Filter by
Manufacturer
Manufacturer Model Number
Container Type
Peel Strength
Shear Strength
Container Size
Formulation
Consistency
Type
Mixing Required
Adhesive Type
Begins to Harden
REACH
Manufacturer Model Name
Maximum Temperature
Cure Type
Viscosity
Color
Approximate Linear Coverage @ Bead Diameter
Fitting Connection
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Mix Ratio
About Structural Adhesives
More
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These have two parts that must be mixed. The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.
3M Scotch-Weld Adhesives
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| DP460NS | 1.69 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
| DP460NS | 6.76 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
| DP460NS | 13.5 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
Mixer Nozzles, Plungers, and Dispensing Guns
| Each | ||
| Mixer Nozzle for 1.69 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
| Mixer Nozzle for 1.69 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
| Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. 3M Cartridges | 0000000 | 0000 |
| Replacement Plunger for 1.69 fl. oz. 3M Cartridges | 0000000 | 00000 |
| Dispensing Gun for 1.69 fl. oz. 3M Cartridges | 0000000 | 000000 |
| Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
| Air-Powered Dispensing Gun for 1.69 fl. oz. 3M Cartridges | 0000000 | 000000 |