3670N56 | Low-Profile DIN-Rail-Mount Power Supply

Mount these power supplies onto DIN rails inside electrical panels and enclosures—they convert AC to DC voltage to power electronic equipment. With a set of standard features, they're a cost-effective option for clean, controlled environments with a stable supply of electricity. Use them to power testing and measuring devices as well as commercial equipment, such as printers and ATMs. Unlike heavy duty power supplies, they're not made for tough, dirty environments.

If you exceed the maximum voltage, current, or load, these power supplies shut down to protect both the power supply and the connected equipment. Some also meet the voltage requirements for use in an SELV (separated extra low voltage) circuit.

With various domestic and international certifications, such as UL listing, CE marking, and TUV certification, these power supplies meet stringent safety standards. Power supplies with an NEC Class 2 or LPS output limit the risk of electrical shock should something fail inside the power supply. Power supplies with an IP20 rating prevent your fingers from touching internal components and accidentally shocking yourself.

Output Voltage Signal—Power supplies with an output voltage signal send a signal that indicates the status of their output voltage, so you know if your power supply isn't working correctly. Configure them to light up a panel or activate an alarm when voltage drops, or connect them to a PLC for remote system monitoring.

Maximum Output Noise Peak-to-Peak—Maximum output noise is also known as ripple noise. The lower the value, the less interference the power supply creates. For most applications, a value over 100mVpp isn’t a problem. However, when using to power extremely sensitive electronics, such as audio equipment and high-precision measuring and testing equipment, you’ll want an output noise around 5mVpp or less.

Power Factor @ Voltage—Power factor shows how effectively a power supply draws AC power from the main electrical supply. The higher the power factor—up to a maximum score of 1—the lower your operating cost.

Efficiency @ Voltage—Efficiency describes how good a power supply is at converting the AC power it draws from your main electrical supply into DC power. High-efficiency power supplies cost less money to operate and produce less heat, meaning cooler temperatures in your electrical cabinet.

Cannot Be Sold To—Power supplies that cannot be sold to the regions listed do not meet local energy efficiency requirements.

	Output
	Voltage, V DC	Voltage Adjustment Range, V DC	Current, amp	Max. Noise Peak-to-Peak, mV DC	Power Factor @ Voltage	Efficiency @ Voltage	For Extra-Low Voltage Circuit Type	Low-Voltage Output Protection	Enclosure Rating	Certification	Specs. Met	Cannot Be Sold To		Each
Single-Phase Input—85-260V AC Input Voltage







				Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal

				12	10.8 to 13.2	1.7	120	Not Rated	80% @ 230V AC	—	NEC Class 2	IP20	UL Listed C-UL Listed CE Marked UL Recognized Component	UL 508	—	3718N203	000000


				12	12 to 15	7.5	180	0.97 @ 115V AC 0.94 @ 230V AC	87% @ 230V AC	—	LPS, NEC Class 2	IP20	UL Listed C-UL Listed CE Marked	UL 508	—	3718N206	00000


				Single-Phase Input—85-264V AC Input Voltage







								Screw-Clamp Terminal Input and Output Connection

								12	12 to 13.2	10	50	0.98 @ 115V AC 0.9 @ 230V AC	90% @ 120V AC 91% @ 230V AC	SELV	—	—	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N331	000000


								Single-Phase Input—90-264V AC Input Voltage







												Spring-Clamp-Terminal Input and Screw-Clamp Terminal Output Connection—With Output Voltage Signal

												12	10.8 to 16.2	5	120	Not Rated	86% @ 230V AC	—	LPS, NEC Class 2	IP20	UL Listed C-UL Listed CE Marked UL Recognized Component	UL 508	—	3718N602	00000


												Single-Phase Input—100-240V AC Input Voltage







																Screw-Clamp Terminal Input and Output Connection

																5	5 to 5.5	3	75	0.5 @ 115V AC 0.4 @ 230V AC	79% @ 115V AC 79% @ 230V AC	SELV	NEC Class 2	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N114	00000


																5	5 to 5.5	6	75	0.48 @ 115V AC 0.38 @ 230V AC	80% @ 115V AC 80% @ 230V AC	SELV	—	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N115	00000
																24	24 to 28	1.25	75	0.5 @ 115V AC 0.4 @ 230V AC	86% @ 115V AC 85% @ 130V AC	SELV	NEC Class 2	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N116	00000
																24	24 to 28	2.1	75	0.5 @ 115V AC 0.4 @ 230V AC	86% @ 115V AC 85% @ 130V AC	SELV	NEC Class 2	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N117	00000
																24	24 to 28	4	75	0.9 @ 115V AC 0.9 @ 230V AC	89% @ 115V AC 87% @ 230V AC	SELV	—	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N118	000000
																48	43.2 to 52.8	5	180	0.98 @ 115V AC 0.9 @ 230V AC	88% @ 115V AC 90% @ 230V AC	SELV	—	—	UL Listed C-UL Listed C-UL Recognized Component CE Marked D Marked UL Recognized Component	UL 508	California, Vermont	3718N113	00000




																		Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal

5	5 to 6																	2	80	Not Rated	77% @ 230V AC	—	LPS, NEC Class 2	IP20	UL Listed C-UL Listed CE Marked	UL 508	—	3718N442	00000


5	5 to 6																	10	80	Not Rated	78% @ 230V AC	—	LPS, NEC Class 2	IP20	UL Listed C-UL Listed CE Marked	UL 508	—	3718N152	00000
12	10.8 to 16.2	3.3																120	Not Rated	86% @ 230V AC	—	LPS, NEC Class 2	IP20	UL Listed C-UL Listed CE Marked TUV Rheinland Certified UL Recognized Component	UL 508	—	3718N631	00000
15	13.5 to 16.5	1.3	120															Not Rated	81% @ 230V AC	—	LPS, NEC Class 2	IP20	UL Listed C-UL Listed CE Marked TUV Rheinland Certified UL Recognized Component	UL 508	—	3718N956	00000
24	22 to 28	5	100															0.55 @ 115V AC 0.45 @ 230V AC	85% @ 115V AC 88% @ 230V AC	SELV	—	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	SEMI F47	—	3718N119	000000
24	22 to 28	10	100															0.95 @ 115V AC 0.95 @ 230V AC	85% @ 115V AC 88% @ 230V AC	SELV	—	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	SEMI F47	—	3718N121	000000
24	22 to 28	20	100															0.95 @ 115V AC 0.95 @ 230V AC	85% @ 115V AC 88% @ 230V AC	SELV	—	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	SEMI F47	—	3718N122	000000
48	39.1 to 49.2	1.25	200															Not Rated	88% @ 230V AC	—	LPS, NEC Class 2	IP20	UL Listed C-UL Listed CE Marked TUV Rheinland Certified UL Recognized Component	UL 508	—	3718N546	00000
48	44 to 56	2.5	120															0.55 @ 115V AC 0.45 @ 230V AC	85% @ 115V AC 88% @ 230V AC	SELV	—	IP20	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	SEMI F47	—	3718N123	000000


Three-Phase Input—350-550V AC Input Voltage







				Screw-Clamp Terminal Input and Output Connection

				12	11.4 to 15	10	10											0.5 @ 480V AC	89.4% @ 400V AC 89.1% @ 500V AC	SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N332	000000


				24	22.5 to 29	5	10											0.5 @ 480V AC	91.3% @ 400V AC 91.2% @ 500V AC	SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N333	000000
				24	22.5 to 29	10	10											0.6 @ 480V AC	93.1% @ 400V AC 93.2% @ 500V AC	SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N334	000000
				24	22.5 to 29	20	30											0.92 @ 480V AC	95.1% @ 400V AC 94.9% @ 500V AC	SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N335	000000
				24	22.5 to 29	40	50											0.94 @ 480V AC	95.2% @ 400V AC 95.1% @ 500V AC	SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N336	000000
				48	45 to 56	5	20	0.6 @ 480V AC										93.8% @ 400V AC 94% @ 500V AC	SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N337	000000
				48	45 to 56	10	40	0.92 @ 480V AC	95.3% @ 400V AC 95.1% @ 500V AC									SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N338	000000
				48	45 to 56	20	40	0.94 @ 480V AC	95.9% @ 400V AC 95.8% @ 500V AC									SELV	—	IP20	C-UL Recognized Component CE Marked UL Recognized Component	—	—	3718N339	000000

Power Supplies


	Single-Phase Input, Screw-Terminal Input and Output Connection

Single-Phase Input, Screw-Terminal Input and Quick-Disconnect-Terminal Output Connection

To power electronics ranging from simple prototypes to complex industrial automation and process control equipment, these general purpose power supplies convert AC to DC voltage. Mount them to a surface inside your device’s enclosure.

So you don’t accidentally touch internal components and shock yourself, these power supplies have their own housing. If you occasionally need to poke around inside your device’s enclosure, the housing also protects the power supplies themselves from damage. But compared to open-frame power supplies, these have a larger footprint, so they won’t fit in tight spaces.

For output wire connections, choose between standard screw terminals and quick-disconnect terminals. Use quick-disconnect terminals if you have wires with ring terminal ends. To connect them, slide a screw through the hole in the quick-disconnect terminal, slip the ring terminal from your wire over the screw, and tighten a nut on the end of the screw to hold everything in place. Screws, nuts, and ring terminals are not included.

If you exceed the maximum current, load, or voltage, these power supplies shut down to protect both the power supply and the connected equipment. Some also protect against excessive temperatures. All meet stringent safety standards.

Cannot Be Sold To—Power supplies that cannot be sold to the regions listed are restricted by local energy efficiency requirements.

	Output															Mounting
	No. of Power Connections	Voltage	Voltage Adjustment Range, V DC	Current	Power	Max. Noise Peak-to-Peak	Power Factor @ Voltage	Efficiency @ Voltage	Ht.	Wd.	Dp.	Certification	Specs. Met	Electrical Protection Type	Cannot Be Sold To	Fasteners Included	Number of Holes		Each
Single-Phase Input—100V AC to 240V AC Input Voltage







				Screw-Terminal Input and Output Connection

				1	3.3V DC	2.85 to 3.6	6 amp	19.8 W	80 mV DC	Not Rated	75% @ 230V AC	1.1"	2"	3.1"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K159	000000


				1	3.3V DC	3 to 3.6	10 amp	33 W	80 mV DC	Not Rated	75% @ 230V AC	1.4"	3.8"	3.9"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K161	00000
				1	5V DC	4.5 to 5.5	3 amp	15 W	120 mV DC	Not Rated	72.5% @ 100V AC 73.5% @ 115V AC 75.5% @ 230V AC	1.5"	3.2"	2.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K114	00000
				1	5V DC	4.5 to 5.5	6 amp	30 W	120 mV DC	Not Rated	73% @ 100V AC 74% @ 115V AC 77% @ 230V AC	1.5"	3.2"	3.5"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K118	00000
				1	5V DC	4.5 to 5.5	8 amp	40 W	120 mV DC	0.97 @ 100V AC 0.97 @ 115V AC 0.85 @ 230V AC	74.5% @ 100V AC 75% @ 115V AC 76.5% @ 230V AC	1.5"	3.2"	3.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K123	00000
				1	12V DC	10.8 to 13.2	1.3 amp	15.6 W	150 mV DC	Not Rated	75.5% @ 100V AC 77% @ 115V AC 78.5% @ 230V AC	1.5"	3.2"	2.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California	No	4	7010K111	00000
				1	12V DC	10.8 to 13.2	2.5 amp	30 W	150 mV DC	Not Rated	80% @ 100V AC 80.5% @ 115V AC 81% @ 230V AC	1.5"	3.2"	3.5"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K115	00000
				1	12V DC	10.8 to 13.2	4.3 amp	51.6 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.87 @ 230V AC	80% @ 100V AC 80.5% @ 115V AC 82% @ 230V AC	1.5"	3.2"	3.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K119	00000
				1	12V DC	10.8 to 13.2	8.4 amp	100.8 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.9 @ 230V AC	82% @ 100V AC 82% @ 115V AC 85% @ 130V AC	1.6"	3.8"	4.3"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K126	00000
				1	12V DC	10.8 to 13.2	12.5 amp	150 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.93 @ 230V AC	84% @ 100V AC 84% @ 115V AC 87% @ 230V AC	1.6"	3.8"	5.1"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K127	00000
				1	15V DC	13.5 to 16.5	1 amp	15 W	150 mV DC	Not Rated	77% @ 100V AC 78.5% @ 115V AC 79.5% @ 230V AC	1.5"	3.2"	2.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K112	00000


				1	15V DC	13.5 to 16.5	2 amp	30 W	150 mV DC	Not Rated	81% @ 100V AC 81.5% @ 115V AC 82% @ 230V AC	1.5"	3.2"	3.5"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K116	00000
				1	15V DC	13.5 to 16.5	3.5 amp	52.5 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.87 @ 230V AC	80% @ 100V AC 80.5% @ 115V AC 82% @ 230V AC	1.5"	3.2"	3.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K121	00000
				1	15V DC	13.5 to 16.5	6.7 amp	100.5 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.9 @ 230V AC	83% @ 100V AC 83% @ 115V AC 86% @ 230V AC	1.6"	3.8"	4.3"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K133	00000
				1	15V DC	13.5 to 16.5	10 amp	150 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.93 @ 230V AC	84% @ 100V AC 84% @ 115V AC 87% @ 230V AC	1.6"	3.8"	5.1"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K134	00000
				1	24V DC	21.6 to 26.4	0.7 amp	16.8 W	150 mV DC	Not Rated	78% @ 100V AC 79% @ 115V AC 80% @ 230V AC	1.5"	3.2"	2.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K113	00000
				1	24V DC	21.6 to 26.4	1.3 amp	31.2 W	150 mV DC	Not Rated	82.5% @ 100V AC 83% @ 115V AC 83.5% @ 230V AC	1.5"	3.2"	3.5"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K117	00000
				1	24V DC	21.6 to 26.4	2.2 amp	52.8 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.87 @ 230V AC	81.5% @ 100V AC 82% @ 115V AC 84% @ 230V AC	1.5"	3.2"	3.9"	C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K122	00000
				1	24V DC	21.6 to 26.4	4.3 amp	103.2 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.9 @ 230V AC	85% @ 100V AC 85% @ 115V AC 88% @ 230V AC	1.6"	3.8"	4.3"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K139	00000
				1	24V DC	21.6 to 26.4	6.4 amp	153.6 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.93 @ 230V AC	87% @ 100V AC 87% @ 115V AC 90% @ 230V AC	1.6"	3.8"	5.1"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K141	00000
				1	36V DC	32 to 40	0.75 amp	27 W	150 mV DC	Not Rated	84% @ 230V AC	1.1"	2"	3.1"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K168	00000


				1	36V DC	32 to 40	1.4 amp	50.4 W	150 mV DC	Not Rated	86% @ 230V AC	1.4"	3.8"	3.9"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K169	00000
				1	36V DC	32.4 to 39.6	2.8 amp	100.8 W	200 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.9 @ 230V AC	86% @ 100V AC 86% @ 115V AC 89% @ 230V AC	1.6"	3.8"	4.3"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K146	00000
				1	36V DC	32.4 to 39.6	4.2 amp	151.2 W	200 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.93 @ 230V AC	87% @ 100V AC 87% @ 115V AC 90% @ 230V AC	1.6"	3.8"	5.1"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K147	00000
				1	48V DC	42 to 54	0.57 amp	27.36 W	200 mV DC	Not Rated	85% @ 130V AC	1.1"	2"	3.1"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K171	00000
				1	48V DC	42 to 54	1.1 amp	52.8 W	200 mV DC	Not Rated	86% @ 230V AC	1.4"	3.8"	3.9"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	4	7010K172	00000
				1	48V DC	43.2 to 52.8	2.1 amp	100.8 W	200 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.9 @ 230V AC	86% @ 100V AC 86% @ 115V AC 89% @ 230V AC	1.6"	3.8"	4.3"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K153	00000
				1	48V DC	43.2 to 52.8	3.2 amp	153.6 W	200 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.93 @ 230V AC	87% @ 100V AC 87% @ 115V AC 90% @ 230V AC	1.6"	3.8"	5.1"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K154	00000
				2	3.3V DC	3 to 3.6	20 amp	66 W	80 mV DC	Not Rated	75% @ 230V AC	1.5"	3.8"	6.3"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K162	00000
				2	3.3V DC	3 to 3.6	30 amp	99 W	80 mV DC	Not Rated	75% @ 230V AC	1.5"	3.9"	7.8"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	7	7010K163	00000
				2	3.3V DC	3 to 3.6	40 amp	132 W	80 mV DC	Not Rated	67% @ 115V AC 68% @ 230V AC	1.6"	3.9"	7.8"	C-UL Recognized Component CE Marked UL Recognized Component	—	Over Temperature, Overcurrent, Overload, Overvoltage	California, Vermont	No	10	7010K164	000000


				2	5V DC	4.5 to 5.5	50 amp	250 W	120 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	73% @ 100V AC 74% @ 115V AC 77% @ 230V AC	1.6"	4"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K124	000000
				2	5V DC	4.5 to 5.5	100 amp	500 W	120 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	76% @ 100V AC 77% @ 115V AC 79% @ 230V AC	2.4"	4.7"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K125	000000
				2	5V DC	4.75 to 5.5	16 amp	80 W	80 mV DC	Not Rated	79% @ 230V AC	1.5"	3.8"	6.3"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	5	7010K165	00000
				2	5V DC	4.75 to 5.5	26 amp	130 W	80 mV DC	Not Rated	79% @ 230V AC	1.5"	3.9"	7.8"	C-UL Recognized Component CE Marked UL Recognized Component	—	Overcurrent, Overload, Overvoltage	California, Vermont	No	7	7010K166	00000
				2	7.5V DC	6.8 to 8.2	26.7 amp	200.25 W	80 mV DC	Not Rated	74% @ 115V AC 77% @ 230V AC	1.6"	3.9"	7.8"	C-UL Recognized Component CE Marked UL Recognized Component	—	Over Temperature, Overcurrent, Overload, Overvoltage	California, Vermont	No	10	7010K167	000000
				2	12V DC	10.8 to 13.2	25 amp	300 W	150 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	79% @ 100V AC 80% @ 115V AC 82% @ 230V AC	1.6"	4"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K128	000000
				2	12V DC	10.8 to 13.2	50 amp	600 W	150 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	81% @ 100V AC 82% @ 115V AC 84% @ 230V AC	2.4"	4.7"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K129	000000
				2	15V DC	13.5 to 16.5	20 amp	300 W	150 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	81% @ 100V AC 82% @ 115V AC 84% @ 230V AC	1.6"	4"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K135	000000
				2	15V DC	13.5 to 16.5	40 amp	600 W	150 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	82% @ 100V AC 82% @ 115V AC 85% @ 130V AC	2.4"	4.7"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K136	000000
				2	24V DC	21.6 to 26.4	12.5 amp	300 W	150 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	82% @ 100V AC 83% @ 115V AC 86% @ 230V AC	1.6"	4"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K142	000000


				2	24V DC	21.6 to 26.4	25 amp	600 W	150 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	84% @ 100V AC 85% @ 115V AC 88% @ 230V AC	2.4"	4.7"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K143	000000
				2	36V DC	32.4 to 39.6	8.4 amp	302.4 W	200 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	83% @ 100V AC 83% @ 115V AC 87% @ 230V AC	1.6"	4"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K148	000000
				2	36V DC	32.4 to 39.6	16.7 amp	601.2 W	200 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	85% @ 100V AC 86% @ 115V AC 88% @ 230V AC	2.4"	4.7"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K149	000000
				2	48V DC	43.2 to 52.8	6.3 amp	302.4 W	200 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	82% @ 100V AC 83% @ 115V AC 86% @ 230V AC	1.6"	4"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K155	000000
2				48V DC	43.2 to 52.8	12.5 amp	600 W	200 mV DC	0.99 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	85% @ 100V AC 85% @ 115V AC 88% @ 230V AC	2.4"	4.7"	7.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	8	7010K156	000000




		Screw-Terminal Input and Quick-Disconnect-Terminal Output Connection

		1	12V DC	10.8 to 13.2	84 amp	1,008 W	210 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	81% @ 100V AC 82% @ 115V AC 85% @ 130V AC	2.4"	5.9"	9.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K131	000000


		1	12V DC	10.8 to 13.2	125 amp	1,500 W	210 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	81% @ 100V AC 82% @ 115V AC 85% @ 130V AC	2.4"	7"	10.6"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K132	000000
		1	15V DC	13.5 to 16.5	67 amp	1,005 W	210 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	82% @ 100V AC 82% @ 115V AC 85% @ 130V AC	2.4"	5.9"	9.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K137	000000
		1	15V DC	13.5 to 16.5	100 amp	1,500 W	210 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	82% @ 100V AC 82% @ 115V AC 85% @ 130V AC	2.4"	7"	10.6"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K138	000000
		1	24V DC	21.6 to 26.4	42 amp	1,008 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	84% @ 100V AC 85% @ 115V AC 88% @ 230V AC	2.4"	5.9"	9.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K144	000000
		1	24V DC	21.6 to 26.4	64 amp	1,536 W	150 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	84% @ 100V AC 85% @ 115V AC 88% @ 230V AC	2.4"	7"	10.6"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K145	000000
		1	36V DC	32.4 to 39.6	28 amp	1,008 W	200 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	84% @ 100V AC 85% @ 115V AC 88% @ 230V AC	2.4"	5.9"	9.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K151	000000
		1	36V DC	32.4 to 39.6	42 amp	1,512 W	200 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	84% @ 100V AC 85% @ 115V AC 88% @ 230V AC	2.4"	7"	10.6"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K152	000000
		1	48V DC	43.2 to 52.8	21 amp	1,008 W	300 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	84% @ 100V AC 85% @ 115V AC 88% @ 230V AC	2.4"	5.9"	9.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K157	000000
		1	48V DC	43.2 to 52.8	32 amp	1,536 W	300 mV DC	0.98 @ 100V AC 0.98 @ 115V AC 0.95 @ 230V AC	84% @ 100V AC 84% @ 115V AC 87% @ 230V AC	2.4"	7"	10.6"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	SEMI F47	Overcurrent, Overload, Overvoltage	—	No	12	7010K158	000000

Heavy Duty DIN-Rail-Mount Power Supplies

Single-Phase Input, Screw-Clamp

Terminal Input and Output Connection

Single-Phase Input,

Spring-Clamp-Terminal Input and

Output Connection

Single-Phase Input,

Spring-Clamp-Terminal Input and

Output Connection—With Output

Voltage Signal

Three-Phase Input, Screw-Clamp

Terminal Input and Output Connection

For critical systems, demanding environments, and any application where downtime is not an option, these reliable power supplies convert AC to DC voltage to keep power flowing. They mount onto DIN rails, which are usually found inside electrical panels and cabinets. Made with the highest-quality internal components, they're designed to last in marine, heavy industrial, and other tough environments. Power supplies with spring-clamp terminals connect quicker and hold firmer than screw-style terminals.

These power supplies maintain a stable output, even in facilities with electrical noise, voltage fluctuation, or poor power quality. Compared to standard power supplies, they require less start-up current, which further improves stability. All use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. Some are also SEMI F47 compliant, meaning they meet standards for maintaining output voltage when input voltage dips. This is commonly known as voltage sag immunity.

For many of these power supplies, exceeding the maximum voltage, temperature, or load will cause the power supply to shut down to protect both the power supply and the connected equipment. Some power supplies meet the voltage requirements for use in a PELV (protected extra low voltage) circuit; some also meet the requirements for use in SELV (separated extra low voltage) circuits.

Rated IP20, these power supplies prevent your fingers from touching internal components and accidentally shocking yourself. With various domestic and international certifications, such as UL listing, CE marking, and TUV Rheinland certification, these power supplies meet stringent safety standards. Some meet additional standards for marine vessels classed by DNV-GL and Lloyd's Register.

Power supplies with an NEC Class 2 output limit the risk of electrical shock should something fail inside the power supply.

Output Peak Current—Power supplies with an output peak current briefly boost power above their maximum operating current for starting motors, actuating solenoid valves, and other applications that require a higher starting current than their operating current. All of this means you get a more powerful power supply in a compact size.

	Output
	Voltage, V DC	Voltage Adjustment Range, V DC	Current, amp	Peak Current, amp	Max. Noise Peak-to-Peak, mV DC	Power Factor @ Voltage	Efficiency @ Voltage	For Extra-Low Voltage Circuit Type	Low-Voltage Output Protection	Enclosure Rating		Each
Single-Phase Input—100-240V AC Input Voltage







				Screw-Clamp Terminal Input and Output Connection

				5	4.5 to 5.75	3	3.6	60	0.42 @ 230V AC	77% @ 230V AC	PELV	NEC Class 2	IP20	7009K31	000000


				5	4.5 to 5.75	5	6	30	0.43 @ 230V AC	79% @ 230V AC	PELV	NEC Class 2	IP20	3719N105	000000
				12	10.8 to 13.8	1.2	1.44	50	0.42 @ 230V AC	77% @ 230V AC	PELV	NEC Class 2	IP20	7009K32	00000
				12	10.8 to 13.8	2.5	3	30	0.42 @ 230V AC	82% @ 230V AC	PELV	NEC Class 2	IP20	7009K33	00000
				12	10.8 to 13.8	4.5	5.4	150	0.46 @ 230V AC	85% @ 130V AC	PELV	NEC Class 2	IP20	3719N108	000000
				24	21.6 to 27.6	0.65	0.78	30	0.42 @ 230V AC	80% @ 230V AC	PELV	NEC Class 2	IP20	7009K34	00000
				24	21.6 to 27.6	1.3	1.56	30	0.42 @ 230V AC	86% @ 230V AC	PELV	NEC Class 2	IP20	7009K35	00000
				24	21.6 to 27.6	2.5	3	50	0.45 @ 230V AC	88% @ 230V AC	PELV	NEC Class 2	IP20	7009K36	00000
				24	21.6 to 27.6	5	6	150	0.94 @ 230V AC	89% @ 230V AC	PELV	NEC Class 2	IP20	7009K81	000000
				24	21.6 to 27.6	10	12	180	0.9 @ 230V AC	92% @ 230V AC	PELV	NEC Class 2	IP20	7009K82	000000
				24	21.6 to 27.6	20	24	230	0.97 @ 230V AC	93% @ 230V AC	PELV	NEC Class 2	IP20	3719N114	000000


				48	43.2 to 55.2	5	6	350	0.9 @ 230V AC	92% @ 230V AC	PELV	NEC Class 2	IP20	3719N113	000000
				48	43.2 to 55.2	10	12	470	0.97 @ 230V AC	93% @ 230V AC	PELV	NEC Class 2	IP20	3719N115	000000




						Spring-Clamp-Terminal Input and Output Connection

						24	21.6 to 28	1.3	1.56	190	Not Rated	87% @ 115V AC 86% @ 230V AC	PELV	NEC Class 2	IP20	3719N21	000000


						24	21.6 to 28	2.5	3	190	Not Rated	87% @ 115V AC 89% @ 230V AC	PELV	NEC Class 2	IP20	3719N22	000000
						24	21.6 to 28	5	6	110	0.9 @ 230V AC	90% @ 115V AC 92% @ 230V AC	PELV	NEC Class 2	IP20	3719N23	000000




								Spring-Clamp-Terminal Input and Output Connection—With Output Voltage Signal

								24	21.6 to 28	10	15	100	0.9 @ 230V AC	91% @ 115V AC 93% @ 230V AC	PELV	NEC Class 2	IP20	3719N24	000000


								24	21.6 to 28	20	30	130	0.9 @ 230V AC	91% @ 115V AC 93% @ 230V AC	PELV	NEC Class 2	IP20	3719N25	000000


								Three-Phase Input—380-480V AC Input Voltage







												Screw-Clamp Terminal Input and Output Connection

												24	22.5 to 29.5	5	6	160	Not Rated	89% @ 400V AC	PELV, SELV	—	IP20	3719N116	000000


												24	22.5 to 29.5	10	12	190	Not Rated	89% @ 400V AC	PELV, SELV	—	IP20	3719N117	000000
												24	22.5 to 29.5	20	24	130	Not Rated	91% @ 400V AC	PELV, SELV	—	IP20	7009K55	000000
24												22.5 to 29.5	40	48	90	Not Rated	92% @ 400V AC	PELV, SELV	—	IP20	3719N119	000000

Ultra-Low-Noise Bench-Mount Power Supplies

Change AC voltage to DC voltage to power extremely sensitive audio, measuring, and testing devices while keeping electronic interference—often called output or ripple noise—from passing on to the device. The lower the output noise value, the less interference the power supplies will create. Although they create less noise than other power supplies, these power supplies are larger, heavier, and give off more heat.

View the output on a digital or analog display.

If you exceed the maximum load or current, all of these power supplies will shut down to protect both the power supply and the connected device.

With 1 Output Power Connection—Digital Display

Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

Over Temperature—Those with overvoltage or over temperature protection will shut down if you exceed the maximum voltage or temperature.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single-Phase Input—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 18V DC	0 amp to 5 amp	0 W to 90 W	4 mV DC	Front	Constant Current, Constant Voltage	5.5"	6.5"	10.4"	Over Temperature, Overcurrent, Overload	7686K25	0000000


		Standard Banana Socket	0V DC to 30V DC	0 amp to 3 amp	0 W to 90 W	4 mV DC	Front	Constant Current, Constant Voltage	5.5"	6.5"	10.4"	Over Temperature, Overcurrent, Overload	7686K24	000000
		Standard Banana Socket	0V DC to 30V DC	0 amp to 6 amp	0 W to 180 W	5 mV DC	Front	Constant Current, Constant Voltage	5.5"	6.5"	10.4"	Over Temperature, Overcurrent, Overload	7686K27	000000
		Standard Banana Socket	1V DC to 18V DC	0 amp to 3 amp	0 W to 54 W	2 mV DC	Front	Constant Current, Constant Voltage	4.3"	9.4"	6"	Overcurrent, Overload	5773N12	000000
		Standard Banana Socket	1V DC to 30V DC	0 amp to 1 amp	0 W to 30 W	2 mV DC	Front	Constant Current, Constant Voltage	4.3"	9.4"	6"	Overcurrent, Overload	5773N11	000000

With 1 Output Power Connection—Analog Display

Analog displays are better than digital displays for monitoring fast output changes, such as dips and spikes.

Output Voltage Selector Switch—Power supplies with an output voltage selector switch let you toggle between two voltage and current output ranges.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single-Phase Input—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC	0 amp to 2 amp	0 W to 60 W	5 mV DC	Front	Constant Current, Constant Voltage	4.3"	8"	8.3"	Overcurrent, Overload	7686K21	0000000


		Standard Banana Socket	0V DC to 18V DC, 0V DC to 36V DC	0 amp to 7 amp, 0 amp to 3.5 amp	0 W to 126 W	4 mV DC	Front	Constant Current, Constant Voltage, Output Voltage Selector Switch	5.5"	12.1"	10.5"	Overcurrent, Overload	7686K26	000000

With 2 Output Power Connections—Analog Display

Analog displays are better than digital displays for monitoring fast output changes, such as dips and spikes.

Over Temperature—Those with overvoltage or over temperature protection will shut down if you exceed the maximum voltage or temperature.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single-Phase Input—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC 0V DC to 30V DC	0 amp to 3 amp 0 amp to 3 amp	0 W to 90 W 0 W to 90 W	5 mV DC 5 mV DC	Front	Constant Current, Constant Voltage	5.5"	12.1"	10.5"	Over Temperature, Overcurrent, Overload	7686K29	0000000

With 3 Output Power Connections—Digital Display

Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

Overvoltage—Those with overvoltage or over temperature protection will shut down if you exceed the maximum voltage or temperature.

UL Listed and C-UL Listed—UL and C-UL listed power supplies meet U.S. and Canadian safety standards.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type	Certification	Includes		Each
Single-Phase Input—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC 0V DC to 30V DC 4V DC to 6.5V DC	0 amp to 2 amp 0 amp to 2 amp 5 amp	0 W to 60 W 0 W to 60 W 20 W to 32.5 W	3 mV DC 3 mV DC 6 mV DC	Front	Constant Current, Constant Voltage	5.7"	10.5"	15"	Overcurrent, Overload, Overvoltage	UL Listed C-UL Listed	Two Pairs of Test Leads (Banana Jack to Alligator Clip)	5775N12	0000000


		Standard Banana Socket	0V DC to 32V DC 0V DC to 32V DC 5V DC	0 amp to 3 amp 0 amp to 3 amp 3 amp	0 W to 96 W 0 W to 96 W 15 W	1 mV DC 1 mV DC 1 mV DC	Front	Constant Current, Constant Voltage	6.7"	9"	12.2"	Overload	—	Two Pairs of Test Leads (Banana Jack to Alligator Clip)	5775N21	000000
		Standard Banana Socket	0V DC to 60V DC 0V DC to 60V DC 2V DC to 6.5V DC	0 amp to 2 amp 0 amp to 2 amp 5 amp	0 W to 120 W 0 W to 120 W 10 W to 32.5 W	3 mV DC 3 mV DC 6 mV DC	Front	Constant Current, Constant Voltage	5.7"	10.5"	15"	Overcurrent, Overload, Overvoltage	—	Two Pairs of Test Leads (Banana Jack to Alligator Clip)	5775N13	000000

With 4 Output Power Connections—Digital Display

Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type	Includes		Each
Single-Phase Input—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC 0V DC to 30V DC 3V DC to 6.5V DC 8V DC to 15V DC	0 amp to 5 amp 0 amp to 5 amp 1 amp 3 amp	0 W to 150 W 0 W to 150 W 9 W to 19.5 W 8 W to 15 W	3 mV DC 3 mV DC 6 mV DC 6 mV DC	Front	Constant Current, Constant Voltage	6.3"	10.2"	14.6"	Overcurrent, Overload	Four Pairs of Test Leads (Banana Jack to Alligator Clip)	5773N13	0000000

Low-Profile DIN-Rail-Mount Power Supplies

Power Supply on DIN

Rail

Less than 2 _1/2" deep, mount these power supplies to a DIN rail in shallow enclosures and control panels, such as those used in building automation systems. They briefly boost power above their maximum operating current to start motors, actuate solenoid valves, and other applications that require a higher starting current than their operating current. All of this means you get a more powerful power supply in a compact size.

If your power supply exceeds the maximum voltage or load, these power supplies protect both the power supply and the connected equipment. Some also protect against excessive temperatures. All meet the voltage requirements for use in a SELV (separated extra low voltage) circuit.

Rated IP20, these power supplies prevent your fingers from touching internal components and accidentally shocking yourself. They have also passed strict U.S., Canadian, and European Union safety standards.

	Output
	No. of Power Connections	Voltage	Voltage Adjustment Range, V DC	Current	Peak Current, amp	Peak Current Duration, sec.	Power	Max. Noise Peak-to-Peak	Power Factor @ Voltage	Efficiency @ Voltage	For Extra-Low Voltage Circuit Type	Enclosure Rating	Ht.	Wd.	Dp.	Certification	Electrical Protection Type		Each
Single-Phase Input—90V AC to 240V AC Input Voltage







				Screw-Clamp Terminal Input and Output Connection

				1	5V DC	4.75 to 5.5	2 amp	2.4	3	10 W	80 mV DC	Not Rated	79% @ 230V AC	SELV	IP20	3.5"	0.7"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N41	000000


				1	5V DC	4.75 to 5.5	3 amp	3.6	3	15 W	80 mV DC	Not Rated	82% @ 230V AC	SELV	IP20	3.5"	1.4"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N42	00000
				1	12V DC	10.8 to 13.2	1.25 amp	1.5	3	15 W	120 mV DC	Not Rated	85% @ 130V AC	SELV	IP20	3.5"	0.7"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N45	00000
				1	12V DC	10.8 to 13.2	2 amp	2.4	3	24 W	120 mV DC	Not Rated	88% @ 230V AC	SELV	IP20	3.5"	1.4"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N46	00000
				1	15V DC	13.5 to 16.5	1 amp	1.2	3	15 W	120 mV DC	Not Rated	85% @ 130V AC	SELV	IP20	3.5"	0.7"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N51	00000
				1	15V DC	13.5 to 16.5	2 amp	2.4	3	30 W	120 mV DC	Not Rated	89% @ 230V AC	SELV	IP20	3.5"	1.4"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N52	00000
				1	24V DC	21.6 to 26.4	0.63 amp	0.75	3	15 W	150 mV DC	Not Rated	86% @ 230V AC	SELV	IP20	3.5"	0.7"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N56	00000
				Low-Profile DIN-Rail-Mount Power Supply, 90-240V AC Input, 24V DC Output, 0.63A Output Product Detail QuantityEachIn stock
				1	24V DC	21.6 to 26.4	1 amp	1.2	3	24 W	150 mV DC	Not Rated	89% @ 230V AC	SELV	IP20	3.5"	1.4"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N57	00000
				2	5V DC	4.75 to 5.5	4.5 amp	5.4	3	23 W	80 mV DC	Not Rated	85% @ 130V AC	SELV	IP20	3.5"	2"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N44	00000
				2	12V DC	11.1 to 13.2	4.5 amp	5.4	3	54 W	120 mV DC	Not Rated	88% @ 230V AC	SELV	IP20	3.5"	2"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N48	00000
				2	12V DC	11.1 to 13.2	7.1 amp	8.5	3	86 W	120 mV DC	Not Rated	88% @ 230V AC	SELV	IP20	3.5"	2.8"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Over Temperature, Overload, Overvoltage	3670N49	00000


				2	15V DC	13.5 to 16.5	4 amp	4.8	3	60 W	120 mV DC	Not Rated	89% @ 230V AC	SELV	IP20	3.5"	2"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N54	00000
				2	15V DC	13.5 to 16.5	6.13 amp	7.3	3	92 W	120 mV DC	Not Rated	89% @ 230V AC	SELV	IP20	3.5"	2.8"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Over Temperature, Overload, Overvoltage	3670N55	00000
				2	24V DC	21.6 to 26.4	2.5 amp	3	3	60 W	150 mV DC	Not Rated	90% @ 230V AC	SELV	IP20	3.5"	2"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Overload, Overvoltage	3670N59	00000
				2	24V DC	21.6 to 26.4	3.8 amp	4.2	3	100 W	150 mV DC	Not Rated	90% @ 230V AC	SELV	IP20	3.5"	2.8"	2.3"	UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	Over Temperature, Overload, Overvoltage	3670N61	00000

Heavy Duty Motor-Starting DIN-Rail-Mount Power Supplies


Single-Phase Input, Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal	Single-Phase Input, Spring-Clamp-Terminal Input and Output Connection—With Output Voltage Signal

Three-Phase Input, Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal	Three-Phase Input, Spring-Clamp-Terminal Input and Output Connection—With Output Voltage Signal

Made of durable components for a long life in demanding conditions, these power supplies convert AC voltage to power DC motors and other devices that require high start-up current. They briefly boost power above their maximum output, which means you don't have to use an oversized power supply just to handle occasional spikes. Mount them onto DIN rails in marine, heavy industrial, and other tough environments. Power supplies with spring-clamp terminals connect quicker and hold firmer than screw-style terminals.

Because they're made to the highest quality standards, you can rely on these power supplies to run critical automation and process control systems. They maintain a stable output, even in facilities with electrical noise, voltage fluctuation, or poor power quality. Compared to standard power supplies, they require less start-up current, which further improves stability. All use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. Some are also SEMI F47 compliant, meaning they meet standards for maintaining output voltage when input voltage dips. This is commonly known as voltage sag immunity.

If you exceed the maximum voltage, temperature, or load, these power supplies shut down to protect both the power supply and the connected equipment. They also meet the voltage requirements for use in SELV (separated extra low voltage) or PELV (protected extra low voltage) circuits.

Rated IP20, these power supplies prevent your fingers from touching internal components and accidentally shocking yourself. With various domestic and international certifications, such as UL listing, CE marking, and TUV certification, these power supplies meet stringent safety standards. Some meet additional standards for marine vessels classed by DNV-GL and ABS.

Supplies that have a Class I, Division 2 environmental rating are safe for use in environments that are not normally hazardous, but where concentrations of combustible gases may occur infrequently. Some power supplies have ATEX and IECEx certifications, which are international ratings for hazardous environments.

Cannot Be Sold To—Power supplies that cannot be sold to the regions listed are restricted by local energy efficiency requirements.

	Output
	Voltage, V DC	Voltage Adjustment Range, V DC	Current, amp	Peak Current, amp	Peak Current Duration, sec.	Max. Noise Peak-to-Peak, mV DC	Power Factor @ Voltage	Efficiency @ Voltage	For Extra-Low Voltage Circuit Type	Enclosure Rating	Hazardous Location Rating	Cannot Be Sold To		Each
Single-Phase Input—100-240V AC Input Voltage







				Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal

				12	12 to 15	16	24	4	100	0.98 @ 115V AC 0.92 @ 230V AC	86.5% @ 230V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	3721N101	0000000


				24	23.5 to 28.5	5	7.5	4	50	0.98 @ 115V AC 0.92 @ 230V AC	88% @ 230V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	3721N102	000000
				24	23.5 to 28.5	10	15	4	50	0.98 @ 115V AC 0.92 @ 230V AC	90% @ 230V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	3721N103	000000
				24	23.5 to 28.5	20	30	4	100	0.98 @ 115V AC 0.92 @ 230V AC	92% @ 230V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	7009K11	000000
				24	23.5 to 28.5	40	60	4	100	0.98 @ 115V AC 0.92 @ 230V AC	93% @ 230V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	3721N104	00000000




						Spring-Clamp-Terminal Input and Output Connection—With Output Voltage Signal

						12	12 to 15	10	15	4	200	0.88 @ 230V AC	91.4% @ 110V AC 93.2% @ 230V AC	SELV	IP20	—	California, Vermont	3721N114	000000


						24	24 to 28	5	7.5	4	200	0.87 @ 230V AC	92.7% @ 110V AC 94.5% @ 230V AC	SELV	IP20	—	California, Vermont	3721N107	000000
						24	24 to 28	10	15	4	200	0.95 @ 230V AC	92.8% @ 110V AC 94.3% @ 230V AC	SELV	IP20	—	California, Vermont	3721N108	000000
						24	24 to 28	20	30	4	200	0.96 @ 230V AC	91.7% @ 110V AC 94.1% @ 230V AC	SELV	IP20	—	—	3721N109	000000
						48	48 to 56	2.5	3.75	4	200	0.87 @ 230V AC	92.8% @ 110V AC 94.6% @ 230V AC	SELV	IP20	—	California, Vermont	3721N111	000000
						48	48 to 56	5	7.5	4	200	0.95 @ 230V AC	93.7% @ 110V AC 95.1% @ 230V AC	SELV	IP20	—	California, Vermont	3721N112	000000
						48	48 to 56	10	15	4	200	0.94 @ 230V AC	95% @ 230V AC	SELV	IP20	—	—	3721N113	000000


						Three-Phase Input—200-240V AC Input Voltage







										Spring-Clamp-Terminal Input and Output Connection—With Output Voltage Signal

										24	24 to 28	40	60	10	60	0.9 @ 230V AC	95% @ 200V AC 95% @ 230V AC	PELV	IP20	—	—	3721N122	000000


										24	24 to 29.5	10	15	10	50	0.9 @ 230V AC	93% @ 200V AC 93% @ 230V AC	PELV	IP20	—	—	3721N119	000000
										24	24 to 29.5	20	30	10	120	0.9 @ 230V AC	94% @ 200V AC 94% @ 230V AC	PELV	IP20	—	—	3721N121	000000


										Three-Phase Input—360-500V AC Input Voltage







														Spring-Clamp-Terminal Input and Output Connection—With Output Voltage Signal

														24	24 to 28	3.7	5.55	5	50	0.61 @ 400V AC	92.5% @ 400V AC 91.8% @ 480V AC	SELV	IP20	—	—	3721N115	000000


														24	24 to 28	12	18	5	50	0.66 @ 500V AC	93.7% @ 400V AC 93.2% @ 480V AC	SELV	IP20	—	—	3721N116	000000
24														24 to 28	15	22.5	5	90	0.65 @ 500V AC	94.8% @ 400V AC 94.5% @ 480V AC	SELV	IP20	—	—	3721N117	000000
24	24 to 28													30	45	5	90	0.88 @ 500V AC	93.7% @ 400V AC 93.5% @ 480V AC	SELV	IP20	—	—	3721N118	000000


Three-Phase Input—380-480V AC Input Voltage







														Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal

														24	23.5 to 28.5	5	7.5	4	50	Not Rated	85% @ 380V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	California, Vermont	7009K51	000000


														24	23.5 to 28.5	10	15	4	50	Not Rated	91% @ 380V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	3721N105	000000
														24	23.5 to 28.5	20	30	4	100	0.92 @ 480V AC	93% @ 380V AC	SELV	IP20	ATEX II 3 G Ex Ec nC IIC T4 Gc; Ex nA nC IIC; IEC Zone 2 Groups IIC, IIB, IIA; IECEx Ex Ec nC IIC T4 Gc; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	3721N106	000000
				24										23.5 to 28.5	40	60	4	100	0.92 @ 480V AC	94% @ 380V AC	SELV	IP20	Ex nA nC IIC; NEC Class I Division 2 Groups A, B, C, D; NEC Zone 2 Groups IIC, IIB, IIA; AEx nA nC IIC	—	7009K54	00000000

Bench-Mount Power Supplies

Convert AC voltage into the DC voltages needed to test, design, and prototype a wide variety of electrical circuits and equipment. These power supplies let you adjust the output to the exact voltage needed to power your equipment. You can also set limits on the maximum current to protect your equipment from damage. Keep an eye on the voltage and current drawn by your connected components with the digital display.

Since these use switching regulation, they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and won’t become too hot.

When these power supplies convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this won't affect most applications, this noise can interfere with other signals in extremely sensitive applications. The lower the output noise, the less interference it creates.

These power supplies are CE Marked, which means they meet European Union safety standards. If your power supply exceeds the maximum current, voltage, or load, they’ll shut down to protect both the power supply and the connected equipment. Some also protect against excessive temperatures.

Connect the banana plugs on your equipment to the socket output connections.

1 Output Power Connection—Banana Jack Socket

Output Voltage Selector Switch—Power supplies with output voltage selector switch let you choose either an adjustable output, which you control with a dial, or an output fixed at 13.8V DC.

	Output							Front Auxiliary Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Voltage, V DC	Current, amp	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single-Phase Input—120V AC Input Voltage



		Standard Banana Socket	1V DC to 30V DC	1 amp to 20 amp	1 W to 600 W	50 mV DC	Back	Constant Current, Constant Voltage	1 to 30	1 to 5	3.5"	7.9"	8.5"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N16	0000000


		Standard Banana Socket	13.8V DC, 3V DC to 15V DC	40 amp	552 W, 120 W to 600 W	30 mV DC	Front	Constant Current, Constant Voltage, Output Voltage Selector Switch	—	—	4.4"	11.9"	8.6"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N12	000000


		Single-Phase Input—120/240V AC Input Voltage



				Standard Banana Socket	1V DC to 15V DC	60 amp	60 W to 900 W	40 mV DC	Back	Constant Current, Constant Voltage, Remote Signaling	1 to 15	1 to 3	4.3"	8.7"	14.2"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N13	000000


				Standard Banana Socket	1V DC to 30V DC	30 amp	30 W to 900 W	40 mV DC	Back	Constant Current, Constant Voltage, Remote Signaling	1 to 30	1 to 5	4.3"	8.7"	14.2"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N14	000000

2 Output Power Connections—Banana Jack Socket and USB-A Socket

Image of Product. Front orientation. Power Supplies. Bench-Mount Power Supplies, 2 Output Power Connections.

USB-A—Power supplies with USB-A output connections can also charge phones and other devices with USB-A ports. You can use more than one output at the same time, but you can’t adjust them independently—all outputs are set to the voltage you select.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single-Phase Input—120V AC Input Voltage



		Standard Banana Socket USB-A Socket	1V DC to 36V DC 5V DC	0 amp to 3 amp 0.4 amp	0 W to 108 W 2 W	50 mV DC 8 mV DC	Front	Constant Current, Constant Voltage	6"	2.9"	9.9"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N11	0000000

3 Output Power Connections—Banana Jack Socket and Lever-Clamp Terminals

Image of Product. Front orientation. Power Supplies. Bench-Mount Power Supplies, 3 Output Power Connections.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single-Phase Input—120/240V AC Input Voltage



		Standard Banana Socket Lever-Clamp Terminal Lever-Clamp Terminal	0V DC to 30V DC 12V DC 5V DC	0 amp to 5 amp 0.5 amp 0.5 amp	0 W to 150 W 6 W 2.5 W	15 mV DC 15 mV DC 15 mV DC	Front	Constant Current, Constant Voltage	5"	8.5"	11.5"	Overcurrent, Overload, Overvoltage	5772N15	0000000

Desktop Computer Power Supplies


4+4 Pin ATX	20+4 Pin ATX	Floppy-Disk Drive Molex Mini-Fit 4 Pin

PCI-E 6+2 Pin Molex Mini-Fit	Peripheral AMP	Standard SATA

Convert AC voltage to DC voltage to power components inside desktop computers. These power supplies meet ATX industry standards, so they fit into most desktop computers. The higher the energy efficiency of a power supply, the lower the operating costs will be. These power supplies generate enough power for PCs with dedicated graphics cards and computers used for intensive tasks such as video editing and CAD design.

	Output
	Voltage	Current	Power	Standby Current @ Voltage	Plug Type (No. of)	Energy Efficiency Rating	Efficiency @ Voltage	Ht.	Wd.	Dp.	Cable Lg., ft.		Each
100V AC to 240V AC Input Voltage



		3.3V DC 5V DC 12V DC	22 amp 17 amp 42 amp	600 W	2.5 amp @ 5V DC	4+4 Pin ATX (1) 20+4 Pin ATX (1) Floppy-Disk Drive Molex Mini-Fit 4 Pin (3) PCI-E 6+2 Pin Molex Mini-Fit (2) Peripheral AMP (1) Standard ATA Molex Mini-Fit 5 (6)	80 PLUS Bronze	82% @ 115V AC 82% @ 230V AC	3.4"	5.9"	5.5"	2	3737N12	000000

Programmable Bench-Mount Power Supplies

Use your computer to remotely control these power supplies that convert AC voltage to DC voltage for powering electronics from simple prototypes to advanced testing equipment. All of these power supplies include a USB cable and Windows-compatible software to control, monitor, and record the voltage, current, and power outputs of your device. You can also create programs with up to 20 steps that change voltage and current outputs at set times. A selector switch lets you quickly choose up to three defined settings for voltage and current outputs. The power supplies have an auxiliary output connection, but it will take on the same settings as the primary outputs. View the outputs on their digital display.

These power supplies use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. If you exceed the maximum voltage, current, load, or temperature, the power supplies will shut down to protect both the power supply and the connected device.

Remote Voltage Sensing—Power supplies with remote voltage sensing check for any drops in the voltage as they send power to a device. If the voltage dips, they can compensate with extra power, so connected devices always receive the correct voltage.

Maximum Output Noise Peak-to-Peak—Maximum output noise is also known as ripple noise. When power supplies convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this noise won't affect most applications, it can interfere with other signals in extremely sensitive audio, measuring, and testing equipment. The lower the output noise, the less interference it creates.

		Output												Front Auxiliary Output
	Display Type	No. of Power Connections	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Ht.	Wd.	Dp.	Electrical Protection Type	Output Connection Location	Output Features	Voltage, V DC	Current, amp		Each
Single-Phase Input—120V AC Input Voltage



		Digital	1	Standard Banana Socket	1V DC to 16V DC	0 amp to 60 amp	0 W to 960 W	50 mV DC	3.5"	7.9"	10.8"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage, Remote Voltage Sensing	1 to 16	0 to 5	5774N14	0000000


		Digital	1	Standard Banana Socket	1V DC to 32V DC	0 amp to 30 amp	0 W to 960 W	50 mV DC	3.5"	7.9"	10.8"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 32	0 to 5	5774N15	000000
		Digital	1	Standard Banana Socket	1V DC to 60V DC	0 amp to 15 amp	0 W to 900 W	100 mV DC	3.5"	7.9"	10.8"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 60	0 to 5	5774N16	000000


		Single-Phase Input—120, 240V AC Input Voltage



				Digital	1	Standard Banana Socket	1V DC to 18V DC	0 amp to 20 amp	0 W to 360 W	50 mV DC	3.5"	7.9"	8.2"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 18	0 to 5	5774N13	000000


				Digital	1	Standard Banana Socket	1V DC to 36V DC	0 amp to 10 amp	0 W to 360 W	50 mV DC	3.5"	7.9"	8.2"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 36	0 to 5	5774N12	000000
				Digital	1	Standard Banana Socket	1V DC to 60V DC	0 amp to 5 amp	0 W to 300 W	50 mV DC	3.5"	7.9"	8.2"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 60	0 to 5	5774N11	000000

Motor-Starting DIN-Rail-Mount Power Supplies

Single-Phase Input, Screw-Terminal

Input and Output Connection

Single-Phase Input, Screw-Clamp

Terminal Input and Output

Connection—With Output Voltage

Signal, Remote On/Off

Three-Phase Input, Screw-Clamp

Terminal Input and Output

Connection

Convert AC voltage to power DC motors, solenoid valves, charging capacitors, and other devices that require large start-up current. These power supplies mount onto DIN rails and are capable of briefly boosting power above their maximum output. It means you don't have to use an oversized power supply just to handle spikes in demand. With a set of standard features, they're a cost-effective way to power motors in clean, controlled environments that have a stable supply of electricity. They're not recommended for tough industrial environments.

With various domestic and international certifications, such as UL listing, CE marking, and TUV certification, these power supplies meet stringent safety standards. Some meet additional standards for marine vessels classed by DNV-GL. Power supplies with an IP20 rating prevent your fingers from touching internal components and accidentally shocking yourself.

Remote On/Off—They have a remote on/off feature that can be controlled by connecting to an external DC power source, such as a battery. Configure the power source to send a signal when you press a button or flip a switch, and the power supply will turn on or off.

Cannot Be Sold To—Power supplies that cannot be sold to the regions listed are restricted by local energy efficiency requirements.

	Output
	Voltage, V DC	Voltage Adjustment Range, V DC	Current, amp	Peak Current	Peak Current Duration, sec.	Max. Noise Peak-to-Peak, mV DC	Power Factor @ Voltage	Efficiency @ Voltage	For Extra-Low Voltage Circuit Type	Enclosure Rating	Cannot Be Sold To		Each
Single-Phase Input—100-240V AC Input Voltage







				Screw-Terminal Input and Output Connection

				12	11 to 14	2.1	2.1 amp	2	100	Not Rated	85% @ 115V AC 85% @ 130V AC	SELV	—	—	3720N204	000000


				12	12 to 14	10	Not Rated	—	300	Not Rated	93% @ 230V AC	SELV	—	—	3720N206	00000




						Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal, Remote On/Off

						24	22.5 to 26.4	20	30 amp	5	150	0.98 @ 115V AC 0.93 @ 230V AC	92% @ 115V AC 94% @ 230V AC	SELV	—	—	3720N124	000000


						24	22.5 to 28.5	5	7.5 amp	5	150	0.98 @ 115V AC 0.93 @ 230V AC	90% @ 115V AC 92% @ 230V AC	SELV	—	California, Vermont	3720N21	000000
						24	22.5 to 28.5	10	15 amp	5	150	0.98 @ 115V AC 0.93 @ 230V AC	92% @ 115V AC 94% @ 230V AC	SELV	—	California, Vermont	3720N122	000000
						48	45 to 55.2	10	15 amp	5	150	0.98 @ 115V AC 0.93 @ 230V AC	92% @ 115V AC 94% @ 230V AC	SELV	—	—	3720N125	000000
						48	47.1 to 51.8	5	7.5 amp	3	300	0.96 @ 115V AC 0.96 @ 230V AC	92% @ 230V AC	—	IP20	California	3720N102	00000


						Single-Phase Input—180-240V AC Input Voltage







										Screw-Clamp Terminal Input and Output Connection—With Output Voltage Signal, Remote On/Off

										24	24 to 28	40	60 amp	4	240	0.98 @ 230V AC	95% @ 230V AC	SELV	—	—	3720N116	000000


										Three-Phase Input—320-575V AC Input Voltage







														Screw-Clamp Terminal Input and Output Connection

														24	24 to 28	5	—	—	150	Not Rated	87.5% @ 400V AC 87.5% @ 500V AC	SELV	IP20	—	3720N128	00000


														24	24 to 28	40	—	—	200	0.9 @ 400V AC 0.9 @ 500V AC	94.5% @ 400V AC 96% @ 500V AC	SELV	IP20	—	3720N117	000000

Compact Motor-Starting DIN-Rail-Mount Power Supplies

Sized to fit into small and cramped enclosures, these compact power supplies mount onto DIN rails to convert AC to DC voltage. Despite their size, they're designed to power motors, solenoid valves, and other devices that require large start-up current. To do so, they briefly boost power above their maximum output current. This means you don't have to use an oversized power supply just to handle occasional spikes in demand.

If you exceed the maximum voltage, current, or load, these power supplies shut down to protect both the power supply and the connected equipment. They also meet the voltage requirements for use in an SELV (separated extra low voltage) circuit.

Rated IP20, these power supplies prevent your fingers from touching internal components and accidentally shocking yourself. They're UL and C-UL certified and CE marked so you know they meet stringent safety standards. With Class I, Division 2, Groups A, B, C, and D environmental ratings, all are safe for use in environments that are not normally hazardous, but where concentrations of combustible gases may occur infrequently.

Cannot Be Sold to California and Cannot Be Sold to Vermont—Power supplies cannot be sold to California or Vermont due to energy efficiency requirements.

	Output
	Voltage, V DC	Voltage Adjustment Range, V DC	Current, amp	Peak Current	Peak Current Duration	Power, W	No. of Power Connections	Max. Noise Peak-to-Peak, mV DC	Efficiency @ Voltage	Ht.	Wd.	Dp.	Cannot Be Sold To		Each
Single-Phase Input—100-240V AC Input Voltage







				Screw-Clamp Terminal Input and Output Connection

				5	5 to 6	5	7.5 amp	Continuous	25	2	50	80% @ 230V AC	2.95"	1.77"	3.8"	California, Vermont	7009K21	0000000


				12	10 to 12	2.5	3.75 amp	Continuous	30	2	50	80% @ 230V AC	2.95"	1.77"	3.8"	—	3723N101	000000
				15	12 to 15	3.4	5.1 amp	Continuous	50	2	50	86% @ 230V AC	2.95"	1.77"	3.8"	California, Vermont	7009K19	000000
				24	22.5 to 28.5	0.6	0.84 amp	2 sec.	15	1	50	80% @ 230V AC	2.95"	0.9"	3.8"	—	3723N102	000000
				24	22.5 to 28.5	1.3	1.82 amp	2 sec.	30	2	50	83% @ 230V AC	2.95"	1.77"	3.58"	—	3723N103	000000
				24	22.5 to 28.5	2.1	2.94 amp	2 sec.	50	2	50	86% @ 230V AC	2.95"	1.77"	3.58"	California, Vermont	7009K16	000000
				24	22.5 to 28.5	4.2	5.88 amp	2 sec.	92	2	50	88% @ 230V AC	2.95"	2.85"	3.8"	California, Vermont	7009K18	000000
				24	24 to 25.7	3.8	Not Rated	—	100	2	50	88% @ 230V AC	2.95"	2.85"	3.8"	California, Vermont	7009K17	000000
				48	48 to 56	1.05	1.575 amp	Continuous	50	2	50	90% @ 230V AC	2.95"	1.77"	3.8"	California, Vermont	7009K22	000000

Multiple-Voltage DIN-Rail-Mount Power Supplies


	DIN 3 Rail

Power multiple devices with different voltages at the same time. These power supplies convert AC to DC voltage or step down high DC voltages to low DC voltages. Mount them to the DIN rails inside industrial cabinets and electrical panels, or unscrew the DIN clips to mount to any flat surface.

If you exceed the maximum temperature or load, these power supplies shut down to protect both the power supply and the connected equipment.

Rated IP20, they are designed to stop your fingers from touching internal components, which prevents accidental shocks. With various certifications, such as CE Marked, UL recognized, and C-UL recognized, these power supplies meet stringent safety standards. They have been safety tested for both AC and DC voltage inputs. They also meet specifications for UL 94 V-0, so they will self-extinguish within ten seconds if they catch fire, and won’t cause additional fires by dripping.

Maximum output noise is also known as ripple noise. The lower the value, the less interference the power supply creates. For most applications, a value over 100mVpp isn’t a problem. However, when using to power extremely sensitive electronics, such as audio equipment and high-precision measuring and testing equipment, you’ll want an output noise around 5mVpp or less.

	Output
	No. of Power Connections	Voltage	Current	Power	Max. Noise Peak-to-Peak	Power Factor @ Voltage	Efficiency @ Voltage	Enclosure Rating	Ht.	Wd.	Dp.	Certification	Flammability Rating	Electrical Protection Type	No. of Mounting Holes		Each
Single-Phase Input—100 to 240V AC/100 to 353V DC Input Voltage







				Screw-Clamp Terminal Input and Output Connection

				2	5V DC 12V DC	3 amp 1.2 amp	30 W	100 mV DC 240 mV DC	0.55 @ 120V AC 0.44 @ 240V AC	68% @ 120V AC 68% @ 240V AC 68% @ 110V DC	IP20	4.7"	2.6"	1.3"	C-UL Recognized Component CE Marked UL Recognized Component	UL 94 V-0	Over Temperature, Overload	5	3725N11	0000000


				2	5V DC 24V DC	3 amp 0.6 amp	30 W	100 mV DC 480 mV DC	0.55 @ 120V AC 0.43 @ 240V AC	68% @ 120V AC 68% @ 240V AC 68% @ 110V DC	IP20	4.7"	2.6"	1.3"	C-UL Recognized Component UL Recognized Component	UL 94 V-0	Over Temperature, Overload	5	3725N12	000000
				2	12V DC -12V DC	1.2 amp 1.2 amp	30 W	240 mV DC 240 mV DC	0.56 @ 120V AC 0.45 @ 240V AC	68% @ 120V AC 68% @ 240V AC 68% @ 110V DC	IP20	4.7"	2.6"	1.3"	C-UL Recognized Component UL Recognized Component	UL 94 V-0	Over Temperature, Overload	6	3725N15	000000
				2	15V DC -15V DC	1 amp 1 amp	30 W	300 mV DC 300 mV DC	0.59 @ 120V AC 0.46 @ 240V AC	68% @ 120V AC 68% @ 240V AC 68% @ 110V DC	IP20	4.7"	2.6"	1.3"	C-UL Recognized Component UL Recognized Component	UL 94 V-0	Over Temperature, Overload	6	3725N16	000000
				3	5V DC 12V DC -12V DC	3 amp 0.6 amp 0.6 amp	30 W	100 mV DC 240 mV DC 240 mV DC	0.55 @ 120V AC 0.43 @ 240V AC	68% @ 120V AC 68% @ 240V AC 68% @ 110V DC	IP20	4.7"	2.6"	1.3"	C-UL Recognized Component UL Recognized Component	UL 94 V-0	Over Temperature, Overload	5	3725N13	000000
				3	5V DC 15V DC -15V DC	3 amp 0.5 amp 0.5 amp	30 W	100 mV DC 300 mV DC 300 mV DC	0.56 @ 120V AC 0.44 @ 240V AC	68% @ 120V AC 68% @ 240V AC 68% @ 110V DC	IP20	4.7"	2.6"	1.3"	C-UL Recognized Component CE Marked UL Recognized Component	UL 94 V-0	Over Temperature, Overload	5	3725N14	000000

Sealed Power Supplies


3-Pole M22 Plug Input and 4-Pole M22 Socket Output	3-Pole M22 Plug Input and 5-Pole M22 Socket Output	Wire Leads Input and Output


3-Pole M22 Plug	4-Pole M22 Socket

5-Pole M22 Socket

Completely sealed and protected from dust and water, these power supplies don't need a separate electrical panel or enclosure. Instead, mount them directly to machine tools, process control equipment, conveyors, and other equipment found in harsh industrial areas. They convert AC voltage to deliver DC power right at the point of need, reducing the need for complex wiring.

Rated IP67, all of these power supplies are safe for use in dusty, humid, and wet locations, as well as in applications where the power supply may be briefly submerged in water.

Although sealed in a housing, these power supplies have excellent heat dissipation, so they run reliably even as temperatures rise. They use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t create much heat. Some of these power supplies are also SEMI F47 compliant, which means they meet standards for maintaining output voltage when input voltage dips. This is commonly known as voltage sag immunity.

If you exceed the maximum voltage or load, these power supplies shut down to protect both the power supply and the connected equipment. They also meet the voltage requirements for use in a SELV (separated extra low voltage) circuit. With various domestic and international certifications, such as UL listing and CE marking, you can be sure they meet stringent safety standards.

IP66 Enclosure Rating—IP66-rated power supplies can also withstand frequent washdowns.

IP68 Enclosure Rating—IP68-rated power supplies are safe for use outdoors as well as under water for extended periods. They're tested to withstand submersion in 1 meter of water for 40 days.

Cannot Be Sold to California and Cannot Be Sold to Vermont—Power supplies that cannot be sold to California and Vermont do not meet energy efficiency requirements.

	Output
	Voltage, V DC	Current, amp	Peak Current, amp	Peak Current Duration, sec.	Power, W	Max. Noise Peak-to-Peak, mV DC	No. of Output Connections per Circuit	Power Factor @ Voltage	Efficiency @ Voltage	Ht.	Wd.	Dp.	Enclosure Rating	Cannot Be Sold To		Each
Single-Phase Input—90-265V AC Input Voltage







				3-Pole M22 Plug Input and 5-Pole M22 Socket Output

				24	4	6	4	96	300	1	0.98 @ 230V AC	91.7% @ 115V AC 92.4% @ 230V AC	2.1"	4.4"	5.6"	IP67	California, Vermont	3580N15	0000000


				24	8	12	4	96	300	1	0.95 @ 230V AC	93% @ 115V AC 94.2% @ 230V AC	2.1"	4.4"	6.9"	IP67	California, Vermont	3580N16	000000


				Single-Phase Input—100-240V AC Input Voltage







								3-Pole M22 Plug Input and 4-Pole M22 Socket Output

								24	3.8	—	—	100	50	1	0.9 @ 230V AC	84% @ 115V AC 84% @ 230V AC	1.9"	7.2"	4.9"	IP66, IP67	California, Vermont	3580N13	000000


								24	7.6	—	—	100	50	4	0.9 @ 230V AC	85% @ 115V AC 85% @ 130V AC	3.4"	7.2"	4.9"	IP66, IP67	California, Vermont	3580N14	00000000


								Single-Phase Input—100-277V AC Input Voltage







												Wire Leads Input and Output

												24	25	—	—	600	240	2	0.9 @ 230V AC	89% @ 115V AC 90% @ 230V AC	2.4"	4.9"	9.9"	IP66, IP67, IP68	—	3580N11	000000

High-Speed AC to DC Electromagnet Transformers

Suitable for high-speed automated applications, these transformers reverse the magnetic current and release your electromagnet's hold faster than other electromagnet transformers. Turn off the transformer and the magnetic current reverses automatically for release. The transformer's output power wattage should be equal to or greater than the watts of your electromagnet. All are rated NEMA 12 for protection from oil/coolant dripping. Also known as rectifiers.

Cannot Be Sold To—Transformers cannot be sold to the regions listed due to local energy efficiency requirements.

		Output					Mounting
	Input Voltage, V AC	Voltage, V DC	Power, W	Ht.	Wd.	Dp.	Number of Holes	Hole Diameter	Fasteners Included	Housing Material	Max. Temp., ° F	Cannot Be Sold To		Each
Single-Phase Input—Terminal-Block Input and Output Connection







				Step-Down Voltage

				120, 240	12	100	12"	10"	5"	4	9/32"	No	Steel	140	California, Vermont	5888K28	000000000


				120, 240	24	100	12"	10"	5"	4	9/32"	No	Steel	140	California, Vermont	5888K38	00000000
				240, 480	110	100	12"	10"	5"	4	9/32"	No	Steel	140	California, Vermont	5888K47	00000000

Remote On/Off Power Supplies

Save power by switching these power supplies on and off remotely, so devices only run when they're needed. Use them to convert AC voltage to DC to power electronic equipment ranging from simple prototypes to complex industrial automation and process control equipment. Mount them to a surface inside your device’s enclosure.

Besides turning them on and off, these power supplies have two other remote capabilities. Remote voltage sensing lets them compensate for any voltage that’s lost as it travels across the wires, ensuring that devices get the correct voltage. They also send a signal if the voltage drops, the cooling fan fails, or they exceed the maximum current, load, voltage, or temperature.

So you don’t accidentally touch internal components and shock yourself, these power supplies have their own housing. They're good to use in spots where you occasionally need to access the inside of your device’s enclosure, since the housing also protects the power supplies themselves.

For output wire connections, they have either standard screw terminals or quick-disconnect terminals. Choose quick-disconnect terminals if you have wires with ring terminal ends. To connect them, slide a screw through the hole in the quick-disconnect terminal, slip the ring terminal from your wire over the screw, and tighten a nut on the end of the screw to hold everything in place. Screws, nuts, and ring terminals are not included.

All of these power supplies use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. In addition to sending a signal, if you exceed the maximum current, load, voltage, or temperature, these power supplies shut down to protect both the power supply and the connected equipment.

They're UL and C-UL Recognized Components, TUV Rheinland Certified, and CE Marked so you know they meet stringent safety standards.

	Output
	Voltage, V DC	Voltage Adjustment Range, V DC	Current, amp	Power, W	Max. Noise Peak-to-Peak, mV DC	Power Factor @ Voltage	Efficiency @ Voltage	Electrical Connection	Ht.	Wd.	Dp.		Each
Single-Phase Input—100-240V AC Input Voltage







				Screw-Terminal Input and Output Connection

				3.3	2.64 to 3.96	60	198	120	0.98 @ 100V AC 0.95 @ 200V AC	68% @ 100V AC 71% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N11	0000000


				3.3	2.64 to 3.96	120	396	120	0.98 @ 100V AC 0.95 @ 200V AC	70% @ 100V AC 72% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N44	000000
				5	3.96 to 6	60	300	120	0.98 @ 100V AC 0.95 @ 200V AC	74% @ 100V AC 77% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N14	000000
				5	3.96 to 6	120	600	120	0.98 @ 100V AC 0.95 @ 200V AC	75% @ 100V AC 77% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N15	000000
				7.5	5.25 to 8.25	40	300	150	0.98 @ 100V AC 0.95 @ 200V AC	76% @ 100V AC 79% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N18	000000
				7.5	5.25 to 8.25	80	600	150	0.98 @ 100V AC 0.95 @ 200V AC	76% @ 100V AC 79% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N19	000000
				12	8.25 to 13.2	27	324	150	0.98 @ 100V AC 0.95 @ 200V AC	78% @ 100V AC 81% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N22	000000
				12	8.25 to 13.2	53	636	150	0.98 @ 100V AC 0.95 @ 200V AC	79% @ 100V AC 82% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N23	000000
				15	10.5 to 16.5	22	330	150	0.98 @ 100V AC 0.95 @ 200V AC	78% @ 100V AC 81% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N26	000000
				15	10.5 to 16.5	43	645	150	0.98 @ 100V AC 0.95 @ 200V AC	79% @ 100V AC 82% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N27	000000
				24	16.5 to 26.4	14	336	150	0.98 @ 100V AC 0.95 @ 200V AC	79% @ 100V AC 82% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N58	000000


				24	16.5 to 26.4	27	648	150	0.98 @ 100V AC 0.95 @ 200V AC	81% @ 100V AC 84% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N31	000000
				36	25.2 to 39.6	9	324	200	0.98 @ 100V AC 0.95 @ 200V AC	81% @ 100V AC 84% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N34	000000
				36	25.2 to 39.6	18	648	200	0.98 @ 100V AC 0.95 @ 200V AC	82% @ 100V AC 84% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N35	000000
				48	38.4 to 56	7	336	200	0.98 @ 100V AC 0.95 @ 200V AC	79% @ 100V AC 82% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	1.65"	4.02"	6.69"	6896N38	000000
				48	38.4 to 56	13	624	200	0.98 @ 100V AC 0.95 @ 200V AC	81% @ 100V AC 83% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	4.72"	7.48"	6896N39	000000




						Screw-Terminal Input and Quick-Disconnect-Terminal Output Connection

						3.3	2.64 to 3.96	200	660	120	0.98 @ 100V AC 0.95 @ 200V AC	74% @ 100V AC 76% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N12	000000


						3.3	2.64 to 3.96	300	990	120	0.98 @ 100V AC 0.95 @ 200V AC	72% @ 100V AC 75% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N13	00000000
						5	3.96 to 6	200	1,000	120	0.98 @ 100V AC 0.95 @ 200V AC	79% @ 100V AC 81% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N16	000000
						5	3.96 to 6	300	1,500	120	0.98 @ 100V AC 0.95 @ 200V AC	77% @ 100V AC 81% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N17	00000000
						7.5	5.25 to 8.25	134	1,005	150	0.98 @ 100V AC 0.95 @ 200V AC	80% @ 100V AC 83% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N2	000000
						7.5	5.25 to 8.25	200	1,500	150	0.98 @ 100V AC 0.95 @ 200V AC	81% @ 100V AC 83% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N21	00000000
						12	8.25 to 13.2	88	1,056	150	0.98 @ 100V AC 0.95 @ 200V AC	82% @ 100V AC 84% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N24	000000
						12	8.25 to 13.2	125	1,500	150	0.98 @ 100V AC 0.95 @ 200V AC	81% @ 100V AC 84% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N25	00000000
						15	10.5 to 16.5	70	1,050	150	0.98 @ 100V AC 0.95 @ 200V AC	82% @ 100V AC 84% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N28	000000
						15	10.5 to 16.5	100	1,500	150	0.98 @ 100V AC 0.95 @ 200V AC	83% @ 100V AC 86% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N29	00000000
						24	16.5 to 26.4	44	1,056	150	0.98 @ 100V AC 0.95 @ 200V AC	84% @ 100V AC 86% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N32	000000


						24	16.5 to 26.4	65	1,680	150	0.98 @ 100V AC 0.95 @ 200V AC	84% @ 100V AC 87% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N33	00000000
						36	25.2 to 39.6	29	1,044	200	0.98 @ 100V AC 0.95 @ 200V AC	84% @ 100V AC 86% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N36	000000
						36	25.2 to 39.6	42	1,692	200	0.98 @ 100V AC 0.95 @ 200V AC	84% @ 100V AC 87% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N37	00000000
						48	38.4 to 56	22	1,056	200	0.98 @ 100V AC 0.95 @ 200V AC	84% @ 100V AC 86% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	5.91"	9.45"	6896N4	000000
						48	38.4 to 56	32	1,680	200	0.98 @ 100V AC 0.95 @ 200V AC	84% @ 100V AC 87% @ 200V AC	8-Pin JST Automotive 10-Pin JST Automotive	2.4"	7.01"	10.55"	6896N41	00000000

Molex Sockets


8-Pin JST Automotive Connection	10-Pin JST Automotive Connection

To use the remote features of these power supplies, you’ll need a wire connector.

8-Pin JST Automotive Connection—8-pin JST automotive connectors enable remote on/off, voltage sensing, and signaling functionality using the power supply’s auxiliary power output.

10-Pin JST Automotive Connection—10-pin JST automotive connectors only add remote on/off and voltage sensing functionality. They require an external power source, such as a battery or another power supply.

	Aux. Output
Electrical Connection	Voltage, V DC	Current, amp	Lg.	Output Features		Each
8-Pin JST Automotive	12	1	19 5/8"	Remote On/Off, Remote Signaling, Remote Voltage Sensing	6896N43	00000
10-Pin JST Automotive	—	—	19 5/8"	Remote On/Off, Remote Voltage Sensing	6896N42	0000

Rack-Mount Power Supplies

With Digital Display

With Analog Display

Mount these power supplies into standard 19”-wide electronics racks, which can hold multiple electronic devices and keep your benchtop clear. These power supplies change AC voltage to DC voltage to power highly sensitive audio, measuring, and testing devices while keeping electronic interference—known as output or ripple noise—from passing on to the device. The lower the output noise value, the less interference the power supplies will create.

Designed with linear voltage regulation, these power supplies produce the same voltage regardless of changes in the input voltage or the amount of current being drawn. They are also known as linear power supplies. As they send power to a device, they use remote voltage sensing to check for any drops in the voltage. If the voltage dips, they can compensate with extra power, so connected devices always receive the correct voltage.

If you exceed the maximum current or load, these power supplies will shut down to protect both the power supply and the connected device.

View the output on a digital or analog display.

Digital Display—Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

Analog Display—Analog displays are better than digital displays for monitoring fast output changes, such as dips and spikes.

		Output												Mounting
	Display Type	No. of Power Connections	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Ht.	Wd.	Dp.	Electrical Protection Type	Output Connection Location	Output Features	Fasteners Included	Number of Holes		Each
Single-Phase Input—120, 240V AC Input Voltage



		Digital	1	Standard Banana Socket	0V DC to 20V DC	0 amp to 25 amp	0 W to 500 W	8 mV DC	5.8"	19"	12.8"	Overcurrent, Overload	Front	Constant Current, Constant Voltage, Remote Voltage Sensing	No	4	7686K41	0000000


		Analog	1	Standard Banana Socket	0V DC to 30V DC	0 amp to 12 amp	0 W to 360 W	8 mV DC	5.8"	19"	13.5"	Overcurrent, Overload	Front	Constant Current, Constant Voltage, Remote Voltage Sensing	No	4	7686K28	000000

Junction-Box-Mount Power Supplies

Convert AC voltage to DC voltage without plugging a bulky adapter into your outlet. These power supplies come mounted onto a cover that fits a standard junction box, also known as an outlet box. They wire to your building's electricity with wire leads and screw terminals. They're often used to power building automation systems such as automatic doors, sinks, and lights.

These power supplies use switching regulation, so they put out the stated voltage despite fluctuations in your outlet’s power and the power being drawn by your device. It also means they won’t get too hot. Their overvoltage protection shields the power supply and connected load from damage if you exceed the maximum voltage.

UL and C-UL listed, these power supplies meet U.S. and Canadian safety standards. They also have an LPS output, which means they meet international standards for safe, low-voltage output. With a Class II shock protection, they have two levels of insulation.

These power supplies meet U.S. Department of Energy standards for energy efficiency when both in-use and in standby mode.

Efficiency @ Voltage—Efficiency describes how good a power supply is at converting the AC power it draws from your main electrical supply into DC power. The higher the efficiency score, the less money it will cost to run and the less heat it will produce.

	Output								Housing			Cover
	No. of Power Connections	Voltage	Current	Power	Max. Noise Peak-to-Peak	Power Factor @ Voltage	Efficiency @ Voltage	Low-Voltage Output Protection	Ht.	Wd.	Dp.	Ht.	Wd.	Dp.	Certification	Electrical Protection Type	External Power Supply Efficiency Std.		Each
Single-Phase Input—100V AC to 240V AC Input Voltage







				Wire Leads Input and Screw-Clamp Terminal Output Connection

				1	12V DC	1.5 amp	18 W	150 mV DC	Not Rated	85% @ 115V AC	LPS	3"	1.9"	1.2"	4"	4"	0.1"	UL Listed C-UL Listed	Overvoltage	DoE Level VI	5594N11	000000


				1	24V DC	0.75 amp	18 W	200 mV DC	Not Rated	85% @ 115V AC	LPS	3"	1.9"	1.2"	4"	4"	0.1"	UL Listed C-UL Listed	Overvoltage	DoE Level VI	5594N12	00000

AC to DC Electromagnet Transformers


	NEMA 5-15 Plug

Flip the switch to reverse the magnetic current and release your electromagnet's hold. Choose an output power wattage equal to or greater than the watts of your electromagnet. These transformers are rated NEMA 12 for protection from oil/coolant dripping.

		Output						Mounting
	Input Voltage, V AC	Voltage, V DC	Power, W	Input No. of Blades (NEMA Type)	Ht.	Wd.	Dp.	Number of Holes	Hole Diameter	Fasteners Included	Housing Material	Max. Temp., ° F		Each
Single-Phase Input—Plug Input and Wire Leads Output Connection







				Step-Down Voltage

				120	12	48	3-Blade (NEMA 5-15)	3 1/2"	6"	4"	4	9/32"	No	Steel	140	57245K75	0000000


				120	24	48	3-Blade (NEMA 5-15)	3 1/2"	6"	4"	4	9/32"	No	Steel	140	57245K85	000000
				120	110	800	3-Blade (NEMA 5-15)	3 1/2"	6"	4"	4	9/32"	No	Steel	140	57245K96	000000

AS-Interface-Network DIN-Rail-Mount Power Supplies

Send both electrical and data signals to equipment on AS-interface networks. These power supplies briefly boost power to 150% of their maximum operating current for starting motors, actuating solenoid valves, and other applications that require a higher starting current than their operating current. All of this means you get a more powerful power supply in a compact size.

Mount these power supplies to a DIN rail in your industrial cabinet or electrical panel. To monitor sudden voltage drops, wire them to a panel light or alarm, or connect them to a PLC (Programmable Logic Controller).

All of these power supplies use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. They’re also SEMI F47 compliant, so they meet standards for maintaining output voltage when input voltage dips. This is commonly known as voltage sag immunity. If you exceed the maximum voltage, temperature, or load, they protect both the power supply and the connected equipment. These power supplies also meet the voltage requirements for use in a SELV (separated extra low voltage) circuit.

Rated IP20, they prevent your fingers from touching internal components and accidentally shocking yourself. They're also UL and C-UL listed, UL recognized, and CE marked so you know they meet stringent safety standards.

	Output
	No. of Power Connections	Voltage	Voltage Adjustment Range, V DC	Current	Peak Current, amp	Peak Current Duration, sec.	Power	Max. Noise Peak-to-Peak	Power Factor @ Voltage	Efficiency @ Voltage	For Extra-Low Voltage Circuit Type	Enclosure Rating	Ht.	Wd.	Dp.	Certification	Specs. Met	Electrical Protection Type		Each
Three-Phase Input—360V AC to 500V AC Input Voltage







				Spring-Clamp-Terminal Input and Output Connection

				2	30.5V DC	30 to 32	4.8 amp	7.2	5	144 W	20 mV DC	0.61 @ 400V AC	92.5% @ 400V AC 91.8% @ 480V AC	SELV	IP20	5.63"	1.97"	5.63"	AS-International Association Certified UL Listed C-UL Listed C-UL Recognized Component CE Marked UL Recognized Component	SEMI F47	Over Temperature, Overload, Overvoltage	5603N11	0000000

EMI Filtering IEC Connectors with Integrated Power Supply

Change AC voltage to DC voltage and bring power to electronic devices while protecting them from harmful electromagnetic interference (EMI). Even with their built-in power supply, these connectors have the same overall footprint as those without a power supply. All are for use with standard IEC power cords. Commonly used to convey power from wall outlets, you won’t have to wire your devices to an external power source. Instead, wire these connectors into your device with the terminals on the back of each connector.

For fast wire connections, these connectors have quick-disconnect terminals. The terminals slide together with the quick-disconnect terminals on your wiring and are easily disconnected by hand, but still provide a strong hold.

All of these connectors use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. If you exceed the maximum voltage or load, the connectors will shut down to protect both the power supply and the connected device. They also meet the voltage requirements for use in a SELV (separated extra low voltage) circuit.

These connectors meet U.S. and international standards for safety. They also meet UL 94 V-0, which means they self-extinguish within 10 seconds if they catch fire, and won’t spread the fire by dripping. All have Class I shock protection—they're insulated and have a protective ground to prevent electrical shocks.

Screw-On Male Receptacles

Image of Product. Front orientation. Power Supplies. EMI Filtering IEC Connectors with Integrated Power Supply.

Quick-Disconnect

Terminals

IEC C14

Maximum Output Noise Peak-to-Peak—Maximum output noise is also known as ripple noise. When power supplies convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this noise won't affect most applications, it can interfere with other signals in extremely sensitive audio equipment and high-precision measuring and testing equipment. The lower the output noise, the less interference it creates.

		Output						For Panel Cutout
	IEC Connector Type	Voltage, V DC	Current, amp	Power, W	Max. Noise Peak-to-Peak, mV DC	Power Factor @ Voltage	Efficiency @ Voltage	Ht.	Wd.	Temp., ° F	Electrical Protection Type		Each
Single-Phase Input—100-240V AC Input Voltage



		C14	3.3	1.51	5	60	0.6 @ 115V AC 0.45 @ 230V AC	76% @ 230V AC	0.9"	1.2"	-10 to 140	Overcurrent, Overload, Overvoltage	6260N171	000000


		C14	5	1	5	60	0.6 @ 115V AC 0.45 @ 230V AC	80% @ 230V AC	0.9"	1.2"	-10 to 140	Overcurrent, Overload, Overvoltage	6260N172	00000
		C14	12	0.42	5	60	0.6 @ 115V AC 0.45 @ 230V AC	81% @ 230V AC	0.9"	1.2"	-10 to 140	Overcurrent, Overload, Overvoltage	6260N173	00000
		C14	15	0.333	5	60	0.6 @ 115V AC 0.45 @ 230V AC	81% @ 230V AC	0.9"	1.2"	-10 to 140	Overcurrent, Overload, Overvoltage	6260N174	00000
		C14	24	0.21	5	60	0.6 @ 115V AC 0.45 @ 230V AC	84% @ 230V AC	0.9"	1.2"	-10 to 140	Overcurrent, Overload, Overvoltage	6260N175	00000

Open-Frame Power Supplies


30 Watts Output Power	100 Watts Output Power

Convert AC to DC voltage to power equipment in tight spaces—since these power supplies don’t have an enclosure, you can use them inside devices where enclosed power supplies can’t fit. The open construction lets heat out, so they also run cooler than standard power supplies with the same output. However, since they are not enclosed, these power supplies can shock you if you touch their components. They are best for devices with sealed housings, and should not be used in enclosures that are opened frequently.

These use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system. It also means they won’t get too hot.

The combination of power factor and efficiency gives you a sense for how efficiently these draw AC power and convert it into DC power, which ultimately affects your operating cost. The closer the power factor is to 1, and the higher the efficiency percentage, the lower the operating cost. The more efficient your power supply, the cooler it runs too.

These power supplies meet U.S. and international safety standards. If you exceed the maximum current, load, or voltage, they’ll shut down to protect both the power supply and the connected equipment.

	Output
	No. of Power Connections	Voltage	Current	Power	Max. Noise Peak-to-Peak	Power Factor @ Voltage	Efficiency @ Voltage	For Extra-Low Voltage Circuit Type	Ht.	Wd.	Dp.	Certification	Electrical Protection Type	No. of Mounting Holes		Each
Single-Phase Input—100V AC to 240V AC Input Voltage







				Wire Leads Input and Output Connection

				1	12V DC	2.5 amp	30 W	360 mV DC	Not Rated	85% @ 100V AC 88% @ 230V AC	SELV	1.1"	2"	3.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	Overcurrent, Overload, Overvoltage	2	6895N1	000000


				1	12V DC	8.5 amp	100 W	400 mV DC	0.97 @ 100V AC 0.87 @ 230V AC	87% @ 100V AC 89% @ 230V AC	SELV	1.1"	2.4"	6.1"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	Overcurrent, Overload, Overvoltage	4	6895N3	00000
				1	24V DC	1.3 amp	30 W	360 mV DC	Not Rated	87% @ 100V AC 90% @ 230V AC	SELV	1.1"	2"	3.5"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	Overcurrent, Overload, Overvoltage	2	6895N2	00000
				1	24V DC	4.3 amp	100 W	600 mV DC	0.97 @ 100V AC 0.87 @ 230V AC	86% @ 100V AC 89% @ 230V AC	SELV	1.1"	2.4"	6.1"	C-UL Recognized Component CE Marked D Marked UL Recognized Component	Overcurrent, Overload, Overvoltage	4	6895N4	00000

Status-Indicating DIN-Rail-Mount Power Supplies

Monitor voltage, current, remaining life, and other maintenance data from your PC, PLC, or by glancing at the digital display. There's no need to inspect these power supplies with multimeters or other test equipment. They also connect to your network, so you can view and analyze data remotely. Like other power supplies, they convert AC to DC voltage to power electronic equipment. Mount these power supplies onto DIN rails, which are commonly found inside industrial cabinets and electrical panels. All have spring-clamp wire terminals for quick connections that hold firmer than screw-style terminals.

Download the free software to view readings, save historical data, and analyze performance over time. Having all of your data in one place means you can troubleshoot and create predictive maintenance plans without needing to walk the floor and open enclosures to perform inspections. Saving historical data reduces maintenance costs because you can better predict when equipment should be replaced. Set alarm conditions, so you're alerted if a particular reading is too high or low. All power supplies are compatible with common Ethernet communication standards—check on them from anywhere without additional measuring equipment or sensors.

If you exceed the maximum voltage, temperature, or load, these power supplies protect both the power supply and the connected equipment. They also meet the voltage requirements for use in a PELV (protected extra low voltage) circuit.

Rated IP20, these power supplies prevent your fingers from touching internal components and accidentally shocking yourself. They're UL and C-UL Listed, TUV Rheinland Certified, and CE Marked so you know they meet stringent safety standards. With an NEC Class 2 and LPS output, if something fails inside the power supply, these limit the risk of electrical shock.

	Output
	Voltage, V DC	Voltage Adjustment Range, V DC	Current, amp	Peak Current, amp	Peak Current Duration, sec.	Power, W	Max. Noise Peak-to-Peak, mV DC	Power Factor @ Voltage	Efficiency @ Voltage	Max. Transmission Distance, ft.	Ht.	Wd.	Dp.	Certification	Specs. Met		Each
Single-Phase Input—100-240V AC Input Voltage







				Spring-Clamp-Terminal Input and Output Connection

				24	21.6 to 28	5	6	3	120	150	0.9 @ 230V AC	90% @ 115V AC 92% @ 230V AC	325	3.54"	2.17"	3.48"	UL Listed C-UL Listed CE Marked TUV Rheinland Certified	SEMI F47	5553N44	0000000


				24	21.6 to 28	10	15	3	240	140	0.9 @ 230V AC	91% @ 115V AC 93% @ 230V AC	325	4.93"	1.5"	4.7"	UL Listed C-UL Listed CE Marked TUV Rheinland Certified	SEMI F47	5553N55	000000
				24	21.6 to 28	20	30	3	480	130	0.9 @ 230V AC	92% @ 115V AC 94% @ 230V AC	325	4.93"	2.36"	4.7"	UL Listed C-UL Listed CE Marked TUV Rheinland Certified	SEMI F47	5553N66	000000
				24	23 to 24.1	3.75	—	—	90	300	Not Rated	86% @ 115V AC 87% @ 230V AC	325	3.54"	2.17"	3.48"	UL Listed C-UL Listed CE Marked TUV Rheinland Certified	SEMI F47	5553N33	000000

Fixed-Voltage Bench-Mount Power Supplies


	Stud Terminal on Back

No need to adjust the voltage on these power supplies—they’re specifically designed to convert 120V AC to 13.8V DC. This voltage is common in radio transmitters, battery chargers, and automotive electrical systems, so these power supplies are often used to develop and test electronics that will be used in those applications. Since they are not adjustable, there’s no risk of supplying the wrong voltage and damaging your equipment. Power supplies have a stud terminal output connection to work with wire leads. Wrap the wire around the stud and secure with the included nuts, or attach alligator clips to the studs.

These power supplies have linear voltage regulation, which means they produce the same voltage regardless of changes in the input voltage or the amount of current being drawn. They are also known as linear power supplies. They have extremely low noise output, meaning that they keep electronic interference (also known as output noise or ripple noise) from being passed on to your device. However, these power supplies are larger, use more energy, and give off more heat than switching power supplies with a similar output.

If you exceed the maximum load or current, they’ll shut down to protect both the power supply and the connected equipment.

Overvoltage—Power supplies with overvoltage protection will also shut down if you exceed the maximum voltage.

	Output
	No. of Power Connections	Voltage	Current	Power	Max. Noise Peak-to-Peak	Ht.	Wd.	Dp.	Electrical Protection Type	Output Connection Location	Output Features		Each
Single-Phase Input—120V AC Input Voltage







				Stud-Terminal Output Connection

				1	13.8V DC	25 amp	331.2 W	16 mV DC	6.8"	6.3"	10.3"	Overcurrent, Overload, Overvoltage	Back	Constant Voltage	5770N18	0000000


				1	13.8V DC	40 amp	532.3 W	30 mV DC	6.8"	10.5"	11.5"	Overcurrent, Overload, Overvoltage	Back	Constant Voltage	5770N2	000000
				1	13.8V DC	60 amp	780.5 W	28 mV DC	6.8"	10.5"	11.5"	Overcurrent, Overload, Overvoltage	Back	Constant Voltage	5770N22	000000