Filter by
Manufacturer
Manufacturer Model Number
Clarity
Color
Container Type
Mix Ratio
Elongation
Formulation
Adhesive Type
Consistency
Type
Minimum Temperature
Fitting Connection
Material
Mixing Required
Begins to Harden
Manufacturer Model Name
Maximum Temperature
Cure Type
Peel Strength
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Optically Clear Epoxy Structural Adhesives
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These have two parts that must be mixed. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100 Plus, DP105, and epoxy in 4.5-oz. tubes bond dissimilar materials.
3M Scotch-Weld Adhesives
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
| DP100 Plus | 1.64 | Cartridge | 3 min. | 48 hrs. | 1,700 | 13 | 1:1 | Thick Liquid (8,750 cP) | -65 to 300° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 000000 |
Mixer Nozzles, Plungers, and Dispensing Guns
| Each | ||
| Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
| Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
| Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
| Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
| Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |