About Structural Adhesives
More
About Paint and Protective Coatings
More
3M Two-Part Adhesive Dispensing Guns
Use these guns to dispense two-part adhesives. Use them only with 3M dual cartridges.
The gun for 6.76-oz. and 13.5-oz. cartridges is suitable for high-volume applications.
Air-Powered 3M Two-Part Adhesive Dispensing Guns
Mixer Nozzles for Two-Part Adhesive Cartridges
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
A taper tip has a small opening for controlled dispensing.
A step tip allows you to trim the opening to the diameter you need.
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
DP125, 14255, and 14251 form flexible bonds.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP110 | 1.64 | Cartridge | 8 min. | 48 hrs. | 1,500 | 20 | 1:1 | Thick Liquid (50,000 cP) | -65° to 350° | Clear | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 000000 |
DP110 | 1.64 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP110 | 6.76 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP125 | 1.64 | Cartridge | 15 min. | 7 days | 1,900 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber | 0000000 | 00000 |
DP125 | 1.64 | Cartridge | 20 min. | 7 days | 1,500 | 35 | 1:1 | Thick Liquid (16,250 cP) | -65° to 300° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
DP190 | 1.64 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
DP190 | 6.76 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 00000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76 fl. oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP405 | 1.69 | Cartridge | 3 min. | 7 days | 2,260 | 40 | 2:1 | Thick Liquid (9,500 cP) | -65° to 350° | Black | Metal, Plastic, Rubber | 00000000 | 000000 |
DP420 | 1.69 | Cartridge | 20 min. | 24 hrs. | 280 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 00000 |
DP420 | 1.69 | Cartridge | 20 min. | 24 hrs. | 400 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 0000000 | 00000 |
DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 280 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 400 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP420 | 13.5 | Cartridge | 20 min. | 24 hrs. | 280 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
DP420 | 13.5 | Cartridge | 20 min. | 24 hrs. | 400 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP420NS | 1.69 | Cartridge | 20 min. | 24 hrs. | 470 | 50 | 2:1 | Paste (180,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 00000 |
DP420NS | 6.76 | Cartridge | 20 min. | 24 hrs. | 470 | 50 | 2:1 | Paste (180,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP420NS | 13.5 | Cartridge | 20 min. | 24 hrs. | 470 | 50 | 2:1 | Paste (180,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP460 | 1.69 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 00000 |
DP460 | 6.76 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
DP460 | 13.5 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
DP460NS | 1.69 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 00000 |
DP460NS | 6.76 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
DP460NS | 13.5 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
Each | ||
Mixer Nozzle for 1.69 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.69 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.69 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.69 fl. oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.69 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100NS is nonsagging, so it won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP100 | 1.64 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
DP100 | 6.76 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
DP100NS | 1.64 | Cartridge | 5 min. | 48 hrs. | 840 | 2 | 1:1 | Paste (93,750 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76 fl. oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Optically Clear Epoxy Structural Adhesives
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100 Plus, DP105, and epoxy in 4.5-oz. tubes bond dissimilar materials.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
DP100 Plus | 1.64 | Cartridge | 3 min. | 48 hrs. | 1,700 | 13 | 1:1 | Thick Liquid (8,750 cP) | -65 to 300° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 000000 |
DP105 | 1.64 | Cartridge | 4 min. | 48 hrs. | 1,300 | 35 | 1:1 | Thick Liquid (7,500 cP) | -65 to 300° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
DP190 | 1.64 fl. oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | Metal, Plastic, Rubber, Masonry | 0000000 | 000000 |
DP190 | 6.76 fl. oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76-oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 00000000 |
Flame-Retardant Epoxy Structural Adhesives
These self-extinguishing epoxies meet UL 94 V-0 for flame retardance. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
DP100FR | 1.64 | Cartridge | 5 min. | 48 hrs. | 1,100 | 2 | 1:1 | Thick Liquid (73,750 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | Each | 00000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | Each | 0000 |
Dispensing Gun for 1.64 fl. oz. Cartridges | 0000000 | Each | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 00000000 |
High-Strength Urethane Structural Adhesives
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives. Urethanes are the most flexible adhesives, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP620NS | 1.64 | Cartridge | 20 min. | 48 hrs. | 1,700 | 30 | 1:1 | Thick Liquid (4,360 cP) | -60° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites, Wood | 00000000 | 000000 |
DP640 | 1.64 | Cartridge | 40 min. | 7 days | 1,960 | 64 | 1:1 | Thick Liquid (30,000 cP) | -65° to 250° | Brown | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Use 1.64 fl. oz. and 1.69 fl. oz. cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.DP604NS and DP605NS stay flexible at low temperatures.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP604NS | 1.64 | Cartridge | 4 min. | 6 hrs. | 660 | 33 | 1:1 | Thick Liquid (1,950 cP) | -60° to 250° | Black | Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites, Wood | 0000000 | 000000 |
DP605NS | 1.64 | Cartridge | 5 min. | 48 hrs. | 660 | 33 | 1:1 | Paste (150,000 cP) | -65° to 250° | Off-White | Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites, Wood | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
High-Strength Acrylic Structural Adhesives
With excellent shear strength, these acrylics form stronger bonds than our standard acrylic structural adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP8407NS and DP8410NS are nonsagging, so they won't drip from vertical or overhead surfaces. They contain 0.01" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
DP8407NS | 1.52 | Cartridge | 7 min. | 24 hrs. | 4,500 | 50 | 10:1 | Thick Liquid (20,000 cP) | -40° to 400° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP805 | 1.64 | Cartridge | 3 min. | 24 hrs. | 2,800 | 35 | 1:1 | Paste (112,500 cP) | -40° to 180° | Off-White | Metal, Plastic, Rubber, Composites, Wood | 0000000 | 000000 |
DP810 | 1.64 | Cartridge | 10 min. | 24 hrs. | 3,400 | 30 | 1:1 | Thick Liquid (20,000 cP) | -40° to 180° | Beige | Metal, Plastic, Rubber, Composites, Wood | 00000000 | 00000 |
DP810NS | 1.64 | Cartridge | 10 min. | 24 hrs. | 3,400 | 23 | 1:1 | Paste (95,000 cP) | -40° to 180° | Beige | Metal, Plastic, Rubber, Composites, Wood | 00000000 | 00000 |
DP820 | 1.64 | Cartridge | 15 min. | 48 hrs. | 2,500 | 22 | 1:1 | Thick Liquid (57,500 cP) | -40° to 180° | Off-White | Metal, Plastic, Rubber, Composites, Wood | 0000000 | 00000 |
Each | ||
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 0000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Acrylic Structural Adhesives for Hard-to-Bond Materials
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP8005 contains 0.008" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.
DP8010 is moisture and corrosion resistant.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,275 | 9 | 10:1 | Thick Liquid (24,550 cP) | -65° to 200° | Black | Plastic | 00000000 | 000000 |
DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,500 | 17 | 10:1 | Thick Liquid (25,460 cP) | -65° to 200° | Off-White | Plastic | 00000000 | 00000 |
DP8010 | 1.52 | Cartridge | 10 min. | 24 hrs. | 2,700 | Not Rated | 10:1 | Thick Liquid (20,000 cP) | -40° to 200° | Blue | Plastic | 0000000 | 00000 |
Epoxy Potting Compounds
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Choose a Color | Each | |
3M Compounds—Extra Hard | ||||||||||||
DP270 | 6.8 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 000000 |