45855K71 | Thread Sealant

Filter by

For Use On

For Use With

Container Type

Applicator-Top Bottle

Color

Maximum Temperature

Maximum Pressure for Gases

Environment

For Maximum Thread Diameter

Manufacturer

Cure Type

Locking Strength

Maximum Pressure for Fluids

Manufacturer Model Number

Food Industry Standard

Width

Mixing Required

Consistency

Minimum Temperature

RoHS

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Maximum Pressure

Less than 1,000 psi

1,000 psi to 2,999 psi

3,000 psi to 9,999 psi

10,000 psi to 10,999 psi

11,000 psi or greater

For Use Outdoors

179 Products

About Sealants

Select a sealant that can stretch, contract, and expand enough for your joints.

Non-Hardening Thread Sealants with PTFE


Applicator-Top Can	Tube

PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

Gasoila—Gasoila sealants are designed specifically to resist gasoline and fuel oils, making them best for motors, nozzles, pump assemblies, and fuel lines.

NSF/ANSI 61—Sealants that meet NSF/ANSI 61 adhere to safety standards for drinking water systems.

VOC-Free—VOC-free sealants won’t harm the environment and comply with LEED Green Building standards. VOC stands for volatile organic compound.

Cannot Be Sold To—VOC regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.

		Container		Max. Pressure		Temp., ° F
	Mfr. Model No.	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Certification	Color	Cannot Be Sold To	Features		Each
Low Locking Strength







				Loctite®

				5113	16	Applicator-Top Can	Not Rated	Not Rated	-65	300	2"	Paste	—	—	White	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	—	8149K22	000000




						Gasoila

						GE04	4	Applicator-Top Can	10,000 psi	3,000 psi	-100	600	2"	Paste	—	UL Classified	Green	—	—	5477K101	00000


						GE08	8	Applicator-Top Can	10,000 psi	3,000 psi	-100	600	2"	Paste	—	UL Classified	Green	—	—	5477K102	00000
						GE16	16	Applicator-Top Can	10,000 psi	3,000 psi	-100	600	2"	Paste	—	UL Classified	Green	—	—	5477K103	00000




								Vibra-Tite

								480	4	Applicator-Top Can	10,000 psi	2,000 psi	-65	500	2"	Paste	—	—	White	—	—	5477K106	00000


								480	8	Applicator-Top Can	10,000 psi	2,000 psi	-65	500	2"	Paste	—	—	White	—	—	5477K107	00000
								480	16	Applicator-Top Can	10,000 psi	2,000 psi	-65	500	2"	Paste	—	—	White	—	—	5477K105	00000
								486	4	Applicator-Top Can	150 psi	100 psi	-55	300	2"	Paste	—	—	White	Alexandria, VA; Arlington County, VA; Colorado; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Illinois; Indiana; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; Michigan; New Hampshire; New Jersey; New York; Ohio; Pennsylvania; Prince William County, VA; Rhode Island; Stafford County, VA; Utah	—	5477K109	00000
								486	8	Applicator-Top Can	150 psi	100 psi	-55	300	2"	Paste	—	—	White	Alexandria, VA; Arlington County, VA; Colorado; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Illinois; Indiana; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; Michigan; New Hampshire; New Jersey; New York; Ohio; Pennsylvania; Prince William County, VA; Rhode Island; Stafford County, VA; Utah	—	5477K111	00000
								486	16	Applicator-Top Can	150 psi	100 psi	-55	300	2"	Paste	—	—	White	Alexandria, VA; Arlington County, VA; Colorado; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Illinois; Indiana; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; Michigan; New Hampshire; New Jersey; New York; Ohio; Pennsylvania; Prince William County, VA; Rhode Island; Stafford County, VA; Utah	—	5477K108	00000




										Slic-Tite

										—	4	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	UL Listed	White	—	—	5477K13	00000


										—	8	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	UL Listed	White	—	—	5477K14	00000
										—	16	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	UL Listed	White	—	—	5477K16	00000
										—	32	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	UL Listed	White	—	—	5477K17	00000




												Other Thread Sealants

												—	2	Tube	10,000 psi	3,000 psi	-100	600	3"	Paste	—	CSA Certified CSA-US Certified UL Classified	Blue	—	—	5477K18	0000


												—	4	Applicator-Top Can	5,000 psi	1,500 psi	-50	500	2"	Paste	NSF/ANSI 61	—	Blue	—	—	5477K104	00000
												—	4	Applicator-Top Can	10,000 psi	3,000 psi	-100	600	3"	Paste	—	CSA Certified CSA-US Certified UL Classified	Blue	—	—	5477K19	0000
												—	4	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	C-UL Classified UL Classified	Off-White	—	VOC-Free	5477K112	0000
												—	8	Applicator-Top Can	10,000 psi	3,000 psi	-100	600	3"	Paste	—	CSA Certified CSA-US Certified UL Classified	Blue	—	—	5477K21	00000
												—	8	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	C-UL Classified UL Classified	Off-White	—	VOC-Free	5477K113	00000
												—	16	Applicator-Top Can	10,000 psi	3,000 psi	-100	600	2"	Paste	—	CSA Certified CSA-US Certified UL Classified	Blue	—	—	5477K312	00000
												—	16	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	C-UL Classified UL Classified	Off-White	—	VOC-Free	5477K114	00000
												—	32	Applicator-Top Can	10,000 psi	3,000 psi	-100	600	2"	Paste	—	CSA Certified CSA-US Certified UL Classified	Blue	—	—	5477K313	00000
—												32	Applicator-Top Can	10,000 psi	3,000 psi	-50	500	2"	Paste	NSF/ANSI 61	C-UL Classified UL Classified	Off-White	—	VOC-Free	5477K115	00000

Thread Sealants with PTFE


Applicator-Top Can	Tube

Cartridge	Bottle

PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Low Locking Strength—Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

Medium Locking Strength—Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

		Container				Max. Pressure, psi		Temp., ° F
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength, hr.	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Certification	Color		Each
Low Locking Strength







				Loctite®

				565	0.2	Tube	10 sec.	24	10,000	10,000	-65	300	2"	Paste	NSF/ANSI 61	UL Listed	White	45855K12	00000


				565	1.7	Tube	10 sec.	24	10,000	10,000	-65	300	2"	Paste	NSF/ANSI 61	UL Listed	White	45855K5	00000
				565	8.4	Tube	10 sec.	24	10,000	10,000	-65	300	2"	Paste	NSF/ANSI 61	UL Listed	White	45855K13	00000
				565	10.1	Cartridge	10 sec.	24	10,000	10,000	-65	300	2"	Paste	NSF/ANSI 61	UL Listed	White	1810A58	00000
				565	33.8	Bottle	10 sec.	24	10,000	10,000	-65	300	2"	Paste	NSF/ANSI 61	UL Listed	White	1810A61	000000
				567	0.2	Tube	10 sec.	24	10,000	10,000	-65	400	3"	Paste	NSF/ANSI 61	UL Listed	White	45855K14	0000
				567	1.7	Tube	10 sec.	24	10,000	10,000	-65	400	3"	Paste	NSF/ANSI 61	UL Listed	White	45855K27	00000
				567	8.4	Tube	10 sec.	24	10,000	10,000	-65	400	3"	Paste	NSF/ANSI 61	UL Listed	White	45855K37	000000
				567	11.8	Applicator-Top Can	10 sec.	24	10,000	10,000	-65	400	3"	Paste	NSF/ANSI 61	UL Listed	White	1810A76	000000
				567	33.8	Bottle	10 sec.	24	10,000	10,000	-65	400	3"	Paste	NSF/ANSI 61	UL Listed	White	1810A57	000000




						Vibra-Tite

						420	1.7	Tube	60 min.	72	10,000	10,000	-55	300	6"	Paste	—	—	White	45855K102	00000


						420	8.4	Tube	60 min.	72	10,000	10,000	-55	300	6"	Paste	—	—	White	45855K101	00000
						460	1.7	Tube	60 min.	24	10,000	10,000	-65	400	6"	Paste	—	—	White	45855K106	00000
						460	8.4	Tube	60 min.	24	10,000	10,000	-65	400	6"	Paste	—	—	White	45855K105	00000




								Other Thread Sealants

								—	1.7	Tube	2 hr.	24	10,000	10,000	-55	375	3"	Paste	—	UL Listed	Off-White	45855K88	00000


								—	8.4	Tube	2 hr.	24	10,000	10,000	-55	375	3"	Paste	—	UL Listed	Off-White	45855K89	00000


								Medium Locking Strength







												Loctite®

												577	1.7	Tube	10 sec.	24	10,000	10,000	-65	300	3 1/8"	Paste	—	—	Yellow	45855K15	00000


												577	8.5	Tube	10 sec.	24	10,000	10,000	-65	300	3 1/8"	Paste	—	—	Yellow	1810A26	00000
												592	0.2	Tube	24 hr.	72	10,000	10,000	-65	400	3/8"	Paste	—	—	White	45855K81	0000
												592	1.7	Tube	24 hr.	72	10,000	10,000	-65	400	3/8"	Paste	—	—	White	45855K82	00000
												592	8.4	Tube	24 hr.	72	10,000	10,000	-65	400	3/8"	Paste	—	—	White	45855K83	00000




												Vibra-Tite

												427	1.7	Tube	90 min.	24	10,000	10,000	-65	300	6"	Paste	—	—	Yellow	45855K104	00000


		427	8.4									Tube	90 min.	24	10,000	10,000	-65	300	6"	Paste	—	—	Yellow	45855K103	00000

High-Density Thread Sealant Tape

This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

				Max. Pressure, psi									Each
	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Food Industry Std.	Certification	Mil. Spec.	Color		1-11	12-Up
PTFE







				0.0032" Thick

				1/4"	14	1.2	10,000	10,000	-450 to 550	1/2"	—	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Gray	7346A11	00000	00000


				1/4"	14	1.2	10,000	10,000	-450 to 550	1/2"	FDA Compliant 21 CFR 177.1550	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K22	0000	0000
				3/8"	14	1.2	10,000	10,000	-450 to 550	3/4"	—	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Gray	7346A16	0000	0000
				3/8"	14	1.2	10,000	10,000	-450 to 550	3/4"	FDA Compliant 21 CFR 177.1550	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K19	0000	0000
				1/2"	14	1.2	10,000	10,000	-450 to 550	1"	—	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Gray	7346A12	0000	0000
				1/2"	14	1.2	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K33	0000	0000
				3/4"	14	1.2	10,000	10,000	-450 to 550	1 1/2"	—	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Gray	7346A13	0000	0000
				3/4"	14	1.2	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K44	0000	0000
				1"	14	1.2	10,000	10,000	-450 to 550	2"	—	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Gray	7346A14	00000	0000
				1"	14	1.2	10,000	10,000	-450 to 550	2"	FDA Compliant 21 CFR 177.1550	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K55	00000	00000
				1 1/2"	14	1.2	10,000	10,000	-450 to 550	3"	—	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Gray	7346A15	00000	00000


				1 1/2"	14	1.2	10,000	10,000	-450 to 550	3"	FDA Compliant 21 CFR 177.1550	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K66	00000	00000
				2"	14	1.2	10,000	10,000	-450 to 550	4"	FDA Compliant 21 CFR 177.1550	C-UL Listed Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K77	00000	00000




						0.0035" Thick

						1/4"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K81	00000	0000


						3/8"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K82	00000	00000
						1/2"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K83	00000	00000
						3/4"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K84	00000	00000
						1"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K85	00000	00000
						1 1/2"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K86	00000	00000
						2"	14	1.9	10,000	10,800	-450 to 550	6"	FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	White	6802K87	00000	00000


						Nickel-Filled PTFE







										0.0035" Thick

										1/4"	14	1.4	10,000	10,000	-450 to 550	1/2"	—	C-UL Listed UL Listed	—	Gray	7346A211	00000	00000


										3/8"	14	1.4	10,000	10,000	-450 to 550	3/4"	—	C-UL Listed UL Listed	—	Gray	7346A212	00000	00000
										1/2"	14	1.4	10,000	10,000	-450 to 550	1"	—	C-UL Listed UL Listed	—	Gray	7346A213	00000	00000
										3/4"	14	1.4	10,000	10,000	-450 to 550	1 1/2"	—	C-UL Listed UL Listed	—	Gray	7346A214	00000	00000
										1"	14	1.4	10,000	10,000	-450 to 550	2"	—	C-UL Listed UL Listed	—	Gray	7346A215	00000	00000




0.0040" Thick

1/4"	14											1.9	10,500	11,500	-450 to 550	6"	—	UL Listed	—	White	6802K188	00000	00000


3/8"	14											1.9	10,500	11,500	-450 to 550	6"	—	UL Listed	—	White	6802K189	00000	00000
1/2"	14	1.9										10,500	11,500	-450 to 550	6"	—	UL Listed	—	White	6802K191	00000	00000
3/4"	14	1.9	10,500									11,500	-450 to 550	6"	—	UL Listed	—	White	6802K192	00000	00000
1"	14	1.9	10,500									11,500	-450 to 550	6"	—	UL Listed	—	White	6802K193	00000	00000
2"	14	1.9	10,500									11,500	-450 to 550	6"	—	UL Listed	—	White	6802K195	00000	00000

Thread Sealants for Hydraulic and Compressed Air Systems


Single-Use Capsule	Tube	Bottle

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Medium Locking Strength—These sealants have medium locking strength, which prevents threads from loosening due to vibration and shock. They require a hand tool to unthread.

		Container				Max. Pressure, psi		Temp., ° F
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength, hr.	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Certification	Mil. Spec.	Color		Each
Medium Locking Strength







				Loctite®

				545	0.02	Single-Use Capsule	10 sec.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	1810A2	00000


				545	0.3	Bottle	10 sec.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	1810A78	00000
				545	1.7	Bottle	10 sec.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	45855K63	00000
				545	8.4	Bottle	10 sec.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	45855K11	000000
				569	1.7	Bottle	10 sec.	24	10,000	10,000	-65	300	3/8"	Thin Liquid	—	—	Brown	45855K64	00000
				569	8.4	Bottle	10 sec.	24	10,000	10,000	-65	300	3/8"	Thin Liquid	—	—	Brown	45855K74	000000
				5452	1.7	Tube	1 min.	24	10,000	10,000	-65	300	3/8"	Thick Liquid	—	—	Purple	45855K45	00000
				5452	8.4	Tube	1 min.	24	10,000	10,000	-65	300	3/8"	Thick Liquid	—	—	Purple	45855K46	000000




						Vibra-Tite

						440	0.3	Bottle	4 hr.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	45855K701	0000


						440	1.7	Bottle	4 hr.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	45855K703	00000
						440	8.4	Bottle	4 hr.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	45855K702	00000
						442	1.7	Tube	60 min.	24	10,000	10,000	-65	300	2"	Thick Liquid	—	—	Purple	45855K705	00000
						444	0.3	Bottle	60 min.	24	10,000	10,000	-65	300	2"	Thin Liquid	—	—	Brown	45855K706	0000
						444	1.7	Bottle	60 min.	24	10,000	10,000	-65	300	2"	Thin Liquid	—	—	Brown	45855K708	00000
						444	8.4	Bottle	60 min.	24	10,000	10,000	-65	300	2"	Thin Liquid	—	—	Brown	45855K707	00000




								Other Thread Sealants

								—	1.7	Tube	60 min.	24	10,000	300	-65	400	2"	Paste	Mil. Spec. UL Listed	MIL-S-15204	White	45855K84	00000


								—	8.4	Tube	60 min.	24	10,000	300	-65	400	2"	Paste	Mil. Spec. UL Listed	MIL-S-15204	White	45855K85	00000

Non-Hardening Thread Sealants


Applicator-Top Can	Can

Tube	Applicator-Top Bottle

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. Formulated without PTFE, these sealants are less slippery and less likely to result in overtightenting than sealants that have PTFE, making them good for plastic pipe where overtightening could lead to cracks and breaks. They have low locking strength, so they can be adjusted without tools.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

Cannot Be Sold To—Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.

		Container		Max. Pressure, psi		Temp.
	Mfr. Model No.	Size	Type	For Fluids	For Gases	Min.	Max., ° F	For Max. Thread Dia.	Consistency	Food Industry Std.	Certification	Mil. Spec.	Color	Cannot Be Sold To		Each
Low Locking Strength







				Loctite®

				5117	16 fl. oz.	Applicator-Top Can	10,000	10,000	-65° F	400	2"	Thick Liquid	—	—	—	Black	—	8149K17	000000


				5438	16 fl. oz.	Applicator-Top Can	10,000	10,000	-65° F	300	2"	Paste	—	—	—	White	—	8149K15	00000




						Vibra-Tite

						481	2.4 fl. oz.	Tube	150	100	-65° F	500	2"	Paste	—	—	—	Off-White	Alexandria, VA; Arlington County, VA; Colorado; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Illinois; Indiana; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; Michigan; New Hampshire; New Jersey; New York; Ohio; Pennsylvania; Prince William County, VA; Rhode Island; Stafford County, VA; Utah	4586K204	00000




								Key-Tite

								—	32 fl. oz.	Can	15,000	15,000	-50° F	450	4"	Thick Liquid	—	—	—	Green	—	4586K2	00000


								—	1 gal.	Can	15,000	15,000	-50° F	450	4"	Thick Liquid	—	—	—	Green	—	4586K3	000000




										Other Thread Sealants

										—	2 fl. oz.	Applicator-Top Bottle	10,000	300	-65° F	450	2"	Paste	—	Mil. Spec. UL Recognized Component	MIL-S-15204	Gray	—	4586K11	00000


										—	4 fl. oz.	Applicator-Top Can	5,000	2,600	Not Rated	400	6"	Paste	—	—	—	Gray	Alexandria, VA; Arlington County, VA; Colorado; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Illinois; Indiana; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; Michigan; New Hampshire; New Jersey; New York; Ohio; Pennsylvania; Prince William County, VA; Rhode Island; Stafford County, VA; Utah	4586K205	00000
										—	4 fl. oz.	Applicator-Top Can	6,000	3,000	-100° F	600	2"	Paste	NSF/ANSI 61	—	—	Blue	—	4586K201	00000
										—	8 fl. oz.	Applicator-Top Can	6,000	3,000	-100° F	600	2"	Paste	NSF/ANSI 61	—	—	Blue	—	4586K9	00000
										—	8 fl. oz.	Applicator-Top Can	10,000	300	-65° F	450	2"	Paste	—	Mil. Spec. UL Recognized Component	MIL-S-15204	Gray	—	4586K12	00000
										—	16 fl. oz.	Applicator-Top Can	6,000	3,000	-100° F	600	2"	Paste	NSF/ANSI 61	—	—	Blue	—	4586K202	00000
										—	32 fl. oz.	Applicator-Top Can	6,000	3,000	-100° F	600	2"	Paste	NSF/ANSI 61	—	—	Blue	—	4586K203	00000

High-Temperature Thread Sealants

These sealants have high locking strength, so they work in demanding applications, such as securing mounting studs in motor housings. They also withstand applications with large temperature swings.

Heat—Heat cure sealant requires heat of at least 212° F to harden. Above 300° F, the sealant hardens in about 15 minutes. For temperatures below 300° F, it may take up to 4 hours to harden. It requires both heat and a hand tool to unthread.

Room Temperature—Room-temperature cure sealants must be mixed with water for use; they harden as the water evaporates. Mix about five parts powdered-sealant to one part water to form a thick consistency similar to peanut butter. Hardening can be accelerated with heat; do not heat to above 200° F. They require a hand tool to unthread.

1,000° F Maximum Temperature—1000° F max. temp. sealants expand as they harden.

1,500° F Maximum Temperature—1500° F max. temp. sealants are for use on cement-lined pipe joints prior to welding. The heat from the welding torch helps them begin to harden.

Cannot Be Sold To—Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.

		Container					Max. Pressure, psi		Temp., ° F
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength, hr.	Mix Ratio	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Mil. Spec.	For Use On	Color	Cannot Be Sold To		Each
Medium Locking Strength







				Heat Cure Loctite®

				5540	16	Can	10 sec.	12	—	2,900	2,900	-40	1,300	4"	Thin Liquid	—	MIL-S-15204	Pipe, Aluminum, Brass, Bronze, Cast Iron, Concrete, Iron, Metal, Stainless Steel, Steel, Tin, Titanium, Galvanized Iron, Galvanized Steel	Brown	—	1959A101	0000000


				5550	32	Can	10 sec.	2	—	5,000	5,000	-40	1,500	6"	Paste	—	MIL-S-15204	Aluminum, Brass, Bronze, Cast Iron, Concrete, Iron, Metal, Stainless Steel, Steel, Tin, Titanium, Galvanized Iron, Galvanized Steel	Brown	—	1959A102	000000


				High Locking Strength







								Heat Cure Sealants

								—	32	Can	15 min.	4	—	10,000	2,000	-310	1,500	2"	Thick Liquid	—	MIL-S-15204	ABS, Aluminum, Brass, Bronze, Cast Iron, Copper, CPVC, PETG, PVC, PVDF, Stainless Steel, Steel	Black	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	1959A31	000000




										Room Temperature Cure X-Pando

										—	14	Can	60 min.	24	5:1	5,000	5,000	-300	1,000	6"	Powder	NSF/ANSI 61	—	Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel	Gray	—	6818K11	00000


										—	14	Can	60 min.	24	5:1	5,000	5,000	-300	1,500	6"	Powder	NSF/ANSI 61	—	Aluminum, Steel	Gray	—	6818K24	00000
										—	70	Can	60 min.	24	5:1	5,000	5,000	-300	1,000	6"	Powder	NSF/ANSI 61	—	Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel, Steel	Gray	—	6818K12	00000
										—	70	Can	60 min.	24	5:1	5,000	5,000	-300	1,500	6"	Powder	NSF/ANSI 61	—	Aluminum, Steel	Gray	—	6818K26	00000

Thread Sealants for Oxygen Systems


Tube	Jar

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants are non-hardening, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

Tube—The sealant in a tube is a good alternative to thread sealant tape—like tape, it forms PTFE strings between tightened threads, but excess material liquefies, so it won’t clog system components downstream.

	Container		Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	Max. Temp. for Oxygen, ° F	For Max. Thread Dia.	Consistency	Certification	Mil. Spec.	Color		Each
Low Locking Strength



		3.5	Tube	10,000	10,000	-400	500	140	6"	Paste	—	—	White	4538K1	000000


		3.5	Jar	10,000	10,000	-450	550	140	6"	Paste	Mil. Spec.	MIL-PRF-27617	Green	4538K6	000000

Thread Sealants


Applicator-Top Can	Tube	Bottle

These thread sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Low Locking Strength—Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

Medium Locking Strength—Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

VOC-Free—Sealants that are VOC-free won’t harm the environment and comply with LEED Green Building standards. VOC stands for volatile organic compound.

		Container				Max. Pressure, psi		Temp.
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	For Fluids	For Gases	Min.	Max., ° F	For Max. Thread Dia.	Consistency	Food Industry Std.	Certification	Mil. Spec.	Color	Features		Each
Low Locking Strength







				Loctite®

				564	1.7	Tube	10 sec.	24 hr.	10,000	10,000	-65° F	300	3/8"	Paste	—	—	—	Off-White	—	1810A84	000000


				564	8.5	Tube	10 sec.	24 hr.	10,000	10,000	Not Rated	300	3/8"	Paste	—	—	—	Off-White	—	1810A83	000000
				572	1.7	Tube	10 sec.	24 hr.	10,000	10,000	-55° F	300	3 1/8"	Paste	—	—	—	Off-White	—	1810A25	00000




						Other Thread Sealants

						—	8	Applicator-Top Can	1 sec.	1 sec.	500	350	-50° F	350	6"	Paste	—	—	—	Gray	VOC-Free	45855K801	0000


						Medium Locking Strength







										Loctite®

										542	1.7	Bottle	10 sec.	24 hr.	10,000	10,000	-65° F	300	1"	Thin Liquid	—	—	—	Brown	—	45855K71	00000
										Thread Sealant, Medium Lock Strength, Loctite® 542, 1.7 FL. oz Bottle Product Detail QuantityEachIn stock


										571	8.5	Bottle	10 sec.	24 hr.	10,000	10,000	-65° F	300	3/8"	Thick Liquid	—	—	—	Brown	—	1810A53	000000
										580	1.7	Tube	10 sec.	24 hr.	10,000	10,000	-65° F	300	3/8"	Paste	—	—	—	White	—	45855K16	00000
										5770	1.7	Tube	10 sec.	24 hr.	10,000	10,000	-65° F	530	3/8"	Paste	—	—	—	Off-White	—	45855K43	00000
										5770	8.4	Tube	10 sec.	24 hr.	10,000	10,000	-65° F	530	3/8"	Paste	—	—	—	Off-White	—	45855K44	000000
										5772	1.7	Bottle	10 sec.	24 hr.	10,000	10,000	-65° F	300	3 1/8"	Thick Liquid	—	—	—	Yellow	—	1810A35	000000




												Other Thread Sealants

												—	1.7	Tube	10 min.	24 hr.	10,000	300	-65° F	400	2"	Paste	NSF/ANSI 61	Mil. Spec. UL Listed	MIL-S-15204	White	—	45855K86	00000


												—	8.4	Tube	10 min.	24 hr.	10,000	300	-65° F	400	2"	Paste	NSF/ANSI 61	Mil. Spec. UL Listed	MIL-S-15204	White	—	45855K87	00000

Non-Hardening High-Temperature Thread Sealants


Applicator-Top Can	Can	Tube

	Container			Max. Pressure, psi		Temp.
	Size, fl. oz.	Net Wt., lb.	Type	For Fluids	For Gases	Min.	Max., ° F	For Max. Thread Dia.	Consistency	Color		Each
Low Locking Strength







				Key Graphite

				—	0.625	Applicator-Top Can	15,000	15,000	-30° F	750	4"	Paste	Black	4586K8	000000


				—	1	Can	15,000	15,000	-30° F	750	4"	Paste	Black	4586K5	00000
				—	2.75	Can	15,000	15,000	-30° F	750	4"	Paste	Black	4586K6	000000
				—	10	Can	15,000	15,000	-30° F	750	4"	Paste	Black	4586K7	000000




						Other Thread Sealants

						4.4	—	Tube	2,300	2,300	Not Rated	1,100	2"	Paste	Black	1965K1	00000

Reusable Non-Hardening Thread Sealants for Coarse Threads

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

	Container		Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Choose a Color		Each
Low Locking Strength



		2	Applicator-Top Bottle	10,000	300	-65	300	4"	Thick Liquid	NSF/ANSI 61	White, Orange	4592K2	000000

Drip-Free Thread Sealants with PTFE

Apply this thread sealant stick without a mess. It contains PTFE, which provides a slippery surface that keeps threads from binding. Since the sealant is anaerobic, it doesn’t begin to harden until coated surfaces are threaded together, blocking exposure to air. It has low locking strength, so it prevents threads from loosening due to vibration and can be adjusted without tools. It meets NSF/ANSI 61 for use with drinking water.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container				Max. Pressure, psi		Temp., ° F
	Mfr. Model No.	Net Wt., oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Color		Each
Low Locking Strength







				Loctite®

				561	0.7	Stick	5	72	10,000	10,000	-65	300	3 1/8"	Semi-Solid	NSF/ANSI 61	White	1011A11	000000

Thread Sealant Tape

Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.

ePTFE with Graphite—ePTFE tape with graphite creates a better seal between threads than plain PTFE tape, which helps prevent fluid and gas leaks. The graphite attaches to the PTFE, so this tape does not emit harmful VOCs.

				Max. Pressure, psi
	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Food Industry Std.	Certification	Mil. Spec.	Color		Each
PTFE







				0.0025" Thick

				1/4"	16	0.55	10,000	10,000	-450 to 550	1/2"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K11	00000


				3/8"	16	0.55	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K18	0000
				1/2"	16	0.55	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K12	0000
				3/4"	16	0.55	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K13	0000
				1"	16	0.55	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	UL Listed	—	White	4591K14	0000




						0.0032" Thick

						1/4"	14	0.7	10,000	10,000	-450 to 550	1/2"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K11	0000


						3/8"	14	0.7	10,000	10,000	-450 to 550	3/4"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K18	0000
						1/2"	14	0.7	10,000	10,000	-450 to 550	1"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K12	0000
						3/4"	14	0.7	10,000	10,000	-450 to 550	1 1/2"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K13	0000
						1"	14	0.7	10,000	10,000	-450 to 550	2"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K14	0000
						1 1/2"	14	0.7	10,000	10,000	-450 to 550	3"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K15	00000
						2"	14	0.7	10,000	10,000	-450 to 550	4"	FDA Compliant 21 CFR 177.1550	Mil. Spec. UL Listed	MIL-T-27730	White	6802K16	00000




								0.0035" Thick

								1/2"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A15	0000


								3/4"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A16	0000
								1"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A17	00000
								2"	39	0.8	10,000	10,000	-450 to 500	2"	—	C-UL Listed UL Listed	—	Blue	4934A18	00000


								ePTFE with Graphite







												0.0020" Thick

												5/8"	27	0.8	2,900	2,900	-400 to 500	1 1/4"	—	—	—	Gray	6802K25	00000

Reusable Non-Hardening Thread Sealants for Fine Threads

Formulated to flow into small spaces, use these sealants between fine threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

	Container		Max. Pressure, psi		Temp., ° F
	Size, fl. oz.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Food Industry Std.	Choose a Color		Each
Low Locking Strength



		2	Applicator-Top Bottle	10,000	300	-65	300	4"	Thick Liquid	NSF/ANSI 61	White, Orange	4592K3	000000

Drip-Free Non-Hardening Thread Sealants

Apply this thread sealant stick without a mess. Often used in high-vibration applications that could cause standard thread sealants to fail, this sealant never fully hardens and remains pliable enough to self-heal and stop leaks before they start. It has low locking strength, so it can be adjusted without tools.

	Container		Max. Pressure, psi		Temp., ° F
	Net Wt., oz.	Type	For Fluids	For Gases	Min.	Max.	For Max. Thread Dia.	Consistency	Color		Each
Low Locking Strength



		1.3	Stick	500	300	-50	250	2"	Semi-Solid	Off-White	4592K16	00000

Thread Sealant Tape for Stainless Steel Threads

This tape is thicker to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

				Max. Pressure, psi								Each
	Wd.	Lg., ft.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Certification	Mil. Spec.	Color		1-11	12-Up
PTFE







				0.0043" Thick

				1/4"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N11	00000	00000


				3/8"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N12	0000	0000
				1/2"	21	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N17	0000	0000
				1/2"	50	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N13	00000	00000
				3/4"	21	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N14	00000	0000
				1"	21	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N18	0000	0000
				1"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N15	00000	00000
				1 1/2"	43	1.05	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	MIL-T-27730	Gray	1726N16	00000	00000

Choose-a-Color High-Density Thread Sealant Tape

Use color to identify water, gas, and chemical connections. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

Green—Green tape is often used for oxygen.

Orange and Yellow—Orange and yellow tape is commonly used to indicate fuel and gas.

Red—Red tape is often used for water.

				Max. Pressure, psi								Each
	Wd.	Lg., yd.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Certification	Mil. Spec.	Choose a Color		1-11	12-Up
PTFE







				0.0032" Thick

				1/4"	14	1.2	10,000	10,000	-450 to 550	1/2"	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Green, Orange, Red, Yellow	44945K11	00000	00000


				3/8"	14	1.2	10,000	10,000	-450 to 550	3/4"	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Green, Orange, Red, Yellow	44945K17	0000	0000
				1/2"	14	1.2	10,000	10,000	-450 to 550	1"	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Green, Orange, Red, Yellow	44945K12	0000	0000
				3/4"	14	1.2	10,000	10,000	-450 to 550	1 1/2"	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Green, Orange, Red, Yellow	44945K13	0000	0000
				1"	14	1.2	10,000	10,000	-450 to 550	2"	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Green, Orange, Red, Yellow	44945K14	00000	00000
				1 1/2"	14	1.2	10,000	10,000	-450 to 550	3"	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Green, Orange, Red, Yellow	44945K15	00000	00000
				2"	14	1.2	10,000	10,000	-450 to 550	4"	Mil. Spec. UL Listed	Fed. Spec. A-A-58092 Type II MIL-T-27730	Green, Orange, Red, Yellow	44945K16	00000	00000

Drip-Free Non-Hardening Thread Sealants with PTFE

Apply these thread sealant sticks without a mess. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

	Container		Max. Pressure, psi
	Net Wt., oz.	Type	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Consistency	Food Industry Std.	Certification	Environment	Color		Each
Low Locking Strength







				Slic-Tite

				1.2	Stick	5,000	500	-50 to 350	2"	Semi-Solid	NSF/ANSI 61	—	Food and Beverage, Outdoor	White	5477K11	000000




						Other Thread Sealants

						1.3	Stick	2,000	350	-50 to 350	2"	Semi-Solid	NSF/ANSI 61	UL Listed	Food and Beverage, Outdoor	Off-White	4592K34	0000


						4	Stick	2,000	350	-50 to 350	2"	Semi-Solid	NSF/ANSI 61	UL Listed	Food and Beverage, Outdoor	Off-White	4592K11	0000

Thread Sealants for Refrigeration Systems

For use in refrigeration systems and applications exposed to strong chemicals, these sealants have excellent solvent resistance.

Anaerobic

Anaerobic sealants don’t begin to harden until coated surfaces are threaded together, blocking exposure to air. These sealants have medium locking strength, which prevents threads from loosening with vibration and shock. They require a hand tool to unthread.

		Container				Max. Pressure, psi
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength, hr.	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Consistency	For Use With	Color		Each
Medium Locking Strength







				Loctite®

				554	0.3	Bottle	10 sec.	24	10,000	10,000	-65 to 300	3"	Thick Liquid	R-12 Refrigerant, R-134A Refrigerant, R-22 Refrigerant, R-404A Refrigerant, R-407C Refrigerant, R-502 Refrigerant	Red	45855K72	000000


				554	8.4	Bottle	10 sec.	24	10,000	10,000	-65 to 300	3"	Thick Liquid	R-12 Refrigerant, R-134A Refrigerant, R-22 Refrigerant, R-404A Refrigerant, R-407C Refrigerant, R-502 Refrigerant	Red	45855K73	000000




						Vibra-Tite

						446	1.7	Bottle	40 min.	24	10,000	10,000	-65 to 300	3"	Thick Liquid	R-12 Refrigerant, R-134A Refrigerant, R-22 Refrigerant, R-404A Refrigerant, R-407C Refrigerant, R-502 Refrigerant	Red	45855K53	00000

Nonhardening

Non-hardening sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. These sealants are NSF registered H2 for use in food-processing areas, but they can’t come into contact with food.

	Container		Max. Pressure
	Size, fl. oz.	Type	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Consistency	For Use With	Food Industry Std.	Color	Pkg. Qty.		Pkg.
Low Locking Strength



		1	Bottle	Not Rated	Not Rated	-35 to 425	6"	Thick Liquid	R-12 Refrigerant, R-134A Refrigerant, R-22 Refrigerant, R-404A Refrigerant, R-407C Refrigerant, R-502 Refrigerant	NSF Registered H2	Clear	2	45855K55	000000


		1	Bottle	Not Rated	Not Rated	-30 to 350	6"	Thick Liquid	R-12 Refrigerant, R-22 Refrigerant	NSF Registered H2	Clear	2	45855K54	00000

Thread Sealant Tape for Copper, Brass, and Bronze Threads

With 10% copper flake content, this tape matches the color of copper, brass, and bronze threads for a seamless finish. It’s made of PTFE, so it has a slippery surface to keep threads from binding. This tape has a higher density than standard tape for a better seal between threads.

				Max. Pressure, psi
	Wd.	Lg., ft.	Density, g/cm³	For Fluids	For Gases	Temp. Range, ° F	For Max. Thread Dia.	Certification	Mil. Spec.	Color		Each
Copper-Filled PTFE







				0.0045" Thick

				1/2"	50	1.6	10,000	300	-450 to 500	1 1/2"	Mil. Spec.	MIL-T-27730	Copper	4840N11	000000


				3/4"	50	1.6	10,000	300	-450 to 500	4"	Mil. Spec.	MIL-T-27730	Copper	4840N12	00000