3M Hot-Melt Glue Guns
Dispense 3M hot-melt adhesives with these guns. Guns include one tip.
Additional tips are not compatible with model AE II.
For Glue Stick | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | Dia. | Lg. | For 3M Glue Stick Model No. | Wattage, W | Voltage | Temp. Setting, °F | Adhesive Output, lbs./hr. | Duty Cycle | Warm-Up Time, min. | Cord Lg., ft. | Includes | Each | |
| AE II | 1/2" | 10" | 3750 | 200 | 120V AC | 380° | 3 | Continuous | 6 | 6 | 3/32" Diameter Tip | 0000000 | 0000000 |
| TC/TC-Q LT | 5/8" | 2" | 3762LM, 3792LM | 150 | 150V AC | 265° | 3.5 | Continuous | 10 | 8 | 3/32" Diameter Tip | 0000000 | 000000 |
 Cone |  L |
 T |
Use L-tips to close full-overlap cartons.
T-tips dispense two lines of glue to close slotted cartons.
Tips are not compatible with model AE II glue guns.
Nozzles for 3M Hot-Melt Glue Guns
Cone | L |
T |
Use L-tips to close full-overlap cartons.
T-tips dispense two lines of glue to close slotted cartons.
Tips are not compatible with model AE II glue guns.
Electric/Air-Powered 3M Hot-Melt Glue Guns
For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing. Load up to three glue sticks at once. The gun includes one tip; additional tips are sold separately. Use only with 3M glue sticks.
For Glue Stick | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model No. | Dia. | Lg. | For 3M Glue Stick Model No. | Wattage, W | Voltage | Temp. Setting, °F | Adhesive Output, lbs./hr. | Duty Cycle | Warm-Up Time, min. | Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | Air Hose Lg., ft. | Cord Lg., ft. | Each | |
| II | 1" | 3" | 3738, 3762 | 500 | 120V AC | 385° | 7.5 | Continuous | 15 | 50-80 | 1/8 | NPT | Male | 8 | 8 | 00000000 | 000000000 |
3M Two-Part Adhesive Dispensing Guns
Use these guns to dispense two-part adhesives. Use them only with 3M dual cartridges.
The gun for 6.76-oz. and 13.5-oz. cartridges is suitable for high-volume applications.
Air-Powered 3M Two-Part Adhesive Dispensing Guns
Mixer Nozzles for Two-Part Adhesive Cartridges
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
A taper tip has a small opening for controlled dispensing.
A step tip allows you to trim the opening to the diameter you need.
