Filter by
Material
Voltage
Overall Length
Insertion Heater Wattage
Wattage
REACH
RoHS
DFARS Specialty Metals
Export Control Classification Number (ECCN)
For Filament Guide Thread Length
For Nozzle Thread Length
Insertion Heater Orientation
Electrical Connection
Insertion Heater Connection
Filament Guide Material
Temperature Sensor Connection
Length
Thread Length
Filament Diameter
For Extrusion Type
Assembly
Heating Blocks for 3D Printer Extruder Heating Elements
 |  |
Mosquito |
Replace damaged heating elements in your 3D printer, or switch them out to print at a faster speed or higher temperature. Also known as hotends, these heating elements receive filament from an extruder, melt it, and then pass it through a nozzle onto the part being printed. They are compatible with most fused filament fabrication (FFF) 3D printers. Changes to the heating element or temperature cartridge will also require a software update, or your printer may overheat. Made of metal, heating blocks disperse heat from an insertion heater to evenly melt filament as it passes through. They also hold the temperature sensor and join the filament guide to the nozzle, making them an important connection point between parts of the heating element.
Nickel-Plated Copper—Nickel-plated copper heating blocks conduct more heat and hold up to higher temperatures than aluminum. Use them with Mosquito heating elements.
For Nozzle Thread | For Insertion Heater | For Filament Guide Thread | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Nozzle Opening Dia., mm | Lg., mm | Size | Max. Temp. | Cartridge Dia., mm | Orientation | For Temp. Sensor Cartridge Dia., mm | Lg., mm | Size | Material | Mounting Fasteners Included | Each | |||
Mosquito | ||||||||||||||
| 0.2, 0.3, 0.4, 0.6, 0.8 | 7 | M6 × 1 mm | 450° C 842° F | 6 | Perpendicular to Nozzle | 3 | 4 | M6 × 1 mm | Nickel-Plated Copper | No | 3714N39 | 000000 | ||
3D Printer Extruder Heating Elements
|  |
Mosquito |
Replace damaged heating elements in your 3D printer, or switch them out to print at a faster speed or higher temperature. Also known as hotends, these heating elements receive filament from an extruder, melt it, and then pass it through a nozzle onto the part being printed. They are compatible with most fused filament fabrication (FFF) 3D printers. Changes to the heating element or temperature cartridge will also require a software update, or your printer may overheat.
Select a heating element with a voltage and extrusion type that match your printer.
Mosquito—For printing high-temperature filaments, such as PEEK and Ultem PEI, use Mosquito heating elements. They reach temperatures up to 149° C or 300° F higher than V6 or Volcano styles, so you can melt a wider variety of materials. These heating elements come with everything you need, and are partially assembled—you’ll need to connect the insertion heater and temperature sensor.
For Direct Feed Extrusions—In printers with a direct feed, the extruder is attached to the heating element, feeding filament directly into it.
24V DC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Extrusion Type | For Filament Dia., mm | Nozzle Opening Dia., mm | Max. Temp. | Insertion Heater Wattage, W | Heating Block Material | Includes | Pkg. Qty. | Each | |||
Mosquito | |||||||||||
| Direct Feed | 1.75 | 0.4 | 500° C 932° F | 50 | Nickel-Plated Copper | Boron Nitride Paste, One 1-m Lg. Quick-Disconnect Cable for Fan (Molex Female 2 Pin × Standard Male 2 Pin), Three Hex L-Keys | 1 | 3714N44 | 0000000 | ||
Filament Guides for 3D Printer Extruder Heating Elements
 |
Filament Guide for Mosquito Heating Element |
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
For Filament Dia., mm | Overall Lg., mm | Lg., mm | Size | Material | Each | |||
Mosquito | ||||||||
| 1.75 | 30 | 4 | M6 × 1 mm | Copper, Stainless Steel | 3714N41 | 000000 | ||
