000000 | ||
| 7/16" | 2 1/8" | 3 5/8" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A202 | 00000 | ||
| 1/2" | 1 1/2" | 3" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A203 | 00000 | ||
| 1/2" | 2 1/2" | 4" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A204 | 00000 | ||
3/4" Diameter Shank | |||||||||||||
| 7/16" | 1 3/8" | 3 3/8" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A205 | 00000 | ||
| 7/16" | 2 1/4" | 4 1/4" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A206 | 00000 | ||
| 1/2" | 1 5/8" | 3 5/8" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A207 | 00000 | ||
| 1/2" | 2 5/8" | 4 5/8" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A208 | 00000 | ||
| 9/16" | 1 7/8" | 3 7/8" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A209 | 00000 | ||
| 9/16" | 3" | 5" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A211 | 00000 | ||
| 11/16" | 2 1/4" | 4 1/4" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A212 | 00000 | ||
| 11/16" | 3 1/2" | 5 1/2" | Steel | Steel | TPMT-221, TPMT-222 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3249A213 | 00000 | ||
| |
Each | Package | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | For Use On | Each | Pkg. Qty. | Pkg. | ||||
Uncoated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A132 | 000000 | 10 | 3240A129 | 0000000 | ||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A131 | 00000 | 10 | 3240A123 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A135 | 00000 | 10 | 3240A252 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A134 | 00000 | 10 | 3240A16 | 000000 | ||
Titanium Nitride (TiN) Coated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A133 | 00000 | 10 | 3240A13 | 000000 | ||
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A136 | 00000 | 10 | 3240A259 | 000000 | ||
Carbide-Tipped Internal Threading Lathe Tools
 |  |  |
Shank | Tip | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. Hole Dia. | Max. Hole Dp. | Offset | Wd. | Ht. | Overall Lg. | Material | Nose Angle | Lg. | Thk. | For Use On | Mfr. | Each | |||
Right-Hand Cutting Direction | |||||||||||||||
| 0.45" | 1/2" | 0.175" | 3/8" | 3/8" | 2 1/2" | Micrograin Carbide | 60° | 5/16" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Clapp & Haney | 1582N71 | 000000 | ||
| 0.45" | 1" | 0.175" | 3/8" | 3/8" | 2 1/2" | Micrograin Carbide | 60° | 5/16" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Clapp & Haney | 1582N72 | 00000 | ||
| 0.575" | 3/4" | 0.2" | 1/2" | 1/2" | 3 1/2" | Micrograin Carbide | 60° | 1/2" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Clapp & Haney | 1582N73 | 00000 | ||
| 0.575" | 1 1/4" | 0.2" | 1/2" | 1/2" | 3 1/2" | Micrograin Carbide | 60° | 1/2" | 3/32" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Clapp & Haney | 1582N74 | 00000 | ||
Boring Lathe Tool Sets
 |  | |
9-Piece Set | 12-Piece Set |
Use these tools to enlarge existing holes to precise diameters. All have an offset taper that provides additional clearance to prevent chips from clogging the hole.
C2 Carbide—C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 Carbide—C6 carbide tips hold up better than C2 carbide when making cuts in steel.
C2 Carbide | C6 Carbide | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | No. of Pieces | Includes | Mfr. | For Use On | Each | For Use On | Each | ||||
Right-Hand Cutting Direction | |||||||||||
| 3/8" | 9 | One 2 15/16" lg. boring tool for 7/16" min. hole dia. and 1 11/16" max. hole dp. One 2 21/32" lg. boring tool for 3/8" min. hole dia. and 1 13/32" max. hole dp. One 2 3/16" lg. boring tool for 3/8" min. hole dia. and 15/16" max. hole dp. One 2 3/4" lg. boring tool for 5/16" min. hole dia. and 1 1/2" max. hole dp. One 2 3/8" lg. boring tool for 5/16" min. hole dia. and 1 1/8" max. hole dp. One 2 3/8" lg. boring tool for 7/16" min. hole dia. and 1 1/8" max. hole dp. One 2" lg. boring tool for 5/16" min. hole dia. and 3/4" max. hole dp. One 3 1/2" lg. boring tool for 7/16" min. hole dia. and 2 1/4" max. hole dp. One 3 1/8" lg. boring tool for 3/8" min. hole dia. and 1 7/8" max. hole dp. | Borite | Aluminum, Brass, Bronze | 3296A72 | 0000000 | Steel | 3296A71 | 0000000 | ||
| 1/2" | 9 | One 2 1/4" lg. boring tool for 5/16" min. hole dia. and 3/4" max. hole dp. One 2 5/8" lg. boring tool for 5/16" min. hole dia. and 1 1/8" max. hole dp. One 2 5/8" lg. boring tool for 7/16" min. hole dia. and 1 1/8" max. hole dp. One 3 3/16" lg. boring tool for 7/16" min. hole dia. and 1 11/16" max. hole dp. One 3 3/4" lg. boring tool for 7/16" min. hole dia. and 2 1/4" max. hole dp. One 3 3/4" lg. boring tool for 9/16" min. hole dia. and 2 1/4" max. hole dp. One 3" lg. boring tool for 5/16" min. hole dia. and 1 1/2" max. hole dp. One 3" lg. boring tool for 9/16" min. hole dia. and 1 1/2" max. hole dp. One 4 1/2" lg. boring tool for 9/16" min. hole dia. and 3" max. hole dp. | Borite | Aluminum, Brass, Bronze | 3296A74 | 000000 | Steel | 3296A73 | 000000 | ||
| 5/8" | 12 | One 2 1/4" lg. boring tool for 5/16" min. hole dia. and 3/4" max. hole dp. One 2 5/8" lg. boring tool for 5/16" min. hole dia. and 1 1/8" max. hole dp. One 2 5/8" lg. boring tool for 7/16" min. hole dia. and 1 1/8" max. hole dp. One 3 3/16" lg. boring tool for 7/16" min. hole dia. and 1 11/16" max. hole dp. One 3 3/4" lg. boring tool for 7/16" min. hole dia. and 2 1/4" max. hole dp. One 3 3/4" lg. boring tool for 9/16" min. hole dia. and 2 1/4" max. hole dp. One 3 3/8" lg. boring tool for 11/16" min. hole dia. and 1 7/8" max. hole dp. One 3" lg. boring tool for 5/16" min. hole dia. and 1 1/2" max. hole dp. One 3" lg. boring tool for 9/16" min. hole dia. and 1 1/2" max. hole dp. One 4 1/2" lg. boring tool for 9/16" min. hole dia. and 3" max. hole dp. One 4 5/16" lg. boring tool for 11/16" min. hole dia. and 2 13/16" max. hole dp. One 5 1/4" lg. boring tool for 11/16" min. hole dia. and 3 3/4" max. hole dp. | Borite | Aluminum, Brass, Bronze | 3296A85 | 000000 | Steel | 3296A95 | 000000 | ||
| 3/4" | 12 | One 3 11/16" lg. boring tool for 7/16" min. hole dia. and 1 11/16" max. hole dp. One 3 1/2" lg. boring tool for 9/16" min. hole dia. and 1 1/2" max. hole dp. One 3 1/8" lg. boring tool for 7/16" min. hole dia. and 1 1/8" max. hole dp. One 3 7/8" lg. boring tool for 11/16" min. hole dia. and 1 7/8" max. hole dp. One 4 13/16" lg. boring tool for 11/16" min. hole dia. and 2 13/16" max. hole dp. One 4 1/4" lg. boring tool for 13/16" min. hole dia. and 2 1/4" max. hole dp. One 4 1/4" lg. boring tool for 7/16" min. hole dia. and 2 1/4" max. hole dp. One 4 1/4" lg. boring tool for 9/16" min. hole dia. and 2 1/4" max. hole dp. One 5 3/4" lg. boring tool for 11/16" min. hole dia. and 3 3/4" max. hole dp. One 5 3/8" lg. boring tool for 13/16" min. hole dia. and 3 3/8" max. hole dp. One 5" lg. boring tool for 9/16" min. hole dia. and 3" max. hole dp. One 6 1/2" lg. boring tool for 13/16" min. hole dia. and 4 1/2" max. hole dp. | Borite | Aluminum, Brass, Bronze | 3296A76 | 000000 | Steel | 3296A75 | 000000 | ||
Long-Reach Boring Lathe Tool Sets
 |  |
Right-Hand Cutting Direction | Left-Hand Cutting Direction |
| |
Right-Hand Cutting Direction | Left-Hand Cutting Direction |
The long steel shank on these tools can reach farther inside the workpiece than standard boring tools and can be cut to length depending on the depth of the hole. Use them to enlarge existing holes to precise diameters.
Tips are micrograin carbide, which outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Right-Hand Cutting Direction—Right-hand tools are for boring when the workpiece is rotating counterclockwise (toward the lathe operator).
Left-Hand Cutting Direction—Left-hand tools are for boring when the workpiece is rotating clockwise (away from the lathe operator).
Right-Hand Cutting Direction | Left-Hand Cutting Direction | |||||||
|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | For Use On | Mfr. | Each | Each | |||
| 5 | One 1/2" dia. shank boring tool for 5/8" min. hole dia. and 6" max. hole dp. One 1/4" dia. shank boring tool for 0.320" min. hole dia. and 3" max. hole dp. One 3/4" dia. shank boring tool for 0.935" min. hole dia. and 8" max. hole dp. One 3/8" dia. shank boring tool for 0.463" min. hole dia. and 5" max. hole dp. One 5/8" dia. shank boring tool for 0.795" min. hole dia. and 7" max. hole dp. | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Micro 100 | 3296A31 | 0000000 | 3296A32 | 0000000 | |
CNC Lathe Knurling Tools
For Knurling
 |  |  |
Right Hand for 1 Knurling Wheel | Right Hand for 2 Knurling Wheels | Left Hand for 1 Knurling Wheel |
Shank | For Knurl | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Overall Lg. | Material | For No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | For Use On | Mfr. | Each | |||
Right-Hand Cutting Direction | |||||||||||||
| 1/2" | 1/2" | 4" | Steel | 2 | 1/2" | 3/16" | 3/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N21 | 0000000 | ||
| 5/8" | 5/8" | 4" | Steel | 2 | 1/2" | 3/16" | 3/16" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N22 | 000000 | ||
| 3/4" | 3/4" | 4" | Steel | 1 | 3/4" | 3/8" | 1/4" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N11 | 000000 | ||
| 1" | 1" | 5" | Steel | 1 | 3/4" | 3/8" | 1/4" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N13 | 000000 | ||
Left-Hand Cutting Direction | |||||||||||||
| 3/4" | 3/4" | 4" | Steel | 1 | 3/4" | 3/8" | 1/4" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N12 | 000000 | ||
| 1" | 1" | 5" | Steel | 1 | 3/4" | 3/8" | 1/4" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N14 | 000000 | ||
For Face Knurling
 |
Right-Hand Cutting Direction |
Shank | For Knurl | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Overall Lg. | Material | For No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | For Use On | Mfr. | Each | |||
Right-Hand Cutting Direction | |||||||||||||
| 3/4" | 3/4" | 5" | Steel | 1 | 3/4" | 3/8" | 1/4" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N31 | 0000000 | ||
| 1" | 1" | 5" | Steel | 1 | 3/4" | 3/8" | 1/4" | Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | Accu Trak | 1617N32 | 000000 | ||
For Internal Knurling
 |
Includes Knurling Wheel |
Use internal knurling tools on the inside of holes and bores to reduce slippage between parts. They also improve adhesive bonding by creating more surface area as compared to a smooth surface.
Knurl | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Overall Lg. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Material | Includes | For Use On | Mfr. | Each | |||
Neutral Cutting Direction | ||||||||||||||
| 1/2" | 6" | Steel | 1 | 5/16" | 5/32" | 1/8" | M4 High-Speed Tool Steel | One Straight-Pattern Knurl (35 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Steel | Eagle Rock Technologies | 1617N111 | 0000000 | ||
| 5/8" | 6" | Steel | 1 | 1/2" | 3/16" | 3/16" | M4 High-Speed Tool Steel | One Straight-Pattern Knurl (25 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Steel | Eagle Rock Technologies | 1617N112 | 000000 | ||
| 3/4" | 6" | Steel | 1 | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One Straight-Pattern Knurl (21 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Steel | Eagle Rock Technologies | 1617N113 | 000000 | ||
| 1" | 6" | Steel | 1 | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One Straight-Pattern Knurl (21 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Steel | Eagle Rock Technologies | 1617N114 | 000000 | ||
Long-Reach Internal Grooving Lathe Tools for Retaining Rings
 |  |  |
Groove Wd. | Min. Hole Dia. | Max. Hole Dp. | Offset | Shank Dia. | Overall Lg. | Material | For Use On | Mfr. | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063" | 5/16" | 3" | 0.06" | 1/4" | 4 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A87 | 000000 | |
| 0.063" | 5/8" | 5" | 0.12" | 1/2" | 6 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A91 | 000000 | |
| 0.094" | 3/8" | 3" | 0.075" | 5/16" | 4 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A88 | 000000 | |
| 0.125" | 3/8" | 3" | 0.075" | 5/16" | 4 1/2" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 32335A89 | 000000 |
Economy Indexable Lathe Threading Tools
 | |
Neutral Cutting Direction | E |
A carbide insert comes installed on these tools. When one point of the insert dulls, rotate it to use a sharp point. When all points dull, replace the insert rather than the whole tool. A neutral cut direction means these tools can cut from either right to left or left to right.
Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.
Tools | Replacement Round Head Screws | Replacement Flat Head Screws | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tool Bit | Shank | Thread | Insert | |||||||||||||||||||
Style | Code | Wd. | Ht. | Overall Lg. | Type | Shape | Angle | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thk. | Includes | Mfr. | Each | Each | Each | |||||
Neutral Cutting Direction | ||||||||||||||||||||||
| E | E-6 | 3/8" | 3/8" | 2 1/2" | UNC, UNF, UNS | V | 60° | Steel | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | Borite | 3240A118 | 000000 | 3240A211 | 00000 | ——— | 0 | ||
| E | E-8 | 1/2" | 1/2" | 3 1/2" | UNC, UNF, UNS | V | 60° | Steel | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A119 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| E | E-10 | 5/8" | 5/8" | 4" | UNC, UNF, UNS | V | 60° | Steel | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A121 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| E | E-12 | 3/4" | 3/4" | 4 1/2" | UNC, UNF, UNS | V | 60° | Steel | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | Borite | 3240A122 | 00000 | 3240A212 | 0000 | ——— | 0 | ||
| E | E-16 | 1" | 1" | 6" | UNC, UNF, UNS | V | 60° | Steel | Steel | TPMT-431 | 1/2" | 3/16" | One TPMT-431 Insert | Borite | 3240A222 | 00000 | ——— | 0 | 3240A334 | 00000 | ||
| |
Each | Package | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | For Use On | Each | Pkg. Qty. | Pkg. | ||||
Uncoated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A132 | 000000 | 10 | 3240A129 | 0000000 | ||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A131 | 00000 | 10 | 3240A123 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Aluminum, Brass, Bronze | 3240A138 | 00000 | 10 | 3240A445 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A137 | 00000 | 10 | 3240A303 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Aluminum, Brass, Bronze | 1691N111 | 00000 | 10 | 1691N121 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N113 | 00000 | 10 | 1691N123 | 000000 | ||
Titanium Nitride (TiN) Coated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A133 | 00000 | 10 | 3240A13 | 000000 | ||
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-8, AL-10, AL-12, AR-8, AR-10, AR-12, BL-8, BL-10, BL-12, BR-8, BR-10, BR-12, E-8, E-10, E-12 | Steel | 3240A139 | 00000 | 10 | 3240A495 | 000000 | ||
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | Steel | 1691N115 | 00000 | 10 | 1691N125 | 000000 | ||
Long-Reach Internal Profiling Lathe Tools
For Internal Profiling
 |  |  |
Shank Dia. | Min. Hole Dia. | Max. Hole Dp. | Offset | Overall Lg. | Tip Radius | For Use On | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand Cutting Direction | |||||||||||
Micrograin Carbide | |||||||||||
| 1/4" | 0.36" | 3 3/8" | 0.1" | 4 3/8" | 0.010" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1668N55 | 000000 | ||
| 5/16" | 0.42" | 3 3/8" | 0.1" | 4 3/8" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1668N56 | 00000 | ||
| 3/8" | 0.48" | 5 3/8" | 0.1" | 6 3/8" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1668N57 | 000000 | ||
| 1/2" | 0.615" | 5 3/8" | 0.11" | 6 3/8" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1668N58 | 000000 | ||
| 5/8" | 3/4" | 5 3/8" | 1/8" | 6 3/8" | 0.020" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | Internal Tool | 1668N59 | 000000 | ||
Economy Indexable Boring Carbide Insert Holder Sets
 |  | |
4-Piece Set | 8-Piece Set |
Insert | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | No. of Pieces | Includes | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thk. | Mfr. | Each | |||
Right-Hand Cutting Direction | ||||||||||||
| 1/2" | 4 | Four TPMT-221 Inserts One 2 3/4" lg. boring tool for 7/16" min. hole dia. and 1 1/4" max. hole dp. One 3 5/8" lg. boring tool for 7/16" min. hole dia. and 2 1/8" max. hole dp. One 3" lg. boring tool for 1/2" min. hole dia. and 1 1/2" max. hole dp. One 4" lg. boring tool for 1/2" min. hole dia. and 2 1/2" max. hole dp. | Steel | Steel | TPMT-221 | 1/4" | 1/8" | Borite | 3249A221 | 0000000 | ||
| 3/4" | 8 | Eight TPMT-221 Inserts One 3 3/8" lg. boring tool for 7/16" min. hole dia. and 1 3/8" max. hole dp. One 3 5/8" lg. boring tool for 1/2" min. hole dia. and 1 5/8" max. hole dp. One 3 7/8" lg. boring tool for 9/16" min. hole dia. and 1 7/8" max. hole dp. One 4 1/4" lg. boring tool for 11/16" min. hole dia. and 2 1/4" max. hole dp. One 4 1/4" lg. boring tool for 7/16" min. hole dia. and 2 1/4" max. hole dp. One 4 5/8" lg. boring tool for 1/2" min. hole dia. and 2 5/8" max. hole dp. One 5 1/2" lg. boring tool for 11/16" min. hole dia. and 3 1/2" max. hole dp. One 5" lg. boring tool for 9/16" min. hole dia. and 3" max. hole dp. | Steel | Steel | TPMT-221 | 1/4" | 1/8" | Borite | 3249A222 | 000000 | ||
| |
Each | Package | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | For Use On | Each | Pkg. Qty. | Pkg. | ||||
Uncoated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Aluminum, Brass, Bronze | 3240A132 | 000000 | 10 | 3240A129 | 0000000 | ||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A131 | 00000 | 10 | 3240A123 | 000000 | ||
Titanium Nitride (TiN) Coated | |||||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | Steel | 3240A133 | 00000 | 10 | 3240A13 | 000000 | ||
Diamond-Tipped External Threading Lathe Tools
For External Threading
 |  |
Tool Bit | Shank | Thread | Tip | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Code | Wd. | Ht. | Type | Shape | Overall Lg. | Nose Angle | Radius | Lg. | Thk. | For Use On | Mfr. | Each | |||
Neutral Cutting Direction | ||||||||||||||||
Diamond | ||||||||||||||||
| E | E-5 | 5/16" | 5/16" | UNC, UNF, UNS | V | 2 1/4" | 60° | 0.010" | 0.1" | 1/4" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A82 | 000000 | ||
| E | E-6 | 3/8" | 3/8" | UNC, UNF, UNS | V | 2 1/2" | 60° | 0.010" | 0.1" | 1/4" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A83 | 00000 | ||
| E | E-8 | 1/2" | 1/2" | UNC, UNF, UNS | V | 3 1/2" | 60° | 0.010" | 0.1" | 1/4" | Aluminum, Carbon, Ceramic, Copper, Fiberglass, Plastic, Rubber | Radiac Abrasives | 3316A85 | 00000 | ||
Scissor-Style Lathe Knurling Tools
 |
Knurl material without straining your lathe. Also known as straddle-type knurling tools, these tools pinch both sides of your workpiece to balance out knurling pressure rather than transfer it to your spindle. Use them on soft materials to form patterns into your workpiece for a better grip. A left- and right-hand spiral knurl comes installed, so you can form a diamond pattern—common for tool handles—in one go. When you need to replace a knurl, switch it out without removing the tool from the machine. These tools can be flipped to be used in either a right-hand or left-hand orientation. Right-hand holders move from right to left toward the lathe chuck; left-hand holders move from left to right away from the lathe chuck.
Teeth per inch (TPI) determines how fine your pattern is. 21 TPI will create a coarse diamond pattern suitable for tool handles around 3/4" in diameter.
Shank | Knurl | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | For Workpiece Size | Overall Lg. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Material | Includes | For Use On | Mfr. | Each | ||
| 1" | 1/2" | 0" to 4" | 7" | Black-Oxide Steel | 2 | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 9352N111 | 0000000 | |
| 1" | 5/8" | 0" to 4" | 7" | Black-Oxide Steel | 2 | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 9352N112 | 000000 | |
| 1" | 3/4" | 0" to 4" | 7" | Black-Oxide Steel | 2 | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 9352N113 | 000000 | |
| 1" | 1" | 0" to 4" | 7" | Black-Oxide Steel | 2 | 3/4" | 3/8" | 1/4" | M4 High-Speed Tool Steel | One left-hand spiral knurl (21 teeth per inch) One right-hand spiral knurl (21 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, Titanium | Eagle Rock Technologies | 9352N114 | 000000 | |
Quick-Change CNC Lathe Knurling Tools and Holders
 |
Cut down on setup time for heavy duty knurling with this system of tools and holders. Each holder accepts multiple tools, so you can install the holder on your lathe once, then swap out the tool to switch tasks. Knurls are included with each tool. They’re made of heat-treated, high-speed tool steel for strength and shock resistance. A titanium nitride coating prevents wear.
Teeth per inch (TPI) determines how fine your pattern is. The higher the number, the smoother, more closely spaced your pattern will be. A tool handle is usually knurled with 30 TPI.
Angled Tool for Cutting
 |
Angled tools position straight-patterned knurls at an angle to create a diamond pattern on the workpiece.
Tools for cutting have knurls with sharp teeth that remove material. They’re used to create deeper, more precise patterns than forming tools, especially on harder materials.
Tools | Replacement Pin Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Workpiece Size | Knurl | ||||||||||||||||||
Min. | Max. | For Shank Wd. | Lg. | Wd. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Face Type | Material | Includes | For Use On | Mfr. | Each | Each | |||
| 1/2" | 1 1/2" | 3/8" to 5/8" | 1 3/8" | 1" | Steel | 2 | 1/2" | 5/32" | 1/4" | Full Face | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Two Straight-Pattern Knurls (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N121 | 0000000 | 9466N131 | 000000 | |
| 1/2" | 1 1/2" | 3/4" to 1 1/4" | 1 15/16" | 2" | Steel | 2 | 1/2" | 5/32" | 1/4" | Full Face | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Two Straight-Pattern Knurls (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N112 | 000000 | 9466N131 | 00000 | |
| 1" | 5" | 3/4" to 1 1/4" | 1 15/16" | 2" | Steel | 2 | 3/4" | 3/16" | 1/4" | Full Face | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Two straight-pattern knurls (25 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N113 | 000000 | 9466N127 | 00000 | |
| 2" | — | 3/4" to 1 1/4" | 2 1/8" | 2" | Steel | 2 | 1" | 1/4" | 5/16" | Full Face | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Two straight-pattern knurls (25 teeth per inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N114 | 000000 | 9466N128 | 00000 | |
 |
Straight with Full Face |
Dia. | Face Wd. | Hole Dia. | Knurl Face Type | Material | For Use On | Teeth per In. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Straight Knurl | ||||||||||
Cutting | ||||||||||
| 1/2" | 1/4" | 1/4" | Full Face | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N101 | 000000 | ||
| 3/4" | 3/16" | 1/4" | Full Face | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 25 | 9462N102 | 00000 | ||
| 1" | 1/4" | 5/16" | Full Face | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 25 | 9462N103 | 00000 | ||
Bump Tool for Forming
 |
Bump tools press against the side of the workpiece to align it with your lathe. They’re good for narrow knurling applications.
Tools for forming have knurls with smooth, rounded teeth that displace material on the surface of your workpiece. They’re best for creating shallow patterns on soft materials.
Tools | Replacement Pin Sets | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Knurl | ||||||||||||||||||
For Min. Workpiece Size | For Shank Wd. | Lg. | Wd. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Face Type | Material | Includes | For Use On | Mfr. | Each | Each | |||
| 0" | 3/4" to 1 1/4" | 1 7/8" | 2" | Steel | 1 | 1" | 3/8" | 5/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Straight-Pattern Knurl (25 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N116 | 0000000 | 9466N129 | 000000 | |
| 3/8" | 3/4" to 1 1/4" | 2 1/8" | 2" | Steel | 2 | 1" | 1/4" | 5/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (25 Teeth per Inch) One Right-Hand Spiral Pattern Knurl (25 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N115 | 000000 | 9466N129 | 00000 | |
 |  |  |
Right-Hand Spiral | Left-Hand Spiral | Straight |
Dia. | Face Wd. | Hole Dia. | Knurl Face Type | Material | For Use On | Teeth per In. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1" | 1/4" | 5/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 25 | 9462N104 | 000000 | ||
Left-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1" | 1/4" | 5/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 25 | 9462N105 | 00000 | ||
Straight Knurl | ||||||||||
Forming | ||||||||||
| 1" | 3/8" | 5/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 25 | 9462N106 | 00000 | ||
Shoulder Bump Tool for Forming
 |
Shoulder tools provide additional clearance to knurl all the way up to the workpiece shoulder.
Tools for forming have knurls with smooth, rounded teeth that displace material on the surface of your workpiece. They’re best for creating shallow patterns on soft materials.
Tools | Replacement Pin Sets | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Knurl | ||||||||||||||||||
For Min. Workpiece Size | For Shank Wd. | Lg. | Wd. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Face Type | Material | Includes | For Use On | Mfr. | Each | Each | |||
| 1/4" | 3/8" to 5/8" | 1 1/4" | 1" | Steel | 2 | 1/2" | 5/32" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) One Right-Hand Spiral Pattern Knurl (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N122 | 0000000 | 9466N131 | 000000 | |
| 3/8" | 3/4" to 1 1/4" | 1 7/8" | 2" | Steel | 2 | 1" | 3/8" | 1/2" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (25 Teeth per Inch) One Right-Hand Spiral Pattern Knurl (25 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N117 | 000000 | 9466N132 | 00000 | |
| |
Right-Hand Spiral | Left-Hand Spiral |
Dia. | Face Wd. | Hole Dia. | Knurl Face Type | Material | For Use On | Teeth per In. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 1/4" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N112 | 000000 | ||
| 1" | 3/8" | 1/2" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 25 | 9462N107 | 00000 | ||
Left-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 1/4" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N113 | 00000 | ||
| 1" | 3/8" | 1/2" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 25 | 9462N108 | 00000 | ||
Straddle Tool for Forming
 |
Straddle tools clamp the workpiece from both sides, so the knurling pressure is absorbed by the tool rather than your lathe spindle.
Tools for forming have knurls with smooth, rounded teeth that displace material on the surface of your workpiece. They’re best for creating shallow patterns on soft materials.
Tools | Replacement Pin Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Workpiece Size | Knurl | ||||||||||||||||||
Min. | Max. | For Shank Wd. | Lg. | Wd. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Face Type | Material | Includes | For Use On | Mfr. | Each | Each | |||
| 0" | 5/8" | 3/8" to 5/8" | 1 13/16" | 2 1/16" | Steel | 2 | 1/2" | 3/16" | 3/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) One Right-Hand Spiral Pattern Knurl (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N123 | 0000000 | 9466N125 | 000000 | |
| 0" | 1" | 3/4" to 1 1/4" | 2 1/2" | 2 7/8" | Steel | 2 | 3/4" | 3/16" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) One Right-Hand Spiral Pattern Knurl (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N118 | 000000 | 9466N126 | 00000 | |
| |
Right-Hand Spiral | Left-Hand Spiral |
Dia. | Face Wd. | Hole Dia. | Knurl Face Type | Material | For Use On | Teeth per In. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 3/16" | 3/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N114 | 000000 | ||
| 3/4" | 3/16" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N109 | 00000 | ||
Left-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 3/16" | 3/16" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N115 | 00000 | ||
| 3/4" | 3/16" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N111 | 00000 | ||
Shoulder Straddle Tool for Forming
 |
Shoulder tools provide additional clearance to knurl all the way up to the workpiece shoulder.
Tools for forming have knurls with smooth, rounded teeth that displace material on the surface of your workpiece. They’re best for creating shallow patterns on soft materials.
Tools | Replacement Pin Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Workpiece Size | Knurl | ||||||||||||||||||
Min. | Max. | For Shank Wd. | Lg. | Wd. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Face Type | Material | Includes | For Use On | Mfr. | Each | Each | |||
| 0" | 5/8" | 3/8" to 5/8" | 1 3/4" | 2 1/16" | Steel | 2 | 1/2" | 5/32" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) One Right-Hand Spiral Pattern Knurl (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N124 | 0000000 | 9466N131 | 000000 | |
| 0" | 1" | 3/4" to 1 1/4" | 2 5/16" | 2 7/8" | Steel | 2 | 1/2" | 5/32" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) One Right-Hand Spiral Pattern Knurl (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9466N119 | 000000 | 9466N131 | 00000 | |
| |
Right-Hand Spiral | Left-Hand Spiral |
Dia. | Face Wd. | Hole Dia. | Knurl Face Type | Material | For Use On | Teeth per In. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 1/4" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N112 | 000000 | ||
Left-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 1/4" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N113 | 00000 | ||
Knurling Tool Holders
 |
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Overall Lg. | Material | Includes | Mfr. | Each | ||
| 3/8" | 3/4" | 2 5/8" | Steel | Adjustment Screw Lock Screw | Dorian Tool | 9466N106 | 0000000 | |
| 1/2" | 3/4" | 3" | Steel | Adjustment Screw Lock Screw | Dorian Tool | 9466N107 | 000000 | |
| 5/8" | 3/4" | 3" | Steel | Adjustment Screw Lock Screw | Dorian Tool | 9466N108 | 000000 | |
| 3/4" | 1" | 4 7/8" | Steel | Adjustment Screw Three Lock Screws | Dorian Tool | 9466N101 | 000000 | |
| 1" | 1" | 4 7/8" | Steel | Adjustment Screw Three Lock Screws | Dorian Tool | 9466N102 | 000000 | |
| 1 1/4" | 1" | 5 3/8" | Steel | Adjustment Screw Three Lock Screws | Dorian Tool | 9466N103 | 000000 | |
Three-Wheel Lathe Knurling Tools and Holders
 |  |  |
Round Shank | Square Shank | Forming |
Tools | Replacement Pin Sets | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Knurl | ||||||||||||||||||
For Workpiece Size | Dia. | Lg. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Face Type | Material | Includes | For Use On | Mfr. | Each | Each | ||||
Forming | ||||||||||||||||||
| 1/8" to 1/4" | 1 3/4" | 1 1/2" | Steel | 3 | 1/2" | 1/4" | 1/4" | Beveled | High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) Two Right-Hand Spiral Pattern Knurls (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9470N101 | 000000000 | 9466N131 | 000000 | ||
| 1/8" to 1" | 3" | 1 1/2" | Steel | 3 | 1/2" | 1/4" | 1/4" | Beveled | High-Speed Tool Steel | One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) Two Right-Hand Spiral Pattern Knurls (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | Dorian Tool | 9470N102 | 00000000 | 9466N131 | 00000 | ||
Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Tool Dia. | Dia. | Wd. | Ht. | Through-Hole Dia. | Overall Lg. | Material | Each | |||
Square Shank | ||||||||||
 | ||||||||||
| 1 3/4" | — | 1/2" | 1/2" | — | 3" | Steel | 9470N103 | 0000000 | ||
| 1 3/4" | — | 5/8" | 5/8" | — | 3 1/2" | Steel | 9470N104 | 000000 | ||
| 1 3/4" | — | 3/4" | 3/4" | — | 4" | Steel | 9470N105 | 000000 | ||
| 3" | — | 3/4" | 3/4" | — | 4" | Steel | 9470N109 | 000000 | ||
| 3" | — | 1" | 1" | — | 5" | Steel | 9470N111 | 000000 | ||
Round Shank | ||||||||||
 | ||||||||||
| 1 3/4" | 1/2" | — | — | 1/4" | 3" | Steel | 9470N107 | 000000 | ||
| 1 3/4" | 5/8" | — | — | 1/4" | 3 1/2" | Steel | 9470N106 | 000000 | ||
| 1 3/4" | 3/4" | — | — | 1/4" | 4" | Steel | 9470N108 | 000000 | ||
| 3" | 3/4" | — | — | 1/2" | 4" | Steel | 9470N113 | 000000 | ||
| 3" | 1" | — | — | 3/4" | 5" | Steel | 9470N112 | 000000 | ||
 |  |
Right-Hand Spiral | Left-Hand Spiral |
Teeth per Inch—Teeth per inch (TPI) determines how fine your pattern is. The higher the number, the smoother, more closely spaced your pattern will be. A tool handle is usually knurled with 30 TPI.
Dia. | Face Wd. | Hole Dia. | Knurl Face Type | Material | For Use On | Teeth per In. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Right-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 1/4" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N112 | 000000 | ||
Left-Hand-Spiral Knurl | ||||||||||
Forming | ||||||||||
| 1/2" | 1/4" | 1/4" | Beveled | Titanium Nitride (TiN)-Coated High-Speed Tool Steel | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 9462N113 | 00000 | ||
