Filter by
Manufacturer
Formulation
Manufacturer Model Name
For Joining
For Use On
Manufacturer Model Number
Container Size
Consistency
Maximum Temperature
Type
Clarity
Adhesive Type
Shear Strength
Cure Type
Peel Strength
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Epoxy Structural Adhesives
 |  |
Can | Cartridge |
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Specifications Met | For Joining | Each | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| DP190 | 1.64 | Cartridge | 60 | 14 day | 850 | 20 | 1:1 | Thick Liquid | 8,000 | -65 to 350 | — | Masonry, Metal, Plastic, Rubber | 7467A72 | 000000 | ||
| DP190 | 6.76 | Cartridge | 60 | 14 day | 850 | 20 | 1:1 | Thick Liquid | 8,000 | -65 to 350 | — | Masonry, Metal, Plastic, Rubber | 7467A122 | 000000 | ||
| DP110 | 1.64 | Cartridge | 8 | 48 hr. | 1,500 | 20 | 1:1 | Thick Liquid | 50,000 | -65 to 350 | — | Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber | 7467A22 | 00000 | ||
| DP110 | 1.64 | Cartridge | 8 | 48 hr. | 2,500 | 20 | 1:1 | Thick Liquid | 65,000 | -65 to 350 | — | Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber | 7467A23 | 00000 | ||
| DP110 | 6.76 | Cartridge | 8 | 48 hr. | 2,500 | 20 | 1:1 | Thick Liquid | 65,000 | -65 to 350 | — | Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber | 7467A96 | 000000 | ||
| DP125 | 1.64 | Cartridge | 15 | 7 day | 1,900 | 35 | 1:1 | Thick Liquid | 55,000 | -65 to 300 | — | Metal, Plastic, Rubber | 7467A65 | 00000 | ||
| DP125 | 1.64 | Cartridge | 20 | 7 day | 1,500 | 35 | 1:1 | Thick Liquid | 16,250 | -65 to 300 | — | Metal, Plastic, Rubber | 7467A68 | 00000 | ||
| 1838 | 57.6 | Can | 60 | 7 day | 2,000 | 4 | 4:5 | Paste | 492,500 | -65 to 350 | ASTM E595, MIL-A-52194 | Composite, Glass, Metal, Plastic, Rubber, Wood | 75065A71 | 000000 | ||
| 1838L | 64 | Can | 60 | 7 day | 2,000 | 4 | 1:1 | Thick Liquid | 11,000 | -65 to 350 | — | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75065A74 | 000000 | ||
Impact-Resistant Epoxy Structural Adhesives
|
Cartridge |
Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration better than standard epoxies. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
3M | |||||||||||||||
Scotch-Weld | |||||||||||||||
| DP405 | 1.69 | Cartridge | 3 | 7 day | 2,260 | 40 | 2:1 | Thick Liquid | 9,500 | -65 to 350 | Metal, Plastic, Rubber | 7467A211 | 000000 | ||
| DP420 | 1.69 | Cartridge | 20 | 24 hr. | 280 | 50 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A25 | 00000 | ||
| DP420 | 1.69 | Cartridge | 20 | 24 hr. | 400 | 50 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A51 | 00000 | ||
| DP420 | 6.76 | Cartridge | 20 | 24 hr. | 280 | 50 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A99 | 000000 | ||
| DP420 | 6.76 | Cartridge | 20 | 24 hr. | 400 | 50 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A411 | 000000 | ||
| DP420 | 13.5 | Cartridge | 20 | 24 hr. | 280 | 50 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A413 | 000000 | ||
| DP420 | 13.5 | Cartridge | 20 | 24 hr. | 400 | 50 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A412 | 000000 | ||
| DP420NS | 1.69 | Cartridge | 20 | 24 hr. | 470 | 50 | 2:1 | Paste | 180,000 | -65 to 350 | Composite, Metal, Plastic | 7467A216 | 00000 | ||
| DP420NS | 6.76 | Cartridge | 20 | 24 hr. | 470 | 50 | 2:1 | Paste | 180,000 | -65 to 350 | Composite, Metal, Plastic | 7467A414 | 000000 | ||
| DP420NS | 13.5 | Cartridge | 20 | 24 hr. | 470 | 50 | 2:1 | Paste | 180,000 | -65 to 350 | Composite, Metal, Plastic | 7467A415 | 000000 | ||
| DP460 | 1.69 | Cartridge | 60 | 24 hr. | 2,500 | 60 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A26 | 00000 | ||
| DP460 | 6.76 | Cartridge | 60 | 24 hr. | 2,500 | 60 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A85 | 000000 | ||
| DP460 | 13.5 | Cartridge | 60 | 24 hr. | 2,500 | 60 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A416 | 000000 | ||
| DP460NS | 1.69 | Cartridge | 60 | 24 hr. | 2,680 | 60 | 2:1 | Paste | 125,000 | -65 to 350 | Composite, Metal, Plastic | 7467A66 | 00000 | ||
| DP460NS | 6.76 | Cartridge | 60 | 24 hr. | 2,680 | 60 | 2:1 | Paste | 125,000 | -65 to 350 | Composite, Metal, Plastic | 7467A417 | 000000 | ||
| DP460NS | 13.5 | Cartridge | 60 | 24 hr. | 2,680 | 60 | 2:1 | Paste | 125,000 | -65 to 350 | Composite, Metal, Plastic | 7467A67 | 000000 | ||
Slow-Set Epoxy Structural Adhesives
| |  |
Can | Cartridge | Tube |
Take your time positioning parts—these epoxies remain adjustable for at least 90 minutes before setting. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength, day | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Specifications Met | For Joining | Each | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| 2216 | 3.3 fl. oz. | Tube | 90 min. | 7 | 1,700 | 25 | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75045A65 | 000000 | ||
| 2216 | 4 fl. oz. | Tube | 2 hr. | 30 | 3,000 | 25 | 1:1 | Thick Liquid | 10,000 | -65 to 350 | ASTM E595 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75045A78 | 00000 | ||
| 2216 | 26.6 fl. oz. | Can | 90 min. | 7 | 1,700 | 25 | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75045A66 | 000000 | ||
| 2216 | 53.3 fl. oz. | Can | 90 min. | 7 | 1,700 | 25 | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75045A67 | 000000 | ||
| 2216 | 64 fl. oz. | Can | 2 hr. | 30 | 3,000 | 25 | 1:1 | Thick Liquid | 10,000 | -65 to 350 | ASTM E595 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75045A8 | 000000 | ||
| 2216 | 1.66 gal. | Can | 90 min. | 7 | 1,700 | 25 | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75045A68 | 00000000 | ||
| DP190 | 1.64 fl. oz. | Cartridge | 90 min. | 7 | 1,400 | 20 | 1:1 | Thick Liquid | 86,250 | -65 to 350 | — | Masonry, Metal, Plastic, Rubber | 7467A24 | 00000 | ||
| DP190 | 6.76 fl. oz. | Cartridge | 90 min. | 7 | 1,400 | 20 | 1:1 | Thick Liquid | 86,250 | -65 to 350 | — | Masonry, Metal, Plastic, Rubber | 7467A97 | 000000 | ||
Quick-Set Epoxy Structural Adhesives
|
Cartridge |
For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Flammability Rating | For Joining | Each | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| DP100 | 1.64 | Cartridge | 5 | 48 | 750 | 2 | 1:1 | Thick Liquid | 12,000 | -65 to 320 | UL 94 HB | Metal, Plastic, Rubber | 7467A21 | 000000 | ||
| DP100 | 6.76 | Cartridge | 5 | 48 | 750 | 2 | 1:1 | Thick Liquid | 12,000 | -65 to 320 | UL 94 HB | Metal, Plastic, Rubber | 7467A95 | 00000 | ||
| DP100NS | 1.64 | Cartridge | 5 | 48 | 840 | 2 | 1:1 | Paste | 93,750 | -65 to 320 | — | Metal, Plastic, Rubber | 7467A16 | 00000 | ||
Optically Clear Epoxy Structural Adhesives
|
Cartridge |
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Flammability Rating | For Joining | Each | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| DP100 Plus | 1.64 | Cartridge | 3 | 48 | 1,700 | 13 | 1:1 | Thick Liquid | 8,750 | -65 to 300 | UL 94 HB | Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber | 7467A55 | 000000 | ||
| DP105 | 1.64 | Cartridge | 4 | 48 | 1,300 | 35 | 1:1 | Thick Liquid | 7,500 | -65 to 300 | — | Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber | 7467A58 | 00000 | ||
Flame-Retardant Epoxy Structural Adhesives
|
Cartridge |
Rated UL 94 for flame retardance, these epoxies self-extinguish within 10 seconds. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Flammability Rating | For Joining | Each | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| DP100FR | 1.64 | Cartridge | 5 | 48 | 1,100 | 2 | 1:1 | Thick Liquid | 73,750 | -65 to 300 | UL 94 V-0 | Metal, Plastic, Rubber | 7467A28 | 000000 | ||
