McMaster-Carr logo
    Filter by
    Arbor Hole Diameter
    Quick-Change Connection Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Number of Vacuum Holes
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    1,920 Products

    Quick-Change Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Quick-Change Sanding Discs.
    Image of Specification. Front orientation. TR. Discs.
    Image of Specification. Front orientation. TS. Discs.

    TR

    TS

    Image of Specification. Front orientation. TP. Discs.

    TP

    Swap one sanding disc for another in seconds. The connector on these discs twists or snaps into place, so you can get right back to work. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood362546465A183000000
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood502546465A17600000
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood602546465A17300000
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood802546465A16900000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood362546465A28300000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood402546465A27900000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood502546465A27600000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood602546465A27300000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood802546465A26900000
    1"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood24254635A75100000
    1"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood36254635A74400000
    1"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood50254635A73300000
    1"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood60254635A72200000
    1"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80254635A71100000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood362546465A38300000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood402546465A37900000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood502546465A37600000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood602546465A37300000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood802546465A36900000
    1 1/2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood24254635A85100000
    1 1/2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood36254635A84100000
    1 1/2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood50254635A83100000
    1 1/2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood60254635A82100000
    1 1/2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80254635A81100000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood361046465A48300000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood401046465A47900000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood501046465A47600000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood601046465A47300000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood801046465A46900000
    2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood24104635A35100000
    2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood36104635A34100000
    2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood50104635A33100000
    2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood60104635A32100000
    2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80104635A31100000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood361046465A58300000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood401046465A57900000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood501046465A57600000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood601046465A57300000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood801046465A56900000
    3"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood24104635A45100000
    3"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood36104635A44100000
    3"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood50104635A43100000
    3"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood60104635A42100000
    3"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80104635A41100000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood361046465A64300000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood401046465A63900000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood601046465A63300000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood801046465A62900000
    4"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood24104635A58100000
    4"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood60104635A53100000
    4"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80104635A52100000
     
    For Smooth Finish
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1002546465A16600000
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1202546465A16300000
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1802546465A15900000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1002546465A26600000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1202546465A26300000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1802546465A25900000
    1"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood120254635A66100000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1002546465A36600000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1202546465A36300000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1802546465A35900000
    1 1/2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood120254635A76100000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1001046465A46600000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1201046465A46300000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1801046465A45900000
    2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood100104635A37100000
    2"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood120104635A36100000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1001046465A56600000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1201046465A56300000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1801046465A55900000
    3"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood100104635A47100000
    3"Zirconia AluminaCloth3M Roloc, Norton Speed-Lok TRSteel, Wood120104635A46100000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1001046465A62600000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1201046465A62300000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood1801046465A61900000
     
    For Extra-Smooth Finish
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood2402546465A15600000
    3/4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood3202546465A15300000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood2402546465A25600000
    1"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood3202546465A25300000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood2402546465A35600000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood3202546465A35300000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood2401046465A45600000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood3201046465A45300000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood2401046465A55600000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood3201046465A55300000
    4"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood3201046465A61300000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36254701A76600000
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood40254701A69900000
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood50254701A68800000
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60254701A67700000
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80254701A66600000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36254701A51100000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood40254701A82200000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60254701A53300000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80254701A54400000
    1"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood24254635A7500000
    1"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36254635A7400000
    1"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60254635A7200000
    1"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80254635A7100000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36254701A11100000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood40254701A84400000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood50254701A12200000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60254701A13300000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80254701A14400000
    1 1/2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood24254635A8500000
    1 1/2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36254635A8400000
    1 1/2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60254635A8200000
    1 1/2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80254635A8100000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36104701A21100000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood40104701A86600000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood50104701A22200000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60104701A23300000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80104701A24400000
    2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood24104635A3500000
    2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36104635A3400000
    2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood50104635A3300000
    2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60104635A3200000
    2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80104635A3100000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36104701A31100000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood40104701A88100000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood50104701A32200000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60104701A33300000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80104701A34400000
    3"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood24104635A4500000
    3"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood36104635A4400000
    3"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood50104635A4300000
    3"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60104635A4200000
    3"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80104635A4100000
    4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood40104701A9100000
    4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood50104701A4200000
    4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood60104701A4300000
     
    For Smooth Finish
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood100254701A65500000
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120254701A64400000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood100254701A81100000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120254701A55500000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood180254701A56600000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120254701A15500000
    1 1/2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120254635A7600000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood100104701A85500000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120104701A25500000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood180104701A26600000
    2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood100104635A3700000
    2"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120104635A3600000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood100104701A87700000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120104701A35500000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood180104701A36600000
    3"Zirconia AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120104635A4600000
    4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120104701A4500000
    4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood180104701A4600000
     
    For Extra-Smooth Finish
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240254701A62200000
    3/4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320254701A59900000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240254701A57700000
    1"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320254701A58800000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240254701A17700000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320254701A18800000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240104701A27700000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320104701A28800000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240104701A37700000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320104701A38800000
    4"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240104701A4700000
     
    TP Style Quick-Change Connector
     
    For Rough Finish
    3/4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood362546465A18200000
    3/4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood402546465A17800000
    3/4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood502546465A17500000
    3/4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood802546465A16800000
    1"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood362546465A28200000
    1"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood402546465A27800000
    1"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood802546465A26800000
    1 1/2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood602546465A37200000
    1 1/2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood802546465A36800000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood361046465A48200000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood401046465A47800000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood501046465A47500000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood601046465A47200000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood801046465A46800000
    2"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood24104635A35200000
    2"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood36104635A34200000
    2"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood60104635A32200000
    2"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood80104635A31200000
    3"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood361046465A58200000
    3"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood401046465A57800000
    3"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood801046465A56800000
    3"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood24104635A45200000
    3"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood36104635A44200000
    3"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood60104635A42200000
    3"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood80104635A41200000
    4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood501046465A63500000
    4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood601046465A63200000
     
    For Smooth Finish
    3/4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1002546465A16500000
    3/4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1202546465A16200000
    3/4"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1802546465A15800000
    1"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1002546465A26500000
    1"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1202546465A26200000
    1"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1802546465A25800000
    1 1/2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1202546465A36200000
    1 1/2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1802546465A35800000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1001046465A46500000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1201046465A46200000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1801046465A45800000
    2"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood100104635A37200000
    2"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood120104635A36200000
    3"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1201046465A56200000
    3"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood1801046465A55800000
    3"Zirconia AluminaClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood120104635A46200000
     
    For Extra-Smooth Finish
    1"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood3202546465A25200000
    1 1/2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood3202546465A35200000
    2"Aluminum OxideClothMerit Power-Lock Type I, Norton TY Power-Lock Type ISteel, Wood2401046465A45500000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    3/4"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A71000000000000000000
    1"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A72000000000000000
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
    4"3M Roloc, Norton Speed-Lok TR1/4"15,000Medium46325A94000000000000000
     
    TS Style Quick-Change Connector
    3/4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"40,000Medium4701A770000000000000
    1"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"40,000Medium4701A750000000000000
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
    4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"15,000Medium4701A74000000000000000
     
    TP Style Quick-Change Connector
    3/4"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"40,000Medium47045A8100000000000000
    1"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"40,000Medium47045A8200000000000000
    1 1/2"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"30,000Medium47045A51000000000000000
    2"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"30,000Medium47045A52000000000000000
    3"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"20,000Medium47045A53000000000000000
    4"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"15,000Medium47045A54000000000000000
     

    Adhesive-Back Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Sanding Discs.
    Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 801004700A62100000
    3/4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders401004700A2030000
    3/4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders501004700A1960000
    3/4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders801004700A1820000
    1"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders36, 50, 60, 801004700A64100000
    1 1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders36, 50, 80504700A6510000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders36, 40, 50, 60, 80504700A66100000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders36, 40, 50, 60, 80254700A6710000
    4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 80104700A6810000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders36, 40, 50, 60, 80104700A6910000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders80254707A3100000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders801004707A6900000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders36, 40, 50, 60, 80104700A71100000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders80254707A5300000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders801004707A7900000
    8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders36, 40, 50, 60, 8054700A72100000
    9"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A73100000
    10"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A74100000
    12"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A75100000
    15"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A81100000
    16"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A82100000
    18"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A83100000
    20"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A84100000
    24"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 8054700A851000000
     
    For Smooth Finish
    1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180, 2201004700A6220000
    3/4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180, 2201004700A6320000
    1"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180, 2201004700A64200000
    1 1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180, 220504700A6520000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders120, 180, 220504700A66200000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders120, 180, 220254700A6720000
    4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180, 220104700A6820000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 180, 220104700A6920000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220254707A12500000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 150, 180, 2201004707A12100000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 180, 220104700A71200000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220254707A12700000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 2201004707A12300000
    8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 180, 22054700A72200000
    9"ClothSteel, WoodStationary Disc Sanders100, 120, 180, 22054700A73200000
    10"ClothSteel, WoodStationary Disc Sanders100, 120, 180, 22054700A74200000
    12"ClothSteel, WoodStationary Disc Sanders100, 120, 180, 22054700A75200000
    15"ClothSteel, WoodStationary Disc Sanders100, 120, 18054700A81200000
    16"ClothSteel, WoodStationary Disc Sanders100, 120, 22054700A82200000
    18"ClothSteel, WoodStationary Disc Sanders100, 120, 18054700A83200000
    20"ClothSteel, WoodStationary Disc Sanders100, 120, 180, 22054700A84200000
    24"ClothSteel, WoodStationary Disc Sanders120, 180, 22054700A852000000
     
    For Extra-Smooth Finish
    1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders240, 320, 4001004700A6230000
    3/4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders240, 320, 4001004700A6330000
    1"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders320, 4001004700A64300000
    1 1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders240, 400504700A6530000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders240, 320, 400504700A66300000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders240, 320, 400254700A6730000
    4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders240, 320, 400104700A6830000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 400104700A6930000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 400254707A13500000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 4001004707A13100000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 400104700A71300000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 400254707A13700000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 4001004707A13300000
    8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 40054700A72300000
    9"ClothSteel, WoodStationary Disc Sanders240, 320, 40054700A73300000
    10"ClothSteel, WoodStationary Disc Sanders240, 320, 40054700A74300000
    12"ClothSteel, WoodStationary Disc Sanders240, 320, 40054700A75300000
    15"ClothSteel, WoodStationary Disc Sanders240, 40054700A81300000
    16"ClothSteel, WoodStationary Disc Sanders32054700A31800000
    18"ClothSteel, WoodStationary Disc Sanders240, 320, 40054700A83300000
    20"ClothSteel, WoodStationary Disc Sanders240, 320, 40054700A84300000
    24"ClothSteel, WoodStationary Disc Sanders240, 320, 40054700A853000000
     
    For Polished Finish
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders3000504611A34900000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders3000104611A35900000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders3000104611A37900000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders3000104611A38900000
     
    Silicon Carbide Abrasive
     
    For Extra-Smooth Finish
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders400104611A37100000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders400104611A38100000
     
    For Polished Finish
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders600504611A34200000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200504611A34400000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders2000504611A34700000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders600104611A35200000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200104611A35400000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders2000104611A35700000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104611A37200000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders800104611A37300000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A37400000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1600104611A37600000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104611A37700000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104611A38200000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders800104611A38300000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A38400000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1600104611A38600000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104611A38700000
     
    Zirconia Alumina Abrasive
     
    For Rough Finish
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders36, 40, 50, 60, 80147125A2710000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders36, 40, 50, 60, 80147125A2810000
    8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders36, 40, 50, 60, 80147125A2910000
    9"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A6910000
    10"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A7610000
    12"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A7710000
    14"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A78100000
    15"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A79100000
    16"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A79200000
    18"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A79300000
    20"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A79400000
    24"ClothSteel, WoodStationary Disc Sanders36, 40, 50, 60, 80147125A79500000
     
    For Smooth Finish
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders120147125A810000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders120147125A820000
    8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders120147125A2160000
    9"ClothSteel, WoodStationary Disc Sanders120147125A2260000
    10"ClothSteel, WoodStationary Disc Sanders120147125A830000
    12"ClothSteel, WoodStationary Disc Sanders120147125A840000
    14"ClothSteel, WoodStationary Disc Sanders120147125A8500000
    15"ClothSteel, WoodStationary Disc Sanders120147125A8600000
    16"ClothSteel, WoodStationary Disc Sanders120147125A8700000
    18"ClothSteel, WoodStationary Disc Sanders120147125A8800000
    20"ClothSteel, WoodStationary Disc Sanders120147125A8900000
    24"ClothSteel, WoodStationary Disc Sanders120147125A9100000
     

    Hook and Loop Vacuum Sanding Discs

    Image of Product. For Any Vacuum Sander Hole Style. Front orientation. For Any Vacuum Holes. Hook and Loop Vacuum Sanding Discs, Paper Abrasive Backing.
    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. Hook and Loop Vacuum Sanding Discs.

    For Any Vacuum

    Sander Hole Style

    For Five-Hole

    Vacuum Sanders

    Image of Product. For Six-Hole Vacuum Sanders. Front orientation. For 6 Vacuum Holes. Hook and Loop Vacuum Sanding Discs.
    Image of Product. For Eight-Hole Vacuum Sanders. Front orientation. For 8 Vacuum Holes. Hook and Loop Vacuum Sanding Discs.

    For Six-Hole

    Vacuum Sanders

    For Eight-Hole

    Vacuum Sanders

    Pair these discs with a vacuum sander to keep your workspace clean. Dust is drawn away through the holes instead of floating into the air or building up on the abrasive. The hook-and-loop mount lets you switch grits without scrapping the disc, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.
    Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    5"57/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders60, 80254724A127000000
    5"87/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders60, 80254724A13400000
    5"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders60256734N10100000
    6"67/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders60, 80254724A14300000
    6"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders60256734N10800000
     
    For Smooth Finish
    5"57/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 220254724A12800000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders180104321A7500000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders220104321A7600000
    5"87/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 220254724A13500000
    5"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 180, 220256734N20100000
    6"67/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 220254724A14400000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders180104321A7700000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders220104321A7800000
    6"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 180, 220256734N20200000
     
    For Extra-Smooth Finish
    5"57/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320, 400254724A12900000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240104321A5100000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320104321A5200000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders400104321A5300000
    5"87/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320, 400254724A13600000
    5"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320256734N20300000
    6"67/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320, 400254724A14500000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240104321A6100000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320104321A6200000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders400104321A6300000
    6"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320256734N20400000
     
    For Polished Finish
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders2400104611A79300000
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders3000104611A79600000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders600104321A5400000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders800104321A5500000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1000104321A5600000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1200104321A5700000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1600104321A5800000
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders2000104321A5900000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders600104321A6400000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders800104321A6500000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1000104321A6600000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1200104321A6700000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1600104321A6800000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders2000104321A6900000
     
    Silicon Carbide Abrasive
     
    For Extra-Smooth Finish
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders400104611A77700000
    6"63/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders400104611A79700000
     
    For Polished Finish
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders600104611A77900000
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders800104611A78200000
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1200104611A78400000
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1600104611A78800000
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders2000104611A79100000
    6"63/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders800, 1200, 2000104521A65100000
     
    Ceramic Alumina Abrasive
     
    For Rough Finish
    5"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80258261A10100000
    6"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80258261A10700000
     
    For Smooth Finish
    5"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 180, 220258261A20100000
    6"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 180, 220258261A20200000
     
    For Extra-Smooth Finish
    5"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320258261A20300000
    6"Any—PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320258261A20400000
     
    Accessories for Sanding Discs
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"55/16"-24
    		10,0004724A94000000
    5"85/16"-24
    		10,0004724A9500000
    5"Any5/16"-24
    		15,0004724A10200000
    6"65/16"-24
    		10,0004724A4900000
    6"Any5/16"-24
    		15,0004724A10100000
     
    Cushioning Pads
    Image of Product. Front orientation. Sanding Disc Cushioning Pads. Hook and Loop Mount.
    Dia.
    Thk.
    Material
    Color
    For No. of
    Vacuum Holes
    Each
    Clog Resistant
    5"1/2"FoamBlackAny6691N103000000
    6"1/2"FoamBlackAny6691N10400000
     

    Arbor-Mount Sanding Discs

    Image of Product. Unthreaded Arbor Hole. Front orientation. Sanding Discs. Arbor-Mount Sanding Discs.

    Unthreaded Arbor Hole

    Image of Product. Threaded Arbor Hole. Front orientation. Threaded Arbor Hole. Arbor-Mount Sanding Discs.

    Threaded Arbor Hole

    Image of Specification. Flat. Front orientation. Flat Disc. Discs.
    Image of Specification. Angled. Front orientation. Angled Disc. Discs.

    Flat

    Angled

    Mount these discs directly to your tool’s arbor for the most stable, controlled sanding. They require a backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24254699A49000000
    4 1/2"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 80254728A69300000
    4 1/2"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 80254699A11700000
    4 1/2"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders13,3003614516A110000
    5"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—24, 50, 60, 80254728A71300000
    5"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—1654699A5800000
    5"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 80254699A11900000
    5"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders12,2503614516A120000
    7"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 80254728A72300000
    7"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—1654699A1100000
    7"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 80254699A12800000
    9"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—16, 24, 36, 50, 60, 8054699A73100000
     
    For Smooth Finish
    4"5/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—12014699A220000
    4 1/2"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—100, 120104728A69400000
    4 1/2"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—100, 12054699A6820000
    5"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—100, 120104728A71400000
    5"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—100, 12054699A69200000
    7"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—100, 120104728A72400000
    7"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—100, 12054699A71800000
    9"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—100, 12054699A73200000
     
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 8054732A5500000
    4 1/2"7/8"—UnthreadedFiberAngledSteel, WoodAngle Grinders13,3003614516A130000
    5"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—3654732A11100000
    5"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 8054732A5600000
    5"7/8"—UnthreadedFiberAngledSteel, WoodAngle Grinders12,2503614516A140000
    7"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders—3654732A11200000
    7"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 50, 60, 8054732A5700000
    9"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders—24, 36, 5054732A5800000
     

    Long-Life Quick-Change Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Long-Life Quick-Change Sanding Discs.
    Image of Specification. Front orientation. TR. Discs.

    TR

    Image of Specification. Front orientation. TS. Discs.

    TS

    Get more sand for your dollar. These discs have densely packed abrasive to last longer than standard quick-change discs. When they finally wear out, their connector lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Fiber Abrasive Backing—Multiple layers of cotton fiber are embedded with abrasive that resists clogging.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80254293A411000000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80104293A4180000
    2"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRSteel, Wood24, 36, 54, 80143835A7310000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood80104293A42600000
    3"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRSteel, Wood24, 36, 54, 80143835A7410000
     
    For Smooth Finish
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood120254293A41200000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood180254293A41300000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood120104293A4190000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood180104293A4210000
    2"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRSteel, Wood120, 180143835A7320000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood120104293A42700000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood180104293A42800000
    3"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRSteel, Wood120, 180143835A7420000
     
    For Extra-Smooth Finish
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood240254293A41400000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood320254293A41500000
    1 1/2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood400254293A41600000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood240104293A4220000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood320104293A4230000
    2"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood400104293A4240000
    2"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRSteel, Wood320143835A510000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood240104293A42900000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood320104293A43100000
    3"Aluminum OxideCloth3M Roloc, Norton Speed-Lok TRSteel, Wood400104293A43200000
    3"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRSteel, Wood320143835A610000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80254293A51100000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80104293A5180000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood80104293A52600000
     
    For Smooth Finish
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120254293A51200000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood180254293A51300000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120104293A5190000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood180104293A5210000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood120104293A52700000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood180104293A52800000
     
    For Extra-Smooth Finish
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240254293A51400000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320254293A51500000
    1 1/2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood400254293A51600000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240104293A5220000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320104293A5230000
    2"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood400104293A5240000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood240104293A52900000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood320104293A53100000
    3"Aluminum OxideCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood400104293A53200000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TS Style Quick-Change Connector
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
     

    Long-Life Nylon Mesh Quick-Change Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Long-Life Nylon Mesh Quick-Change Sanding Discs.
    Image of Specification. Front orientation. TR. Surface Conditioning, Discs.

    TR

    Image of Specification. Front orientation. TS. Surface Conditioning, Discs.

    TS

    Densely packed with abrasive to resist wear, these discs also create consistent finishes. Also known as non-woven or surface-conditioning discs, their nylon mesh backing resists clogging and flexes to compensate for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. When discs finally wear out, the connector on the back lets you swap them out in seconds. Choose the connection style that matches your tool or backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    3/4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4682A14100000
    3/4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse4682A1450000
    1"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4682A1420000
    1"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse4682A1460000
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4682A1430000
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse4682A1470000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4682A1750000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse4682A120000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4682A1770000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse4682A1120000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4682A1440000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse4682A1480000
     
    For Smooth Finish
    3/4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium4682A1490000
    1"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium4682A150000
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium4682A1510000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium4682A1110000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium4682A130000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium4682A1520000
     
    For Extra-Smooth Finish
    3/4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine4682A1570000
    3/4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGreenFine4682A1530000
    1"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine4682A1580000
    1"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGreenFine4682A1540000
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine4682A1590000
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGreenFine4682A1550000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine4682A1870000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGreenFine4682A1830000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine4682A1890000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGreenFine4682A1850000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGreenFine4682A1560000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    3/4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlackExtra Coarse4682A160000
    3/4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse4682A1630000
    1"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlackExtra Coarse4682A1610000
    1"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse4682A1640000
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlackExtra Coarse4682A1620000
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse4682A1650000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlackExtra Coarse4682A1760000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse4682A1790000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlackExtra Coarse4682A1780000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse4682A180000
     
    For Smooth Finish
    3/4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium4682A1660000
    1"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium4682A1670000
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium4682A1680000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium4682A1810000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium4682A1820000
     
    For Extra-Smooth Finish
    3/4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine4682A1720000
    3/4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodGreenFine4682A1690000
    1"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine4682A1730000
    1"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodGreenFine4682A170000
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine4682A1740000
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodGreenFine4682A1710000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine4682A1880000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodGreenFine4682A1840000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine4682A190000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodGreenFine4682A1860000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    3/4"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A71000000000000000000
    1"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A72000000000000000
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
    4"3M Roloc, Norton Speed-Lok TR1/4"15,000Medium46325A94000000000000000
     
    TS Style Quick-Change Connector
    3/4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"40,000Medium4701A770000000000000
    1"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"40,000Medium4701A750000000000000
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
     

    Long-Life Arbor-Mount Flap Sanding Discs

    Image of Product. Front orientation. Contains Inset. Sanding Discs. Long-Life Arbor-Mount Flap Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    With more abrasive than standard flap sanding discs, these last 30-40% longer. Their overlapping flaps reveal new grit as you work for steady material removal and even finishes. Fit discs fit over your tool’s arbor for the most stable mounting.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Each
    Package
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass15,00040, 60, 804793A6100000104793A611000000
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass15,00036, 40, 60, 804644A1210000104644A13100000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804793A5100000————0
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 80———0104793A501000000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 804644A1220000104644A13200000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804793A5200000104793A502000000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 804644A1230000104644A13300000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 604644A12400000104644A13400000
    5"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804793A670000104793A67100000
    5"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 804644A1250000104644A13500000
    6"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass10,000604644A94600000104644A996000000
    6"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass10,000404793A6900000104793A42100000
    6"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass10,00036, 40, 60, 804644A1270000104644A13700000
    7"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass8,500404793A53400000104793A574000000
     
    For Smooth Finish
    4"5/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass15,0001204793A140000104793A14100000
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass15,0001204644A9150000104644A90500000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204793A51100000104793A551000000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,0001204644A9260000104644A98600000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204793A52100000104793A561000000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,0001204644A93700000104644A99100000
    5"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,0001204644A9320000104644A97400000
     
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass15,00040, 60, 804793A810000104793A81100000
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass15,00036, 40, 60, 8047055A1500001047055A11500000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804793A7100000104793A701000000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 8047055A1600001047055A11600000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804793A7200000104793A702000000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 8047055A1400001047055A11400000
    5"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 604793A820000104793A82100000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00040, 60, 8047055A18000001047055A11800000
    5"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804793A830000104793A83100000
    5"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 8047055A1900001047055A11900000
    6"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass10,00040, 604793A8400000104793A84100000
    6"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass10,00040, 60, 8047055A27000001047055A207000000
    6"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass10,00040, 60, 804793A850000104793A85100000
    6"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass10,00036, 40, 60, 8047055A28000001047055A20800000
    7"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass8,50040, 60, 8047055A29000001047055A209000000
    7"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass8,5004047055A155000001047055A255000000
     
    For Smooth Finish
    4"5/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass15,0001204793A180000104793A18100000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204793A71100000104793A751000000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204793A72100000104793A761000000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00012047055A12900001047055A22900000
    6"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass10,0001204793A7900000104793A70900000
     

    Clog-Resistant Adhesive-Back Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Clog-Resistant Adhesive-Back Sanding Discs.
    Spend more time sanding and less time replacing clogged discs. A slick coating prevents dust and debris buildup on the abrasive surface. Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 801004675A11100000
    3/4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 801004675A2110000
    1"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 80504675A3110000
    1 1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 80504675A4110000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 80254675A5110000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders40, 60, 80254675A6110000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders40, 60, 80104675A7110000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders802547805A6200000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders8010047805A5100000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders40, 60, 80104675A81100000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders802547805A6800000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders8010047805A5200000
    8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders40, 60, 8054675A95100000
    9"ClothSteel, WoodStationary Disc Sanders40, 60, 8054675A29100000
    10"ClothSteel, WoodStationary Disc Sanders40, 60, 8014675A9770000
    12"ClothSteel, WoodStationary Disc Sanders40, 60, 8014675A4910000
    15"ClothSteel, WoodStationary Disc Sanders40, 60, 8014675A5910000
    16"ClothSteel, WoodStationary Disc Sanders40, 60, 8014675A69100000
    18"ClothSteel, WoodStationary Disc Sanders40, 60, 8014675A79100000
    20"ClothSteel, WoodStationary Disc Sanders40, 60, 8014675A89100000
    24"ClothSteel, WoodStationary Disc Sanders40, 60, 8014675A99100000
     
    For Smooth Finish
    1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 1801004675A1120000
    3/4"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 1801004675A2120000
    1"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180504675A3120000
    1 1/2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180504675A4120000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180254675A5120000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180254675A6120000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 180104675A7120000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 2202547805A12500000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 22010047805A12100000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 180104675A81200000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 2202547805A12700000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 22010047805A12300000
    8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 18054675A95200000
    9"ClothSteel, WoodStationary Disc Sanders100, 120, 18054675A29200000
    10"ClothSteel, WoodStationary Disc Sanders100, 120, 18014675A9780000
    12"ClothSteel, WoodStationary Disc Sanders100, 120, 18014675A4920000
    15"ClothSteel, WoodStationary Disc Sanders100, 120, 18014675A5920000
    16"ClothSteel, WoodStationary Disc Sanders100, 120, 18014675A69200000
    18"ClothSteel, WoodStationary Disc Sanders100, 120, 18014675A79200000
    20"ClothSteel, WoodStationary Disc Sanders100, 120, 18014675A89200000
    24"ClothSteel, WoodStationary Disc Sanders100, 120, 18014675A99200000
     
    For Extra-Smooth Finish
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 4002547805A13500000
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 280, 320, 40010047805A13100000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240104184A370000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders320104184A380000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders400104184A390000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 4002547805A13700000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 280, 320, 40010047805A13300000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240104184A4700000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders320104184A4800000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders400104184A4900000
     
    For Polished Finish
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104184A610000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders800104184A6200000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1000104184A6300000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104184A6400000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1600104184A6500000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104184A6600000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104184A5100000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders800104184A5200000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1000104184A5300000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104184A5400000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1600104184A5500000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104184A5600000
     

    Adhesive-Back Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Sanding Discs for Soft Metals, Plastic, and Rubber.
    Prevent clogging and smearing when sanding soft materials. The abrasive won’t trap particles, so these discs stay sharp longer. Press them onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Synthetic Paper Abrasive Backing—Waterproof to resist deterioration and curling when used for wet sanding.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Smooth Finish
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders180104611A269000000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders180104611A28500000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders180104611A29300000
     
    For Extra-Smooth Finish
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders320104611A27100000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders320104611A28600000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders320, 400104521A27100000
     
    For Polished Finish
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders800, 3000104521A23200000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders800, 3000104521A26200000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders800, 1600, 3000104521A27200000
     
    Silicon Carbide Abrasive
     
    For Rough Finish
    2"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders40, 60, 80104678A1110000
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders40, 60, 80104678A1210000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders40, 60, 80104678A13100000
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders801004722A7700000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders40, 60, 80104678A14100000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders801004722A6700000
    8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders40, 8014678A1510000
    8"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders60547185A590000
    8"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders80547185A580000
    9"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders60, 8014678A1610000
    9"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders60547185A6100000
    9"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders80547185A620000
    10"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders40, 60, 8014678A1710000
    10"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders60547185A4100000
    10"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders80547185A4200000
    12"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders40, 60, 8014678A1810000
    12"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders60547185A7900000
    12"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders80547185A7800000
    20"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders60547185A8100000
    20"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders80547185A8200000
     
    For Smooth Finish
    2"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180104678A1120000
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders100, 120, 180104678A1220000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders100, 120, 180104678A13200000
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 2201004722A87100000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders100, 120, 180104678A14200000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 2201004722A88100000
    8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders100, 120, 18014678A1520000
    8"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders120547185A560000
    8"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders180547185A550000
    9"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders100, 120, 18014678A1620000
    9"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders180547185A6400000
    10"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders100, 120, 18014678A1720000
    10"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders120547185A4300000
    10"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders180547185A4400000
    12"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders100, 120, 18014678A1820000
    12"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders120547185A7600000
    12"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders180547185A7500000
    20"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders120547185A8300000
    20"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders180547185A8400000
     
    For Extra-Smooth Finish
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders2401004722A7300000
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders3201004722A7100000
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders4001004722A8100000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders2401004722A9200000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders3201004722A6100000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders4001004722A9300000
    8"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders240547185A540000
    8"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders400547185A520000
    9"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders240547185A650000
    10"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders240547185A4500000
    10"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders400547185A4600000
    12"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders240547185A7400000
    12"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders400547185A7200000
    20"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders240547185A8500000
    20"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders400547185A8600000
     
    For Polished Finish
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders6001004722A8200000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders6001004722A9400000
    8"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders600547185A510000
    9"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders600547185A670000
    10"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders600547185A4700000
    12"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders600547185A7100000
    20"Synthetic PaperAluminum, Brass, Bronze, Copper, Plastic, RubberStationary Disc Sanders600547185A8700000
     

    Nylon Mesh Quick-Change Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs.
    Image of Specification. Front orientation. TR. Surface Conditioning, Discs.

    TR

    Image of Specification. Front orientation. TS. Surface Conditioning, Discs.

    TS

    Achieve a more consistent finish than with standard paper- or cloth-backed discs. Also known as non-woven or surface-conditioning discs, these have a nylon mesh backing that resists clogging and compensates for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Each
    Package
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Each
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse46325A71000005046325A711000000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse46325A7400002546325A71300000
    2"Silicon Carbide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4729A110000104729A11100000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse46325A7700002546325A71500000
    3"Silicon Carbide3M Roloc, Norton Speed-Lok TRSteel, WoodBlackExtra Coarse4729A1200000104729A112000000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBrownCoarse46325A8100002546325A717000000
     
    For Smooth Finish
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A7200005046325A71900000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A7500005046325A72200000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A7800002546325A72400000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A8200002546325A726000000
     
    For Extra-Smooth Finish
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine46325A7300005046325A72800000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine46325A7600002546325A73100000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine46325A7900002546325A73300000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodBlueVery Fine46325A8300002546325A735000000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse46325A84900005046325A71200000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse46325A85100005046325A71400000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse46325A85200002546325A71600000
    4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBrownCoarse46325A85300002546325A718000000
     
    For Smooth Finish
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A84500005046325A72100000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A84600005046325A72300000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A84700002546325A72500000
    4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A84800002546325A727000000
     
    For Extra-Smooth Finish
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine46325A84100005046325A72900000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine46325A84200005046325A73200000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine46325A84300002546325A73400000
    4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodBlueVery Fine46325A84400002546325A736000000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
    4"3M Roloc, Norton Speed-Lok TR1/4"15,000Medium46325A94000000000000000
     
    TS Style Quick-Change Connector
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
    4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"15,000Medium4701A74000000000000000
     

    Fast-Cutting Nylon Mesh Quick-Change Sanding Discs

    Image of Product. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. Sanding Discs. Fast-Cutting Nylon Mesh Quick-Change Sanding Discs.

    Precision-Shaped Ceramic Alumina

    Image of Specification. Front orientation. TR. Discs, Fast Cut, Surface Conditioning.

    TR

    Image of Specification. Front orientation. TS. Discs, Fast Cut, Surface Conditioning.

    TS

    Remove material quickly without sacrificing a consistent finish. These discs have precision-shaped abrasive that cuts through hard metals and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Also known as non-woven or surface-conditioning discs, their nylon mesh backing resists clogging and compensates for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    Mfr.
    Series
    For Use On
    Color
    Nylon Mesh
    Grade
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    3/4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N212000000
    1"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse106531N22100000
    1"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N22200000
    1 1/2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse106531N23100000
    1 1/2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N23200000
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse106531N24100000
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N24200000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse16531N2510000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse16531N2520000
    4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse16531N2610000
    4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse16531N2620000
     
    For Smooth Finish
    3/4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N21300000
    1"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N22300000
    1 1/2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N23300000
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N24300000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium16531N2530000
    4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium16531N2630000
     
    For Extra-Smooth Finish
    3/4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N21500000
    3/4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N21400000
    1"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N22500000
    1"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N22400000
    1 1/2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N23500000
    1 1/2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N23400000
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N24500000
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N24400000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine16531N2550000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine16531N2540000
    4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine16531N2650000
    4"Ceramic Alumina3M Roloc, Norton Speed-Lok TR3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine16531N2640000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    3/4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N11200000
    1"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse106531N12100000
    1"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N12200000
    1 1/2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse106531N13100000
    1 1/2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N13200000
    2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse106531N14100000
    2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse106531N14200000
    3"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse16531N1510000
    3"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse16531N1520000
    4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse16531N1610000
    4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBrownCoarse16531N1620000
     
    For Smooth Finish
    3/4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N11300000
    1"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N12300000
    1 1/2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N13300000
    2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium106531N14300000
    3"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium16531N1530000
    4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumRedMedium16531N1630000
     
    For Extra-Smooth Finish
    3/4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N11500000
    3/4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N11400000
    1"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N12500000
    1"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N12400000
    1 1/2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N13500000
    1 1/2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N13400000
    2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine106531N14500000
    2"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine106531N14400000
    3"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine16531N1550000
    3"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine16531N1540000
    4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumBlueVery Fine16531N1650000
    4"Ceramic Alumina3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGreenFine16531N1640000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    3/4"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A71000000000000000000
    1"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A72000000000000000
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
    4"3M Roloc, Norton Speed-Lok TR1/4"15,000Medium46325A94000000000000000
     
    TS Style Quick-Change Connector
    3/4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"40,000Medium4701A770000000000000
    1"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"40,000Medium4701A77600000000000000
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
    4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"15,000Medium4701A74000000000000000
     

    Long-Life Hook and Loop Vacuum Sanding Discs

    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. For Vacuum Sanders, Discs, Hook and Loop Mount.
    Image of Product. For Six-Hole Vacuum Sanders. Front orientation. For 6 Vacuum Holes. For Vacuum Sanders, Discs, Hook and Loop Mount.

    For Five-Hole

    Vacuum Sanders

    For Six-Hole

    Vacuum Sanders

    Image of Product. For Eight-Hole Vacuum Sanders. Front orientation. For 8 Vacuum Holes. For Vacuum Sanders, Discs, Hook and Loop Mount.

    For Eight-Hole

    Vacuum Sanders

    The tough abrasive on these discs stays sharp longer than other vacuum sanding discs. They have holes for drawing dust away with a vacuum sander, keeping workspaces and discs clear. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    5"57/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80258261A31000000
    5"87/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80258261A6100000
    6"67/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80258261A5300000
     
    For Smooth Finish
    5"57/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 220258261A15600000
    5"87/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 220258261A15800000
    6"67/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 220258261A16500000
     
    For Extra-Smooth Finish
    5"57/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320, 400258261A15700000
    5"87/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320, 400258261A15900000
    6"67/16"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240, 320, 400258261A16600000
     
    Accessories for Sanding Discs
    Cushioning Pads
    Image of Product. Front orientation. Sanding Disc Cushioning Pads. Hook and Loop Mount.
    Dia.
    Thk.
    Material
    Color
    For No. of
    Vacuum Holes
    Each
    Clog Resistant
    5"1/2"FoamBlackAny6691N103000000
    6"1/2"FoamBlackAny6691N10400000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"55/16"-24
    		10,0004724A94000000
    5"85/16"-24
    		10,0004724A9500000
    5"Any5/16"-24
    		15,0004724A10200000
    6"65/16"-24
    		10,0004724A4900000
    6"Any5/16"-24
    		15,0004724A10100000
     

    Hook and Loop Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Hook and Loop Sanding Discs.
    Switch from one grit to another without wasting discs. The hook-and-loop mount makes these discs reusable—unlike adhesive-back discs, which are one and done. Pair with a compatible sanding tool or backup pad.
    Plastic Abrasive Backing—A slick coating on the abrasive prevents dust and debris from building up.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders60, 80254724A124000000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders60, 80254724A13700000
    11 1/4"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders8054724A41200000
     
    For Smooth Finish
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220254724A12500000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders180104321A7100000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders220104321A7200000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220254724A13800000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders180104321A7300000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders220104321A7400000
    11 1/4"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 22054724A14600000
     
    For Extra-Smooth Finish
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 400254724A12600000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240104321A1700000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders320104321A1800000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders400104321A1900000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 400254724A13900000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240104321A2700000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders320104321A2800000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders400104321A2900000
    11 1/4"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 40054724A14700000
     
    For Polished Finish
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders3000504611A68600000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders3000104611A69600000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders3000104611A72600000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104321A4100000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders800104321A4200000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1000104321A4300000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104321A4400000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1600104321A4500000
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104321A4600000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders3000104611A73600000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104321A3100000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders800104321A3200000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1000104321A3300000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104321A3400000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1600104321A3500000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104321A3600000
     
    Silicon Carbide Abrasive
     
    For Extra-Smooth Finish
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders400104611A68700000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders400104611A70700000
     
    For Polished Finish
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders600504611A67800000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200504611A68100000
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders2000504611A68400000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders600104611A68800000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders800104611A68900000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200104611A69100000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1600104611A69300000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders2000104611A69400000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104611A70800000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders800104611A70900000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A72100000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1600104611A72300000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104611A72400000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders600104611A72800000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A73100000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders2000104611A73400000
     

    Nylon Mesh Quick-Change Sanding Discs for Curved Surfaces

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Curved Surfaces.
    Image of Specification. Front orientation. TR. Discs, Surface Conditioning.

    TR

    Image of Specification. Front orientation. TS. Discs, Surface Conditioning.

    TS

    Produce consistent finishes on curved surfaces to prepare them for coating and painting. Since these discs don’t have a reinforced backing like other nylon mesh discs, they’re more flexible and less aggressive. Also known as non-woven or surface-conditioning discs, they resist clogging and compensate for uneven sanding pressure. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Each
    Package
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Each
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonCoarse46325A51000005046325A737000000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonCoarse46325A5400005046325A73900000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonCoarse46325A5700002546325A74300000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonCoarse46325A6100001046325A74500000
     
    For Smooth Finish
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A5200005046325A74700000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A5500005046325A74900000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A5800002546325A75200000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonMedium46325A6200001046325A75400000
     
    For Extra-Smooth Finish
    1 1/2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonFine46325A5300005046325A75600000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonFine46325A5600005046325A75800000
    2"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonVery Fine46325A20100005046325A20200000
    3"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonFine46325A5900002546325A76100000
    4"Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodMaroonFine46325A6300001046325A76300000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonCoarse46325A87100005046325A74200000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonCoarse46325A87200002546325A74400000
    4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonCoarse46325A87300001046325A74600000
     
    For Smooth Finish
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A86500005046325A74800000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A86600005046325A75100000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A86700002546325A75300000
    4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonMedium46325A86800001046325A75500000
     
    For Extra-Smooth Finish
    1 1/2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonFine46325A86100005046325A75700000
    2"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonFine46325A86200005046325A75900000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonFine46325A86300002546325A76200000
    3"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonVery Fine46325A20300002546325A20400000
    4"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodMaroonFine46325A86400001046325A76400000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
    4"3M Roloc, Norton Speed-Lok TR1/4"15,000Medium46325A94000000000000000
     
    TS Style Quick-Change Connector
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
    4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"15,000Medium4701A74000000000000000
     

    Aggressive-Removal Quick-Change Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Aggressive-Removal Quick-Change Sanding Discs.
    Image of Specification. Front orientation. TS. Aggressive Removal, Discs.

    TS

    Image of Specification. Front orientation. TR. Aggressive Removal, Discs.

    TR

    Cut through more material in one sweep—the tough backing handles heavier pressure than standard discs. The connector lets you swap out these discs in seconds, so you can get right back to work. Choose the connection style that matches your tool or backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood362547035A361000000
    1 1/2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood502547035A35100000
    1 1/2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood602547035A34100000
    1 1/2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood802547035A33100000
    2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood362547035A16100000
    2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood502547035A15100000
    2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood602547035A14100000
    2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood802547035A13100000
    3"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood362547035A26100000
    3"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood502547035A25100000
    3"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood602547035A24100000
    3"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood802547035A23100000
     
    For Smooth Finish
    1 1/2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood1002547035A32100000
    1 1/2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood1202547035A31100000
    2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood1002547035A12100000
    2"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood1202547035A11100000
    3"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood1002547035A22100000
    3"Ceramic AluminaFiber3M Roloc, Norton Speed-Lok TRSteel, Wood1202547035A21100000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood362547035A36200000
    1 1/2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood502547035A35200000
    1 1/2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood602547035A34200000
    1 1/2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood802547035A33200000
    2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood362547035A16200000
    2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood502547035A15200000
    2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood602547035A14200000
    2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood802547035A13200000
    3"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood362547035A26200000
    3"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood502547035A25200000
    3"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood602547035A24200000
    3"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood802547035A23200000
     
    For Smooth Finish
    1 1/2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood1002547035A32200000
    1 1/2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood1202547035A31200000
    2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood1002547035A12200000
    2"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood1202547035A11200000
    3"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood1002547035A22200000
    3"Ceramic AluminaFiberNorton Speed-Lok TS, Standard Abrasive SocAttSteel, Wood1202547035A21200000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TS Style Quick-Change Connector
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
     

    Adhesive-Back Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Sanding Discs for Stainless Steel and Hard Metals.
    The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Polished Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2000504611A224000000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2000104611A22800000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2000104611A23300000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2400104611A13100000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders2000104611A23700000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2000104611A24200000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2400104611A15100000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2000104611A24600000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2400104611A16100000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2000104611A25100000
    10"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders2000104611A259000000
    12"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders2000104611A981000000
     
    Silicon Carbide Abrasive
     
    For Smooth Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders220504611A11900000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders220104611A12900000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders220104611A13900000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders220104611A14900000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders220104611A15900000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders220104611A16900000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders220104611A17900000
    10"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders220104611A199000000
    12"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders220104611A219000000
     
    For Extra-Smooth Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders320504611A11600000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders320104611A12600000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders240, 320104521A13200000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders320104611A14600000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders240, 320104521A15200000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders240, 320104521A16200000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders320104611A17600000
    10"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders320104611A196000000
    12"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders320104611A216000000
     
    For Polished Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1000504611A11300000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1000104611A12300000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders500104611A13500000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders800104611A13400000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1000104611A13300000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1200104611A23200000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1600104611A13200000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders1000104611A14300000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders500104611A15500000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders800104611A15400000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1000104611A15300000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A24100000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1600104611A15200000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders500104611A16500000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders800104611A16400000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1000104611A16300000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A24500000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1600104611A16200000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1000104611A17300000
    10"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders1000104611A193000000
    12"ClothIron, Nickel, Stainless Steel, Steel, TitaniumStationary Disc Sanders1000104611A213000000
     
    Ceramic Alumina Abrasive
     
    For Rough Finish
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders8010047085A14000000
    5"PlasticIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders50147125A8030000
    5"PlasticIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders60147125A8040000
    5"PlasticIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders80147125A8010000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders8010047085A24000000
    12"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders36147125A80900000
    12"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders60147125A81100000
    12"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders80147125A81200000
     
    For Smooth Finish
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders12010047085A12000000
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders15010047085A3600000
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders18010047085A3700000
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders22010047085A3800000
    5"PlasticIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders120147125A8020000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders10010047085A56000000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders12010047085A22000000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders15010047085A46000000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders18010047085A47000000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders22010047085A48000000
     
    For Extra-Smooth Finish
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders24010047085A3900000
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders32010047085A4200000
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders40010047085A4300000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders24010047085A49000000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders32010047085A52000000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders40010047085A53000000
     
    For Polished Finish
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders60010047125A80500000
    5"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders80010047125A80600000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders60010047125A807000000
    6"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders80010047125A808000000
     

    Quick-Change Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Quick-Change Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Front orientation. TR. Discs.

    TR

    Image of Specification. Front orientation. TS. Discs.

    TS

    The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Twist or snap the connector on the back to swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium362546395A78000000
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium502546395A5400000
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium602546395A5300000
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium802546395A5200000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium361046395A4100000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium501046395A3900000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium601046395A3800000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium801046395A3700000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium361046395A4600000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium501046395A4500000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium601046395A4400000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium801046395A4300000
     
    For Smooth Finish
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium1202546395A7900000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium1201046395A3600000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium1201046395A4200000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium362546395A7400000
    1 1/2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium502546395A7300000
    1 1/2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium602546395A6900000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium361046395A7500000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium501046395A1700000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium601046395A1600000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium801046395A1500000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium361046395A7600000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium501046395A7700000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium601046395A2100000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium801046395A1900000
     
    For Smooth Finish
    1 1/2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium1202546395A7100000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium1201046395A1400000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TS Style Quick-Change Connector
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
     

    Arbor-Mount Flap Sanding Discs

    Image of Product. Front orientation. Contains Inset. Sanding Discs. Arbor-Mount Flap Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.
    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Flat

    Angled

    Overlapping flaps reveal new grit as you work for steady material removal and even finishes. Mount these discs directly to your tool’s arbor for the most stable, controlled sanding.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Ceramic Alumina/Zirconia Alumina Blend Abrasive—Combine the fast cutting of ceramic alumina with the toughness of zirconia alumina under heavy pressure.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Each
    Package
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass15,00036, 60, 804644A21100000104644A101000000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804745A1100000104745A10100000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 804644A11200000104644A102000000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804745A120000104745A10200000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 804644A1130000104644A10300000
    7"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass8,500404644A8300000104644A831000000
     
    For Smooth Finish
    4"5/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass15,0001204745A440000104745A44100000
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass15,0001204644A87400000104644A86400000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204745A11100000104745A15100000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,0001204644A5600000104644A561000000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204745A1210000104745A16100000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,0001204644A3200000104644A321000000
    5"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204745A5400000104745A54100000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,0001204644A6600000104644A661000000
    5"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204745A5800000104745A58100000
    5"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,0001204644A7600000104644A761000000
    6"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass10,0001204644A96500000104644A997000000
     
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass15,000604745A460000104745A46100000
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass15,00040, 60, 8047055A81000001047055A81100000
    5"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 804745A2600000104745A20600000
    5"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804745A2700000104745A20700000
    6"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass10,00040, 60, 804745A2800000104745A208000000
    6"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass10,00040, 60, 8047055A11000001047055A111000000
    6"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass10,00040, 60, 804745A2900000104745A209000000
    6"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass10,00040, 60, 8047055A13000001047055A113000000
     
    For Smooth Finish
    4"5/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass15,0001204745A480000104745A48100000
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass15,00012047055A42000001047055A42100000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204745A31100000104745A35100000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00012047055A26000001047055A206000000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,0001204745A3210000104745A36100000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00012047055A4400001047055A44100000
    6"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass10,0001204745A7400000104745A74100000
    6"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass10,00012047055A175000001047055A275000000
    7"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass8,5001204745A33100000104745A371000000
     
    Ceramic Alumina/Zirconia Alumina Blend Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804745A3100000104745A30100000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 8047055A21000001047055A201000000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass12,00040, 60, 804745A320000104745A30200000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 60, 8047055A8200001047055A82100000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00040, 60, 8047055A31000001047055A311000000
    5"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass12,00036, 40, 6047055A51000001047055A511000000
    7"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass8,50040, 60, 804745A3300000104745A303000000
    7"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass8,50036, 40, 60, 8047055A61000001047055A611000000
    7"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass8,50040, 804745A9400000104745A304000000
    7"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass8,50036, 40, 6047055A93000001047055A932000000
     

    Hook and Loop Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Sanding Discs. Hook and Loop Sanding Discs for Soft Metals, Plastic, and Rubber.
    Avoid buildup of soft materials and wasting discs when you need to change grit. The abrasive keeps dust from collecting and the hook-and-loop mount makes these discs reusable, unlike adhesive discs. Pair with a compatible sanding tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Smooth Finish
    2"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders180504611A593000000
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders180104611A60100000
    4"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders180104611A60800000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders180104611A63100000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders180104611A63800000
     
    For Extra-Smooth Finish
    2"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders320, 400504521A42100000
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders320, 400104521A43100000
    4"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders320, 400104521A44100000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders320, 400104521A46100000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders320, 400104521A47100000
     
    For Polished Finish
    2"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders800, 1600, 3000504521A42200000
    3"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders800, 1600, 3000104521A43200000
    4"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberGrinders for Bits and Burs, Portable Disc Sanders800, 1600, 3000104521A44200000
    5"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders800, 1600, 3000104521A46200000
    6"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders800, 1600, 3000104521A47200000
     
    Silicon Carbide Abrasive
     
    For Rough Finish
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders80254724A1100000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders80254724A2100000
     
    For Smooth Finish
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220254724A14800000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220254724A21100000
     
    For Extra-Smooth Finish
    5"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders240, 320, 400254724A14900000
    6"PaperAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders240, 320, 400254724A21200000
     

    Quick-Change Sanding Disc Assortments

    Image of Product. Front orientation. TR. Discs, Sold as Assortments.
    Image of Product. TR. Top orientation. TR. Discs, Sold as Assortments.

    TR

    Image of Product. Front orientation. TP. Discs, Sold as Assortments.
    Image of Product. TP. Top orientation. TP. Discs, Sold as Assortments.

    TP

    Tackle a range of sanding jobs. These assortments include a variety of grits for everything from heavy material removal to finishing. The connector on the back lets discs swap out in seconds, so you can get right back to work. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    TP Style Quick-Change Connector—These assortments are larger than TR style, with two abrasive materials and the compatible backup pads.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Includes
    No. of
    Pieces
    Abrasive Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    For Use With
    Grit
    Each
    TR Style Quick-Change Connector
    1 1/2"5 each 36, 60, 80, 120-grit Discs20Aluminum OxideCloth3M RolocSteel, WoodGrinders for Bits and Burs36, 60, 80, 1206601N17000000
    2"5 each 36, 60, 80, 120-grit Discs20Aluminum OxideCloth3M RolocSteel, WoodGrinders for Bits and Burs36, 60, 80, 1206601N1800000
    3"5 each 36, 60, 80, 120-grit Discs20Aluminum OxideCloth3M RolocSteel, WoodGrinders for Bits and Burs36, 60, 80, 1206601N1900000
     
    TP Style Quick-Change Connector
    1", 2", 3"5 each 60, 100-grit 2" Diameter Discs
    20 each 80, 120-grit 2" Diameter Discs
    25 each 40, 80-grit 1" Diameter Discs
    25 each 50, 100-grit 3" Diameter Discs
    Plastic case
    Three Backup Pads (one each in 1", 2", and 3" diameters) with 1/4" Shank    		153Aluminum Oxide, Zirconia AluminaClothMerit Power-Lock Type ISteel, WoodGrinders for Bits and Burs40, 50, 60, 80, 100, 1206601N11000000
     
    Backup Pads
    Image of Product. Front orientation. Backup Pads. Quick-Change-Fastener Mount, Sold as Assortments.
    Image of Product. Front orientation. Backup Pads. Quick-Change-Fastener Mount, Sold as Assortments.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TP Style Quick-Change Connector
    1"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"40,000Medium47045A8200000000000000
    2"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"30,000Medium47045A52000000000000000
    3"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"20,000Medium47045A53000000000000000
     

    Nylon Mesh Hook and Loop Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Hook and Loop Sanding Discs.
    Supported by nylon mesh instead of paper or cloth, these discs achieve a more consistent finish. Also known as non-woven or surface-conditioning discs, they resist clogging and flex to compensate for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. The hook-and-loop backing lets you switch grits without waste, unlike adhesive-backed discs. Pair them with a compatible sanding tool or backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Each
    Dia.
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    1-24
    25-Up
    Aluminum Oxide Abrasive
     
    For Rough Finish
    2"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersBeigeCoarse46555A140000000000
    3"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersBeigeCoarse46555A1700000000
    4"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersBeigeCoarse46555A2100000000
    4 1/2"Steel, WoodPortable Disc SandersBeigeCoarse46555A58100000000
    4 1/2"Steel, WoodPortable Disc SandersBlackExtra Coarse46555A11100000000
    5"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBeigeCoarse46555A2400000000
    5"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBlackExtra Coarse46555A11200000000
    Nylon Mesh Cushioned Hook and Loop Sanding Disc, Extra Coarse Grade, 5" Diameter
    EachIn stock
    6"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBeigeCoarse46555A2700000000
    7"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBeigeCoarse46555A3100000000
    7"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBlackExtra Coarse46555A11300000000
    8"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBeigeCoarse46555A34000000000
     
    For Smooth Finish
    2"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersMaroonMedium46555A1500000000
    3"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersMaroonMedium46555A1800000000
    4"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersMaroonMedium46555A2200000000
    4 1/2"Steel, WoodPortable Disc SandersMaroonMedium46555A58200000000
    5"Steel, WoodPortable Disc Sanders, Stationary Disc SandersMaroonMedium46555A2500000000
    6"Steel, WoodPortable Disc Sanders, Stationary Disc SandersMaroonMedium46555A2800000000
    7"Steel, WoodPortable Disc Sanders, Stationary Disc SandersMaroonMedium46555A3200000000
    8"Steel, WoodPortable Disc Sanders, Stationary Disc SandersMaroonMedium46555A35000000000
     
    For Extra-Smooth Finish
    2"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersBlueVery Fine46555A16100000000
    3"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersBlueVery Fine46555A19100000000
    4"Steel, WoodGrinders for Bits and Burs, Portable Disc SandersBlueVery Fine46555A23100000000
    4 1/2"Steel, WoodPortable Disc SandersBlueVery Fine46555A58300000000
    5"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBlueVery Fine46555A26100000000
    6"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBlueVery Fine46555A29100000000
    7"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBlueVery Fine46555A33100000000
    8"Steel, WoodPortable Disc Sanders, Stationary Disc SandersBlueVery Fine46555A361000000000
     

    Clog-Resistant Hook and Loop Vacuum Sanding Discs

    Image of Product. Sanding Disc. Front orientation. Contains Inset. Sanding Discs. Clog Resistant, Hook and Loop Mount, For Vacuum Sanders, Discs.

    Sanding Disc

    Image of Product. Backup Pad Protector. Back orientation. Backup Pad Protector.

    Backup Pad Protector

    Our most clog-resistant discs. These have a slick coating and a mesh backing to clear dust and prevent buildup that can dull the abrasive. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair with a compatible backup pad and sander.
    Cloth Mesh Abrasive Backing—Perforations allow debris through for low-dust sanding when paired with a vacuum sander.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Backup Pad Protector—Discs that include protectors shield your backup pads from dust and debris, minimizing wear and extending their life.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Abrasive Backing
    Material
    For Use On
    For Use With
    Includes
    Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    3"AnyCloth MeshSteel, WoodPortable Disc Sanders, Vacuum SandersBackup Pad Protector80129132N24000000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—8014195A110000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—8014195A310000
     
    For Smooth Finish
    3"AnyCloth MeshSteel, WoodPortable Disc Sanders, Vacuum SandersBackup Pad Protector120129132N2500000
    3"AnyCloth MeshSteel, WoodPortable Disc Sanders, Vacuum SandersBackup Pad Protector150129132N2600000
    3"AnyCloth MeshSteel, WoodPortable Disc Sanders, Vacuum SandersBackup Pad Protector180129132N2700000
    3"AnyCloth MeshSteel, WoodPortable Disc Sanders, Vacuum SandersBackup Pad Protector220129132N2800000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—10014195A120000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—12014195A130000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—15014195A140000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—18014195A150000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—22014195A160000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—10014195A320000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—12014195A330000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—15014195A340000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—18014195A350000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—22014195A360000
     
    For Extra-Smooth Finish
    3"AnyCloth MeshSteel, WoodPortable Disc Sanders, Vacuum SandersBackup Pad Protector320129132N2900000
    3"AnyCloth MeshSteel, WoodPortable Disc Sanders, Vacuum SandersBackup Pad Protector400129132N3100000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—24014195A170000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—32014195A180000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—40014195A190000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—24014195A370000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—32014195A380000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—40014195A390000
     
    For Polished Finish
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—60014195A210000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—80014195A220000
    5"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—100014195A230000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—60014195A410000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—80014195A420000
    6"AnyCloth MeshSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders—100014195A430000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"Any5/16"-24
    		15,0004724A102000000
    6"Any5/16"-24
    		15,0004724A10100000
     

    Quick-Change Flap Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Quick-Change Flap Sanding Discs.
    Image of Specification. Front orientation. Contains Border. TR. Flap Discs.
    Image of Specification. Front orientation. Contains Border. TS. Flap Discs.

    TR

    TS

    Image of Specification. Front orientation. Contains Border. X-Lock. Flap Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    X-Lock

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Control sanding pressure more easily than with standard discs. The overlapping flaps conform to bumps and contours for even sanding and a consistent finish. As the top layer of abrasive wears away, a new layer is exposed, so these last longer than discs without flaps. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    X-Lock—An X-shaped arbor hole quickly clicks into and out of X-Lock grinders without a wrench or flange nut. Also compatible with 7/8" arbors, these discs don't need a backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Cannot Be Sold To—Some discs cannot be sold outside of the United States due to export restrictions.
    Each
    Package
    Dia.
    Mfr. Equiv. Model
    Abrasive
    Material
    Abrasive Backing
    Material
    Backing Plate
    Material
    Disc
    Shape
    For Use On
    Cannot Be Sold To
    Choose a Grit
    Each
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"3M Roloc, Norton Speed-Lok TRAluminum OxideClothPlasticFlatSteel, Wood—36, 40, 60, 808231A41100000108231A412000000
    2"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatSteel, Wood—36, 40, 60, 808228A4110000108228A41200000
    3"3M Roloc, Norton Speed-Lok TRAluminum OxideClothPlasticFlatSteel, Wood—36, 40, 60, 808231A4310000108231A43200000
    3"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatSteel, Wood—36, 40, 60, 808228A8110000108228A81200000
     
    For Smooth Finish
    2"3M Roloc, Norton Speed-Lok TRAluminum OxideClothPlasticFlatSteel, Wood—1208231A1110000108231A10100000
    2"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatSteel, Wood—1208228A410000108228A40100000
    3"3M Roloc, Norton Speed-Lok TRAluminum OxideClothPlasticFlatSteel, Wood—1208231A2110000108231A20100000
    3"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatSteel, Wood—1208228A810000108228A80100000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    2"3M TSM, Norton Speed-Lok TSZirconia AluminaClothPlasticFlatSteel, Wood—36, 40, 60, 808228A2030000108228A21300000
     
    For Smooth Finish
    2"3M TSM, Norton Speed-Lok TSZirconia AluminaClothPlasticFlatSteel, Wood—1208228A1120000108228A13200000
     
    X-Lock Style Quick-Change Connector
     
    For Rough Finish
    4 1/2"X-LockZirconia AluminaClothFiberglassAngledSteel, WoodOutside United States40, 60, 808228A20500000————0
    4 1/2"X-LockZirconia AluminaClothPlasticFlatSteel, WoodOutside United States40, 60, 808228A20400000————0
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TS Style Quick-Change Connector
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
     

    Fast-Cutting Aggressive-Removal Quick-Change Sanding Discs

    Image of Product. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. Sanding Discs. Fast-Cutting Aggressive-Removal Quick-Change Sanding Discs.

    Precision-Shaped Ceramic Alumina

    Image of Specification. Front orientation. TR. Fast Cut, Aggressive Removal, Discs.

    TR

    Power through hard metals to remove a lot of material quickly. These discs have precision-shaped abrasive that cuts easily and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. A stiff fiber backing handles heavier pressure than cloth- or paper-backed discs. With a twist or snap connector, you can swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv.
    Model
    Mfr.
    Series
    For Use On
    Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood36107473N11000000
    2"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood60107473N1200000
    2"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood80107473N1300000
    3"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood36107473N1500000
    3"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood60107473N1600000
    3"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood80107473N1700000
     
    For Smooth Finish
    2"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood120107473N1400000
    3"Ceramic AluminaFiber3M Roloc3M CubitronAluminum, Copper, Nickel, Stainless Steel, Steel, Wood120107473N1800000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     

    Clog-Resistant Arbor-Mount Sanding Discs

    Image of Product. Unthreaded Arbor Hole. Front orientation. Unthreaded Arbor Hole. Clog-Resistant Arbor-Mount Sanding Discs.
    Image of Product. Threaded Arbor Hole. Front orientation. Threaded Arbor Hole. Clog-Resistant Arbor-Mount Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Unthreaded Arbor

    Hole

    Threaded Arbor Hole

    Flat

    Spend more time sanding and less time replacing clogged discs. A coating prevents dust and debris buildup that can wear out the abrasive. These discs fit over your tool’s arbor for the most stable mounting and require a backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Each
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Choose a Grit
    1-9
    10-Up
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders36, 60, 8046725A8010000000000
    4 1/2"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders24, 36, 50, 60, 8046725A90100000000
    5"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders36, 60, 8046725A80300000000
    5"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders16, 24, 36, 50, 60, 8046725A50200000000
    7"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders36, 60, 8046725A80500000000
    7"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders16, 24, 36, 50, 60, 8046725A50300000000
    9 1/8"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders24, 36, 60, 8046725A5400000000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders12046725A81600000000
    4 1/2"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders12046725A91600000000
    5"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders12046725A82600000000
    5"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders12046725A3600000000
    7"—5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders12046725A83600000000
    7"7/8"—UnthreadedFiberFlatSteel, WoodAngle Grinders12046725A3900000000
     

    Quick-Change Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Sanding Discs. Quick-Change Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Specification. Front orientation. TR. Discs.

    TR

    Prevent clogging and smearing when sanding soft materials. The abrasive won’t trap particles, so these discs reduce heat to stay sharp. Twist or snap the connector on the back to swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    1"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber50258237A641000000
    1 1/2"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber36, 50258237A71700000
    2"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber36, 40, 50, 60, 80108237A72300000
    3"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber36, 40, 50, 60, 80108237A72500000
     
    For Smooth Finish
    3/4"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber100, 120258237A71400000
    1"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber100, 120, 180258237A73600000
    1 1/2"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber120258237A71100000
    2"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber100, 120, 180108237A72400000
    3"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber120108237A93100000
    4"Silicon CarbideCloth3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber100, 120108237A72800000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    3/4"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A71000000000000000000
    1"3M Roloc, Norton Speed-Lok TR1/4"40,000Medium46465A72000000000000000
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
    4"3M Roloc, Norton Speed-Lok TR1/4"15,000Medium46325A94000000000000000
     

    Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Contains Inset. Sanding Discs. Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Flaps expose fresh grit as you sand hard metals for longer life than standard discs. The sharp and durable abrasive removes material evenly. Mount these discs onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass15,00040, 60, 808264A8100000
    4"5/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass15,00040, 60, 804750A1100000
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 50, 60, 808264A8200000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 804750A2200000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 50, 60, 808264A8300000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 804750A3100000
    5"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 50, 608264A8400000
    5"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 804750A4200000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 50, 60, 808264A8500000
    5"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 804750A5100000
    6"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass10,00036, 40, 50, 60, 808264A8600000
    7"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,50036, 608264A8700000
    7"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,50036, 40, 60, 804750A6200000
    7"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,50036, 40, 50, 60, 808264A7800000
    7"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,50036, 40, 60, 804750A7100000
     
    For Smooth Finish
    4"5/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass15,0001208264A9550000
    4"5/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass15,0001204750A1200000
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001208264A96800000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001204750A2800000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001208264A96200000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001204750A3800000
    5"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001208264A98200000
    5"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001204750A4800000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001208264A97500000
    5"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,0001204750A4900000
    6"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass10,0001208264A98800000
    7"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,5001208264A94500000
    7"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,5001204750A6800000
    7"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,5001208264A99500000
    7"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,5001204750A8200000
     

    Long-Life Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Unthreaded Arbor Hole. Front orientation. Unthreaded Arbor Hole. Long-Life Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals.
    Image of Product. Threaded Arbor Hole. Front orientation. Threaded Arbor Hole. Long-Life Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Unthreaded Arbor Hole

    Threaded Arbor Hole

    Flat

    With a premium abrasive, these discs stay sharp longer than other arbor-mount discs for hard metals. Fit them over your tool’s arbor for the most stable mounting. Discs require a backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36546375A89000000
    4 1/2"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 80546375A5800000
    5"—5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36546375A9100000
    5"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 80546375A6800000
    7"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 80546375A7800000
    9"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50546375A3800000
     
    For Smooth Finish
    4 1/2"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders120546375A62200000
    5"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders120546375A71900000
    7"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders120546375A81900000
     

    Long-Life Quick-Change Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Long-Life Quick-Change Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Front orientation. TS. Discs.

    TS

    Image of Specification. Front orientation. TR. Discs.

    TR

    With a premium abrasive, these discs stay sharp longer than other quick-change discs for hard metals. They’re coated to prevent heat buildup, so tough materials won't wear out the abrasive prematurely. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium36254212A111000000
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium50254212A12100000
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium60254212A13100000
    1 1/2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium80254212A14100000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium36104212A21100000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium50104212A22100000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium60104212A23100000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium80104212A24100000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium36104212A31100000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium50104212A32100000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium60104212A33100000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, Titanium80104212A34100000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium60254212A13200000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium36104212A21200000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium50104212A22200000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium60104212A23200000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium80104212A24200000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium36104212A31200000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium50104212A32200000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium60104212A33200000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttIron, Nickel, Stainless Steel, Steel, Titanium80104212A34200000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TS Style Quick-Change Connector
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
     

    Nylon Mesh Quick-Change Sanding Disc Assortments

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Disc Assortments.
    Image of Specification. Front orientation. TR. Surface Conditioning, Sold as Assortments, Discs.
    Image of Specification. Front orientation. TS. Surface Conditioning, Sold as Assortments, Discs.

    TR

    TS

    Produce consistent finishes with a variety of discs and backup pads. Also known as non-woven or surface-conditioning discs, they have a clog-resistant nylon mesh backing and come in abrasives from coarse to very fine. They compensate for uneven sanding pressure, so they’re good for everything from heavy rust removal to paint prep. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Includes
    No. of
    Pieces
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    For Use With
    Nylon Mesh Grade
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish, For Smooth Finish, For Extra-Smooth Finish
    2", 3"24 Discs (4 each of Coarse, Medium, and Very Fine in 2" and 3" Diameters)
    Two Backup Pads (one each in 2" and 3" diameters) with 1/4" Shank    		26Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGrinders for Bits and BursCoarse, Medium, Very Fine4799A92000000
     
    TS Style Quick-Change Connector
     
    For Rough Finish, For Smooth Finish, For Extra-Smooth Finish
    2", 3"24 Discs (4 each of Coarse, Medium, and Very Fine in 2" and 3" Diameters)
    Two Backup Pads (one each in 2" and 3" diameters) with 1/4" Shank    		26Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodGrinders for Bits and BursCoarse, Medium, Very Fine4799A9100000
     

    Arbor-Mount Flap Sanding Discs for Masonry, Ceramics, and Composites

    Image of Product. Front orientation. Sanding Discs. Arbor-Mount Flap Sanding Discs for Masonry, Ceramics, and Composites.
    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Flaps with silicon carbide abrasive cut through challenging materials and last longer than standard discs. As you work, the flaps expose new grit for steady material removal and even finishes. Mount discs onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Grit
    Max. Rotation
    Speed, rpm
    Each
    Silicon Carbide Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass8015,3004609A116000000
    4 1/2"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass8013,0004609A14100000
    5"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass8012,0004609A16100000
    7"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass808,6004609A15100000
     
    For Smooth Finish
    4"5/8"—UnthreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass22015,3004609A21400000
    4 1/2"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass22013,0004609A24300000
    5"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass12012,0004609A16200000
    7"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass2208,6004609A25300000
     
    For Extra-Smooth Finish
    4"5/8"—UnthreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass32015,3004609A11300000
    4 1/2"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass32013,0004609A14400000
    5"7/8"—UnthreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass32012,0004609A17400000
     
    For Polished Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle GrindersFiberglass60013,0004609A14600000
     

    Clog-Resistant Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Unthreaded Arbor Hole. Front orientation. Unthreaded Arbor Hole. Clog-Resistant Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals.
    Image of Product. Threaded Arbor Hole. Front orientation. Threaded Arbor Hole. Clog-Resistant Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Unthreaded Arbor

    Hole

    Threaded Arbor Hole

    Flat

    Get the most out of your discs when sanding stainless steel and hard metals. A coating prevents dust and debris buildup that can wear out the abrasive prematurely. Discs fit over your tool’s arbor for the most stable mounting and require a backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Each
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Choose a Grit
    1-9
    10-Up
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders364319A3110000000000
    4 1/2"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders364319A1200000000
    5"—5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders364319A32100000000
    5"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders244319A1600000000
    7"—5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders364319A33100000000
    7"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders36, 804319A2900000000
     
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 8046725A8400000000
    4 1/2"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 8046725A7100000000
    5"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 8046725A7200000000
    7"7/8"—UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 8046725A7300000000
     

    Fast-Cutting Nylon Mesh Hook and Loop Sanding Discs

    Image of Product. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. Sanding Discs. Fast-Cutting Nylon Mesh Hook and Loop Sanding Discs.

    Precision-Shaped Ceramic Alumina

    Remove material quickly without sacrificing a consistent finish. These discs have precision-shaped abrasive that cuts through hard metals and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Also known as non-woven or surface-conditioning discs, their nylon mesh backing resists clogging and compensates for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. The hook-and-loop backing lets you switch grits without waste, unlike adhesive-backed discs. Pair them with a compatible sanding tool or backup pad.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Mfr.
    Series
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Each
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc SandersBlackExtra Coarse7915N1100000
    4"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc SandersBrownCoarse7915N210000
    4 1/2"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc SandersBlackExtra Coarse7915N120000
    4 1/2"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc SandersBrownCoarse7915N220000
    5"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBlackExtra Coarse7915N130000
    5"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBrownCoarse7915N230000
    6"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBlackExtra Coarse7915N1400000
    6"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBrownCoarse7915N2400000
    7"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBlackExtra Coarse7915N1500000
    7"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBrownCoarse7915N2500000
     
    For Smooth Finish
    4"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc SandersGreenFine7915N410000
    4"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc SandersRedMedium7915N310000
    4 1/2"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc SandersGreenFine7915N420000
    4 1/2"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc SandersRedMedium7915N320000
    5"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersGreenFine7915N430000
    5"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersRedMedium7915N330000
    6"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersGreenFine7915N440000
    6"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersRedMedium7915N340000
    7"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersGreenFine7915N4500000
    7"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersRedMedium7915N3500000
     
    For Extra-Smooth Finish
    4"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc SandersBlueVery Fine7915N510000
    4 1/2"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc SandersBlueVery Fine7915N520000
    5"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBlueVery Fine7915N530000
    6"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBlueVery Fine7915N540000
    7"3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc SandersBlueVery Fine7915N5500000
     

    Fast-Cutting Adhesive-Back Sanding Discs

    Image of Product. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. Sanding Discs. Fast-Cutting Adhesive-Back Sanding Discs.

    Precision-Shaped Ceramic Alumina

    The precision-shaped abrasive on these discs cuts quickly and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Mfr.
    Series
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    5"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders36106658N11000000
    5"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders60106658N1700000
    5"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders80106658N1800000
    6"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders36106658N1500000
    6"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders60106658N1400000
    6"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders80106658N1300000
     
    For Smooth Finish
    5"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders120106658N1600000
    6"3M CubitronClothAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders120106658N1200000
     

    Nylon Mesh Quick-Change Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Front orientation. TR. Discs, Surface Conditioning.

    TR

    Image of Specification. Front orientation. TR+. Discs, Surface Conditioning.

    TR+

    Produce a consistent finish to prepare hard metal surfaces for coating, painting, and plating. The sharp, durable abrasive on these discs cuts through tough materials without dulling quickly. Also known as non-woven or surface-conditioning discs, they’re made of nylon mesh that resists clogging and flexes to compensate for uneven sanding pressure. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"Silicon Carbide3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse8236A1100000
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumBlueCoarse8236A440000
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumOrangeExtra Coarse8236A4200000
    3"Silicon Carbide3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse8236A120000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumBlueCoarse8236A450000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumOrangeExtra Coarse8236A4300000
    4"Silicon Carbide3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumBlackExtra Coarse8236A4100000
     
    For Smooth Finish
    2"Ceramic Alumina3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumMaroonMedium8236A460000
    3"Ceramic Alumina3M Roloc, Norton Speed-Lok TRIron, Nickel, Stainless Steel, Steel, TitaniumMaroonMedium8236A470000
     
    TR+ Style Quick-Change Connector
     
    For Rough Finish
    4"Ceramic AluminaNorton Speed-Lok TR+Iron, Nickel, Stainless Steel, Steel, TitaniumOrangeExtra Coarse8236A2100000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
    4"3M Roloc, Norton Speed-Lok TR1/4"15,000Medium46325A94000000000000000
     
    TR+ Style Quick-Change Connector
    4"Norton Speed-Lok TR+1/4"8,000Medium8236A34000000000000000
     

    Fast-Cutting Hook and Loop Vacuum Sanding Discs

    Image of Product. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. Sanding Discs. Fast-Cutting Hook and Loop Vacuum Sanding Discs.

    Precision-Shaped Ceramic Alumina

    Remove material faster than other hook-and-loop discs while vacuum holes let dust clear away. These discs have precision-shaped abrasive that cuts easily and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Choose the hole configuration that matches your backup pad and vacuum sander.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Mfr.
    Series
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    5"Any3M CubitronPaperAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80258101N11000000
    6"Any3M CubitronPaperAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80258101N1500000
     
    For Smooth Finish
    5"Any3M CubitronPaperAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders120, 180, 220258101N11200000
    6"Any3M CubitronPaperAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders120, 180, 220258101N11600000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"55/16"-24
    		10,0004724A94000000
    5"85/16"-24
    		10,0004724A9500000
    5"Any5/16"-24
    		15,0004724A10200000
    6"65/16"-24
    		10,0004724A4900000
    6"Any5/16"-24
    		15,0004724A10100000
     

    Long-Life Hook and Loop Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Long-Life Hook and Loop Sanding Discs.
    With tougher abrasive than other hook-and-loop discs, these discs stay sharp longer. The backing makes them reusable, so you can switch grits while avoiding the waste of adhesive-backed discs. Pair with a compatible sanding tool or backup pad (sold separately).
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders80258261A19000000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders80258261A4200000
     
    For Smooth Finish
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220258261A15400000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders100, 120, 150, 180, 220258261A16300000
     
    For Extra-Smooth Finish
    5"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320, 400258261A15500000
    6"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders320, 400258261A16400000
     

    Arbor-Mount Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Unthreaded Arbor Hole. Front orientation. Unthreaded Arbor Hole. Arbor-Mount Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Product. Threaded Arbor Hole. Front orientation. Threaded Arbor Hole. Arbor-Mount Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Unthreaded Arbor Hole

    Threaded Arbor Hole

    Flat

    The coated abrasive resists buildup from soft metals and nonmetals that would clog other discs. These discs fit over your tool’s arbor for the most stable mounting and require a backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders24, 36, 80104699A871000000
    4 1/2"7/8"—UnthreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders24, 36, 50, 60, 80104699A83100000
    5"7/8"—UnthreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders24, 36, 50, 60, 80104699A84100000
    7"7/8"—UnthreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders24, 36, 80104699A85100000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders120104699A51600000
    4 1/2"7/8"—UnthreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders120104699A11600000
    5"7/8"—UnthreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders120104699A21600000
    7"7/8"—UnthreadedFiberFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle Grinders120104699A31600000
     

    Long-Life Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Contains Inset. Sanding Discs. Long-Life Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    With more abrasive than other flap discs for hard metals, these last 30-40% longer. The overlapping flaps expose new grit as you work for steady material removal and even finishes. Mount discs on your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Plastic Backing Plate—Trim the flaps as they wear to extend the life of the disc.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 804750A8400000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,000408264A88100000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 604750A850000
    5"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,000604750A7870000
    5"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00040, 604750A870000
     
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,000608264A91200000
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,000808264A91100000
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic12,00040, 60, 801339A2400000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 801339A1800000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,000608264A92200000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,000808264A92100000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic12,00040, 60, 801339A2500000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 801339A1900000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic12,00040, 60, 801339A2600000
    5"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass12,00036, 40, 60, 801339A2100000
    7"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic8,50040, 60, 801339A2700000
    7"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8,50036, 40, 60, 801339A2200000
     

    Nylon Mesh Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. A. Front orientation. Style A. Surface Conditioning, Arbor Mount, For Stainless Steel and Hard Metals, Discs.
    Image of Product. B. Front orientation. Style B. Surface Conditioning, Arbor Mount, For Stainless Steel and Hard Metals, Discs.

    A

    B

    Image of Product. C. Front orientation. Style C. Surface Conditioning, Arbor Mount, For Stainless Steel and Hard Metals, Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    C

    Flat

    Create a consistent finish on stainless steel and other hard metal surfaces before painting and coating. With a nylon mesh backing instead of cloth or paper, these discs resist clogging and flex to compensate for uneven sanding pressure. They’re also known as non-woven or surface-conditioning discs. Mount directly onto your tool’s arbor for stable, controlled sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Style A—Sand your workpiece using the face of the disc. Coarse and medium discs require a backup pad (sold separately).
    Styles B and C—These discs have a reinforced arbor hole for extra support. You can use both their face and edge to sand workpieces. They don’t require a backup pad.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Sanding Discs
    Optional
    Wheel Arbors
    Style
    Dia.
    Thk.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Disc
    Shape
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Each
    Silicon Carbide Abrasive
     
    For Rough Finish
    B4 1/2"1/2"7/8"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlackExtra Coarse11,0008236A13000000———0
     
    Ceramic Alumina Abrasive
     
    For Rough Finish
    A4"1/2"1/2"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersOrangeExtra Coarse8,0004748A202000004568A2300000
    A4 1/2"1/4"7/8"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlueCoarse12,0004748A2050000———0
    A5"1/4"7/8"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlueCoarse12,0004748A20600000———0
    A6"1/2"1/2"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersOrangeExtra Coarse4,0004748A204000004568A230000
    B5"1/2"7/8"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersOrangeExtra Coarse11,0008236A1700000———0
    B7"1/2"7/8"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersOrangeExtra Coarse8,0008236A1900000———0
    C4 1/2"1/2"—5/8"-11
    		ThreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersOrangeExtra Coarse12,0008236A1400000———0
    C5"1/2"—5/8"-11
    		ThreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersOrangeExtra Coarse11,0008236A1600000———0
    C7"1/2"—5/8"-11
    		ThreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersOrangeExtra Coarse8,0008236A1800000———0
     
    For Smooth Finish
    A4 1/2"1/4"7/8"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersMaroonMedium12,0004748A2070000———0
    A5"1/4"7/8"—UnthreadedFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersMaroonMedium12,0004748A20800000———0
     

    Nylon Mesh Sanding Discs with Shank

    Image of Product. Front orientation. Flat Disc. Discs, Shank Mount.
    Image of Product. Front orientation. Wave Disc. Discs.
    Secure the shank into the collet or chuck of your tool and you’re ready to go. Also known as non-woven or surface-conditioning discs, their nylon mesh backing resists clogging and flexes to compensate for uneven sanding pressure. They produce consistent finishes, so they’re good for everything from heavy rust removal and deburring to blending and paint prep.
    Flat Disc—The standard shape.
    Wave Disc—A seamless stack of thin discs, these eliminate the visible transition lines that flat and flap discs can leave behind. They’re good for polishing and finishing flat surfaces.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Wd.
    Shank
    Dia.
    Abrasive
    Material
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Flat Disc
     
    For Rough Finish
    2"1"1/4"Silicon CarbideSteel, WoodDrillsBlackExtra Coarse16,00046925A61000000
    3"1/2"1/4"Silicon CarbideSteel, WoodDrillsBlackExtra Coarse10,5004718A2100000
    3"1"1/4"Silicon CarbideSteel, WoodDrillsBlackExtra Coarse10,5004718A2200000
    4"1/2"1/4"Silicon CarbideSteel, WoodDrillsBlackExtra Coarse8,0004718A2300000
    4"1"1/4"Silicon CarbideSteel, WoodDrillsBlackExtra Coarse8,0004718A2400000
     
    For Smooth Finish
    1"3/8"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium20,0004365A410000
    1"1/2"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium20,0004365A420000
    1 1/2"7/8"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium13,0004365A430000
    1 1/2"1"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium13,0004365A440000
    2"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium12,00046925A3200000
    2 3/8"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium12,00046925A7200000
    3"1/2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium8,00046925A260000
    3"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium8,00046925A2300000
    3"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium8,00046925A7400000
    4"1/2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium6,00046925A6200000
    4"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium6,00046925A3600000
    5"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium4,00046925A3800000
     
    For Extra-Smooth Finish
    1"3/8"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine20,0004365A310000
    1"1/2"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine20,0004365A320000
    1 1/2"7/8"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine13,0004365A330000
    1 1/2"1"1/8"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine13,0004365A340000
    2"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine12,00046925A420000
    2"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine12,00046925A5200000
    2 3/8"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine12,00046925A7100000
    2 3/8"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine12,00046925A6900000
    3"1/2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine8,00046925A250000
    3"1/2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine8,00046925A240000
    3"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine8,00046925A2200000
    3"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine8,00046925A2100000
    3"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine8,00046925A7300000
    3"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine8,00046925A6800000
    4"1/2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine6,00046925A630000
    4"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine6,00046925A4600000
    4"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine6,00046925A5600000
    5"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine4,00046925A4800000
    5"1"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine4,00046925A5800000
     
    Wave Disc
     
    For Smooth Finish
    3"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium7,5004365A11100000
    4"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonMedium6,0004365A11200000
     
    For Extra-Smooth Finish
    3"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine7,5004365A11300000
    3"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine7,50046925A11100000
    4"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonFine6,0004365A11400000
    4"2"1/4"Aluminum OxideSteel, WoodDrills, Grinders for Bits and BursMaroonVery Fine6,00046925A11200000
     

    Quick-Change Sanding Discs for Masonry, Ceramics, and Composites

    Image of Product. Front orientation. Sanding Discs. Quick-Change Sanding Discs for Masonry, Ceramics, and Composites.
    Image of Specification. Front orientation. TR. Discs.

    TR

    The hardest of all abrasives, diamond is the best choice for extremely hard materials. These discs cut quickly and wear slowly when sanding masonry, ceramics, and composites. Their unique abrasive pattern prevents material buildup and leaves a consistent finish. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Grit
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone604696A11000000
    3"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone604696A2100000
     
    For Smooth Finish
    2"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone1204696A1200000
    2"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone1804696A1300000
    3"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone1204696A2200000
    3"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone1504696A2300000
     
    For Extra-Smooth Finish
    2"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone4004696A1400000
    3"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone4004696A2400000
     
    For Polished Finish
    2"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone8004696A1500000
    2"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone18004696A1600000
    3"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone8004696A2500000
    3"DiamondCloth3M Roloc, Norton Speed-Lok TRBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone18004696A2600000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     

    Hook and Loop Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Hook and Loop Sanding Discs for Stainless Steel and Hard Metals.
    The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Polished Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2000504611A453000000
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2400504611A45400000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2000104611A46700000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2400104611A46800000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders2000104611A48200000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders2000104611A49600000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2000104611A51800000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2400104611A51900000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2000104611A53300000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2400104611A53400000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders2000104611A54700000
     
    Silicon Carbide Abrasive
     
    For Smooth Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders220504611A44100000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders220104611A45500000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders220104611A46900000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders220104611A48400000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders220104611A49800000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders220104611A52100000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders220104611A53500000
     
    For Extra-Smooth Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders240, 320504521A52200000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders240, 320104521A53200000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders320104611A47500000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders320104611A48900000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders240, 320104521A56200000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders240, 320104521A57200000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders320104611A54100000
     
    For Polished Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders500504611A44700000
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders800504611A44800000
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1000504611A44900000
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1200504611A45100000
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1600504611A45200000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders500104611A46200000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders800104611A46300000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1000104611A46400000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1200104611A46500000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1600104611A46600000
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1000104611A47800000
    4 1/2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders1000104611A49300000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders500104611A50500000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders800104611A50600000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1000104611A50700000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A50800000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1600104611A50900000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders500104611A52700000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders800104611A52800000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1000104611A52900000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A53100000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1600104611A53200000
    7"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1000104611A54400000
     

    Adhesive-Back Sanding Discs for Masonry, Ceramics, and Composites

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Sanding Discs for Masonry, Ceramics, and Composites.
    The hardest of all abrasives, diamond is the best choice for extremely hard materials. These discs cut quickly and wear slowly when sanding masonry, ceramics, and composites. Press them onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Each
    Diamond Abrasive
     
    For Rough Finish
    2"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrinders for Bits and Burs, Portable Disc Sanders603499A111000000
    5"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders603499A211000000
    6"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders603499A311000000
    8"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders603499A411000000
     
    For Smooth Finish
    2"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrinders for Bits and Burs, Portable Disc Sanders1203499A11200000
    2"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrinders for Bits and Burs, Portable Disc Sanders1503499A11300000
    5"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders1203499A212000000
    5"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders1503499A213000000
    6"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders1203499A312000000
    6"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders1503499A313000000
    8"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders1203499A412000000
    8"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders1503499A413000000
     
    For Extra-Smooth Finish
    2"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrinders for Bits and Burs, Portable Disc Sanders4003499A11400000
    5"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders4003499A21400000
    6"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders4003499A314000000
    8"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders4003499A414000000
     
    For Polished Finish
    2"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrinders for Bits and Burs, Portable Disc Sanders8003499A11500000
    2"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrinders for Bits and Burs, Portable Disc Sanders16003499A11600000
    5"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders8003499A21500000
    5"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders16003499A21600000
    6"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders8003499A315000000
    6"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders16003499A316000000
    8"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders8003499A415000000
    8"ClothBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StonePortable Disc Sanders, Stationary Disc Sanders16003499A416000000
     

    Arbor-Mount Flap Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Contains Inset. Sanding Discs. Arbor-Mount Flap Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Coated abrasive flaps resist buildup from soft metals and nonmetals that would clog and prematurely wear other discs. As the top layer of abrasive wears away, a new layer is exposed so these last longer than discs without flaps. Mount them onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina/Zirconia Alumina Blend Abrasive—Combine the fast cutting of ceramic alumina with the toughness of zirconia alumina under heavy pressure.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Ceramic Alumina/Zirconia Alumina Blend Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass15,00040, 60, 801384A2300000
    4"5/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass15,00060, 801384A140000
    4 1/2"—5/8"-11
    		ThreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00036, 40, 60, 801384A2400000
    4 1/2"—5/8"-11
    		ThreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00036, 40, 50, 60, 801384A1500000
    4 1/2"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00036, 40, 60, 801384A2500000
    4 1/2"7/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00036, 40, 50, 60, 801384A1600000
    5"7/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00036, 60, 801384A1800000
     
    For Smooth Finish
    4"5/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass15,0001201384A1670000
    4"5/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass15,0001201384A1150000
    4 1/2"—5/8"-11
    		ThreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,0001201384A12800000
    4 1/2"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,0001201384A17400000
    4 1/2"7/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,0001201384A12200000
    5"7/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,0001201384A13500000
     

    Aggressive-Removal Arbor-Mount Flap Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Aggressive-Removal Arbor-Mount Flap Sanding Discs.
    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Cut through more material in one sweep—the aluminum backing plate handles heavier pressure than standard discs. The overlapping flaps reveal new grit as you work for steady material removal and even finishes. These discs fit over your tool’s arbor for the most stable mounting.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedClothAngledSteel, WoodAngle GrindersAluminum
    		15,00036, 40, 60, 804384A21700000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersAluminum
    		13,00036, 40, 60, 804384A23700000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersAluminum
    		13,00036, 40, 60, 804384A2270000
    5"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersAluminum
    		12,00036, 604384A2470000
    7"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersAluminum
    		8,60036, 40, 60, 804384A26700000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersAluminum
    		13,0001204384A23600000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersAluminum
    		13,0001204384A2260000
     

    Fast-Cutting Nylon Mesh Arbor-Mount Sanding Discs

    Image of Specification. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. 3M Cubitron Series. Arbor Mount, Discs, Surface Conditioning, Fast Cut.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Precision-Shaped Ceramic Alumina

    Flat

    Remove material quickly without sacrificing a consistent finish. These discs have precision-shaped abrasive that cuts easily through hard metals and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Also known as non-woven or surface-conditioning discs, their flexible mesh backing resists clogging and adapts to uneven sanding pressure. They're good for everything from heavy rust removal to paint prep. Discs mount onto your tool’s arbor and require a backup pad.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Flat Disc—The standard shape.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Arbor Hole
    Dia.
    Arbor
    Hole
    Disc
    Shape
    Mfr.
    Series
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4"5/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlackExtra Coarse15,0008089N1100000
    4"5/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersMaroonCoarse15,0008089N150000
    4 1/2"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlackExtra Coarse13,3008089N120000
    4 1/2"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersMaroonCoarse13,3008089N160000
    5"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlackExtra Coarse12,0008089N130000
    5"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersMaroonCoarse12,0008089N170000
    7"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlackExtra Coarse8,6008089N1400000
    7"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersMaroonCoarse8,6008089N1800000
     
    For Smooth Finish
    4"5/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersRedMedium15,0008089N190000
    4 1/2"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersRedMedium13,3008089N210000
    5"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersRedMedium12,0008089N220000
    7"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersRedMedium8,6008089N2300000
     
    For Extra-Smooth Finish
    4"5/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlueVery Fine15,0008089N280000
    4"5/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersGreenFine15,0008089N240000
    4 1/2"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlueVery Fine13,3008089N290000
    4 1/2"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersGreenFine13,3008089N250000
    5"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlueVery Fine12,0008089N310000
    5"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersGreenFine12,0008089N260000
    7"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersBlueVery Fine8,6008089N3200000
    7"7/8"UnthreadedFlat3M CubitronAluminum, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersGreenFine8,6008089N2700000
     

    Nylon Mesh Arbor-Mount Sanding Discs

    Image of Product. Aluminum Oxide (Unthreaded Arbor Hole). Front orientation. Aluminum Oxide Abrasive. Arbor Mount, Discs, Surface Conditioning, Unthreaded Arbor Hole.
    Image of Product. Silicon Carbide (Threaded Arbor Hole). Front orientation. Silicon Carbide Abrasive. Arbor Mount, Discs, Surface Conditioning, Threaded Arbor Hole.

    Aluminum Oxide

    (Unthreaded Arbor

    Hole)

    Silicon Carbide

    (Threaded Arbor

    Hole)

    Image of Product. Silicon Carbide (Unthreaded Arbor Hole). Front orientation. Silicon Carbide Abrasive. Arbor Mount, Discs, Surface Conditioning, Unthreaded Arbor Hole.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Silicon Carbide

    (Unthreaded Arbor

    Hole)

    Flat

    Achieve a more consistent finish to prepare surfaces for painting and coating. With a nylon mesh backing instead of cloth or paper, these discs resist clogging and flex to compensate for uneven sanding pressure. They’re also known as non-woven or surface-conditioning discs. Mount directly onto your tool’s arbor for stable, controlled sanding without a backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Sanding Discs
    Optional
    Wheel Arbors
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Disc
    Shape
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Each
    Aluminum Oxide Abrasive
     
    For Smooth Finish
    6"1/4"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonMedium3,60046935A43000004568A2100000
    6"1/2"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonMedium3,60046935A1600004568A230000
    8"1/4"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonMedium2,70046935A5300004568A210000
    8"1/2"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonMedium2,70046935A1900004568A230000
     
    For Extra-Smooth Finish
    6"1/4"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonFine3,60046935A4200004568A210000
    6"1/4"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonVery Fine3,60046935A4100004568A210000
    6"1/2"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonFine3,60046935A1500004568A230000
    6"1/2"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonVery Fine3,60046935A1400004568A230000
    8"1/4"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonFine2,70046935A5200004568A210000
    8"1/4"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonVery Fine2,70046935A5100004568A210000
    8"1/2"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonFine2,70046935A1800004568A230000
    8"1/2"—UnthreadedFlatSteel, WoodBench Grinders, Pedestal Grinders, Straight GrindersMaroonVery Fine2,70046935A1700004568A230000
     
    Silicon Carbide Abrasive
     
    For Rough Finish
    4"5/8"—UnthreadedFlatSteel, WoodAngle GrindersBlackExtra Coarse12,4004748A3100000———0
    4 1/2"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBlackExtra Coarse12,0004748A3600000———0
    4 1/2"7/8"—UnthreadedFlatSteel, WoodAngle GrindersBlackExtra Coarse11,0004748A2800000———0
    5"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBlackExtra Coarse11,0004748A3700000———0
    5"7/8"—UnthreadedFlatSteel, WoodAngle GrindersBlackExtra Coarse9,8004748A3400000———0
    7"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBlackExtra Coarse8,0004748A3800000———0
    7"7/8"—UnthreadedFlatSteel, WoodAngle GrindersBlackExtra Coarse7,0004748A3500000———0
     

    Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Discs.

    Angled

    The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. They fit over your tool’s arbor for the most stable mounting and require a backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"7/8"UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 60, 80546375A56000000
    4 1/2"7/8"UnthreadedFiberAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders3614516A150000
    5"7/8"UnthreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36546375A6600000
    5"7/8"UnthreadedFiberAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders3614516A160000
     

    Nylon Mesh Hook and Loop Sanding Disc Assortments

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Hook and Loop Sanding Disc Assortments.
    Produce consistent finishes with a variety of discs and the backup pads. Also known as non-woven or surface-conditioning discs, they have a clog-resistant nylon mesh backing and come in abrasives from coarse to very fine. Discs compensate for uneven sanding pressure, so they’re good for everything from heavy rust removal and deburring to blending and paint prep. The hook-and-loop backing lets you switch grits without waste, unlike adhesive-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Includes
    No. of
    Pieces
    For Use On
    For Use With
    Nylon Mesh Grade
    Each
    Aluminum Oxide Abrasive
    2", 3"24 Discs (4 each of Coarse, Medium, and Very Fine in 2" and 3" Diameters)
    Two Backup Pads (one each in 2" and 3" diameters) with 1/4" Shank    		26Steel, WoodGrinders for Bits and BursCoarse, Medium, Very Fine4799A88000000
     

    Fast-Cutting Hook and Loop Sanding Discs

    Image of Attribute. Precision-Shaped Ceramic Alumina. Front orientation. Contains Annotated, Inset. Sanding Discs. Fast-Cutting Hook and Loop Sanding Discs.

    Precision-Shaped Ceramic Alumina

    With precision-shaped abrasive, these discs cut quickly and reduce heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Discs have a slick coating that prevents dust and debris from building up. A hook-and-loop makes them reusable—unlike adhesive-back discs, which are one and done. Pair with a compatible sanding tool or backup pad.
    Plastic Film Abrasive Backing—Thin but strong, film resists tearing and moisture.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Mfr.
    Series
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    5"3M CubitronPlastic FilmAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders80258106N11000000
     
    For Smooth Finish
    5"3M CubitronPlastic FilmAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders120, 180, 220258106N11200000
     
    For Extra-Smooth Finish
    5"3M CubitronPlastic FilmAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders240, 320258106N11500000
     

    Nylon Mesh Arbor-Mount Flap Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Arbor-Mount Flap Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Nylon mesh flaps compensate for uneven pressure to create a consistent finish. Also known as non-woven or surface-conditioning discs, these resist clogging and are often used to prepare surfaces for painting and coating. As the top layer of abrasive wears away, a new layer is exposed, so they last longer than discs without flaps. They fit over your tool’s arbor for the most stable mounting.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersFiberglassBrownCoarse13,3004661A111000000
    4 1/2"—5/8"-11
    		ThreadedAngledSteel, WoodAngle GrindersFiberglassBrown, RedCoarse13,3004661A2900000
    4 1/2"7/8"—UnthreadedFlatSteel, WoodAngle GrindersFiberglassBrownCoarse13,3004661A11200000
    4 1/2"7/8"—UnthreadedAngledSteel, WoodAngle GrindersFiberglassBrown, RedCoarse13,3004661A2300000
    5"—5/8"-11
    		ThreadedAngledSteel, WoodAngle GrindersFiberglassBrown, RedCoarse12,2004661A3300000
    5"7/8"—UnthreadedAngledSteel, WoodAngle GrindersFiberglassBrown, RedCoarse12,2004661A2600000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersFiberglassMaroonMedium13,3004661A11300000
    4 1/2"—5/8"-11
    		ThreadedAngledSteel, WoodAngle GrindersFiberglassMaroonMedium13,3004661A3100000
    4 1/2"7/8"—UnthreadedFlatSteel, WoodAngle GrindersFiberglassMaroonMedium13,3004661A11400000
    4 1/2"7/8"—UnthreadedAngledSteel, WoodAngle GrindersFiberglassMaroonMedium13,3004661A2200000
    5"—5/8"-11
    		ThreadedAngledSteel, WoodAngle GrindersFiberglassMaroonMedium12,2004661A3400000
    5"7/8"—UnthreadedAngledSteel, WoodAngle GrindersFiberglassMaroonMedium12,2004661A2700000
     
    For Extra-Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersFiberglassBlueVery Fine13,3004661A11700000
    4 1/2"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersFiberglassGreenFine13,3004661A11600000
    4 1/2"—5/8"-11
    		ThreadedAngledSteel, WoodAngle GrindersFiberglassBlueFine13,3004661A3200000
    4 1/2"7/8"—UnthreadedFlatSteel, WoodAngle GrindersFiberglassBlueVery Fine13,3004661A11800000
    4 1/2"7/8"—UnthreadedFlatSteel, WoodAngle GrindersFiberglassGreenFine13,3004661A11500000
    4 1/2"7/8"—UnthreadedAngledSteel, WoodAngle GrindersFiberglassBlueFine13,3004661A2100000
    5"—5/8"-11
    		ThreadedAngledSteel, WoodAngle GrindersFiberglassBlueFine12,2004661A3500000
    5"7/8"—UnthreadedAngledSteel, WoodAngle GrindersFiberglassBlueFine12,2004661A2800000
     

    Arbor-Mount Sanding Discs for Masonry, Ceramics, and Composites

    Image of Product. Front orientation. Sanding Discs. Arbor-Mount Sanding Discs for Masonry, Ceramics, and Composites.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Flat

    Power through the hardest materials with silicon carbide abrasive. These discs also have tough rubber backing that handles the pressure needed to level concrete or shape stone. They mount onto your tool’s arbor and are stiff enough that you don't need a backup pad.
    Flat Disc—The standard shape.
    Dia.
    Arbor Hole
    Dia.
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Max. Rotation
    Speed, rpm
    Choose
    a Grit
    Each
    Silicon Carbide Abrasive
     
    For Rough Finish
    4 1/2"7/8"UnthreadedRubber
    		FlatBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle Grinders13,30016, 24, 364751A51000000
    5"7/8"UnthreadedRubber
    		FlatBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle Grinders12,00016, 24, 364751A5200000
    7"7/8"UnthreadedRubber
    		FlatBricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneAngle Grinders8,50016, 24, 364751A5300000
     

    Fast-Cutting Quick-Change Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. Sanding Discs. Fast-Cutting Quick-Change Sanding Discs for Stainless Steel and Hard Metals.

    Precision-Shaped Ceramic Alumina

    Image of Specification. Front orientation. TR. Discs, Fast Cut.

    TR

    Image of Specification. Front orientation. TS. Discs, Fast Cut.

    TS

    The precision-shaped abrasive on these discs quickly penetrates hard metals and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Twist or snap the connector on the back to swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    Mfr. Series
    For Use On
    Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TR3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium60108092N102000000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TR3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium80108092N10400000
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRNorton RazorStarIron, Nickel, Stainless Steel, Steel, Titanium36108092N11300000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TR3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium60108092N10800000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TR3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium80108092N11100000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TRNorton RazorStarIron, Nickel, Stainless Steel, Steel, Titanium36108092N11500000
     
    For Smooth Finish
    2"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TR3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium120108092N10600000
    3"Ceramic AluminaCloth3M Roloc, Norton Speed-Lok TR3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium120108092N11200000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium60108092N10100000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium80108092N10300000
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttNorton RazorStarIron, Nickel, Stainless Steel, Steel, Titanium36108092N11400000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium60108092N10700000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium80108092N10900000
    3"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttNorton RazorStarIron, Nickel, Stainless Steel, Steel, Titanium36108092N11600000
     
    For Smooth Finish
    2"Ceramic AluminaCloth3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt3M CubitronIron, Nickel, Stainless Steel, Steel, Titanium120108092N10500000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TS Style Quick-Change Connector
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Soft6879N12000000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Medium4701A7200000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,000Hard6879N11000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
     

    Adhesive-Back Vacuum Sanding Discs

    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. Adhesive-Back Vacuum Sanding Discs.
    Image of Product. For Six-Hole Vacuum Sanders. Front orientation. For 6 Vacuum Holes. Adhesive-Back Vacuum Sanding Discs.

    For Five-Hole

    Vacuum Sanders

    For Six-Hole

    Vacuum Sanders

    Pair these discs with a vacuum sander to keep your workspace clean. Dust is drawn away through the holes instead of floating into the air or building up on the abrasive. Choose the hole configuration that matches your backup pad and vacuum sander. Press discs onto tools or pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Pkg. of 25
    Pkg. of 100
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders804707A420000004707A11000000
    6"63/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80———04707A2100000
     
    For Smooth Finish
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 2204707A12600000———0
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders120, 150, 180, 220———04707A12200000
    6"63/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 150, 180, 2204707A128000004707A12400000
     
    For Extra-Smooth Finish
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320, 4004707A13600000———0
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320———04707A1900000
    6"63/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320, 4004707A13800000———0
    6"63/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320———04707A2900000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Adhesive Back.
    Image of Product. Back. Back orientation. Backup Pads. Adhesive Back.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Adhesive-Back Discs
    5"55/16"-24
    		13,0004709A51000000
    6"65/16"-24
    		13,0004709A5200000
     

    Hook and Loop Vacuum Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Hook and Loop Vacuum Sanding Discs for Stainless Steel and Hard Metals.
    Cut through hard metals faster than other discs and remove debris as you work. These discs have extra-sharp abrasive as well as holes that let dust clear into a vacuum sander to prevent mess and buildup. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and sander.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    5"AnyPaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80256832N101000000
    6"AnyPaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders40256832N10500000
    6"AnyPaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80256832N10600000
     
    For Smooth Finish
    5"AnyPaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders120, 180, 220256832N20100000
    6"AnyPaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders120, 180, 220256832N20200000
     
    For Extra-Smooth Finish
    6"AnyPaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320, 400256832N20300000
     
    Accessories for Sanding Discs
    Cushioning Pads
    Image of Product. Front orientation. Sanding Disc Cushioning Pads. Hook and Loop Mount.
    Dia.
    Thk.
    Material
    Color
    For No. of
    Vacuum Holes
    Each
    Clog Resistant
    5"1/2"FoamBlackAny6691N103000000
    6"1/2"FoamBlackAny6691N10400000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"55/16"-24
    		10,0004724A94000000
    5"85/16"-24
    		10,0004724A9500000
    5"Any5/16"-24
    		15,0004724A10200000
    6"65/16"-24
    		10,0004724A4900000
    6"Any5/16"-24
    		15,0004724A10100000
     

    Arbor-Mount Flap Sanding Discs for Corners

    Image of ProductInUse. Front orientation. Contains Border. Sanding Discs. Arbor-Mount Flap Sanding Discs for Corners.
    Image of Product. Front orientation. Sanding Discs. Arbor-Mount Flap Sanding Discs for Corners.
    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Angled-edge flaps reach farther into corners than discs with standard flaps. The flaps overlap and reveal new grit as you work for steady material removal and even finishes. Mount these discs onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass13,30040, 60, 804326A129000000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass13,30060, 804326A1190000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass13,3001204326A12500000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass13,3001204326A1150000
     
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass13,30036, 40, 60, 804326A16900000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass13,30036, 40, 60, 804326A1590000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass13,3001204326A16500000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass13,3001204326A1550000
     

    Cool-Sanding Arbor-Mount Flap Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Cool-Sanding Arbor-Mount Flap Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Prevent overheating or discoloring work surfaces. The overlapping flaps on these discs alternate between abrasive and a lubricant that minimizes heat buildup. As the top layer of abrasive wears away, a new layer is exposed so these last longer than discs without flaps. They fit over your tool’s arbor for the most stable mounting.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Grit
    Max. Rotation
    Speed, rpm
    Each
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass4013,3004481A351000000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass6013,3004481A35200000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass4013,3004481A39100000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass6013,3004481A39200000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass4013,3004481A33100000
    4 1/2"7/8"—UnthreadedClothFlatSteel, WoodAngle GrindersFiberglass6013,3004481A33200000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass4013,3004481A37100000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersFiberglass6013,3004481A37200000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass4012,2004481A40100000
    7"—5/8"-11
    		ThreadedClothFlatSteel, WoodAngle GrindersFiberglass408,6004481A36300000
    7"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersFiberglass408,6004481A40300000
     

    Nylon Mesh Multimount Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Multimount Sanding Discs.
    Pair the same disc with different tools to produce consistent finishes. Use the hole to mount on an arbor or the hook and loop to attach to a backup pad. Also known as non-woven or surface-conditioning discs, these have a nylon mesh backing that resists clogging and flexes to compensate for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. You’ll need a compatible arbor-mount backup pad or hook-and-loop backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"Steel, WoodAngle GrindersBrownCoarse8,0006664N10100000
    5"Steel, WoodAngle GrindersBrownCoarse7,0006664N1020000
     

    See-Through Arbor-Mount Sanding Discs

    Image of Product. Front orientation. Sanding Discs. See-Through Arbor-Mount Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Flat

    Check on your surface as you work to avoid over-sanding expensive or delicate workpieces. These discs have three holes you can see through and one for mounting onto your tool's arbor. They require a compatible see-through backup pad (sold separately).
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina/Zirconia Alumina Blend Abrasive—Combine the fast cutting of ceramic alumina with the toughness of zirconia alumina under heavy pressure.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Each
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Choose a Grit
    1-9
    10-Up
    Ceramic Alumina/Zirconia Alumina Blend Abrasive
     
    For Rough Finish
    4 1/2"5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders24, 36, 50, 60, 8046795A670000000000
    5"5/8"-11
    		ThreadedFiberFlatSteel, WoodAngle Grinders24, 36, 50, 60, 8046795A6800000000
     
    Backup Pads
    Image of Product. Front orientation. Backup Pads. Arbor Mount.
    For Disc
    Dia.
    Max. Speed,
    rpm
    Includes
    Each
    For Arbor Mount Disc
    4 1/2"13,000Disc Nut46795A24000000
    5"13,000Disc Nut46795A2500000
     

    Nylon Mesh Quick-Change Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Specification. Front orientation. TR. Discs, Surface Conditioning.

    TR

    Image of Specification. Front orientation. TR+. Discs, Surface Conditioning.

    TR+

    Get a consistent finish and prevent buildup when sanding soft materials. The abrasive won’t trap particles, so these discs stay sharp longer and generate less heat. Also known as non-woven or surface-conditioning discs, they’re made of nylon mesh that resists clogging and flexes to compensate for uneven sanding pressure. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"Silicon Carbide3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, RubberBlackExtra Coarse8236A2200000
    3"Silicon Carbide3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, RubberBlackExtra Coarse8236A2300000
     
    TR+ Style Quick-Change Connector
     
    For Rough Finish
    4"Silicon CarbideNorton Speed-Lok TR+Aluminum, Brass, Bronze, Copper, Plastic, RubberBlackExtra Coarse8236A2400000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TR+ Style Quick-Change Connector
    4"Norton Speed-Lok TR+1/4"8,000Medium8236A34000000000000000
     

    Hook and Loop Vacuum Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. Hook and Loop Vacuum Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Product. For Six-Hole Vacuum Sanders. Front orientation. For 6 Vacuum Holes. For Vacuum Sanders, Hook and Loop Mount, Discs.

    For Five-Hole

    Vacuum Sanders

    For Six-Hole

    Vacuum Sanders

    Keep workspaces and discs clear of debris from soft materials. The abrasive resists gummy buildup and the holes let dust clear into your vacuum sander to keep these discs sharp longer. A hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Smooth Finish
    5"53/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders180104611A825000000
    6"63/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders180104611A84100000
     
    For Extra-Smooth Finish
    5"53/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320, 400104521A64100000
    6"63/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320, 400104521A63100000
     
    For Polished Finish
    5"53/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders800, 1600, 3000104521A64200000
    6"63/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders800, 1600, 3000104521A63200000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"55/16"-24
    		10,0004724A94000000
    6"65/16"-24
    		10,0004724A4900000
     

    Long-Life Nylon Mesh Arbor-Mount Sanding Discs

    Image of Product. Unthreaded Arbor Hole. Front orientation. Sanding Discs. Long-Life Nylon Mesh Arbor-Mount Sanding Discs.

    Unthreaded Arbor Hole

    Image of Product. Threaded Arbor Hole. Front orientation. Threaded Arbor Hole. Discs, Surface Conditioning, Long Life, Arbor Mount.

    Threaded Arbor Hole

    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Flat

    Nylon mesh densely packed with abrasive lasts longer and creates a more consistent finish than other arbor-mount discs. These discs resist clogging and compensate for uneven sanding pressure, so they are good for everything from heavy removal to paint prep. They’re also known as non-woven or surface-conditioning discs. Mount directly onto your tool’s arbor for stable, controlled sanding without a backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Disc
    Shape
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBlueCoarse12,0008108N101000000
    4 1/2"7/8"—UnthreadedFlatSteel, WoodAngle GrindersBlueCoarse12,0008108N10200000
     
    For Smooth Finish
    4 1/2"7/8"—UnthreadedFlatSteel, WoodAngle GrindersBlueMedium12,0008108N10300000
     

    Cool-Sanding Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Cool-Sanding Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Remove material from stainless steel and other hard metals without overheating or discoloring your work surface. The overlapping abrasive flaps on these discs are lubricated to minimize heat buildup. As the top layer of abrasive wears away, a new layer is exposed so these last longer than discs without flaps. Mount them onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Grit
    Max. Rotation
    Speed, rpm
    Each
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4013,3004481A616000000
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004481A61500000
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8013,3004481A61400000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4013,3004481A61300000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004481A61200000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8013,3004481A61100000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4013,3004481A6260000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004481A6250000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8013,3004481A6240000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4013,3004481A6230000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004481A6220000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8013,3004481A6210000
    5"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4012,2004481A63600000
    5"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004481A63500000
    5"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4012,2004481A63300000
    5"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004481A63200000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4012,2004481A64600000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004481A64500000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8012,2004481A64400000
    5"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass4012,2004481A64300000
    5"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004481A64200000
    5"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass8012,2004481A64100000
     

    Quick-Change Flap Sanding Discs for Corners on Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Quick-Change Flap Sanding Discs for Corners on Stainless Steel and Hard Metals.
    Image of Specification. Front orientation. Contains Border. TR. Flap Discs.

    TR

    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Angled-edge flaps reach farther into corners than discs with standard flaps. These discs have sharp, durable abrasive that cuts through stainless steel, nickel, and other hard metals. The flaps overlap for consistent material removal and even finishes. As the top layer of abrasive wears away, a new layer is exposed, so these last longer than discs without flaps. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Mfr. Equiv. Model
    Abrasive
    Material
    Abrasive Backing
    Material
    Backing Plate
    Material
    Disc
    Shape
    For Use On
    Choose a Grit
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium36, 40, 60, 808231A42100000
    3"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium36, 40, 60, 808231A4410000
     
    For Smooth Finish
    2"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium1208231A1310000
    3"3M Roloc, Norton Speed-Lok TRZirconia AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium1208231A2310000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     

    Aggressive-Removal Quick-Change Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Sanding Discs. Aggressive-Removal Quick-Change Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Specification. Front orientation. TR. Aggressive Removal, Discs.

    TR

    Image of Specification. Front orientation. TS. Aggressive Removal, Discs.

    TS

    Strip away more soft material in a single pass without clogging these discs. They have a tougher backing than standard discs to handle more pressure. The abrasive has a slick coating to prevent debris from building up, so you’ll get clean finishes on aluminum, plastic, and rubber. Twist or snap the connector to swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive
    Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    Grit
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber602547035A412000000
    2"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber802547035A41300000
    3"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber362547035A42100000
    3"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber602547035A42200000
    3"Aluminum OxideFiber3M Roloc, Norton Speed-Lok TRAluminum, Brass, Bronze, Copper, Plastic, Rubber802547035A42300000
     
    TS Style Quick-Change Connector
     
    For Rough Finish
    3"Aluminum OxideFiberNorton Speed-Lok TS, Standard Abrasive SocAttAluminum, Brass, Bronze, Copper, Plastic, Rubber362547035A44100000
    3"Aluminum OxideFiberNorton Speed-Lok TS, Standard Abrasive SocAttAluminum, Brass, Bronze, Copper, Plastic, Rubber602547035A44200000
    3"Aluminum OxideFiberNorton Speed-Lok TS, Standard Abrasive SocAttAluminum, Brass, Bronze, Copper, Plastic, Rubber802547035A44300000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TS Style Quick-Change Connector
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Soft6879N14000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Medium4701A73000000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"20,000Hard6879N13000000000000000
     

    Fast-Cutting Arbor-Mount Sanding Discs

    Image of Product. Unthreaded Arbor Hole. Front orientation. Unthreaded Arbor Hole. Fast-Cutting Arbor-Mount Sanding Discs.
    Image of Product. Threaded Arbor Hole. Front orientation. Threaded Arbor Hole. Fast-Cutting Arbor-Mount Sanding Discs.

    Unthreaded Arbor Hole

    Threaded Arbor Hole

    Image of Specification. Precision-Shaped Ceramic Alumina. Front orientation. ZoomedIn view. Contains Inset. Norton RazorStar Series. Fast-Cutting Arbor-Mount Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Precision-Shaped Ceramic

    Alumina

    Flat

    Remove material more quickly than other arbor-mount discs. These have precision-shaped abrasive that cuts easily and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. These discs fit over your tool’s arbor for the most stable mounting and require a backup pad.
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    Mfr. Series
    For Use On
    For Use With
    Grit
    Each
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedFiberFlatNorton RazorStarAluminum, Copper, Nickel, Stainless Steel, SteelAngle Grinders366713N1500000
    4 1/2"7/8"—UnthreadedFiberFlatNorton RazorStarAluminum, Copper, Nickel, Stainless Steel, SteelAngle Grinders366713N110000
    5"—5/8"-11
    		ThreadedFiberFlatNorton RazorStarAluminum, Copper, Nickel, Stainless Steel, SteelAngle Grinders366713N160000
    5"7/8"—UnthreadedFiberFlatNorton RazorStarAluminum, Copper, Nickel, Stainless Steel, SteelAngle Grinders366713N120000
    7"—5/8"-11
    		ThreadedFiberFlatNorton RazorStarAluminum, Copper, Nickel, Stainless Steel, SteelAngle Grinders366713N170000
    7"7/8"—UnthreadedFiberFlatNorton RazorStarAluminum, Copper, Nickel, Stainless Steel, SteelAngle Grinders366713N130000
    9 1/8"7/8"—UnthreadedFiberFlatNorton RazorStarAluminum, Copper, Nickel, Stainless Steel, SteelAngle Grinders366713N1400000
     

    Flexible-Edge Quick-Change Sanding Discs

    Image of ProductInUse. Front orientation. Sanding Discs. Flexible-Edge Quick-Change Sanding Discs.
    Image of Specification. Front orientation. TS. Discs.

    TS

    Image of Specification. Front orientation. TP. Discs.

    TP

    Avoid marring or gouging workpieces when sanding rounded edges and curved surfaces. These discs have an extremely flexible outer edge for even pressure around contours. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Aluminum
    Oxide Abrasive
    Zirconia
    Alumina Abrasive
    Dia.
    Mfr. Equiv. Model
    For Use On
    Abrasive Backing
    Material
    Grit
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    TS Style Quick-Change Connector
     
    For Rough Finish
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth601047045A724000000104698A859000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth801047045A72500000104698A86100000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth601047045A73100000104698A86400000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth801047045A73200000————0
     
    For Smooth Finish
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth100————0104698A86200000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth1201047045A72700000————0
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth1801047045A72800000————0
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth100————0104698A86600000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodCloth1801047045A73500000————0
     
    TP Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Merit Power-Lock Type I, Norton TY Power-Lock Type ISteel, WoodCloth602547045A9200000————0
    3"Merit Power-Lock Type I, Norton TY Power-Lock Type ISteel, WoodCloth601047045A9400000————0
    3"Merit Power-Lock Type I, Norton TY Power-Lock Type ISteel, WoodCloth801047045A1900000————0
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    1-9
    10-49
    50-Up
    TS Style Quick-Change Connector
    1 1/2", 2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,0004701A94000000000000000000
    3", 4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt1/4"30,0004701A95000000000000000
     
    TP Style Quick-Change Connector
    1", 1 1/2"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"40,00047045A84000000000000000
    3", 4"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"30,00047045A86000000000000000
     

    Floor Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Floor Sanding Discs.
    Smooth out floors using a commercial floor-buffing machines. The slotted hole makes installation easy—just line up the center of the disc with your machine and push into place.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Silicon Carbide Abrasive—The best choice for sanding concrete floors. You can also use them on wood floors, but they’ll wear out quicker than ceramic alumina discs.
    Ceramic Alumina Abrasive—The best choice for sanding wood floors, and no risk of color transfer. They won’t dull as fast as silicon carbide discs because their grit particles continuously fracture to create fresh, sharp cutting edges. However, they are not sharp enough to sand concrete floors.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Center
    Hole
    Silicon Carbide Abrasive
    Ceramic
    Alumina Abrasive
    Dia.
    Grit
    Abrasive Backing
    Material
    For Use With
    Style
    Dia.
    For Use On
    Each
    For Use
    On
    Each
    For Rough Finish
    15"20Cloth, PaperFloor-Buffing MachinesSlotted2"Concrete, Stone, Wood47305A24400000————0
    16"20Cloth, PaperFloor-Buffing MachinesSlotted2"Concrete, Stone, Wood47305A2540000————0
    16"24PaperFloor-Buffing MachinesSlotted2"————0Wood47305A117000000
    16"36PaperFloor-Buffing MachinesSlotted2"Concrete, Stone, Wood47305A2530000Wood47305A11800000
    16"80PaperFloor-Buffing MachinesSlotted2"Concrete, Stone, Wood47305A2510000Wood47305A11900000
    17"20Cloth, PaperFloor-Buffing MachinesSlotted2"Concrete, Stone, Wood47305A1110000————0
    17"36PaperFloor-Buffing MachinesSlotted2"Concrete, Stone, Wood47305A11200000————0
    17"80PaperFloor-Buffing MachinesSlotted2"Concrete, Stone, Wood47305A11300000Wood47305A12300000
     

    Fast-Cutting Clog-Resistant Hook and Loop Vacuum Sanding Discs

    Image of Product. Precision-Shaped Ceramic Alumina. Front orientation. Contains Inset. Sanding Discs. Clog Resistant, Discs, Fast Cut, Hook and Loop Mount, For Vacuum Sanders.

    Precision-Shaped Ceramic Alumina

    Sand quickly while capturing more dust than other vacuum discs. These discs have a precision-shaped abrasive that cuts easily and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Discs have mesh backing to clear dust and prevent buildup that can dull the abrasive. A hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair with a compatible backup pad and sander.
    Cloth Mesh Abrasive Backing—Perforations allow debris through for low-dust sanding when paired with a vacuum sander.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Mfr.
    Series
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Smooth Finish
    6"Any3M CubitronCloth MeshAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders180256560N14000000
     
    For Extra-Smooth Finish
    6"Any3M CubitronCloth MeshAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders240256560N1200000
    6"Any3M CubitronCloth MeshAluminum, Copper, Nickel, Stainless Steel, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320256560N1300000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    6"65/16"-24
    		10,0004724A49000000
    6"Any5/16"-24
    		15,0004724A10100000
     

    Long-Life Adhesive-Back Vacuum Sanding Discs

    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. Adhesive Back, For Vacuum Sanders, Discs.
    Image of Product. For Six-Hole Vacuum Sanders. Front orientation. For 6 Vacuum Holes. Adhesive Back, For Vacuum Sanders, Discs.

    For Five-Hole

    Vacuum Sanders

    For Six-Hole

    Vacuum Sanders

    With a tough abrasive, these discs stay sharp longer than other vacuum sanding discs. They’re coated to prevent buildup and premature wear and have holes for drawing dust away with a vacuum sander. Choose the hole configuration that matches your backup pad and vacuum sander. Press discs onto tools or pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Rough Finish
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders8010047805A53000000
    6"63/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders8010047805A5400000
     
    For Smooth Finish
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 180, 22010047805A12200000
    6"63/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders100, 120, 180, 22010047805A12400000
     
    For Extra-Smooth Finish
    5"53/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320, 40010047805A13200000
    6"63/8"PaperSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders320, 40010047805A13400000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Adhesive Back.
    Image of Product. Back. Back orientation. Backup Pads. Adhesive Back.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Adhesive-Back Discs
    5"55/16"-24
    		13,0004709A51000000
    6"65/16"-24
    		13,0004709A5200000
     

    Trimmable Arbor-Mount Flap Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Trimmable Arbor-Mount Flap Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Use every inch of these sanding discs. The soft plastic backing plate can be trimmed as the flaps wear down, so you won't have to replace the disc until all the abrasive is gone. To sand contoured and irregular surfaces, adjust how much the flaps overhang the backing plate. Discs mount onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose
    a Grit
    Each
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteelAngle GrindersPlastic13,30040, 60, 804216A15000000
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersPlastic13,30040, 60, 804216A11500000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersPlastic13,30040, 60, 804216A12500000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersPlastic12,20040, 60, 804216A13500000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersPlastic13,3001204216A11400000
    4 1/2"7/8"—UnthreadedClothAngledSteel, WoodAngle GrindersPlastic13,3001204216A12400000
    5"—5/8"-11
    		ThreadedClothAngledSteel, WoodAngle GrindersPlastic12,2001204216A13400000
     

    Arbor-Mount Flap Sanding Discs for Inside Corner Welds

    Image of ProductInUse. Front orientation. Contains Border. Sanding Discs. Arbor-Mount Flap Sanding Discs for Inside Corner Welds.
    Image of Product. Front orientation. Sanding Discs. Arbor-Mount Flap Sanding Discs for Inside Corner Welds.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Smooth out welds in tight corners with discs that hit them at the perfect angle. The abrasive flaps wrap around the disc’s outer edge to reach and sand right-angle (fillet) welds. As the top layer of abrasive wears away, a new layer is exposed, so these discs last longer than discs without flaps. Mount them onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use
    On
    For Use With
    Backing Plate
    Material
    Grit
    Max. Rotation
    Speed, rpm
    Each
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteelAngle GrindersFiberglass4013,3004867A14000000
    4 1/2"—5/8"-11
    		ThreadedClothFlatSteelAngle GrindersFiberglass4013,3004867A1900000
    4 1/2"7/8"—UnthreadedClothFlatSteelAngle GrindersFiberglass4013,3004867A1100000
    4 1/2"7/8"—UnthreadedClothFlatSteelAngle GrindersFiberglass4013,3004867A1300000
    5"—5/8"-11
    		ThreadedClothFlatSteelAngle GrindersFiberglass4012,2004867A1800000
    5"—5/8"-11
    		ThreadedClothFlatSteelAngle GrindersFiberglass4012,2004867A3600000
    5"7/8"—UnthreadedClothFlatSteelAngle GrindersFiberglass4012,2004867A1500000
    5"7/8"—UnthreadedClothFlatSteelAngle GrindersFiberglass4012,2004867A1700000
     

    See-Through Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. See-Through Arbor-Mount Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Flat

    Cut through hard metals and avoid over-sanding surfaces. These discs have tough abrasive that won’t dull quickly and holes for keeping an eye on your workpiece. They mount onto your tool’s arbor and require a compatible see-through backup pad (sold separately).
    Fiber Abrasive Backing—The stiff backing lets you apply maximum force on flat or angled surfaces without the disc collapsing or tearing.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Each
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Choose a Grit
    1-9
    10-Up
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 60, 8046795A740000000000
    5"5/8"-11
    		ThreadedFiberFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle Grinders24, 36, 50, 6046795A7500000000
     
    Backup Pads
    Image of Product. Front orientation. Backup Pads. Arbor Mount.
    For Disc
    Dia.
    Max. Speed,
    rpm
    Includes
    Each
    For Arbor Mount Disc
    4 1/2"13,000Disc Nut46795A24000000
    5"13,000Disc Nut46795A2500000
     

    Quick-Change Flap Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Quick-Change Flap Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Front orientation. Contains Border. TR. Flap Discs.

    TR

    Overlapping flaps with sharp, durable abrasive create an even finish on hard metals. These discs conform to bumps and contours for consistent pressure and material removal. As the top layer of abrasive wears away, a new layer is exposed, so they last longer than discs without flaps. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Mfr. Equiv. Model
    Abrasive
    Material
    Abrasive Backing
    Material
    Backing Plate
    Material
    Disc
    Shape
    For Use On
    Choose a Grit
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium36, 40, 60, 808103N20400000
    3"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium36, 40, 60, 808103N20500000
     
    For Smooth Finish
    2"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium1208103N1140000
    3"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium1208103N1190000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     

    See-Through Nylon Mesh Arbor-Mount Sanding Discs

    Image of Product. Front orientation. Sanding Discs. See-Through Nylon Mesh Arbor-Mount Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Discs.

    Flat

    Keep a careful eye on surfaces as you create consistent finishes. Also known as non-woven or surface-conditioning discs, these have a nylon mesh backing that resists clogging and flexes to compensate for uneven sanding pressure. They’re good for everything from heavy cleaning to light finishing. Discs mount onto your tool’s arbor and require a compatible see-through backup pad (sold separately).
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Each
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Disc
    Shape
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    1-9
    10-Up
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBrownCoarse46795A330000000000
    5"5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBrownCoarse46795A4300000000
     
    For Smooth Finish
    4 1/2"5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersMaroonMedium46795A3200000000
    5"5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersMaroonMedium46795A4200000000
     
    For Extra-Smooth Finish
    4 1/2"5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBlueVery Fine46795A3100000000
    5"5/8"-11
    		ThreadedFlatSteel, WoodAngle GrindersBlueVery Fine46795A4100000000
     
    Backup Pads
    Image of Product. Front orientation. Backup Pads. Arbor Mount.
    For Disc
    Dia.
    Max. Speed,
    rpm
    Includes
    Each
    For Arbor Mount Disc
    4 1/2"13,000Disc Nut46795A24000000
    5"13,000Disc Nut46795A2500000
     

    Arbor-Mount Flap Sanding Discs for Inside Corner Welds on Stainless Steel and Hard Metals

    Image of ProductInUse. Front orientation. Contains Border. Sanding Discs. Arbor-Mount Flap Sanding Discs for Inside Corner Welds on Stainless Steel and Hard Metals.
    Image of Product. Front orientation. Sanding Discs. Arbor-Mount Flap Sanding Discs for Inside Corner Welds on Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Get the angle you need to smooth out corner welds on hard metals. The abrasive flaps wrap around the disc’s outer edge to reach and sand right-angle (fillet) welds. They expose new grit as you work for steady material removal and even finishes. Mount discs onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Grit
    Max. Rotation
    Speed, rpm
    Each
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004867A22000000
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004867A2400000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004867A2100000
    4 1/2"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6013,3004867A2300000
    5"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004867A2600000
    5"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004867A2800000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004867A2500000
    5"7/8"—UnthreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass6012,2004867A2700000
     

    Nylon Mesh Hook and Loop Sanding Discs for Curved Surfaces

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Hook and Loop Sanding Discs for Curved Surfaces.
    Create a consistent finish on curved and delicate surfaces. Since these discs don’t have a reinforced backing like other nylon mesh discs, they’re more flexible and less aggressive. Also known as non-woven or surface-conditioning discs, they resist clogging and compensate for uneven sanding pressure. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair with a compatible sanding tool or backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Each
    Aluminum Oxide Abrasive
     
    For Extra-Smooth Finish
    5"Steel, WoodPortable Disc Sanders, Stationary Disc SandersMaroonVery Fine6859N1200000
    6"Steel, WoodPortable Disc Sanders, Stationary Disc SandersMaroonVery Fine6859N110000
     

    Arbor-Mount Flap Sanding Discs for Corners on Stainless Steel and Hard Metals

    Image of ProductInUse. Front orientation. Contains Border. Sanding Discs. Arbor-Mount Flap Sanding Discs for Corners on Stainless Steel and Hard Metals.
    Image of Product. Front orientation. Sanding Discs. Arbor-Mount Flap Sanding Discs for Corners on Stainless Steel and Hard Metals.
    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    With angled flaps and a tough abrasive, these discs fit inside corners to remove material from hard metals. Their overlapping flaps expose new grit as you work for steady material removal and even finishes. Mount discs onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose a Grit
    Each
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass13,30036, 40, 60, 804326A21000000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersFiberglass13,30036, 40, 60, 804326A190000
     

    Nylon Mesh Hook and Loop Vacuum Sanding Discs

    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. For Vacuum Sanders, Hook and Loop Mount, Surface Conditioning, Discs.
    Image of Product. For Six-Hole Vacuum Sanders. Front orientation. For 6 Vacuum Holes. For Vacuum Sanders, Hook and Loop Mount, Surface Conditioning, Discs.

    For Five-Hole

    Vacuum Sanders

    For Six-Hole Vacuum

    Sanders

    Image of Product. For Eight-Hole Vacuum Sanders. Front orientation. For 8 Vacuum Holes. For Vacuum Sanders, Hook and Loop Mount, Surface Conditioning, Discs.

    For Eight-Hole

    Vacuum Sanders

    Create a consistent finish while keeping workspaces and discs clear of debris. Also known as non-woven or surface-conditioning discs, these are backed with nylon mesh that resists clogging and compensates for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. The holes let dust clear into your vacuum sander to prevent buildup on the abrasive. A hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and sander.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Each
    Aluminum Oxide Abrasive
     
    For Extra-Smooth Finish
    5"53/8"Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum SandersMaroonVery Fine7721N1300000
    5"83/8"Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum SandersBrownVery Fine7721N120000
    6"63/8"Steel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum SandersMaroonVery Fine7721N140000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"55/16"-24
    		10,0004724A94000000
    5"85/16"-24
    		10,0004724A9500000
    6"65/16"-24
    		10,0004724A4900000
     

    Nylon Mesh Sanding Discs with Shank for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Sanding Discs with Shank for Stainless Steel and Hard Metals.
    Image of Product. Front orientation. Flat Disc. Discs, Shank Mount.
    Ready to tighten into your tool’s collet or chuck, these discs prepare hard metal surfaces for coating, painting, and plating. Also known as non-woven or surface-conditioning discs, they're made of nylon mesh embedded with sharp abrasive. They resist clogging and flex for even sanding pressure and consistent finishes.
    Flat Disc—The standard shape.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Wd.
    Shank
    Dia.
    Abrasive
    Material
    For Use On
    For Use With
    Color
    Nylon Mesh
    Grade
    Max. Rotation
    Speed, rpm
    Each
    Flat Disc
     
    For Rough Finish
    4"1/2"1/4"Ceramic AluminaIron, Nickel, Stainless Steel, Steel, TitaniumDrills, Grinders for Bits and BursOrangeExtra Coarse8,0008150N11000000
    4"1"1/4"Ceramic AluminaIron, Nickel, Stainless Steel, Steel, TitaniumDrills, Grinders for Bits and BursOrangeExtra Coarse8,0008150N1200000
     

    Adhesive-Back Vacuum Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Vacuum Sanding Discs for Soft Metals, Plastic, and Rubber.
    Keep workspaces and discs clear of debris from soft materials. The abrasive resists buildup and the holes let dust clear into your vacuum sander to keep these discs sharp longer. Choose the hole configuration that matches your backup pad and vacuum sander. Press discs onto tools or pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Smooth Finish
    5"53/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders180104611A826000000
     
    For Extra-Smooth Finish
    5"53/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders400104611A83300000
     
    For Polished Finish
    5"53/8"ClothAluminum, Brass, Bronze, Copper, Plastic, RubberPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders800, 3000104521A68200000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Adhesive Back.
    Image of Product. Back. Back orientation. Backup Pads. Adhesive Back.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Adhesive-Back Discs
    5"55/16"-24
    		13,0004709A51000000
     

    Long-Life Arbor-Mount Flap Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Contains Inset. Sanding Discs. Long-Life Arbor-Mount Flap Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Work longer without changing discs when sanding soft metals and nonmetals. These have more flaps than standard flap discs for 30-40% more life and a slick coating that prevents dust and debris from building up. As you sand, the flaps expose new grit to remove material steadily and evenly. Mount discs onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose
    a Grit
    Each
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00040, 60, 801384A32000000
    4 1/2"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00040, 60, 801384A3300000
    5"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,00040, 60, 801384A3500000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,0001201384A35200000
    4 1/2"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,0001201384A33400000
    5"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass12,0001201384A33800000
     

    Cool-Sanding Arbor-Mount Flap Sanding Discs for Soft Metals, Plastic, and Rubber

    Image of Product. Front orientation. Sanding Discs. Cool-Sanding Arbor-Mount Flap Sanding Discs for Soft Metals, Plastic, and Rubber.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Avoid overheating or discoloring soft metal and nonmetal workpieces. The overlapping abrasive flaps on these discs are lubricated to minimize heat buildup. As you work, the flaps expose new grit for steady material removal and even finishes. Mount discs onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Grit
    Max. Rotation
    Speed, rpm
    Each
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass4013,3004481A431000000
    4 1/2"—5/8"-11
    		ThreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass6013,3004481A43200000
    4 1/2"—5/8"-11
    		ThreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass8013,3004481A43300000
    4 1/2"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass4013,3004481A41100000
    4 1/2"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass6013,3004481A41200000
    4 1/2"7/8"—UnthreadedClothFlatAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass8013,3004481A41300000
    4 1/2"7/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass4013,3004481A45100000
    4 1/2"7/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass6013,3004481A45200000
    4 1/2"7/8"—UnthreadedClothAngledAluminum, Brass, Bronze, Copper, Plastic, RubberAngle GrindersFiberglass8013,3004481A45300000
     

    Nylon Mesh Quick-Change Sanding Discs for Grounding Contact Points

    Image of ProductInUse. Side1 orientation. Exploded view. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Grounding Contact Points.
    Image of Product. Sanding Disc. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Grounding Contact Points.

    Sanding Disc

    Image of Product. Arbor. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Grounding Contact Points.

    Arbor

    Image of Specification. Front orientation. TS. Discs, Surface Conditioning.

    TS

    Ensure clean connections by removing paint, primer, and other contaminants from electrical grounding contact points. These discs mount to your tool with an arbor, also known as a mandrel (sold separately). The arbor’s tip pokes through the disc and fits into a drilled hole in the center of your contact point. As you sand, the tip acts as a guide to keep your tool from slipping out of the contact. Also known as non-woven or surface-conditioning discs, they're made of flexible nylon mesh to resist clogging and produce a consistent finish, even with uneven sanding pressure.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Sanding Discs
    Arbors with 1/4"
    Shank Dia.
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Pkg.
    Qty.
    Pkg.
    Each
    TS Style Quick-Change Connector
     
    For Smooth Finish
    5/8"Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttAluminum, Copper, SteelMaroonMedium108183N110000008183N12000000
     

    Trimmable Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Trimmable Arbor-Mount Flap Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    Image of Specification. Angled. Front orientation. Angled Disc. Flap Discs.

    Angled

    Sand hard metals, trim the disc, and then sand some more. These discs have sharp, durable abrasive with a slick coating that prevents dust and debris from building up. With a soft plastic backing plate, you can trim the flaps as they wear and only need to replace the disc when all the abrasive is gone. To sand contoured and irregular surfaces, adjust how much the flaps overhang the backing plate. Discs mount onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.
    Flat Disc—The standard shape.
    Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor Hole
    Thread Size
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose
    a Grit
    Each
    Aluminum Oxide Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,30040, 60, 804216A33000000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,30040, 60, 804216A3200000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,30040, 60, 804216A3100000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedClothFlatIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,3001204216A33400000
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,3001204216A32400000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,3001204216A31400000
     
    Ceramic Alumina Abrasive
     
    For Rough Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,30040, 60, 804216A21500000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,30040, 60, 804216A22500000
    5"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic12,20040, 60, 804216A23500000
     
    For Smooth Finish
    4 1/2"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,3001204216A21400000
    4 1/2"7/8"—UnthreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic13,3001204216A22400000
    5"—5/8"-11
    		ThreadedClothAngledIron, Nickel, Stainless Steel, Steel, TitaniumAngle GrindersPlastic12,2001204216A23400000
     

    Nylon Mesh Quick-Change Sanding Discs for Masonry, Ceramics, and Composites

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Masonry, Ceramics, and Composites.
    Image of Specification. Front orientation. TR. Discs, Surface Conditioning.

    TR

    Prepare the hardest materials for coating and painting by leaving a consistent finish. Embedded with sharp abrasive, these discs have a nylon mesh backing that resists clogging and flexes to compensate for uneven pressure. They’re also known as non-woven or surface-conditioning discs. With silicon carbide abrasive, they cost less than discs with diamond abrasive but won’t last as long. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Pkg.
    Qty.
    Pkg.
    TR Style Quick-Change Connector
     
    For Extra-Smooth Finish
    2"Silicon Carbide3M Roloc, Norton Speed-Lok TRBricks, Aluminum, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrayVery Fine57743N1100000
    3"Silicon Carbide3M Roloc, Norton Speed-Lok TRBricks, Aluminum, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, StoneGrayVery Fine57743N1200000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     

    Uniform-Finish Hook and Loop Sanding Discs

    Image of Specification. Front orientation. Contains Inset. Sanding Discs. Uniform-Finish Hook and Loop Sanding Discs.

    Create an exceptionally even finish when repairing scratches and other imperfections. These discs have a brick-shaped abrasive pattern that resists buildup and lasts longer than standard hook-and-loop discs. They have up to four times more abrasive and the wide gaps between the layers won’t trap dust and debris. The hook-and-loop backing lets you easily switch from one disc to another. Pair with a compatible sanding tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Each
    Dia.
    Mfr.
    Series
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    1-49
    50-Up
    Aluminum Oxide Abrasive
     
    For Rough Finish
    5"3M TrizactClothAluminum, Brass, Bronze, Copper, Plastic, Rubber, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders607854N1020000000000
     
    For Smooth Finish
    5"3M TrizactClothAluminum, Brass, Bronze, Copper, Plastic, Rubber, Steel, WoodPortable Disc Sanders, Stationary Disc Sanders1007854N10100000000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Uniform Finish, Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Uniform Finish, Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"5/16"-24
    		10,0004724A47000000
     

    Extra-Flexible Hook and Loop Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Extra-Flexible Hook and Loop Sanding Discs.
    Sand complex shapes, corners, and edges with foam discs that conform to your workpiece. The open cell material holds liquid for seamless wet sanding. Discs are also washable, so give them a quick rinse if they clog. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair discs with a compatible sanding tool or backup pad.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Each
    Silicon Carbide Abrasive
     
    For Smooth Finish
    6"FoamSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1804205A2100000
     
    For Extra-Smooth Finish
    6"FoamSteel, WoodPortable Disc Sanders, Stationary Disc Sanders3604205A220000
     
    For Polished Finish
    6"FoamSteel, WoodPortable Disc Sanders, Stationary Disc Sanders5004205A230000
    6"FoamSteel, WoodPortable Disc Sanders, Stationary Disc Sanders10004205A240000
    6"FoamSteel, WoodPortable Disc Sanders, Stationary Disc Sanders12004205A260000
    6"FoamSteel, WoodPortable Disc Sanders, Stationary Disc Sanders20004205A250000
     

    Nylon Mesh Quick-Change Sanding Discs for Threaded Studs

    Image of ProductInUse. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Threaded Studs.
    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Discs for Threaded Studs.
    Image of Specification. Front orientation. TR. Surface Conditioning, Discs.

    TR

    Remove rust and corrosion from surfaces with protruding studs, such as brake hubs and flanges. These discs include a hollow attachment tool that surrounds the stud, so you can sand right up to its base. Since the tool is plastic, it won’t damage the stud’s threads. Also known as non-woven or surface-conditioning discs, they're made of abrasive-embedded nylon mesh, which resists clogging and flexes to compensate for uneven sanding pressure. The connector on the back lets you swap discs in seconds.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Sanding Discs
    Replacement
    Discs
    Dia.
    Abrasive
    Material
    Hole
    Dia.
    Mfr. Equiv.
    Model
    For Use On
    Color
    Nylon Mesh
    Grade
    Includes
    Each
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    1 1/2"Silicon Carbide5/8"3M RolocSteel, WoodPurpleExtra CoarseFive Sanding Discs
    Quick-Change Attachment Tool    		8119N1010000008119N10200000
     

    Long-Life Trimmable Arbor-Mount Flap Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Long-Life Trimmable Arbor-Mount Flap Sanding Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    With more abrasive flaps, these discs last longer than other trimmable flap sanding discs. Trim the soft plastic backing plate as the flaps wear down and you won't have to replace the disc until all the abrasive is gone. To sand contoured and irregular surfaces, adjust how much the flaps overhang the backing plate. Discs mount onto your tool’s arbor.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Arbor Hole
    Dia.
    Arbor
    Hole
    Abrasive Backing
    Material
    Disc
    Shape
    For Use On
    For Use With
    Backing Plate
    Material
    Max. Rotation
    Speed, rpm
    Choose
    a Grit
    Each
    Zirconia Alumina Abrasive
     
    For Rough Finish
    4 1/2"7/8"UnthreadedClothFlatSteel, WoodAngle GrindersPlastic13,30040, 60, 806689N1700000
    5"7/8"UnthreadedClothFlatSteel, WoodAngle GrindersPlastic12,20040, 60, 806689N1800000
     

    Adhesive-Back Vacuum Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Vacuum Sanding Discs for Stainless Steel and Hard Metals.
    Cut hard metals without dulling your disc or making a mess. These discs have sharp and durable abrasive. The holes let dust clear into your vacuum sander to prevent buildup and premature wear. Choose the hole configuration that matches your backup pad and sander. Press discs onto tools or pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.
    Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Ceramic Alumina Abrasive
     
    For Rough Finish
    5"53/8"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders60106649N11000000
    5"53/8"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80106649N1200000
    5"53/8"PlasticIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders60106649N1600000
    5"53/8"PlasticIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders80106649N1400000
     
    For Smooth Finish
    5"53/8"PaperIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders120106649N1300000
    5"53/8"PlasticIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders120106649N1500000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Adhesive Back.
    Image of Product. Back. Back orientation. Backup Pads. Adhesive Back.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Adhesive-Back Discs
    5"55/16"-24
    		13,0004709A51000000
     

    Clog-Resistant Quick-Change Flap Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Clog-Resistant Quick-Change Flap Sanding Discs for Stainless Steel and Hard Metals.
    Image of Specification. Front orientation. Contains Border. TR. Clog Resistant, Flap Discs.

    TR

    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    Flat

    A slick coating on the flaps prevents buildup when sanding hard metals. These discs have sharp, durable abrasive on overlapping flaps that conform to bumps and contours for an even finish. As the top layer of abrasive wears away, a new layer is exposed, so they last longer than discs without flaps. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Mfr. Equiv. Model
    Abrasive
    Material
    Abrasive Backing
    Material
    Backing Plate
    Material
    Disc
    Shape
    For Use On
    Choose
    a Grit
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish
    2"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium40, 60, 808103N201000000
    3"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium40, 60, 808103N20200000
     
    For Smooth Finish
    2"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium1208103N12100000
    3"3M Roloc, Norton Speed-Lok TRCeramic AluminaClothPlasticFlatIron, Nickel, Stainless Steel, Steel, Titanium1208103N10800000
     
    Backup Pads
    Image of ProductInUse. Front orientation. Backup Pads. Quick-Change-Fastener Mount.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     

    Quick-Change Flap Sanding Discs for Inside Corner Welds

    Image of ProductInUse. Front orientation. Contains Border. Sanding Discs. Quick-Change Flap Sanding Discs for Inside Corner Welds.
    Image of Product. Front orientation. Sanding Discs. Quick-Change Flap Sanding Discs for Inside Corner Welds.
    Image of Specification. Front orientation. Contains Border. X-Lock. Flap Discs.
    Image of Specification. Flat. Front orientation. Flat Disc. Flap Discs.

    X-Lock

    Flat

    Sweep these discs into corners to hit welds at the perfect angle. The abrasive flaps wrap around the disc’s outer edge to reach and sand right-angle (fillet) welds. As the top layer of abrasive wears away, a new layer is exposed, so these last longer than discs without flaps. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    X-Lock—An X-shaped arbor hole quickly clicks into and out of X-Lock grinders without a wrench or flange nut. Also compatible with 7/8" arbors, these discs don't need a backup pad.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Flat Disc—The standard shape.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Mfr. Equiv.
    Model
    Abrasive
    Material
    Abrasive Backing
    Material
    Backing Plate
    Material
    Disc
    Shape
    For Use On
    Grit
    Each
    X-Lock Style Quick-Change Connector
     
    For Rough Finish
    4 1/2"X-LockZirconia AluminaClothFiberglassFlatSteel, Wood406379N11000000
    4 1/2"X-LockZirconia AluminaClothFiberglassFlatSteel, Wood406379N1200000
     

    Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Sanding Discs, Adhesive Back.

    Adhesive Back

    Image of Product. Front orientation. Sanding Discs. Sanding Discs, Hook and Loop.

    Hook and Loop

    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. Sanding Discs, Hook and Loop, For Vacuum Sanders.

    For Five-Hole

    Vacuum Sanders

    Switch from one grit to another without wasting discs. The hook-and-loop mount makes these discs reusable—unlike adhesive-back discs, which are one and done. Pair with a compatible sanding tool or backup pad.
    Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Pair these discs with a vacuum sander to keep your workspace clean. Dust is drawn away through the holes instead of floating into the air or building up on the abrasive. The hook-and-loop mount lets you switch grits without scrapping the disc, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Dia.
    For Use On
    Abrasive
    Material
    Abrasive Backing
    Material
    For Use With
    For No. of
    Vacuum Holes
    Pkg.
    Qty.
    Pkg.
    Adhesive Back
     
    For Polished Finish
    2"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—504521A35000000
    3"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—104521A3600000
    5"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A3700000
    6"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A3800000
     
    Hook and Loop
     
    For Polished Finish
    2"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—504521A4600000
    3"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—104521A4700000
    5"Steel, WoodAluminum OxideClothPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders5104521A5200000
    5"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A4800000
    5"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders5104521A5100000
    6"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A4900000
     

    Disc Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Disc Sanding Discs for Stainless Steel and Hard Metals, Adhesive Back.

    Adhesive Back

    Image of Product. Front orientation. Sanding Discs. Disc Sanding Discs for Stainless Steel and Hard Metals, Hook and Loop.

    Hook and Loop

    The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Dia.
    For Use On
    Abrasive
    Material
    Abrasive Backing
    Material
    For Use With
    Pkg.
    Qty.
    Pkg.
    Adhesive Back
     
    For Polished Finish
    4"Iron, Nickel, Stainless Steel, Steel, TitaniumAluminum OxideClothGrinders for Bits and Burs, Portable Disc Sanders104521A41000000
    4"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders104521A3900000
    5"Iron, Nickel, Stainless Steel, Steel, TitaniumAluminum OxideClothPortable Disc Sanders, Stationary Disc Sanders104521A4300000
    5"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A4200000
    6"Iron, Nickel, Stainless Steel, Steel, TitaniumAluminum OxideClothPortable Disc Sanders, Stationary Disc Sanders104521A4500000
    6"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A4400000
     
    Hook and Loop
     
    For Polished Finish
    2"Iron, Nickel, Stainless Steel, Steel, TitaniumAluminum OxideClothGrinders for Bits and Burs, Portable Disc Sanders504521A6100000
    2"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders504521A5900000
    3"Iron, Nickel, Stainless Steel, Steel, TitaniumAluminum OxideClothGrinders for Bits and Burs, Portable Disc Sanders104521A5400000
    3"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders104521A5300000
    5"Iron, Nickel, Stainless Steel, Steel, TitaniumAluminum OxideClothPortable Disc Sanders, Stationary Disc Sanders104521A5600000
    5"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A5500000
    6"Iron, Nickel, Stainless Steel, Steel, TitaniumAluminum OxideClothPortable Disc Sanders, Stationary Disc Sanders104521A5800000
    6"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A5700000
     
    back to top